]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
clk: rockchip: Add rk3588 clk support
authorJagan Teki <jagan@edgeble.ai>
Mon, 30 Jan 2023 14:57:36 +0000 (20:27 +0530)
committerKever Yang <kever.yang@rock-chips.com>
Tue, 28 Feb 2023 10:07:27 +0000 (18:07 +0800)
Add clock driver support for Rockchip RK3588 SoC.

Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
drivers/clk/rockchip/Makefile
drivers/clk/rockchip/clk_rk3588.c [new file with mode: 0644]

index f719f4e3791466a5307918ab5c74435fc36feb18..9e379cc2e3b6f129e149d4babf5d15f4fb6dd8bc 100644 (file)
@@ -16,5 +16,6 @@ obj-$(CONFIG_ROCKCHIP_RK3328) += clk_rk3328.o
 obj-$(CONFIG_ROCKCHIP_RK3368) += clk_rk3368.o
 obj-$(CONFIG_ROCKCHIP_RK3399) += clk_rk3399.o
 obj-$(CONFIG_ROCKCHIP_RK3568) += clk_rk3568.o
+obj-$(CONFIG_ROCKCHIP_RK3588) += clk_rk3588.o
 obj-$(CONFIG_ROCKCHIP_RV1108) += clk_rv1108.o
 obj-$(CONFIG_ROCKCHIP_RV1126) += clk_rv1126.o
diff --git a/drivers/clk/rockchip/clk_rk3588.c b/drivers/clk/rockchip/clk_rk3588.c
new file mode 100644 (file)
index 0000000..5271d94
--- /dev/null
@@ -0,0 +1,1996 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 Fuzhou Rockchip Electronics Co., Ltd
+ * Author: Elaine Zhang <zhangqing@rock-chips.com>
+ */
+
+#include <common.h>
+#include <bitfield.h>
+#include <clk-uclass.h>
+#include <dm.h>
+#include <errno.h>
+#include <syscon.h>
+#include <asm/arch-rockchip/cru_rk3588.h>
+#include <asm/arch-rockchip/clock.h>
+#include <asm/arch-rockchip/hardware.h>
+#include <asm/io.h>
+#include <dm/device-internal.h>
+#include <dm/lists.h>
+#include <dt-bindings/clock/rockchip,rk3588-cru.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define DIV_TO_RATE(input_rate, div)   ((input_rate) / ((div) + 1))
+
+static struct rockchip_pll_rate_table rk3588_pll_rates[] = {
+       /* _mhz, _p, _m, _s, _k */
+       RK3588_PLL_RATE(1500000000, 2, 250, 1, 0),
+       RK3588_PLL_RATE(1200000000, 2, 200, 1, 0),
+       RK3588_PLL_RATE(1188000000, 2, 198, 1, 0),
+       RK3588_PLL_RATE(1100000000, 3, 550, 2, 0),
+       RK3588_PLL_RATE(1008000000, 2, 336, 2, 0),
+       RK3588_PLL_RATE(1000000000, 3, 500, 2, 0),
+       RK3588_PLL_RATE(900000000, 2, 300, 2, 0),
+       RK3588_PLL_RATE(850000000, 3, 425, 2, 0),
+       RK3588_PLL_RATE(816000000, 2, 272, 2, 0),
+       RK3588_PLL_RATE(786432000, 2, 262, 2, 9437),
+       RK3588_PLL_RATE(786000000, 1, 131, 2, 0),
+       RK3588_PLL_RATE(722534400, 8, 963, 2, 24850),
+       RK3588_PLL_RATE(600000000, 2, 200, 2, 0),
+       RK3588_PLL_RATE(594000000, 2, 198, 2, 0),
+       RK3588_PLL_RATE(200000000, 3, 400, 4, 0),
+       RK3588_PLL_RATE(100000000, 3, 400, 5, 0),
+       { /* sentinel */ },
+};
+
+static struct rockchip_pll_clock rk3588_pll_clks[] = {
+       [B0PLL] = PLL(pll_rk3588, PLL_B0PLL, RK3588_B0_PLL_CON(0),
+                     RK3588_B0_PLL_MODE_CON, 0, 15, 0,
+                     rk3588_pll_rates),
+       [B1PLL] = PLL(pll_rk3588, PLL_B1PLL, RK3588_B1_PLL_CON(8),
+                     RK3588_B1_PLL_MODE_CON, 0, 15, 0,
+                     rk3588_pll_rates),
+       [LPLL] = PLL(pll_rk3588, PLL_LPLL, RK3588_LPLL_CON(16),
+                    RK3588_LPLL_MODE_CON, 0, 15, 0, rk3588_pll_rates),
+       [V0PLL] = PLL(pll_rk3588, PLL_V0PLL, RK3588_PLL_CON(88),
+                     RK3588_MODE_CON0, 4, 15, 0, rk3588_pll_rates),
+       [AUPLL] = PLL(pll_rk3588, PLL_AUPLL, RK3588_PLL_CON(96),
+                     RK3588_MODE_CON0, 6, 15, 0, rk3588_pll_rates),
+       [CPLL] = PLL(pll_rk3588, PLL_CPLL, RK3588_PLL_CON(104),
+                    RK3588_MODE_CON0, 8, 15, 0, rk3588_pll_rates),
+       [GPLL] = PLL(pll_rk3588, PLL_GPLL, RK3588_PLL_CON(112),
+                    RK3588_MODE_CON0, 2, 15, 0, rk3588_pll_rates),
+       [NPLL] = PLL(pll_rk3588, PLL_NPLL, RK3588_PLL_CON(120),
+                    RK3588_MODE_CON0, 0, 15, 0, rk3588_pll_rates),
+       [PPLL] = PLL(pll_rk3588, PLL_PPLL, RK3588_PMU_PLL_CON(128),
+                    RK3588_MODE_CON0, 10, 15, 0, rk3588_pll_rates),
+};
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ *
+ * rational_best_approximation(31415, 10000,
+ *             (1 << 8) - 1, (1 << 5) - 1, &n, &d);
+ *
+ * you may look at given_numerator as a fixed point number,
+ * with the fractional part size described in given_denominator.
+ *
+ * for theoretical background, see:
+ * http://en.wikipedia.org/wiki/Continued_fraction
+ */
+static void rational_best_approximation(unsigned long given_numerator,
+                                       unsigned long given_denominator,
+                                       unsigned long max_numerator,
+                                       unsigned long max_denominator,
+                                       unsigned long *best_numerator,
+                                       unsigned long *best_denominator)
+{
+       unsigned long n, d, n0, d0, n1, d1;
+
+       n = given_numerator;
+       d = given_denominator;
+       n0 = 0;
+       d1 = 0;
+       n1 = 1;
+       d0 = 1;
+       for (;;) {
+               unsigned long t, a;
+
+               if (n1 > max_numerator || d1 > max_denominator) {
+                       n1 = n0;
+                       d1 = d0;
+                       break;
+               }
+               if (d == 0)
+                       break;
+               t = d;
+               a = n / d;
+               d = n % d;
+               n = t;
+               t = n0 + a * n1;
+               n0 = n1;
+               n1 = t;
+               t = d0 + a * d1;
+               d0 = d1;
+               d1 = t;
+       }
+       *best_numerator = n1;
+       *best_denominator = d1;
+}
+#endif
+
+static ulong rk3588_center_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 con, sel, rate;
+
+       switch (clk_id) {
+       case ACLK_CENTER_ROOT:
+               con = readl(&cru->clksel_con[165]);
+               sel = (con & ACLK_CENTER_ROOT_SEL_MASK) >>
+                     ACLK_CENTER_ROOT_SEL_SHIFT;
+               if (sel == ACLK_CENTER_ROOT_SEL_700M)
+                       rate = 702 * MHz;
+               else if (sel == ACLK_CENTER_ROOT_SEL_400M)
+                       rate = 396 * MHz;
+               else if (sel == ACLK_CENTER_ROOT_SEL_200M)
+                       rate = 200 * MHz;
+               else
+                       rate = OSC_HZ;
+               break;
+       case ACLK_CENTER_LOW_ROOT:
+               con = readl(&cru->clksel_con[165]);
+               sel = (con & ACLK_CENTER_LOW_ROOT_SEL_MASK) >>
+                     ACLK_CENTER_LOW_ROOT_SEL_SHIFT;
+               if (sel == ACLK_CENTER_LOW_ROOT_SEL_500M)
+                       rate = 500 * MHz;
+               else if (sel == ACLK_CENTER_LOW_ROOT_SEL_250M)
+                       rate = 250 * MHz;
+               else if (sel == ACLK_CENTER_LOW_ROOT_SEL_100M)
+                       rate = 100 * MHz;
+               else
+                       rate = OSC_HZ;
+               break;
+       case HCLK_CENTER_ROOT:
+               con = readl(&cru->clksel_con[165]);
+               sel = (con & HCLK_CENTER_ROOT_SEL_MASK) >>
+                     HCLK_CENTER_ROOT_SEL_SHIFT;
+               if (sel == HCLK_CENTER_ROOT_SEL_400M)
+                       rate = 396 * MHz;
+               else if (sel == HCLK_CENTER_ROOT_SEL_200M)
+                       rate = 200 * MHz;
+               else if (sel == HCLK_CENTER_ROOT_SEL_100M)
+                       rate = 100 * MHz;
+               else
+                       rate = OSC_HZ;
+               break;
+       case PCLK_CENTER_ROOT:
+               con = readl(&cru->clksel_con[165]);
+               sel = (con & PCLK_CENTER_ROOT_SEL_MASK) >>
+                     PCLK_CENTER_ROOT_SEL_SHIFT;
+               if (sel == PCLK_CENTER_ROOT_SEL_200M)
+                       rate = 200 * MHz;
+               else if (sel == PCLK_CENTER_ROOT_SEL_100M)
+                       rate = 100 * MHz;
+               else if (sel == PCLK_CENTER_ROOT_SEL_50M)
+                       rate = 50 * MHz;
+               else
+                       rate = OSC_HZ;
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rate;
+}
+
+static ulong rk3588_center_set_clk(struct rk3588_clk_priv *priv,
+                                  ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk;
+
+       switch (clk_id) {
+       case ACLK_CENTER_ROOT:
+               if (rate >= 700 * MHz)
+                       src_clk = ACLK_CENTER_ROOT_SEL_700M;
+               else if (rate >= 396 * MHz)
+                       src_clk = ACLK_CENTER_ROOT_SEL_400M;
+               else if (rate >= 200 * MHz)
+                       src_clk = ACLK_CENTER_ROOT_SEL_200M;
+               else
+                       src_clk = ACLK_CENTER_ROOT_SEL_24M;
+               rk_clrsetreg(&cru->clksel_con[165],
+                            ACLK_CENTER_ROOT_SEL_MASK,
+                            src_clk << ACLK_CENTER_ROOT_SEL_SHIFT);
+               break;
+       case ACLK_CENTER_LOW_ROOT:
+               if (rate >= 500 * MHz)
+                       src_clk = ACLK_CENTER_LOW_ROOT_SEL_500M;
+               else if (rate >= 250 * MHz)
+                       src_clk = ACLK_CENTER_LOW_ROOT_SEL_250M;
+               else if (rate >= 99 * MHz)
+                       src_clk = ACLK_CENTER_LOW_ROOT_SEL_100M;
+               else
+                       src_clk = ACLK_CENTER_LOW_ROOT_SEL_24M;
+               rk_clrsetreg(&cru->clksel_con[165],
+                            ACLK_CENTER_LOW_ROOT_SEL_MASK,
+                            src_clk << ACLK_CENTER_LOW_ROOT_SEL_SHIFT);
+               break;
+       case HCLK_CENTER_ROOT:
+               if (rate >= 396 * MHz)
+                       src_clk = HCLK_CENTER_ROOT_SEL_400M;
+               else if (rate >= 198 * MHz)
+                       src_clk = HCLK_CENTER_ROOT_SEL_200M;
+               else if (rate >= 99 * MHz)
+                       src_clk = HCLK_CENTER_ROOT_SEL_100M;
+               else
+                       src_clk = HCLK_CENTER_ROOT_SEL_24M;
+               rk_clrsetreg(&cru->clksel_con[165],
+                            HCLK_CENTER_ROOT_SEL_MASK,
+                            src_clk << HCLK_CENTER_ROOT_SEL_SHIFT);
+               break;
+       case PCLK_CENTER_ROOT:
+               if (rate >= 198 * MHz)
+                       src_clk = PCLK_CENTER_ROOT_SEL_200M;
+               else if (rate >= 99 * MHz)
+                       src_clk = PCLK_CENTER_ROOT_SEL_100M;
+               else if (rate >= 50 * MHz)
+                       src_clk = PCLK_CENTER_ROOT_SEL_50M;
+               else
+                       src_clk = PCLK_CENTER_ROOT_SEL_24M;
+               rk_clrsetreg(&cru->clksel_con[165],
+                            PCLK_CENTER_ROOT_SEL_MASK,
+                            src_clk << PCLK_CENTER_ROOT_SEL_SHIFT);
+               break;
+       default:
+               printf("do not support this center freq\n");
+               return -EINVAL;
+       }
+
+       return rk3588_center_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_top_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 con, sel, div, rate, prate;
+
+       switch (clk_id) {
+       case ACLK_TOP_ROOT:
+               con = readl(&cru->clksel_con[8]);
+               div = (con & ACLK_TOP_ROOT_DIV_MASK) >>
+                     ACLK_TOP_ROOT_DIV_SHIFT;
+               sel = (con & ACLK_TOP_ROOT_SRC_SEL_MASK) >>
+                     ACLK_TOP_ROOT_SRC_SEL_SHIFT;
+               if (sel == ACLK_TOP_ROOT_SRC_SEL_CPLL)
+                       prate = priv->cpll_hz;
+               else
+                       prate = priv->gpll_hz;
+               return DIV_TO_RATE(prate, div);
+       case ACLK_LOW_TOP_ROOT:
+               con = readl(&cru->clksel_con[8]);
+               div = (con & ACLK_LOW_TOP_ROOT_DIV_MASK) >>
+                     ACLK_LOW_TOP_ROOT_DIV_SHIFT;
+               sel = (con & ACLK_LOW_TOP_ROOT_SRC_SEL_MASK) >>
+                     ACLK_LOW_TOP_ROOT_SRC_SEL_SHIFT;
+               if (sel == ACLK_LOW_TOP_ROOT_SRC_SEL_CPLL)
+                       prate = priv->cpll_hz;
+               else
+                       prate = priv->gpll_hz;
+               return DIV_TO_RATE(prate, div);
+       case PCLK_TOP_ROOT:
+               con = readl(&cru->clksel_con[8]);
+               sel = (con & PCLK_TOP_ROOT_SEL_MASK) >> PCLK_TOP_ROOT_SEL_SHIFT;
+               if (sel == PCLK_TOP_ROOT_SEL_100M)
+                       rate = 100 * MHz;
+               else if (sel == PCLK_TOP_ROOT_SEL_50M)
+                       rate = 50 * MHz;
+               else
+                       rate = OSC_HZ;
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rate;
+}
+
+static ulong rk3588_top_set_clk(struct rk3588_clk_priv *priv,
+                               ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk, src_clk_div;
+
+       switch (clk_id) {
+       case ACLK_TOP_ROOT:
+               src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate);
+               assert(src_clk_div - 1 <= 31);
+               rk_clrsetreg(&cru->clksel_con[8],
+                            ACLK_TOP_ROOT_DIV_MASK |
+                            ACLK_TOP_ROOT_SRC_SEL_MASK,
+                            (ACLK_TOP_ROOT_SRC_SEL_GPLL <<
+                             ACLK_TOP_ROOT_SRC_SEL_SHIFT) |
+                            (src_clk_div - 1) << ACLK_TOP_ROOT_DIV_SHIFT);
+               break;
+       case ACLK_LOW_TOP_ROOT:
+               src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate);
+               assert(src_clk_div - 1 <= 31);
+               rk_clrsetreg(&cru->clksel_con[8],
+                            ACLK_LOW_TOP_ROOT_DIV_MASK |
+                            ACLK_LOW_TOP_ROOT_SRC_SEL_MASK,
+                            (ACLK_LOW_TOP_ROOT_SRC_SEL_GPLL <<
+                             ACLK_LOW_TOP_ROOT_SRC_SEL_SHIFT) |
+                            (src_clk_div - 1) << ACLK_LOW_TOP_ROOT_DIV_SHIFT);
+               break;
+       case PCLK_TOP_ROOT:
+               if (rate == 100 * MHz)
+                       src_clk = PCLK_TOP_ROOT_SEL_100M;
+               else if (rate == 50 * MHz)
+                       src_clk = PCLK_TOP_ROOT_SEL_50M;
+               else
+                       src_clk = PCLK_TOP_ROOT_SEL_24M;
+               rk_clrsetreg(&cru->clksel_con[8],
+                            PCLK_TOP_ROOT_SEL_MASK,
+                            src_clk << PCLK_TOP_ROOT_SEL_SHIFT);
+               break;
+       default:
+               printf("do not support this top freq\n");
+               return -EINVAL;
+       }
+
+       return rk3588_top_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_i2c_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 sel, con;
+       ulong rate;
+
+       switch (clk_id) {
+       case CLK_I2C0:
+               con = readl(&cru->pmuclksel_con[3]);
+               sel = (con & CLK_I2C0_SEL_MASK) >> CLK_I2C0_SEL_SHIFT;
+               break;
+       case CLK_I2C1:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C1_SEL_MASK) >> CLK_I2C1_SEL_SHIFT;
+               break;
+       case CLK_I2C2:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C2_SEL_MASK) >> CLK_I2C2_SEL_SHIFT;
+               break;
+       case CLK_I2C3:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C3_SEL_MASK) >> CLK_I2C3_SEL_SHIFT;
+               break;
+       case CLK_I2C4:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C4_SEL_MASK) >> CLK_I2C4_SEL_SHIFT;
+               break;
+       case CLK_I2C5:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C5_SEL_MASK) >> CLK_I2C5_SEL_SHIFT;
+               break;
+       case CLK_I2C6:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C6_SEL_MASK) >> CLK_I2C6_SEL_SHIFT;
+               break;
+       case CLK_I2C7:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C7_SEL_MASK) >> CLK_I2C7_SEL_SHIFT;
+               break;
+       case CLK_I2C8:
+               con = readl(&cru->clksel_con[38]);
+               sel = (con & CLK_I2C8_SEL_MASK) >> CLK_I2C8_SEL_SHIFT;
+               break;
+       default:
+               return -ENOENT;
+       }
+       if (sel == CLK_I2C_SEL_200M)
+               rate = 200 * MHz;
+       else
+               rate = 100 * MHz;
+
+       return rate;
+}
+
+static ulong rk3588_i2c_set_clk(struct rk3588_clk_priv *priv, ulong clk_id,
+                               ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk;
+
+       if (rate >= 198 * MHz)
+               src_clk = CLK_I2C_SEL_200M;
+       else
+               src_clk = CLK_I2C_SEL_100M;
+
+       switch (clk_id) {
+       case CLK_I2C0:
+               rk_clrsetreg(&cru->pmuclksel_con[3], CLK_I2C0_SEL_MASK,
+                            src_clk << CLK_I2C0_SEL_SHIFT);
+               break;
+       case CLK_I2C1:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C1_SEL_MASK,
+                            src_clk << CLK_I2C1_SEL_SHIFT);
+               break;
+       case CLK_I2C2:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C2_SEL_MASK,
+                            src_clk << CLK_I2C2_SEL_SHIFT);
+               break;
+       case CLK_I2C3:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C3_SEL_MASK,
+                            src_clk << CLK_I2C3_SEL_SHIFT);
+               break;
+       case CLK_I2C4:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C4_SEL_MASK,
+                            src_clk << CLK_I2C4_SEL_SHIFT);
+               break;
+       case CLK_I2C5:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C5_SEL_MASK,
+                            src_clk << CLK_I2C5_SEL_SHIFT);
+               break;
+       case CLK_I2C6:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C6_SEL_MASK,
+                            src_clk << CLK_I2C6_SEL_SHIFT);
+               break;
+       case CLK_I2C7:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C7_SEL_MASK,
+                            src_clk << CLK_I2C7_SEL_SHIFT);
+               break;
+       case CLK_I2C8:
+               rk_clrsetreg(&cru->clksel_con[38], CLK_I2C8_SEL_MASK,
+                            src_clk << CLK_I2C8_SEL_SHIFT);
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_i2c_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_spi_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 sel, con;
+
+       con = readl(&cru->clksel_con[59]);
+
+       switch (clk_id) {
+       case CLK_SPI0:
+               sel = (con & CLK_SPI0_SEL_MASK) >> CLK_SPI0_SEL_SHIFT;
+               break;
+       case CLK_SPI1:
+               sel = (con & CLK_SPI1_SEL_MASK) >> CLK_SPI1_SEL_SHIFT;
+               break;
+       case CLK_SPI2:
+               sel = (con & CLK_SPI2_SEL_MASK) >> CLK_SPI2_SEL_SHIFT;
+               break;
+       case CLK_SPI3:
+               sel = (con & CLK_SPI3_SEL_MASK) >> CLK_SPI3_SEL_SHIFT;
+               break;
+       case CLK_SPI4:
+               sel = (con & CLK_SPI4_SEL_MASK) >> CLK_SPI4_SEL_SHIFT;
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       switch (sel) {
+       case CLK_SPI_SEL_200M:
+               return 200 * MHz;
+       case CLK_SPI_SEL_150M:
+               return 150 * MHz;
+       case CLK_SPI_SEL_24M:
+               return OSC_HZ;
+       default:
+               return -ENOENT;
+       }
+}
+
+static ulong rk3588_spi_set_clk(struct rk3588_clk_priv *priv,
+                               ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk;
+
+       if (rate >= 198 * MHz)
+               src_clk = CLK_SPI_SEL_200M;
+       else if (rate >= 140 * MHz)
+               src_clk = CLK_SPI_SEL_150M;
+       else
+               src_clk = CLK_SPI_SEL_24M;
+
+       switch (clk_id) {
+       case CLK_SPI0:
+               rk_clrsetreg(&cru->clksel_con[59],
+                            CLK_SPI0_SEL_MASK,
+                            src_clk << CLK_SPI0_SEL_SHIFT);
+               break;
+       case CLK_SPI1:
+               rk_clrsetreg(&cru->clksel_con[59],
+                            CLK_SPI1_SEL_MASK,
+                            src_clk << CLK_SPI1_SEL_SHIFT);
+               break;
+       case CLK_SPI2:
+               rk_clrsetreg(&cru->clksel_con[59],
+                            CLK_SPI2_SEL_MASK,
+                            src_clk << CLK_SPI2_SEL_SHIFT);
+               break;
+       case CLK_SPI3:
+               rk_clrsetreg(&cru->clksel_con[59],
+                            CLK_SPI3_SEL_MASK,
+                            src_clk << CLK_SPI3_SEL_SHIFT);
+               break;
+       case CLK_SPI4:
+               rk_clrsetreg(&cru->clksel_con[59],
+                            CLK_SPI4_SEL_MASK,
+                            src_clk << CLK_SPI4_SEL_SHIFT);
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_spi_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_pwm_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 sel, con;
+
+       switch (clk_id) {
+       case CLK_PWM1:
+               con = readl(&cru->clksel_con[59]);
+               sel = (con & CLK_PWM1_SEL_MASK) >> CLK_PWM1_SEL_SHIFT;
+               break;
+       case CLK_PWM2:
+               con = readl(&cru->clksel_con[59]);
+               sel = (con & CLK_PWM2_SEL_MASK) >> CLK_PWM2_SEL_SHIFT;
+               break;
+       case CLK_PWM3:
+               con = readl(&cru->clksel_con[60]);
+               sel = (con & CLK_PWM3_SEL_MASK) >> CLK_PWM3_SEL_SHIFT;
+               break;
+       case CLK_PMU1PWM:
+               con = readl(&cru->pmuclksel_con[2]);
+               sel = (con & CLK_PMU1PWM_SEL_MASK) >> CLK_PMU1PWM_SEL_SHIFT;
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       switch (sel) {
+       case CLK_PWM_SEL_100M:
+               return 100 * MHz;
+       case CLK_PWM_SEL_50M:
+               return 50 * MHz;
+       case CLK_PWM_SEL_24M:
+               return OSC_HZ;
+       default:
+               return -ENOENT;
+       }
+}
+
+static ulong rk3588_pwm_set_clk(struct rk3588_clk_priv *priv,
+                               ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk;
+
+       if (rate >= 99 * MHz)
+               src_clk = CLK_PWM_SEL_100M;
+       else if (rate >= 50 * MHz)
+               src_clk = CLK_PWM_SEL_50M;
+       else
+               src_clk = CLK_PWM_SEL_24M;
+
+       switch (clk_id) {
+       case CLK_PWM1:
+               rk_clrsetreg(&cru->clksel_con[59],
+                            CLK_PWM1_SEL_MASK,
+                            src_clk << CLK_PWM1_SEL_SHIFT);
+               break;
+       case CLK_PWM2:
+               rk_clrsetreg(&cru->clksel_con[59],
+                            CLK_PWM2_SEL_MASK,
+                            src_clk << CLK_PWM2_SEL_SHIFT);
+               break;
+       case CLK_PWM3:
+               rk_clrsetreg(&cru->clksel_con[60],
+                            CLK_PWM3_SEL_MASK,
+                            src_clk << CLK_PWM3_SEL_SHIFT);
+               break;
+       case CLK_PMU1PWM:
+               rk_clrsetreg(&cru->pmuclksel_con[2],
+                            CLK_PMU1PWM_SEL_MASK,
+                            src_clk << CLK_PMU1PWM_SEL_SHIFT);
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_pwm_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_adc_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 div, sel, con, prate;
+
+       switch (clk_id) {
+       case CLK_SARADC:
+               con = readl(&cru->clksel_con[40]);
+               div = (con & CLK_SARADC_DIV_MASK) >> CLK_SARADC_DIV_SHIFT;
+               sel = (con & CLK_SARADC_SEL_MASK) >>
+                     CLK_SARADC_SEL_SHIFT;
+               if (sel == CLK_SARADC_SEL_24M)
+                       prate = OSC_HZ;
+               else
+                       prate = priv->gpll_hz;
+               return DIV_TO_RATE(prate, div);
+       case CLK_TSADC:
+               con = readl(&cru->clksel_con[41]);
+               div = (con & CLK_TSADC_DIV_MASK) >>
+                     CLK_TSADC_DIV_SHIFT;
+               sel = (con & CLK_TSADC_SEL_MASK) >>
+                     CLK_TSADC_SEL_SHIFT;
+               if (sel == CLK_TSADC_SEL_24M)
+                       prate = OSC_HZ;
+               else
+                       prate = 100 * MHz;
+               return DIV_TO_RATE(prate, div);
+       default:
+               return -ENOENT;
+       }
+}
+
+static ulong rk3588_adc_set_clk(struct rk3588_clk_priv *priv,
+                               ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk_div;
+
+       switch (clk_id) {
+       case CLK_SARADC:
+               if (!(OSC_HZ % rate)) {
+                       src_clk_div = DIV_ROUND_UP(OSC_HZ, rate);
+                       assert(src_clk_div - 1 <= 255);
+                       rk_clrsetreg(&cru->clksel_con[40],
+                                    CLK_SARADC_SEL_MASK |
+                                    CLK_SARADC_DIV_MASK,
+                                    (CLK_SARADC_SEL_24M <<
+                                     CLK_SARADC_SEL_SHIFT) |
+                                    (src_clk_div - 1) <<
+                                    CLK_SARADC_DIV_SHIFT);
+               } else {
+                       src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate);
+                       assert(src_clk_div - 1 <= 255);
+                       rk_clrsetreg(&cru->clksel_con[40],
+                                    CLK_SARADC_SEL_MASK |
+                                    CLK_SARADC_DIV_MASK,
+                                    (CLK_SARADC_SEL_GPLL <<
+                                     CLK_SARADC_SEL_SHIFT) |
+                                    (src_clk_div - 1) <<
+                                    CLK_SARADC_DIV_SHIFT);
+               }
+               break;
+       case CLK_TSADC:
+               if (!(OSC_HZ % rate)) {
+                       src_clk_div = DIV_ROUND_UP(OSC_HZ, rate);
+                       assert(src_clk_div - 1 <= 255);
+                       rk_clrsetreg(&cru->clksel_con[41],
+                                    CLK_TSADC_SEL_MASK |
+                                    CLK_TSADC_DIV_MASK,
+                                    (CLK_TSADC_SEL_24M <<
+                                     CLK_TSADC_SEL_SHIFT) |
+                                    (src_clk_div - 1) <<
+                                    CLK_TSADC_DIV_SHIFT);
+               } else {
+                       src_clk_div = DIV_ROUND_UP(priv->gpll_hz, rate);
+                       assert(src_clk_div - 1 <= 7);
+                       rk_clrsetreg(&cru->clksel_con[41],
+                                    CLK_TSADC_SEL_MASK |
+                                    CLK_TSADC_DIV_MASK,
+                                    (CLK_TSADC_SEL_GPLL <<
+                                     CLK_TSADC_SEL_SHIFT) |
+                                    (src_clk_div - 1) <<
+                                    CLK_TSADC_DIV_SHIFT);
+               }
+               break;
+       default:
+               return -ENOENT;
+       }
+       return rk3588_adc_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_mmc_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 sel, con, div, prate;
+
+       switch (clk_id) {
+       case CCLK_SRC_SDIO:
+               con = readl(&cru->clksel_con[172]);
+               div = (con & CCLK_SDIO_SRC_DIV_MASK) >> CCLK_SDIO_SRC_DIV_SHIFT;
+               sel = (con & CCLK_SDIO_SRC_SEL_MASK) >>
+                     CCLK_SDIO_SRC_SEL_SHIFT;
+               if (sel == CCLK_SDIO_SRC_SEL_GPLL)
+                       prate = priv->gpll_hz;
+               else if (sel == CCLK_SDIO_SRC_SEL_CPLL)
+                       prate = priv->cpll_hz;
+               else
+                       prate = OSC_HZ;
+               return DIV_TO_RATE(prate, div);
+       case CCLK_EMMC:
+               con = readl(&cru->clksel_con[77]);
+               div = (con & CCLK_EMMC_DIV_MASK) >> CCLK_EMMC_DIV_SHIFT;
+               sel = (con & CCLK_EMMC_SEL_MASK) >>
+                     CCLK_EMMC_SEL_SHIFT;
+               if (sel == CCLK_EMMC_SEL_GPLL)
+                       prate = priv->gpll_hz;
+               else if (sel == CCLK_EMMC_SEL_CPLL)
+                       prate = priv->cpll_hz;
+               else
+                       prate = OSC_HZ;
+               return DIV_TO_RATE(prate, div);
+       case BCLK_EMMC:
+               con = readl(&cru->clksel_con[78]);
+               div = (con & BCLK_EMMC_DIV_MASK) >> BCLK_EMMC_DIV_SHIFT;
+               sel = (con & BCLK_EMMC_SEL_MASK) >>
+                     BCLK_EMMC_SEL_SHIFT;
+               if (sel == CCLK_EMMC_SEL_CPLL)
+                       prate = priv->cpll_hz;
+               else
+                       prate = priv->gpll_hz;
+               return DIV_TO_RATE(prate, div);
+       case SCLK_SFC:
+               con = readl(&cru->clksel_con[78]);
+               div = (con & SCLK_SFC_DIV_MASK) >> SCLK_SFC_DIV_SHIFT;
+               sel = (con & SCLK_SFC_SEL_MASK) >>
+                     SCLK_SFC_SEL_SHIFT;
+               if (sel == SCLK_SFC_SEL_GPLL)
+                       prate = priv->gpll_hz;
+               else if (sel == SCLK_SFC_SEL_CPLL)
+                       prate = priv->cpll_hz;
+               else
+                       prate = OSC_HZ;
+               return DIV_TO_RATE(prate, div);
+       case DCLK_DECOM:
+               con = readl(&cru->clksel_con[62]);
+               div = (con & DCLK_DECOM_DIV_MASK) >> DCLK_DECOM_DIV_SHIFT;
+               sel = (con & DCLK_DECOM_SEL_MASK) >>
+                     DCLK_DECOM_SEL_SHIFT;
+               if (sel == DCLK_DECOM_SEL_SPLL)
+                       prate = 702 * MHz;
+               else
+                       prate = priv->gpll_hz;
+               return DIV_TO_RATE(prate, div);
+       default:
+               return -ENOENT;
+       }
+}
+
+static ulong rk3588_mmc_set_clk(struct rk3588_clk_priv *priv,
+                               ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk, div;
+
+       switch (clk_id) {
+       case CCLK_SRC_SDIO:
+       case CCLK_EMMC:
+       case SCLK_SFC:
+               if (!(OSC_HZ % rate)) {
+                       src_clk = SCLK_SFC_SEL_24M;
+                       div = DIV_ROUND_UP(OSC_HZ, rate);
+               } else if (!(priv->cpll_hz % rate)) {
+                       src_clk = SCLK_SFC_SEL_CPLL;
+                       div = DIV_ROUND_UP(priv->cpll_hz, rate);
+               } else {
+                       src_clk = SCLK_SFC_SEL_GPLL;
+                       div = DIV_ROUND_UP(priv->gpll_hz, rate);
+               }
+               break;
+       case BCLK_EMMC:
+               if (!(priv->cpll_hz % rate)) {
+                       src_clk = CCLK_EMMC_SEL_CPLL;
+                       div = DIV_ROUND_UP(priv->cpll_hz, rate);
+               } else {
+                       src_clk = CCLK_EMMC_SEL_GPLL;
+                       div = DIV_ROUND_UP(priv->gpll_hz, rate);
+               }
+               break;
+       case DCLK_DECOM:
+               if (!(702 * MHz % rate)) {
+                       src_clk = DCLK_DECOM_SEL_SPLL;
+                       div = DIV_ROUND_UP(702 * MHz, rate);
+               } else {
+                       src_clk = DCLK_DECOM_SEL_GPLL;
+                       div = DIV_ROUND_UP(priv->gpll_hz, rate);
+               }
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       switch (clk_id) {
+       case CCLK_SRC_SDIO:
+               rk_clrsetreg(&cru->clksel_con[172],
+                            CCLK_SDIO_SRC_SEL_MASK |
+                            CCLK_SDIO_SRC_DIV_MASK,
+                            (src_clk << CCLK_SDIO_SRC_SEL_SHIFT) |
+                            (div - 1) << CCLK_SDIO_SRC_DIV_SHIFT);
+               break;
+       case CCLK_EMMC:
+               rk_clrsetreg(&cru->clksel_con[77],
+                            CCLK_EMMC_SEL_MASK |
+                            CCLK_EMMC_DIV_MASK,
+                            (src_clk << CCLK_EMMC_SEL_SHIFT) |
+                            (div - 1) << CCLK_EMMC_DIV_SHIFT);
+               break;
+       case BCLK_EMMC:
+               rk_clrsetreg(&cru->clksel_con[78],
+                            BCLK_EMMC_DIV_MASK |
+                            BCLK_EMMC_SEL_MASK,
+                            (src_clk << BCLK_EMMC_SEL_SHIFT) |
+                            (div - 1) << BCLK_EMMC_DIV_SHIFT);
+               break;
+       case SCLK_SFC:
+               rk_clrsetreg(&cru->clksel_con[78],
+                            SCLK_SFC_DIV_MASK |
+                            SCLK_SFC_SEL_MASK,
+                            (src_clk << SCLK_SFC_SEL_SHIFT) |
+                            (div - 1) << SCLK_SFC_DIV_SHIFT);
+               break;
+       case DCLK_DECOM:
+               rk_clrsetreg(&cru->clksel_con[62],
+                            DCLK_DECOM_DIV_MASK |
+                            DCLK_DECOM_SEL_MASK,
+                            (src_clk << DCLK_DECOM_SEL_SHIFT) |
+                            (div - 1) << DCLK_DECOM_DIV_SHIFT);
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_mmc_get_clk(priv, clk_id);
+}
+
+#ifndef CONFIG_SPL_BUILD
+static ulong rk3588_aux16m_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 div, con, parent;
+
+       parent = priv->gpll_hz;
+       con = readl(&cru->clksel_con[117]);
+
+       switch (clk_id) {
+       case CLK_AUX16M_0:
+               div = (con & CLK_AUX16MHZ_0_DIV_MASK) >> CLK_AUX16MHZ_0_DIV_SHIFT;
+               return DIV_TO_RATE(parent, div);
+       case CLK_AUX16M_1:
+               div = (con & CLK_AUX16MHZ_1_DIV_MASK) >> CLK_AUX16MHZ_1_DIV_SHIFT;
+               return DIV_TO_RATE(parent, div);
+       default:
+               return -ENOENT;
+       }
+}
+
+static ulong rk3588_aux16m_set_clk(struct rk3588_clk_priv *priv,
+                                  ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 div;
+
+       if (!priv->gpll_hz) {
+               printf("%s gpll=%lu\n", __func__, priv->gpll_hz);
+               return -ENOENT;
+       }
+
+       div = DIV_ROUND_UP(priv->gpll_hz, rate);
+
+       switch (clk_id) {
+       case CLK_AUX16M_0:
+               rk_clrsetreg(&cru->clksel_con[117], CLK_AUX16MHZ_0_DIV_MASK,
+                            (div - 1) << CLK_AUX16MHZ_0_DIV_SHIFT);
+               break;
+       case CLK_AUX16M_1:
+               rk_clrsetreg(&cru->clksel_con[117], CLK_AUX16MHZ_1_DIV_MASK,
+                            (div - 1) << CLK_AUX16MHZ_1_DIV_SHIFT);
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_aux16m_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_aclk_vop_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 div, sel, con, parent;
+
+       switch (clk_id) {
+       case ACLK_VOP_ROOT:
+       case ACLK_VOP:
+               con = readl(&cru->clksel_con[110]);
+               div = (con & ACLK_VOP_ROOT_DIV_MASK) >> ACLK_VOP_ROOT_DIV_SHIFT;
+               sel = (con & ACLK_VOP_ROOT_SEL_MASK) >> ACLK_VOP_ROOT_SEL_SHIFT;
+               if (sel == ACLK_VOP_ROOT_SEL_GPLL)
+                       parent = priv->gpll_hz;
+               else if (sel == ACLK_VOP_ROOT_SEL_CPLL)
+                       parent = priv->cpll_hz;
+               else if (sel == ACLK_VOP_ROOT_SEL_AUPLL)
+                       parent = priv->aupll_hz;
+               else if (sel == ACLK_VOP_ROOT_SEL_NPLL)
+                       parent = priv->npll_hz;
+               else
+                       parent = 702 * MHz;
+               return DIV_TO_RATE(parent, div);
+       case ACLK_VOP_LOW_ROOT:
+               con = readl(&cru->clksel_con[110]);
+               sel = (con & ACLK_VOP_LOW_ROOT_SEL_MASK) >>
+                     ACLK_VOP_LOW_ROOT_SEL_SHIFT;
+               if (sel == ACLK_VOP_LOW_ROOT_SEL_400M)
+                       return 396 * MHz;
+               else if (sel == ACLK_VOP_LOW_ROOT_SEL_200M)
+                       return 200 * MHz;
+               else if (sel == ACLK_VOP_LOW_ROOT_SEL_100M)
+                       return 100 * MHz;
+               else
+                       return OSC_HZ;
+       case HCLK_VOP_ROOT:
+               con = readl(&cru->clksel_con[110]);
+               sel = (con & HCLK_VOP_ROOT_SEL_MASK) >> HCLK_VOP_ROOT_SEL_SHIFT;
+               if (sel == HCLK_VOP_ROOT_SEL_200M)
+                       return 200 * MHz;
+               else if (sel == HCLK_VOP_ROOT_SEL_100M)
+                       return 100 * MHz;
+               else if (sel == HCLK_VOP_ROOT_SEL_50M)
+                       return 50 * MHz;
+               else
+                       return OSC_HZ;
+       default:
+               return -ENOENT;
+       }
+}
+
+static ulong rk3588_aclk_vop_set_clk(struct rk3588_clk_priv *priv,
+                                    ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int src_clk, div;
+
+       switch (clk_id) {
+       case ACLK_VOP_ROOT:
+       case ACLK_VOP:
+               if (rate >= 850 * MHz) {
+                       src_clk = ACLK_VOP_ROOT_SEL_NPLL;
+                       div = 1;
+               } else if (rate >= 750 * MHz) {
+                       src_clk = ACLK_VOP_ROOT_SEL_CPLL;
+                       div = 2;
+               } else if (rate >= 700 * MHz) {
+                       src_clk = ACLK_VOP_ROOT_SEL_SPLL;
+                       div = 1;
+               } else if (!(priv->cpll_hz % rate)) {
+                       src_clk = ACLK_VOP_ROOT_SEL_CPLL;
+                       div = DIV_ROUND_UP(priv->cpll_hz, rate);
+               } else {
+                       src_clk = ACLK_VOP_ROOT_SEL_GPLL;
+                       div = DIV_ROUND_UP(priv->gpll_hz, rate);
+               }
+               rk_clrsetreg(&cru->clksel_con[110],
+                            ACLK_VOP_ROOT_DIV_MASK |
+                            ACLK_VOP_ROOT_SEL_MASK,
+                            (src_clk << ACLK_VOP_ROOT_SEL_SHIFT) |
+                            (div - 1) << ACLK_VOP_ROOT_DIV_SHIFT);
+               break;
+       case ACLK_VOP_LOW_ROOT:
+               if (rate == 400 * MHz || rate == 396 * MHz)
+                       src_clk = ACLK_VOP_LOW_ROOT_SEL_400M;
+               else if (rate == 200 * MHz)
+                       src_clk = ACLK_VOP_LOW_ROOT_SEL_200M;
+               else if (rate == 100 * MHz)
+                       src_clk = ACLK_VOP_LOW_ROOT_SEL_100M;
+               else
+                       src_clk = ACLK_VOP_LOW_ROOT_SEL_24M;
+               rk_clrsetreg(&cru->clksel_con[110],
+                            ACLK_VOP_LOW_ROOT_SEL_MASK,
+                            src_clk << ACLK_VOP_LOW_ROOT_SEL_SHIFT);
+               break;
+       case HCLK_VOP_ROOT:
+               if (rate == 200 * MHz)
+                       src_clk = HCLK_VOP_ROOT_SEL_200M;
+               else if (rate == 100 * MHz)
+                       src_clk = HCLK_VOP_ROOT_SEL_100M;
+               else if (rate == 50 * MHz)
+                       src_clk = HCLK_VOP_ROOT_SEL_50M;
+               else
+                       src_clk = HCLK_VOP_ROOT_SEL_24M;
+               rk_clrsetreg(&cru->clksel_con[110],
+                            HCLK_VOP_ROOT_SEL_MASK,
+                            src_clk << HCLK_VOP_ROOT_SEL_SHIFT);
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_aclk_vop_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_dclk_vop_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 div, sel, con, parent;
+
+       switch (clk_id) {
+       case DCLK_VOP0:
+       case DCLK_VOP0_SRC:
+               con = readl(&cru->clksel_con[111]);
+               div = (con & DCLK0_VOP_SRC_DIV_MASK) >> DCLK0_VOP_SRC_DIV_SHIFT;
+               sel = (con & DCLK0_VOP_SRC_SEL_MASK) >> DCLK0_VOP_SRC_SEL_SHIFT;
+               break;
+       case DCLK_VOP1:
+       case DCLK_VOP1_SRC:
+               con = readl(&cru->clksel_con[111]);
+               div = (con & DCLK1_VOP_SRC_DIV_MASK) >> DCLK1_VOP_SRC_DIV_SHIFT;
+               sel = (con & DCLK1_VOP_SRC_SEL_MASK) >> DCLK1_VOP_SRC_SEL_SHIFT;
+               break;
+       case DCLK_VOP2:
+       case DCLK_VOP2_SRC:
+               con = readl(&cru->clksel_con[112]);
+               div = (con & DCLK2_VOP_SRC_DIV_MASK) >> DCLK2_VOP_SRC_DIV_SHIFT;
+               sel = (con & DCLK2_VOP_SRC_SEL_MASK) >> DCLK2_VOP_SRC_SEL_SHIFT;
+               break;
+       case DCLK_VOP3:
+               con = readl(&cru->clksel_con[113]);
+               div = (con & DCLK3_VOP_SRC_DIV_MASK) >> DCLK3_VOP_SRC_DIV_SHIFT;
+               sel = (con & DCLK3_VOP_SRC_SEL_MASK) >> DCLK3_VOP_SRC_SEL_SHIFT;
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       if (sel == DCLK_VOP_SRC_SEL_AUPLL)
+               parent = priv->aupll_hz;
+       else if (sel == DCLK_VOP_SRC_SEL_V0PLL)
+               parent = rockchip_pll_get_rate(&rk3588_pll_clks[V0PLL],
+                                              priv->cru, V0PLL);
+       else if (sel == DCLK_VOP_SRC_SEL_GPLL)
+               parent = priv->gpll_hz;
+       else if (sel == DCLK_VOP_SRC_SEL_CPLL)
+               parent = priv->cpll_hz;
+       else
+               return -ENOENT;
+
+       return DIV_TO_RATE(parent, div);
+}
+
+#define RK3588_VOP_PLL_LIMIT_FREQ 600000000
+
+static ulong rk3588_dclk_vop_set_clk(struct rk3588_clk_priv *priv,
+                                    ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       ulong pll_rate, now, best_rate = 0;
+       u32 i, conid, con, sel, div, best_div = 0, best_sel = 0;
+       u32 mask, div_shift, sel_shift;
+
+       switch (clk_id) {
+       case DCLK_VOP0:
+       case DCLK_VOP0_SRC:
+               conid = 111;
+               con = readl(&cru->clksel_con[111]);
+               sel = (con & DCLK0_VOP_SRC_SEL_MASK) >> DCLK0_VOP_SRC_SEL_SHIFT;
+               mask = DCLK0_VOP_SRC_SEL_MASK | DCLK0_VOP_SRC_DIV_MASK;
+               div_shift = DCLK0_VOP_SRC_DIV_SHIFT;
+               sel_shift = DCLK0_VOP_SRC_SEL_SHIFT;
+               break;
+       case DCLK_VOP1:
+       case DCLK_VOP1_SRC:
+               conid = 111;
+               con = readl(&cru->clksel_con[111]);
+               sel = (con & DCLK1_VOP_SRC_SEL_MASK) >> DCLK1_VOP_SRC_SEL_SHIFT;
+               mask = DCLK1_VOP_SRC_SEL_MASK | DCLK1_VOP_SRC_DIV_MASK;
+               div_shift = DCLK1_VOP_SRC_DIV_SHIFT;
+               sel_shift = DCLK1_VOP_SRC_SEL_SHIFT;
+               break;
+       case DCLK_VOP2:
+       case DCLK_VOP2_SRC:
+               conid = 112;
+               con = readl(&cru->clksel_con[112]);
+               sel = (con & DCLK2_VOP_SRC_SEL_MASK) >> DCLK2_VOP_SRC_SEL_SHIFT;
+               mask = DCLK2_VOP_SRC_SEL_MASK | DCLK2_VOP_SRC_DIV_MASK;
+               div_shift = DCLK2_VOP_SRC_DIV_SHIFT;
+               sel_shift = DCLK2_VOP_SRC_SEL_SHIFT;
+               break;
+       case DCLK_VOP3:
+               conid = 113;
+               con = readl(&cru->clksel_con[113]);
+               sel = (con & DCLK3_VOP_SRC_SEL_MASK) >> DCLK3_VOP_SRC_SEL_SHIFT;
+               mask = DCLK3_VOP_SRC_SEL_MASK | DCLK3_VOP_SRC_DIV_MASK;
+               div_shift = DCLK3_VOP_SRC_DIV_SHIFT;
+               sel_shift = DCLK3_VOP_SRC_SEL_SHIFT;
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       if (sel == DCLK_VOP_SRC_SEL_V0PLL) {
+               div = DIV_ROUND_UP(RK3588_VOP_PLL_LIMIT_FREQ, rate);
+               rk_clrsetreg(&cru->clksel_con[conid],
+                            mask,
+                            DCLK_VOP_SRC_SEL_V0PLL << sel_shift |
+                            ((div - 1) << div_shift));
+               rockchip_pll_set_rate(&rk3588_pll_clks[V0PLL],
+                                     priv->cru, V0PLL, div * rate);
+       } else {
+               for (i = 0; i <= DCLK_VOP_SRC_SEL_AUPLL; i++) {
+                       switch (i) {
+                       case DCLK_VOP_SRC_SEL_GPLL:
+                               pll_rate = priv->gpll_hz;
+                               break;
+                       case DCLK_VOP_SRC_SEL_CPLL:
+                               pll_rate = priv->cpll_hz;
+                               break;
+                       case DCLK_VOP_SRC_SEL_AUPLL:
+                               pll_rate = priv->aupll_hz;
+                               break;
+                       case DCLK_VOP_SRC_SEL_V0PLL:
+                               pll_rate = 0;
+                               break;
+                       default:
+                               printf("do not support this vop pll sel\n");
+                               return -EINVAL;
+                       }
+
+                       div = DIV_ROUND_UP(pll_rate, rate);
+                       if (div > 255)
+                               continue;
+                       now = pll_rate / div;
+                       if (abs(rate - now) < abs(rate - best_rate)) {
+                               best_rate = now;
+                               best_div = div;
+                               best_sel = i;
+                       }
+                       debug("p_rate=%lu, best_rate=%lu, div=%u, sel=%u\n",
+                             pll_rate, best_rate, best_div, best_sel);
+               }
+
+               if (best_rate) {
+                       rk_clrsetreg(&cru->clksel_con[conid],
+                                    mask,
+                                    best_sel << sel_shift |
+                                    (best_div - 1) << div_shift);
+               } else {
+                       printf("do not support this vop freq %lu\n", rate);
+                       return -EINVAL;
+               }
+       }
+       return rk3588_dclk_vop_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_gmac_get_clk(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 con, div;
+
+       switch (clk_id) {
+       case CLK_GMAC0_PTP_REF:
+               con = readl(&cru->clksel_con[81]);
+               div = (con & CLK_GMAC0_PTP_DIV_MASK) >> CLK_GMAC0_PTP_DIV_SHIFT;
+               return DIV_TO_RATE(priv->cpll_hz, div);
+       case CLK_GMAC1_PTP_REF:
+               con = readl(&cru->clksel_con[81]);
+               div = (con & CLK_GMAC1_PTP_DIV_MASK) >> CLK_GMAC1_PTP_DIV_SHIFT;
+               return DIV_TO_RATE(priv->cpll_hz, div);
+       case CLK_GMAC_125M:
+               con = readl(&cru->clksel_con[83]);
+               div = (con & CLK_GMAC_125M_DIV_MASK) >> CLK_GMAC_125M_DIV_SHIFT;
+               return DIV_TO_RATE(priv->cpll_hz, div);
+       case CLK_GMAC_50M:
+               con = readl(&cru->clksel_con[84]);
+               div = (con & CLK_GMAC_50M_DIV_MASK) >> CLK_GMAC_50M_DIV_SHIFT;
+               return DIV_TO_RATE(priv->cpll_hz, div);
+       default:
+               return -ENOENT;
+       }
+}
+
+static ulong rk3588_gmac_set_clk(struct rk3588_clk_priv *priv,
+                                ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       int div;
+
+       div = DIV_ROUND_UP(priv->cpll_hz, rate);
+
+       switch (clk_id) {
+       case CLK_GMAC0_PTP_REF:
+               rk_clrsetreg(&cru->clksel_con[81],
+                            CLK_GMAC0_PTP_DIV_MASK | CLK_GMAC0_PTP_SEL_MASK,
+                            CLK_GMAC0_PTP_SEL_CPLL << CLK_GMAC0_PTP_SEL_SHIFT |
+                            (div - 1) << CLK_GMAC0_PTP_DIV_SHIFT);
+               break;
+       case CLK_GMAC1_PTP_REF:
+               rk_clrsetreg(&cru->clksel_con[81],
+                            CLK_GMAC1_PTP_DIV_MASK | CLK_GMAC1_PTP_SEL_MASK,
+                            CLK_GMAC1_PTP_SEL_CPLL << CLK_GMAC1_PTP_SEL_SHIFT |
+                            (div - 1) << CLK_GMAC1_PTP_DIV_SHIFT);
+               break;
+
+       case CLK_GMAC_125M:
+               rk_clrsetreg(&cru->clksel_con[83],
+                            CLK_GMAC_125M_DIV_MASK | CLK_GMAC_125M_SEL_MASK,
+                            CLK_GMAC_125M_SEL_CPLL << CLK_GMAC_125M_SEL_SHIFT |
+                            (div - 1) << CLK_GMAC_125M_DIV_SHIFT);
+               break;
+       case CLK_GMAC_50M:
+               rk_clrsetreg(&cru->clksel_con[84],
+                            CLK_GMAC_50M_DIV_MASK | CLK_GMAC_50M_SEL_MASK,
+                            CLK_GMAC_50M_SEL_CPLL << CLK_GMAC_50M_SEL_SHIFT |
+                            (div - 1) << CLK_GMAC_50M_DIV_SHIFT);
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_gmac_get_clk(priv, clk_id);
+}
+
+static ulong rk3588_uart_get_rate(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 reg, con, fracdiv, div, src, p_src, p_rate;
+       unsigned long m, n;
+
+       switch (clk_id) {
+       case SCLK_UART1:
+               reg = 41;
+               break;
+       case SCLK_UART2:
+               reg = 43;
+               break;
+       case SCLK_UART3:
+               reg = 45;
+               break;
+       case SCLK_UART4:
+               reg = 47;
+               break;
+       case SCLK_UART5:
+               reg = 49;
+               break;
+       case SCLK_UART6:
+               reg = 51;
+               break;
+       case SCLK_UART7:
+               reg = 53;
+               break;
+       case SCLK_UART8:
+               reg = 55;
+               break;
+       case SCLK_UART9:
+               reg = 57;
+               break;
+       default:
+               return -ENOENT;
+       }
+       con = readl(&cru->clksel_con[reg + 2]);
+       src = (con & CLK_UART_SEL_MASK) >> CLK_UART_SEL_SHIFT;
+       con = readl(&cru->clksel_con[reg]);
+       div = (con & CLK_UART_SRC_DIV_MASK) >> CLK_UART_SRC_DIV_SHIFT;
+       p_src = (con & CLK_UART_SRC_SEL_MASK) >> CLK_UART_SRC_SEL_SHIFT;
+       if (p_src == CLK_UART_SRC_SEL_GPLL)
+               p_rate = priv->gpll_hz;
+       else
+               p_rate = priv->cpll_hz;
+
+       if (src == CLK_UART_SEL_SRC) {
+               return DIV_TO_RATE(p_rate, div);
+       } else if (src == CLK_UART_SEL_FRAC) {
+               fracdiv = readl(&cru->clksel_con[reg + 1]);
+               n = fracdiv & CLK_UART_FRAC_NUMERATOR_MASK;
+               n >>= CLK_UART_FRAC_NUMERATOR_SHIFT;
+               m = fracdiv & CLK_UART_FRAC_DENOMINATOR_MASK;
+               m >>= CLK_UART_FRAC_DENOMINATOR_SHIFT;
+               return DIV_TO_RATE(p_rate, div) * n / m;
+       } else {
+               return OSC_HZ;
+       }
+}
+
+static ulong rk3588_uart_set_rate(struct rk3588_clk_priv *priv,
+                                 ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 reg, clk_src, uart_src, div;
+       unsigned long m = 0, n = 0, val;
+
+       if (priv->gpll_hz % rate == 0) {
+               clk_src = CLK_UART_SRC_SEL_GPLL;
+               uart_src = CLK_UART_SEL_SRC;
+               div = DIV_ROUND_UP(priv->gpll_hz, rate);
+       } else if (priv->cpll_hz % rate == 0) {
+               clk_src = CLK_UART_SRC_SEL_CPLL;
+               uart_src = CLK_UART_SEL_SRC;
+               div = DIV_ROUND_UP(priv->gpll_hz, rate);
+       } else if (rate == OSC_HZ) {
+               clk_src = CLK_UART_SRC_SEL_GPLL;
+               uart_src = CLK_UART_SEL_XIN24M;
+               div = 2;
+       } else {
+               clk_src = CLK_UART_SRC_SEL_GPLL;
+               uart_src = CLK_UART_SEL_FRAC;
+               div = 2;
+               rational_best_approximation(rate, priv->gpll_hz / div,
+                                           GENMASK(16 - 1, 0),
+                                           GENMASK(16 - 1, 0),
+                                           &m, &n);
+       }
+
+       switch (clk_id) {
+       case SCLK_UART1:
+               reg = 41;
+               break;
+       case SCLK_UART2:
+               reg = 43;
+               break;
+       case SCLK_UART3:
+               reg = 45;
+               break;
+       case SCLK_UART4:
+               reg = 47;
+               break;
+       case SCLK_UART5:
+               reg = 49;
+               break;
+       case SCLK_UART6:
+               reg = 51;
+               break;
+       case SCLK_UART7:
+               reg = 53;
+               break;
+       case SCLK_UART8:
+               reg = 55;
+               break;
+       case SCLK_UART9:
+               reg = 57;
+               break;
+       default:
+               return -ENOENT;
+       }
+       rk_clrsetreg(&cru->clksel_con[reg],
+                    CLK_UART_SRC_SEL_MASK |
+                    CLK_UART_SRC_DIV_MASK,
+                    (clk_src << CLK_UART_SRC_SEL_SHIFT) |
+                    ((div - 1) << CLK_UART_SRC_DIV_SHIFT));
+       rk_clrsetreg(&cru->clksel_con[reg + 2],
+                    CLK_UART_SEL_MASK,
+                    (uart_src << CLK_UART_SEL_SHIFT));
+       if (m && n) {
+               val = m << CLK_UART_FRAC_NUMERATOR_SHIFT | n;
+               writel(val, &cru->clksel_con[reg + 1]);
+       }
+
+       return rk3588_uart_get_rate(priv, clk_id);
+}
+
+static ulong rk3588_pciephy_get_rate(struct rk3588_clk_priv *priv, ulong clk_id)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 con, div, src;
+
+       switch (clk_id) {
+       case CLK_REF_PIPE_PHY0:
+               con = readl(&cru->clksel_con[177]);
+               src = (con & CLK_PCIE_PHY0_REF_SEL_MASK) >> CLK_PCIE_PHY0_REF_SEL_SHIFT;
+               con = readl(&cru->clksel_con[176]);
+               div = (con & CLK_PCIE_PHY0_PLL_DIV_MASK) >> CLK_PCIE_PHY0_PLL_DIV_SHIFT;
+               break;
+       case CLK_REF_PIPE_PHY1:
+               con = readl(&cru->clksel_con[177]);
+               src = (con & CLK_PCIE_PHY1_REF_SEL_MASK) >> CLK_PCIE_PHY1_REF_SEL_SHIFT;
+               con = readl(&cru->clksel_con[176]);
+               div = (con & CLK_PCIE_PHY1_PLL_DIV_MASK) >> CLK_PCIE_PHY1_PLL_DIV_SHIFT;
+               break;
+       case CLK_REF_PIPE_PHY2:
+               con = readl(&cru->clksel_con[177]);
+               src = (con & CLK_PCIE_PHY2_REF_SEL_MASK) >> CLK_PCIE_PHY2_REF_SEL_SHIFT;
+               div = (con & CLK_PCIE_PHY2_PLL_DIV_MASK) >> CLK_PCIE_PHY2_PLL_DIV_SHIFT;
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       if (src == CLK_PCIE_PHY_REF_SEL_PPLL)
+               return DIV_TO_RATE(priv->ppll_hz, div);
+       else
+               return OSC_HZ;
+}
+
+static ulong rk3588_pciephy_set_rate(struct rk3588_clk_priv *priv,
+                                    ulong clk_id, ulong rate)
+{
+       struct rk3588_cru *cru = priv->cru;
+       u32 clk_src, div;
+
+       if (rate == OSC_HZ) {
+               clk_src = CLK_PCIE_PHY_REF_SEL_24M;
+               div = 1;
+       } else {
+               clk_src = CLK_PCIE_PHY_REF_SEL_PPLL;
+               div = DIV_ROUND_UP(priv->ppll_hz, rate);
+       }
+
+       switch (clk_id) {
+       case CLK_REF_PIPE_PHY0:
+               rk_clrsetreg(&cru->clksel_con[177], CLK_PCIE_PHY0_REF_SEL_MASK,
+                            (clk_src << CLK_PCIE_PHY0_REF_SEL_SHIFT));
+               rk_clrsetreg(&cru->clksel_con[176], CLK_PCIE_PHY0_PLL_DIV_MASK,
+                            ((div - 1) << CLK_PCIE_PHY0_PLL_DIV_SHIFT));
+               break;
+       case CLK_REF_PIPE_PHY1:
+               rk_clrsetreg(&cru->clksel_con[177], CLK_PCIE_PHY1_REF_SEL_MASK,
+                            (clk_src << CLK_PCIE_PHY1_REF_SEL_SHIFT));
+               rk_clrsetreg(&cru->clksel_con[176], CLK_PCIE_PHY1_PLL_DIV_MASK,
+                            ((div - 1) << CLK_PCIE_PHY1_PLL_DIV_SHIFT));
+               break;
+       case CLK_REF_PIPE_PHY2:
+               rk_clrsetreg(&cru->clksel_con[177], CLK_PCIE_PHY2_REF_SEL_MASK |
+                            CLK_PCIE_PHY2_PLL_DIV_MASK,
+                            (clk_src << CLK_PCIE_PHY2_REF_SEL_SHIFT) |
+                            ((div - 1) << CLK_PCIE_PHY2_PLL_DIV_SHIFT));
+               break;
+       default:
+               return -ENOENT;
+       }
+
+       return rk3588_pciephy_get_rate(priv, clk_id);
+}
+#endif
+
+static ulong rk3588_clk_get_rate(struct clk *clk)
+{
+       struct rk3588_clk_priv *priv = dev_get_priv(clk->dev);
+       ulong rate = 0;
+
+       if (!priv->gpll_hz) {
+               printf("%s gpll=%lu\n", __func__, priv->gpll_hz);
+               return -ENOENT;
+       }
+
+       if (!priv->ppll_hz) {
+               priv->ppll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[PPLL],
+                                                     priv->cru, PPLL);
+       }
+
+       switch (clk->id) {
+       case PLL_LPLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[LPLL], priv->cru,
+                                            LPLL);
+               break;
+       case PLL_B0PLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[B0PLL], priv->cru,
+                                            B0PLL);
+               break;
+       case PLL_B1PLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[B1PLL], priv->cru,
+                                            B1PLL);
+               break;
+       case PLL_GPLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[GPLL], priv->cru,
+                                            GPLL);
+               break;
+       case PLL_CPLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[CPLL], priv->cru,
+                                            CPLL);
+               break;
+       case PLL_NPLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[NPLL], priv->cru,
+                                            NPLL);
+               break;
+       case PLL_V0PLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[V0PLL], priv->cru,
+                                            V0PLL);
+               break;
+       case PLL_AUPLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[AUPLL], priv->cru,
+                                            AUPLL);
+               break;
+       case PLL_PPLL:
+               rate = rockchip_pll_get_rate(&rk3588_pll_clks[PPLL], priv->cru,
+                                            PPLL);
+               break;
+       case ACLK_CENTER_ROOT:
+       case PCLK_CENTER_ROOT:
+       case HCLK_CENTER_ROOT:
+       case ACLK_CENTER_LOW_ROOT:
+               rate = rk3588_center_get_clk(priv, clk->id);
+               break;
+       case ACLK_TOP_ROOT:
+       case PCLK_TOP_ROOT:
+       case ACLK_LOW_TOP_ROOT:
+               rate = rk3588_top_get_clk(priv, clk->id);
+               break;
+       case CLK_I2C0:
+       case CLK_I2C1:
+       case CLK_I2C2:
+       case CLK_I2C3:
+       case CLK_I2C4:
+       case CLK_I2C5:
+       case CLK_I2C6:
+       case CLK_I2C7:
+       case CLK_I2C8:
+               rate = rk3588_i2c_get_clk(priv, clk->id);
+               break;
+       case CLK_SPI0:
+       case CLK_SPI1:
+       case CLK_SPI2:
+       case CLK_SPI3:
+       case CLK_SPI4:
+               rate = rk3588_spi_get_clk(priv, clk->id);
+               break;
+       case CLK_PWM1:
+       case CLK_PWM2:
+       case CLK_PWM3:
+       case CLK_PMU1PWM:
+               rate = rk3588_pwm_get_clk(priv, clk->id);
+               break;
+       case CLK_SARADC:
+       case CLK_TSADC:
+               rate = rk3588_adc_get_clk(priv, clk->id);
+               break;
+       case CCLK_SRC_SDIO:
+       case CCLK_EMMC:
+       case BCLK_EMMC:
+       case SCLK_SFC:
+       case DCLK_DECOM:
+               rate = rk3588_mmc_get_clk(priv, clk->id);
+               break;
+       case TCLK_WDT0:
+               rate = OSC_HZ;
+               break;
+#ifndef CONFIG_SPL_BUILD
+       case CLK_AUX16M_0:
+       case CLK_AUX16M_1:
+               rk3588_aux16m_get_clk(priv, clk->id);
+               break;
+       case ACLK_VOP_ROOT:
+       case ACLK_VOP:
+       case ACLK_VOP_LOW_ROOT:
+       case HCLK_VOP_ROOT:
+               rate = rk3588_aclk_vop_get_clk(priv, clk->id);
+               break;
+       case DCLK_VOP0:
+       case DCLK_VOP0_SRC:
+       case DCLK_VOP1:
+       case DCLK_VOP1_SRC:
+       case DCLK_VOP2:
+       case DCLK_VOP2_SRC:
+       case DCLK_VOP3:
+               rate = rk3588_dclk_vop_get_clk(priv, clk->id);
+               break;
+       case CLK_GMAC0_PTP_REF:
+       case CLK_GMAC1_PTP_REF:
+       case CLK_GMAC_125M:
+       case CLK_GMAC_50M:
+               rate = rk3588_gmac_get_clk(priv, clk->id);
+               break;
+       case SCLK_UART1:
+       case SCLK_UART2:
+       case SCLK_UART3:
+       case SCLK_UART4:
+       case SCLK_UART5:
+       case SCLK_UART6:
+       case SCLK_UART7:
+       case SCLK_UART8:
+       case SCLK_UART9:
+               rate = rk3588_uart_get_rate(priv, clk->id);
+               break;
+       case CLK_REF_PIPE_PHY0:
+       case CLK_REF_PIPE_PHY1:
+       case CLK_REF_PIPE_PHY2:
+               rate = rk3588_pciephy_get_rate(priv, clk->id);
+               break;
+#endif
+       default:
+               return -ENOENT;
+       }
+
+       return rate;
+};
+
+static ulong rk3588_clk_set_rate(struct clk *clk, ulong rate)
+{
+       struct rk3588_clk_priv *priv = dev_get_priv(clk->dev);
+       ulong ret = 0;
+
+       if (!priv->gpll_hz) {
+               printf("%s gpll=%lu\n", __func__, priv->gpll_hz);
+               return -ENOENT;
+       }
+
+       if (!priv->ppll_hz) {
+               priv->ppll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[PPLL],
+                                                     priv->cru, PPLL);
+       }
+
+       switch (clk->id) {
+       case PLL_CPLL:
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[CPLL], priv->cru,
+                                           CPLL, rate);
+               priv->cpll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[CPLL],
+                                                     priv->cru, CPLL);
+               break;
+       case PLL_GPLL:
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[GPLL], priv->cru,
+                                           GPLL, rate);
+               priv->gpll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[GPLL],
+                                                     priv->cru, GPLL);
+               break;
+       case PLL_NPLL:
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[NPLL], priv->cru,
+                                           NPLL, rate);
+               break;
+       case PLL_V0PLL:
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[V0PLL], priv->cru,
+                                           V0PLL, rate);
+               priv->v0pll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[V0PLL],
+                                                      priv->cru, V0PLL);
+               break;
+       case PLL_AUPLL:
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[AUPLL], priv->cru,
+                                           AUPLL, rate);
+               priv->aupll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[AUPLL],
+                                                      priv->cru, AUPLL);
+               break;
+       case PLL_PPLL:
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[PPLL], priv->cru,
+                                           PPLL, rate);
+               priv->ppll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[PPLL],
+                                                     priv->cru, PPLL);
+               break;
+       case ACLK_CENTER_ROOT:
+       case PCLK_CENTER_ROOT:
+       case HCLK_CENTER_ROOT:
+       case ACLK_CENTER_LOW_ROOT:
+               ret = rk3588_center_set_clk(priv, clk->id, rate);
+               break;
+       case ACLK_TOP_ROOT:
+       case PCLK_TOP_ROOT:
+       case ACLK_LOW_TOP_ROOT:
+               ret = rk3588_top_set_clk(priv, clk->id, rate);
+               break;
+       case CLK_I2C0:
+       case CLK_I2C1:
+       case CLK_I2C2:
+       case CLK_I2C3:
+       case CLK_I2C4:
+       case CLK_I2C5:
+       case CLK_I2C6:
+       case CLK_I2C7:
+       case CLK_I2C8:
+               ret = rk3588_i2c_set_clk(priv, clk->id, rate);
+               break;
+       case CLK_SPI0:
+       case CLK_SPI1:
+       case CLK_SPI2:
+       case CLK_SPI3:
+       case CLK_SPI4:
+               ret = rk3588_spi_set_clk(priv, clk->id, rate);
+               break;
+       case CLK_PWM1:
+       case CLK_PWM2:
+       case CLK_PWM3:
+       case CLK_PMU1PWM:
+               ret = rk3588_pwm_set_clk(priv, clk->id, rate);
+               break;
+       case CLK_SARADC:
+       case CLK_TSADC:
+               ret = rk3588_adc_set_clk(priv, clk->id, rate);
+               break;
+       case CCLK_SRC_SDIO:
+       case CCLK_EMMC:
+       case BCLK_EMMC:
+       case SCLK_SFC:
+       case DCLK_DECOM:
+               ret = rk3588_mmc_set_clk(priv, clk->id, rate);
+               break;
+       case TCLK_WDT0:
+               ret = OSC_HZ;
+               break;
+#ifndef CONFIG_SPL_BUILD
+       case CLK_AUX16M_0:
+       case CLK_AUX16M_1:
+               rk3588_aux16m_set_clk(priv, clk->id, rate);
+               break;
+       case ACLK_VOP_ROOT:
+       case ACLK_VOP:
+       case ACLK_VOP_LOW_ROOT:
+       case HCLK_VOP_ROOT:
+               ret = rk3588_aclk_vop_set_clk(priv, clk->id, rate);
+               break;
+       case DCLK_VOP0:
+       case DCLK_VOP0_SRC:
+       case DCLK_VOP1:
+       case DCLK_VOP1_SRC:
+       case DCLK_VOP2:
+       case DCLK_VOP2_SRC:
+       case DCLK_VOP3:
+               ret = rk3588_dclk_vop_set_clk(priv, clk->id, rate);
+               break;
+       case CLK_GMAC0_PTP_REF:
+       case CLK_GMAC1_PTP_REF:
+       case CLK_GMAC_125M:
+       case CLK_GMAC_50M:
+               ret = rk3588_gmac_set_clk(priv, clk->id, rate);
+               break;
+       case SCLK_UART1:
+       case SCLK_UART2:
+       case SCLK_UART3:
+       case SCLK_UART4:
+       case SCLK_UART5:
+       case SCLK_UART6:
+       case SCLK_UART7:
+       case SCLK_UART8:
+       case SCLK_UART9:
+               ret = rk3588_uart_set_rate(priv, clk->id, rate);
+               break;
+       case CLK_REF_PIPE_PHY0:
+       case CLK_REF_PIPE_PHY1:
+       case CLK_REF_PIPE_PHY2:
+               ret = rk3588_pciephy_set_rate(priv, clk->id, rate);
+               break;
+#endif
+       default:
+               return -ENOENT;
+       }
+
+       return ret;
+};
+
+#define ROCKCHIP_MMC_DELAY_SEL         BIT(10)
+#define ROCKCHIP_MMC_DEGREE_MASK       0x3
+#define ROCKCHIP_MMC_DELAYNUM_OFFSET   2
+#define ROCKCHIP_MMC_DELAYNUM_MASK     (0xff << ROCKCHIP_MMC_DELAYNUM_OFFSET)
+
+#define PSECS_PER_SEC 1000000000000LL
+/*
+ * Each fine delay is between 44ps-77ps. Assume each fine delay is 60ps to
+ * simplify calculations. So 45degs could be anywhere between 33deg and 57.8deg.
+ */
+#define ROCKCHIP_MMC_DELAY_ELEMENT_PSEC 60
+
+#if (IS_ENABLED(OF_CONTROL)) || (!IS_ENABLED(OF_PLATDATA))
+static int __maybe_unused rk3588_dclk_vop_set_parent(struct clk *clk,
+                                                    struct clk *parent)
+{
+       struct rk3588_clk_priv *priv = dev_get_priv(clk->dev);
+       struct rk3588_cru *cru = priv->cru;
+       u32 sel;
+       const char *clock_dev_name = parent->dev->name;
+
+       if (parent->id == PLL_V0PLL)
+               sel = 2;
+       else if (parent->id == PLL_GPLL)
+               sel = 0;
+       else if (parent->id == PLL_CPLL)
+               sel = 1;
+       else
+               sel = 3;
+
+       switch (clk->id) {
+       case DCLK_VOP0_SRC:
+               rk_clrsetreg(&cru->clksel_con[111], DCLK0_VOP_SRC_SEL_MASK,
+                            sel << DCLK0_VOP_SRC_SEL_SHIFT);
+               break;
+       case DCLK_VOP1_SRC:
+               rk_clrsetreg(&cru->clksel_con[111], DCLK1_VOP_SRC_SEL_MASK,
+                            sel << DCLK1_VOP_SRC_SEL_SHIFT);
+               break;
+       case DCLK_VOP2_SRC:
+               rk_clrsetreg(&cru->clksel_con[112], DCLK2_VOP_SRC_SEL_MASK,
+                            sel << DCLK2_VOP_SRC_SEL_SHIFT);
+               break;
+       case DCLK_VOP3:
+               rk_clrsetreg(&cru->clksel_con[113], DCLK3_VOP_SRC_SEL_MASK,
+                            sel << DCLK3_VOP_SRC_SEL_SHIFT);
+               break;
+       case DCLK_VOP0:
+               if (!strcmp(clock_dev_name, "hdmiphypll_clk0"))
+                       sel = 1;
+               else if (!strcmp(clock_dev_name, "hdmiphypll_clk1"))
+                       sel = 2;
+               else
+                       sel = 0;
+               rk_clrsetreg(&cru->clksel_con[112], DCLK0_VOP_SEL_MASK,
+                            sel << DCLK0_VOP_SEL_SHIFT);
+               break;
+       case DCLK_VOP1:
+               if (!strcmp(clock_dev_name, "hdmiphypll_clk0"))
+                       sel = 1;
+               else if (!strcmp(clock_dev_name, "hdmiphypll_clk1"))
+                       sel = 2;
+               else
+                       sel = 0;
+               rk_clrsetreg(&cru->clksel_con[112], DCLK1_VOP_SEL_MASK,
+                            sel << DCLK1_VOP_SEL_SHIFT);
+               break;
+       case DCLK_VOP2:
+               if (!strcmp(clock_dev_name, "hdmiphypll_clk0"))
+                       sel = 1;
+               else if (!strcmp(clock_dev_name, "hdmiphypll_clk1"))
+                       sel = 2;
+               else
+                       sel = 0;
+               rk_clrsetreg(&cru->clksel_con[112], DCLK2_VOP_SEL_MASK,
+                            sel << DCLK2_VOP_SEL_SHIFT);
+               break;
+       default:
+               return -EINVAL;
+       }
+       return 0;
+}
+
+static int rk3588_clk_set_parent(struct clk *clk, struct clk *parent)
+{
+       switch (clk->id) {
+       case DCLK_VOP0_SRC:
+       case DCLK_VOP1_SRC:
+       case DCLK_VOP2_SRC:
+       case DCLK_VOP0:
+       case DCLK_VOP1:
+       case DCLK_VOP2:
+       case DCLK_VOP3:
+               return rk3588_dclk_vop_set_parent(clk, parent);
+       default:
+               return -ENOENT;
+       }
+
+       return 0;
+}
+#endif
+
+static struct clk_ops rk3588_clk_ops = {
+       .get_rate = rk3588_clk_get_rate,
+       .set_rate = rk3588_clk_set_rate,
+#if (IS_ENABLED(OF_CONTROL)) || (!IS_ENABLED(OF_PLATDATA))
+       .set_parent = rk3588_clk_set_parent,
+#endif
+};
+
+static void rk3588_clk_init(struct rk3588_clk_priv *priv)
+{
+       int ret, div;
+
+       div = DIV_ROUND_UP(GPLL_HZ, 300 * MHz);
+       rk_clrsetreg(&priv->cru->clksel_con[38],
+                    ACLK_BUS_ROOT_SEL_MASK |
+                    ACLK_BUS_ROOT_DIV_MASK,
+                    div << ACLK_BUS_ROOT_DIV_SHIFT);
+
+       if (priv->cpll_hz != CPLL_HZ) {
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[CPLL], priv->cru,
+                                           CPLL, CPLL_HZ);
+               if (!ret)
+                       priv->cpll_hz = CPLL_HZ;
+       }
+       if (priv->gpll_hz != GPLL_HZ) {
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[GPLL], priv->cru,
+                                           GPLL, GPLL_HZ);
+               if (!ret)
+                       priv->gpll_hz = GPLL_HZ;
+       }
+
+#ifdef CONFIG_PCI
+       if (priv->ppll_hz != PPLL_HZ) {
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[PPLL], priv->cru,
+                                           PPLL, PPLL_HZ);
+               priv->ppll_hz = rockchip_pll_get_rate(&rk3588_pll_clks[PPLL],
+                                                     priv->cru, PPLL);
+       }
+#endif
+       rk_clrsetreg(&priv->cru->clksel_con[9],
+                    ACLK_TOP_S400_SEL_MASK |
+                    ACLK_TOP_S200_SEL_MASK,
+                    (ACLK_TOP_S400_SEL_400M << ACLK_TOP_S400_SEL_SHIFT) |
+                    (ACLK_TOP_S200_SEL_200M << ACLK_TOP_S200_SEL_SHIFT));
+}
+
+static int rk3588_clk_probe(struct udevice *dev)
+{
+       struct rk3588_clk_priv *priv = dev_get_priv(dev);
+       int ret;
+
+       priv->sync_kernel = false;
+
+#ifdef CONFIG_SPL_BUILD
+       rockchip_pll_set_rate(&rk3588_pll_clks[B0PLL], priv->cru,
+                             B0PLL, LPLL_HZ);
+       rockchip_pll_set_rate(&rk3588_pll_clks[B1PLL], priv->cru,
+                             B1PLL, LPLL_HZ);
+       if (!priv->armclk_enter_hz) {
+               ret = rockchip_pll_set_rate(&rk3588_pll_clks[LPLL], priv->cru,
+                                           LPLL, LPLL_HZ);
+               priv->armclk_enter_hz =
+                       rockchip_pll_get_rate(&rk3588_pll_clks[LPLL],
+                                             priv->cru, LPLL);
+               priv->armclk_init_hz = priv->armclk_enter_hz;
+       }
+#endif
+
+       priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
+       if (IS_ERR(priv->grf))
+               return PTR_ERR(priv->grf);
+
+       rk3588_clk_init(priv);
+
+       /* Process 'assigned-{clocks/clock-parents/clock-rates}' properties */
+       ret = clk_set_defaults(dev, 1);
+       if (ret)
+               debug("%s clk_set_defaults failed %d\n", __func__, ret);
+       else
+               priv->sync_kernel = true;
+
+       return 0;
+}
+
+static int rk3588_clk_ofdata_to_platdata(struct udevice *dev)
+{
+       struct rk3588_clk_priv *priv = dev_get_priv(dev);
+
+       priv->cru = dev_read_addr_ptr(dev);
+
+       return 0;
+}
+
+static int rk3588_clk_bind(struct udevice *dev)
+{
+       int ret;
+       struct udevice *sys_child;
+       struct sysreset_reg *priv;
+
+       /* The reset driver does not have a device node, so bind it here */
+       ret = device_bind_driver(dev, "rockchip_sysreset", "sysreset",
+                                &sys_child);
+       if (ret) {
+               debug("Warning: No sysreset driver: ret=%d\n", ret);
+       } else {
+               priv = malloc(sizeof(struct sysreset_reg));
+               priv->glb_srst_fst_value = offsetof(struct rk3588_cru,
+                                                   glb_srst_fst);
+               priv->glb_srst_snd_value = offsetof(struct rk3588_cru,
+                                                   glb_srsr_snd);
+               dev_set_priv(sys_child, priv);
+       }
+
+#if CONFIG_IS_ENABLED(RESET_ROCKCHIP)
+       ret = offsetof(struct rk3588_cru, softrst_con[0]);
+       ret = rockchip_reset_bind(dev, ret, 49158);
+       if (ret)
+               debug("Warning: software reset driver bind faile\n");
+#endif
+
+       return 0;
+}
+
+static const struct udevice_id rk3588_clk_ids[] = {
+       { .compatible = "rockchip,rk3588-cru" },
+       { }
+};
+
+U_BOOT_DRIVER(rockchip_rk3588_cru) = {
+       .name           = "rockchip_rk3588_cru",
+       .id             = UCLASS_CLK,
+       .of_match       = rk3588_clk_ids,
+       .priv_auto      = sizeof(struct rk3588_clk_priv),
+       .of_to_plat     = rk3588_clk_ofdata_to_platdata,
+       .ops            = &rk3588_clk_ops,
+       .bind           = rk3588_clk_bind,
+       .probe          = rk3588_clk_probe,
+};