--- /dev/null
+#
+# Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := ima3-mx53.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+/*
+ * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
+ *
+ * (C) Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx5x_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/errno.h>
+#include <netdev.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+
+/* NOR flash configuration */
+#define IMA3_MX53_CS0GCR1 (CSEN | DSZ(2))
+#define IMA3_MX53_CS0GCR2 0
+#define IMA3_MX53_CS0RCR1 (RCSN(2) | OEN(1) | RWSC(15))
+#define IMA3_MX53_CS0RCR2 0
+#define IMA3_MX53_CS0WCR1 (WBED1 | WCSN(2) | WEN(1) | WWSC(15))
+#define IMA3_MX53_CS0WCR2 0
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void weim_nor_settings(void)
+{
+ struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
+
+ writel(IMA3_MX53_CS0GCR1, &weim_regs->cs0gcr1);
+ writel(IMA3_MX53_CS0GCR2, &weim_regs->cs0gcr2);
+ writel(IMA3_MX53_CS0RCR1, &weim_regs->cs0rcr1);
+ writel(IMA3_MX53_CS0RCR2, &weim_regs->cs0rcr2);
+ writel(IMA3_MX53_CS0WCR1, &weim_regs->cs0wcr1);
+ writel(IMA3_MX53_CS0WCR2, &weim_regs->cs0wcr2);
+ writel(0x0, &weim_regs->wcr);
+
+ set_chipselect_size(CS0_128);
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+ /* UART4 RXD */
+ mxc_request_iomux(MX53_PIN_CSI0_D13, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D13,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ mxc_iomux_set_input(MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
+
+ /* UART4 TXD */
+ mxc_request_iomux(MX53_PIN_CSI0_D12, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D12,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
+}
+
+static void setup_iomux_fec(void)
+{
+ /*FEC_MDIO*/
+ mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU |
+ PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
+
+ /*FEC_MDC*/
+ mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
+
+ /* FEC RXD3 */
+ mxc_request_iomux(MX53_PIN_KEY_COL0, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL0, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RXD2 */
+ mxc_request_iomux(MX53_PIN_KEY_COL2, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL2, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RXD1 */
+ mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RXD0 */
+ mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC TXD3 */
+ mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_GPIO_19, PAD_CTL_DRV_HIGH);
+
+ /* FEC TXD2 */
+ mxc_request_iomux(MX53_PIN_KEY_ROW2, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_ROW2, PAD_CTL_DRV_HIGH);
+
+ /* FEC TXD1 */
+ mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
+
+ /* FEC TXD0 */
+ mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
+
+ /* FEC TX_EN */
+ mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
+
+ /* FEC TX_CLK */
+ mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RX_ER */
+ mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RX_DV */
+ mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC CRS */
+ mxc_request_iomux(MX53_PIN_KEY_COL3, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL3, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC COL */
+ mxc_request_iomux(MX53_PIN_KEY_ROW1, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_ROW1, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+ mxc_iomux_set_input(MX53_FEC_FEC_COL_SELECT_INPUT, 0x0);
+
+ /* FEC RX_CLK */
+ mxc_request_iomux(MX53_PIN_KEY_COL1, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL1, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+ mxc_iomux_set_input(MX53_FEC_FEC_RX_CLK_SELECT_INPUT, 0x0);
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR, 1 };
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ int ret;
+
+ ret = !gpio_get_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX53_PIN_GPIO_1,
+ PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
+ PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_PKE_ENABLE);
+ gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
+
+ mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_47K_PU | PAD_CTL_DRV_HIGH);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+static void setup_iomux_spi(void)
+{
+ /* SCLK */
+ mxc_request_iomux(MX53_PIN_CSI0_D8, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_input(MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, 0x1);
+ /* MOSI */
+ mxc_request_iomux(MX53_PIN_CSI0_D9, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, 0x1);
+ /* MISO */
+ mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, 0x1);
+ /* SSEL 0 */
+ mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D11), 1);
+}
+
+int board_early_init_f(void)
+{
+ /* configure I/O pads */
+ setup_iomux_uart();
+ setup_iomux_fec();
+
+ weim_nor_settings();
+
+ /* configure spi */
+ setup_iomux_spi();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ mxc_set_sata_internal_clock();
+
+ return 0;
+}
+
+#if defined(CONFIG_RESET_PHY_R)
+#include <miiphy.h>
+
+void reset_phy(void)
+{
+ unsigned short reg;
+
+ /* reset the phy */
+ miiphy_reset("FEC", CONFIG_PHY_ADDR);
+
+ /* set hard link to 100Mbit, full-duplex */
+ miiphy_read("FEC", CONFIG_PHY_ADDR, MII_BMCR, ®);
+ reg &= ~BMCR_ANENABLE;
+ reg |= (BMCR_SPEED100 | BMCR_FULLDPLX);
+ miiphy_write("FEC", CONFIG_PHY_ADDR, MII_BMCR, reg);
+
+ miiphy_read("FEC", CONFIG_PHY_ADDR, 0x16, ®);
+ reg |= (1 << 5);
+ miiphy_write("FEC", CONFIG_PHY_ADDR, 0x16, reg);
+}
+#endif
+
+int checkboard(void)
+{
+ puts("Board: IMA3_MX53\n");
+
+ return 0;
+}
--- /dev/null
+#
+# (C) Copyright 2012
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# image version
+
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM nor
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# IOMUX for RAM only
+DATA 4 0x53fa8554 0x300020
+DATA 4 0x53fa8560 0x300020
+DATA 4 0x53fa8594 0x300020
+DATA 4 0x53fa8584 0x300020
+DATA 4 0x53fa8558 0x300040
+DATA 4 0x53fa8568 0x300040
+DATA 4 0x53fa8590 0x300040
+DATA 4 0x53fa857c 0x300040
+DATA 4 0x53fa8564 0x300040
+DATA 4 0x53fa8580 0x300040
+DATA 4 0x53fa8570 0x300220
+DATA 4 0x53fa8578 0x300220
+DATA 4 0x53fa872c 0x300000
+DATA 4 0x53fa8728 0x300000
+DATA 4 0x53fa871c 0x300000
+DATA 4 0x53fa8718 0x300000
+DATA 4 0x53fa8574 0x300020
+DATA 4 0x53fa8588 0x300020
+DATA 4 0x53fa855c 0x0
+DATA 4 0x53fa858c 0x0
+DATA 4 0x53fa856c 0x300040
+DATA 4 0x53fa86f0 0x300000
+DATA 4 0x53fa8720 0x300000
+DATA 4 0x53fa86fc 0x0
+DATA 4 0x53fa86f4 0x0
+DATA 4 0x53fa8714 0x0
+DATA 4 0x53fa8724 0x4000000
+#
+# DDR RAM
+DATA 4 0x63fd9088 0x40404040
+DATA 4 0x63fd9090 0x40404040
+DATA 4 0x63fd907C 0x01420143
+DATA 4 0x63fd9080 0x01450146
+DATA 4 0x63fd9018 0x00111740
+DATA 4 0x63fd9000 0x84190000
+# esdcfgX
+DATA 4 0x63fd900C 0x9f5152e3
+DATA 4 0x63fd9010 0xb68e8a63
+DATA 4 0x63fd9014 0x01ff00db
+# Read/Write command delay
+DATA 4 0x63fd902c 0x000026d2
+# Out of reset delays
+DATA 4 0x63fd9030 0x00ff0e21
+# ESDCTL ODT timing control
+DATA 4 0x63fd9008 0x12273030
+# ESDCTL power down control
+DATA 4 0x63fd9004 0x0002002d
+# Set registers in DDR memory chips
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x052080b0
+DATA 4 0x63fd901c 0x04008040
+# ESDCTL refresh control
+DATA 4 0x63fd9020 0x00005800
+# PHY ZQ HW control
+DATA 4 0x63fd9040 0x05380003
+# PHY ODT control
+DATA 4 0x63fd9058 0x00022222
+# start DDR3
+DATA 4 0x63fd901c 0x00000000
mx53evk arm armv7 mx53evk freescale mx5 mx53evk:IMX_CONFIG=board/freescale/mx53evk/imximage.cfg
mx53loco arm armv7 mx53loco freescale mx5 mx53loco:IMX_CONFIG=board/freescale/mx53loco/imximage.cfg
mx53smd arm armv7 mx53smd freescale mx5 mx53smd:IMX_CONFIG=board/freescale/mx53smd/imximage.cfg
+ima3-mx53 arm armv7 ima3-mx53 esg mx5 ima3-mx53:IMX_CONFIG=board/esg/ima3-mx53/imximage.cfg
vision2 arm armv7 vision2 ttcontrol mx5 vision2:IMX_CONFIG=board/ttcontrol/vision2/imximage_hynix.cfg
mx6qarm2 arm armv7 mx6qarm2 freescale mx6 mx6qarm2:IMX_CONFIG=board/freescale/mx6qarm2/imximage.cfg
mx6qsabrelite arm armv7 mx6qsabrelite freescale mx6 mx6qsabrelite:IMX_CONFIG=board/freescale/mx6qsabrelite/imximage.cfg
--- /dev/null
+/*
+ * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
+ *
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * Configuration settings for the MX53-EVK Freescale board.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/* SOC type must be included before imx-regs.h */
+#define CONFIG_MX53
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx5x_pins.h>
+
+#define CONFIG_SYS_MX5_HCLK 24000000
+#define CONFIG_SYS_MX5_CLK32 32768
+
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+
+#define CONFIG_OF_LIBFDT
+
+/* Size of malloc() pool */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* Enable GPIOs */
+#define CONFIG_MXC_GPIO
+
+/* UART */
+#define CONFIG_MXC_UART
+#define CONFIG_MXC_UART_BASE UART4_BASE_ADDR
+
+/* MMC */
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR 0
+#define CONFIG_SYS_FSL_ESDHC_NUM 1
+
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_DOS_PARTITION
+
+/* Ethernet on FEC */
+#define CONFIG_NET_MULTI
+#define CONFIG_MII
+#define CONFIG_DISCOVER_PHY
+
+#define CONFIG_FEC_MXC
+#define IMX_FEC_BASE FEC_BASE_ADDR
+#define CONFIG_FEC_MXC_PHYADDR 0x01
+#define CONFIG_PHY_ADDR CONFIG_FEC_MXC_PHYADDR
+#define CONFIG_RESET_PHY_R
+#define CONFIG_FEC_MXC_NO_ANEG
+#define CONFIG_PRIME "FEC0"
+
+/* SPI */
+#define CONFIG_HARD_SPI
+#define CONFIG_MXC_SPI
+#define CONFIG_DEFAULT_SPI_BUS 1
+#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
+
+/* SPI FLASH - not used for environment */
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_SPI_FLASH_CS (IOMUX_TO_GPIO(MX53_PIN_CSI0_D11) \
+ << 8) | 0
+#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
+#define CONFIG_SF_DEFAULT_SPEED 25000000
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {9600, 19200, 38400, 57600, 115200}
+
+/* Command definition */
+#include <config_cmd_default.h>
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#define CONFIG_CMD_GPIO
+
+#define CONFIG_BOOTDELAY 3
+
+#define CONFIG_LOADADDR 0x70800000 /* loadaddr env var */
+#define CONFIG_SYS_TEXT_BASE 0xf0001400 /* uboot in nor flash */
+
+#define CONFIG_ARP_TIMEOUT 200UL
+
+/* Miscellaneous configurable options */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+#define CONFIG_SYS_PROMPT "IMA3 MX53 U-Boot > "
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
+#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
+
+#define CONFIG_SYS_MEMTEST_START 0x70000000
+#define CONFIG_SYS_MEMTEST_END 0x10000
+
+#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
+
+#define CONFIG_SYS_HZ 1000
+#define CONFIG_CMDLINE_EDITING
+
+/* Stack sizes */
+#define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
+
+/* Physical Memory Map */
+#define CONFIG_NR_DRAM_BANKS 1
+#define PHYS_SDRAM_1 CSD0_BASE_ADDR
+#define PHYS_SDRAM_1_SIZE (1024 * 1024 * 1024)
+
+#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
+#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
+#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)
+
+#define CONFIG_SYS_INIT_SP_OFFSET \
+ (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_ADDR \
+ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
+
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define MTDIDS_DEFAULT "nor0=f0000000.flash"
+
+/* FLASH and environment organization */
+
+#define CONFIG_SYS_FLASH_BASE 0xF0000000
+#define CONFIG_SYS_FLASH_CFI /* Flash is CFI conformant */
+#define CONFIG_FLASH_CFI_DRIVER /* Use the common driver */
+#define CONFIG_FLASH_CFI_MTD /* with MTD support */
+#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
+#define CONFIG_SYS_MAX_FLASH_BANKS 1
+#define CONFIG_SYS_MAX_FLASH_SECT 1024
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
+
+#define CONFIG_ENV_SIZE (8 * 1024)
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
+ CONFIG_SYS_MONITOR_LEN)
+#define CONFIG_ENV_SECT_SIZE 0x20000
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
+ CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
+
+/*
+ * Default environment and default scripts
+ * to update uboot and load kernel
+ */
+
+#define HOSTNAME ima3-mx53
+#define xstr(s) str(s)
+#define str(s) #s
+
+#define CONFIG_HOSTNAME ima3-mx53
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=${serverip}:${rootpath}\0" \
+ "ramargs=setenv bootargs root=/dev/ram0 rw\0" \
+ "addip_sta=setenv bootargs ${bootargs} " \
+ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
+ ":${hostname}:${netdev}:off panic=1\0" \
+ "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \
+ "addip=if test -n ${ipdyn};then run addip_dyn;" \
+ "else run addip_sta;fi\0" \
+ "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
+ "addtty=setenv bootargs ${bootargs}" \
+ " console=${console},${baudrate}\0" \
+ "addmisc=setenv bootargs ${bootargs} ${misc}\0" \
+ "console=ttymxc3\0" \
+ "loadaddr=70800000\0" \
+ "kernel_addr_r=70800000\0" \
+ "ramdisk_addr_r=71000000\0" \
+ "hostname=" xstr(CONFIG_HOSTNAME) "\0" \
+ "bootfile=" xstr(CONFIG_HOSTNAME) "/uImage\0" \
+ "ramdisk_file=" xstr(CONFIG_HOSTNAME) "/uRamdisk\0" \
+ "mmcargs=setenv bootargs root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "mmcroot=/dev/mmcblk0p3 rw\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs addip addtty addmtd addmisc mmcload;" \
+ "bootm\0" \
+ "mmcload=fatload mmc ${mmcdev}:${mmcpart} " \
+ "${loadaddr} ${uimage}\0" \
+ "mmcrootfstype=ext3 rootwait\0" \
+ "flash_self=run ramargs addip addtty addmtd addmisc;" \
+ "bootm ${kernel_addr} ${ramdisk_addr}\0" \
+ "flash_nfs=run nfsargs addip addtty addmtd addmisc;" \
+ "bootm ${kernel_addr}\0" \
+ "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
+ "run nfsargs addip addtty addmtd addmisc;" \
+ "bootm ${kernel_addr_r}\0" \
+ "net_self_load=tftp ${ramdisk_addr_r} ${ramdisk_file};" \
+ "tftp ${kernel_addr_r} ${bootfile}\0" \
+ "net_self=if run net_self_load;then " \
+ "run ramargs addip addtty addmtd addmisc;" \
+ "bootm ${kernel_addr_r} ${ramdisk_addr_r};" \
+ "else echo Images not loades;fi\0" \
+ "satargs=setenv bootargs root=/dev/sda1\0" \
+ "satafile=boot/uImage\0" \
+ "ssdboot=echo Booting from ssd ...; " \
+ "run satargs addip addtty addmtd addmisc;" \
+ "sata init;ext2load sata 0:1 ${kernel_addr_r} " \
+ "${satafile};bootm\0" \
+ "u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.imx\0" \
+ "uimage=uImage\0" \
+ "load=tftp ${loadaddr} ${u-boot}\0" \
+ "uboot_addr=0xf0001000\0" \
+ "update=protect off 0xf0000000 +60000;" \
+ "erase ${uboot_addr} +60000;" \
+ "cp.b ${loadaddr} ${uboot_addr} ${filesize}\0" \
+ "upd=if run load;then echo Updating u-boot;if run update;" \
+ "then echo U-Boot updated;" \
+ "else echo Error updating u-boot !;" \
+ "echo Board without bootloader !!;" \
+ "fi;" \
+ "else echo U-Boot not downloaded..exiting;fi\0" \
+ "bootcmd=run net_nfs\0"
+
+
+#define CONFIG_CMD_SATA
+#ifdef CONFIG_CMD_SATA
+ #define CONFIG_DWC_AHSATA
+ #define CONFIG_SYS_SATA_MAX_DEVICE 1
+ #define CONFIG_DWC_AHSATA_PORT_ID 0
+ #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
+ #define CONFIG_LBA48
+ #define CONFIG_LIBATA
+#endif
+
+#endif /* __CONFIG_H */
projects / u-boot.git / commitdiff