net: fec_mxc: Add support for mx6 solo-lite

Similarly as mx25 and mx53, mx6solo-lite needs to setup the MII gasket for RMII
mode.

Add support for mx6solo-lite.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>

diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index 690e5724b4e57418c50a17306d8b340857ec15a0..210ef02df53dbf9ba332e91c3b428b981807342d 100644 (file)
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -453,7 +453,7 @@ static int fec_open(struct eth_device *edev)
         */
        writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_ETHER_EN,
                &fec->eth->ecntrl);
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
        udelay(100);
        /*
         * setup the MII gasket for RMII mode

diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h
index 4b4f8b798335e0c7c1f086643bb56a2c034b1bcb..0717cc6c3105c087b78fc3fc1bc63e9caced014f 100644 (file)
--- a/drivers/net/fec_mxc.h
+++ b/drivers/net/fec_mxc.h
@@ -135,7 +135,7 @@ struct ethernet_regs {
 
        uint32_t res14[7];              /* MBAR_ETH + 0x2E4-2FC */
 
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
        uint16_t miigsk_cfgr;           /* MBAR_ETH + 0x300 */
        uint16_t res15[3];              /* MBAR_ETH + 0x302-306 */
        uint16_t miigsk_enr;            /* MBAR_ETH + 0x308 */
@@ -202,7 +202,7 @@ struct ethernet_regs {
 #define FEC_X_DES_ACTIVE_TDAR          0x01000000
 #define FEC_R_DES_ACTIVE_RDAR          0x01000000
 
-#if defined(CONFIG_MX25) || defined(CONFIG_MX53)
+#if defined(CONFIG_MX25) || defined(CONFIG_MX53) || defined(CONFIG_MX6SL)
 /* defines for MIIGSK */
 /* RMII frequency control: 0=50MHz, 1=5MHz */
 #define MIIGSK_CFGR_FRCONT             (1 << 6)