phy: phy-imx8mq-usb: Add support for i.MX8MP USB PHY

Add initial support for i.MX8MP USB PHY, i.MX8MP USB is similar to
the i.MX8MQ, except for clock and power domain design customization.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peng Fan <peng.fan@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Tested-By: Tim Harvey <tharvey@gateworks.com> #imx8mp-venice-gw74xx

diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index d79798429b18c42065a85512fc6ed2a6775d5ecf..c01d9e09b901190ec400b039a5722831a022db7c 100644 (file)
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -275,11 +275,11 @@ config PHY_MTK_TPHY
          so you can easily distinguish them by banks layout.
 
 config PHY_IMX8MQ_USB
-       bool "NXP i.MX8MQ USB PHY Driver"
+       bool "NXP i.MX8MQ/i.MX8MP USB PHY Driver"
        depends on PHY
-       depends on IMX8MQ
+       depends on IMX8MQ || IMX8MP
        help
-         Support the USB3.0 PHY in NXP i.MX8MQ SoC
+         Support the USB3.0 PHY in NXP i.MX8MQ or i.MX8MP SoC
 
 config PHY_XILINX_ZYNQMP
        tristate "Xilinx ZynqMP PHY driver"

diff --git a/drivers/phy/phy-imx8mq-usb.c b/drivers/phy/phy-imx8mq-usb.c
index afbc7ad8dd4c614ea97ec46442f7abeb44a1fc06..69f01de5553828eae10053d60443ec48eaeebb0a 100644 (file)
--- a/drivers/phy/phy-imx8mq-usb.c
+++ b/drivers/phy/phy-imx8mq-usb.c
@@ -9,7 +9,9 @@
 #include <dm.h>
 #include <errno.h>
 #include <generic-phy.h>
+#include <linux/bitfield.h>
 #include <linux/bitops.h>
+#include <linux/delay.h>
 #include <linux/err.h>
 #include <clk.h>
 
@@ -68,17 +70,22 @@
 #define PHY_STS0_FSVPLUS               BIT(3)
 #define PHY_STS0_FSVMINUS              BIT(2)
 
+enum imx8mpq_phy_type {
+       IMX8MQ_PHY,
+       IMX8MP_PHY,
+};
+
 struct imx8mq_usb_phy {
 #if CONFIG_IS_ENABLED(CLK)
        struct clk phy_clk;
 #endif
        void __iomem *base;
+       enum imx8mpq_phy_type type;
 };
 
 static const struct udevice_id imx8mq_usb_phy_of_match[] = {
-       {
-               .compatible = "fsl,imx8mq-usb-phy",
-       },
+       { .compatible = "fsl,imx8mq-usb-phy", .data = IMX8MQ_PHY },
+       { .compatible = "fsl,imx8mp-usb-phy", .data = IMX8MP_PHY },
        {},
 };
 
@@ -111,6 +118,56 @@ static int imx8mq_usb_phy_init(struct phy *usb_phy)
        return 0;
 }
 
+static int imx8mp_usb_phy_init(struct phy *usb_phy)
+{
+       struct udevice *dev = usb_phy->dev;
+       struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
+       u32 value;
+
+       /* USB3.0 PHY signal fsel for 24M ref */
+       value = readl(imx_phy->base + PHY_CTRL0);
+       value &= ~PHY_CTRL0_FSEL_MASK;
+       value |= FIELD_PREP(PHY_CTRL0_FSEL_MASK, PHY_CTRL0_FSEL_24M);
+       writel(value, imx_phy->base + PHY_CTRL0);
+
+       /* Disable alt_clk_en and use internal MPLL clocks */
+       value = readl(imx_phy->base + PHY_CTRL6);
+       value &= ~(PHY_CTRL6_ALT_CLK_SEL | PHY_CTRL6_ALT_CLK_EN);
+       writel(value, imx_phy->base + PHY_CTRL6);
+
+       value = readl(imx_phy->base + PHY_CTRL1);
+       value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0);
+       value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
+       writel(value, imx_phy->base + PHY_CTRL1);
+
+       value = readl(imx_phy->base + PHY_CTRL0);
+       value |= PHY_CTRL0_REF_SSP_EN;
+       writel(value, imx_phy->base + PHY_CTRL0);
+
+       value = readl(imx_phy->base + PHY_CTRL2);
+       value |= PHY_CTRL2_TXENABLEN0 | PHY_CTRL2_OTG_DISABLE;
+       writel(value, imx_phy->base + PHY_CTRL2);
+
+       udelay(10);
+
+       value = readl(imx_phy->base + PHY_CTRL1);
+       value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
+       writel(value, imx_phy->base + PHY_CTRL1);
+
+       return 0;
+}
+
+static int imx8mpq_usb_phy_init(struct phy *usb_phy)
+{
+       struct udevice *dev = usb_phy->dev;
+       struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
+
+       if (imx_phy->type == IMX8MP_PHY)
+               return imx8mp_usb_phy_init(usb_phy);
+       else
+               return imx8mq_usb_phy_init(usb_phy);
+}
+
 static int imx8mq_usb_phy_power_on(struct phy *usb_phy)
 {
        struct udevice *dev = usb_phy->dev;
@@ -158,7 +215,7 @@ static int imx8mq_usb_phy_exit(struct phy *usb_phy)
 }
 
 struct phy_ops imx8mq_usb_phy_ops = {
-       .init = imx8mq_usb_phy_init,
+       .init = imx8mpq_usb_phy_init,
        .power_on = imx8mq_usb_phy_power_on,
        .power_off = imx8mq_usb_phy_power_off,
        .exit = imx8mq_usb_phy_exit,
@@ -168,6 +225,7 @@ int imx8mq_usb_phy_probe(struct udevice *dev)
 {
        struct imx8mq_usb_phy *priv = dev_get_priv(dev);
 
+       priv->type = dev_get_driver_data(dev);
        priv->base = dev_read_addr_ptr(dev);
 
        if (!priv->base)