GCC4.6: Use debug() instead of debugX() in s3c24xx_nand.c

The debugX() macro was always used with debug level 1. There is no point to use
it here instead of debug().

Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Mike Frysinger <vapier@gentoo.org>

diff --git a/drivers/mtd/nand/s3c2410_nand.c b/drivers/mtd/nand/s3c2410_nand.c
index 27351fb7a05f347c0312e324ca5981ab4e89cb64..e1a459b009a283d0b287d2131b77753f88725831 100644 (file)
--- a/drivers/mtd/nand/s3c2410_nand.c
+++ b/drivers/mtd/nand/s3c2410_nand.c
@@ -56,7 +56,7 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
        struct nand_chip *chip = mtd->priv;
        struct s3c2410_nand *nand = s3c2410_get_base_nand();
 
-       debugX(1, "hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
+       debug("hwcontrol(): 0x%02x 0x%02x\n", cmd, ctrl);
 
        if (ctrl & NAND_CTRL_CHANGE) {
                ulong IO_ADDR_W = (ulong)nand;
@@ -83,7 +83,7 @@ static void s3c2410_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
 static int s3c2410_dev_ready(struct mtd_info *mtd)
 {
        struct s3c2410_nand *nand = s3c2410_get_base_nand();
-       debugX(1, "dev_ready\n");
+       debug("dev_ready\n");
        return readl(&nand->nfstat) & 0x01;
 }
 
@@ -91,7 +91,7 @@ static int s3c2410_dev_ready(struct mtd_info *mtd)
 void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 {
        struct s3c2410_nand *nand = s3c2410_get_base_nand();
-       debugX(1, "s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
+       debug("s3c2410_nand_enable_hwecc(%p, %d)\n", mtd, mode);
        writel(readl(&nand->nfconf) | S3C2410_NFCONF_INITECC, &nand->nfconf);
 }
 
@@ -102,7 +102,7 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
        ecc_code[0] = readb(&nand->nfecc);
        ecc_code[1] = readb(&nand->nfecc + 1);
        ecc_code[2] = readb(&nand->nfecc + 2);
-       debugX(1, "s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
+       debug("s3c2410_nand_calculate_hwecc(%p,): 0x%02x 0x%02x 0x%02x\n",
               mtd , ecc_code[0], ecc_code[1], ecc_code[2]);
 
        return 0;
@@ -128,7 +128,7 @@ int board_nand_init(struct nand_chip *nand)
        struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
        struct s3c2410_nand *nand_reg = s3c2410_get_base_nand();
 
-       debugX(1, "board_nand_init()\n");
+       debug("board_nand_init()\n");
 
        writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
 
@@ -183,7 +183,7 @@ int board_nand_init(struct nand_chip *nand)
        nand->options = 0;
 #endif
 
-       debugX(1, "end of nand_init\n");
+       debug("end of nand_init\n");
 
        return 0;
 }