imx: ventana: export backlight gpio after gpio driver is available

Calling request_gpio to register bklt_gpio with the GPIO driver had no effect
in setup_display called from early board init (although pinmuxing it and
configuring it as output-low does do what it should). Therefore move the
request_gpio later in enable_lvds so that its registered for use by the
gpio command if LVDS is actually enabled.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>

diff --git a/board/gateworks/gw_ventana/gw_ventana.c b/board/gateworks/gw_ventana/gw_ventana.c
index 3b7c82b1dc125fe9c88f7f3921724562a7b1e9bd..7a3d96a039c1adf1ea4cd36a2295931c1569e2d4 100644 (file)
--- a/board/gateworks/gw_ventana/gw_ventana.c
+++ b/board/gateworks/gw_ventana/gw_ventana.c
@@ -317,6 +317,8 @@ static void enable_lvds(struct display_info_t const *dev)
        writel(reg, &iomux->gpr[2]);
 
        /* Enable Backlight */
+       gpio_request(IMX_GPIO_NR(1, 10), "bklt_gpio");
+       gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
        gpio_request(IMX_GPIO_NR(1, 18), "bklt_en");
        SETUP_IOMUX_PAD(PAD_SD1_CMD__GPIO1_IO18 | DIO_PAD_CFG);
        gpio_direction_output(IMX_GPIO_NR(1, 18), 1);
@@ -456,8 +458,7 @@ static void setup_display(void)
               <<IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
        writel(reg, &iomux->gpr[3]);
 
-       /* Backlight CABEN on LVDS connector */
-       gpio_request(IMX_GPIO_NR(1, 10), "bklt_gpio");
+       /* LVDS Backlight GPIO on LVDS connector - output low */
        SETUP_IOMUX_PAD(PAD_SD2_CLK__GPIO1_IO10 | DIO_PAD_CFG);
        gpio_direction_output(IMX_GPIO_NR(1, 10), 0);
 }