]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
video, da8xx-fb: changes for am335x usage
authorHeiko Schocher <hs@denx.de>
Sat, 3 Aug 2013 05:22:50 +0000 (07:22 +0200)
committerAnatolij Gustschin <agust@denx.de>
Sat, 10 Aug 2013 08:38:28 +0000 (10:38 +0200)
to use this driver also on am335x based boards, the following
changes are made:

- struct lcd_ctrl_config lcd_cfg is now configurable
  through board code

- controller base is configurable through define
  DA8XX_LCD_CNTL_BASE. To be compatible with older
  da8xx based boards: If this define is missing, the
  DAVINCI_LCD_CNTL_BASE is used

- Determine LCD IP Version, and make the driver
  working on lcd revision register values:
  Version 1:
  0x4C100102
  Version 2:
  0x4F200800
  0x4F201000

Signed-off-by: Heiko Schocher <hs@denx.de>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Tom Rini <trini@ti.com>
Acked-by: Tom Rini <trini@ti.com>
board/davinci/ea20/ea20.c
drivers/video/da8xx-fb.c
drivers/video/da8xx-fb.h

index 89ee079ea60ff0f836c7caabbe89a60947740dfe..c4444c7c7f549cd2cb1f24e8cc3619e3a0c24f00 100644 (file)
@@ -43,6 +43,30 @@ static const struct da8xx_panel lcd_panel = {
        .invert_pxl_clk = 0,
 };
 
+static const struct display_panel disp_panel = {
+       QVGA,
+       16,
+       16,
+       COLOR_ACTIVE,
+};
+
+static const struct lcd_ctrl_config lcd_cfg = {
+       &disp_panel,
+       .ac_bias                = 255,
+       .ac_bias_intrpt         = 0,
+       .dma_burst_sz           = 16,
+       .bpp                    = 16,
+       .fdd                    = 255,
+       .tft_alt_mode           = 0,
+       .stn_565_mode           = 0,
+       .mono_8bit_mode         = 0,
+       .invert_line_clock      = 1,
+       .invert_frm_clock       = 1,
+       .sync_edge              = 0,
+       .sync_ctrl              = 1,
+       .raster_order           = 0,
+};
+
 /* SPI0 pin muxer settings */
 static const struct pinmux_config spi1_pins[] = {
        { pinmux(5), 1, 1 },
@@ -259,7 +283,7 @@ int board_init(void)
        /* address of boot parameters */
        gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
 
-       da8xx_video_init(&lcd_panel, 16);
+       da8xx_video_init(&lcd_panel, &lcd_cfg, 16);
 
        return 0;
 }
index dd7ce360609c3b02bf2bd4655a6d57d1b8cc56fd..b0bde2d7ae3fabf2570914f625f5aba30a19f518 100644 (file)
 #include "videomodes.h"
 #include "da8xx-fb.h"
 
+#if !defined(DA8XX_LCD_CNTL_BASE)
+#define DA8XX_LCD_CNTL_BASE    DAVINCI_LCD_CNTL_BASE
+#endif
+
 #define DRIVER_NAME "da8xx_lcdc"
 
+#define LCD_VERSION_1  1
+#define LCD_VERSION_2  2
+
 /* LCD Status Register */
 #define LCD_END_OF_FRAME1              (1 << 9)
 #define LCD_END_OF_FRAME0              (1 << 8)
 #define LCD_DMA_BURST_4                        0x2
 #define LCD_DMA_BURST_8                        0x3
 #define LCD_DMA_BURST_16               0x4
-#define LCD_END_OF_FRAME_INT_ENA       (1 << 2)
+#define LCD_V1_END_OF_FRAME_INT_ENA    (1 << 2)
+#define LCD_V2_END_OF_FRAME0_INT_ENA   (1 << 8)
+#define LCD_V2_END_OF_FRAME1_INT_ENA   (1 << 9)
 #define LCD_DUAL_FRAME_BUFFER_ENABLE   (1 << 0)
 
+#define LCD_V2_TFT_24BPP_MODE          (1 << 25)
+#define LCD_V2_TFT_24BPP_UNPACK                (1 << 26)
+
 /* LCD Control Register */
 #define LCD_CLK_DIVISOR(x)             ((x) << 8)
 #define LCD_RASTER_MODE                        0x01
 #define LCD_MONO_8BIT_MODE             (1 << 9)
 #define LCD_RASTER_ORDER               (1 << 8)
 #define LCD_TFT_MODE                   (1 << 7)
-#define LCD_UNDERFLOW_INT_ENA          (1 << 6)
-#define LCD_PL_ENABLE                  (1 << 4)
+#define LCD_V1_UNDERFLOW_INT_ENA       (1 << 6)
+#define LCD_V2_UNDERFLOW_INT_ENA       (1 << 5)
+#define LCD_V1_PL_INT_ENA              (1 << 4)
+#define LCD_V2_PL_INT_ENA              (1 << 6)
 #define LCD_MONOCHROME_MODE            (1 << 1)
 #define LCD_RASTER_ENABLE              (1 << 0)
 #define LCD_TFT_ALT_ENABLE             (1 << 23)
 #define LCD_STN_565_ENABLE             (1 << 24)
+#define LCD_V2_DMA_CLK_EN              (1 << 2)
+#define LCD_V2_LIDD_CLK_EN             (1 << 1)
+#define LCD_V2_CORE_CLK_EN             (1 << 0)
+#define LCD_V2_LPP_B10                 26
+#define LCD_V2_TFT_24BPP_MODE          (1 << 25)
+#define LCD_V2_TFT_24BPP_UNPACK                (1 << 26)
 
 /* LCD Raster Timing 2 Register */
 #define LCD_AC_BIAS_TRANSITIONS_PER_INT(x)     ((x) << 16)
@@ -74,6 +94,8 @@
 #define LCD_INVERT_LINE_CLOCK                  (1 << 21)
 #define LCD_INVERT_FRAME_CLOCK                 (1 << 20)
 
+/* Clock registers available only on Version 2 */
+#define  LCD_CLK_MAIN_RESET                    (1 << 3)
 /* LCD Block */
 struct da8xx_lcd_regs {
        u32     revid;
@@ -97,6 +119,15 @@ struct da8xx_lcd_regs {
        u32     dma_frm_buf_ceiling_addr_0;
        u32     dma_frm_buf_base_addr_1;
        u32     dma_frm_buf_ceiling_addr_1;
+       u32     resv1;
+       u32     raw_stat;
+       u32     masked_stat;
+       u32     int_ena_set;
+       u32     int_ena_clr;
+       u32     end_of_int_ind;
+       /* Clock registers available only on Version 2 */
+       u32     clk_ena;
+       u32     clk_reset;
 };
 
 #define LCD_NUM_BUFFERS        1
@@ -107,6 +138,8 @@ struct da8xx_lcd_regs {
 #define RIGHT_MARGIN   64
 #define UPPER_MARGIN   32
 #define LOWER_MARGIN   32
+#define WAIT_FOR_FRAME_DONE    true
+#define NO_WAIT_FOR_FRAME_DONE false
 
 #define calc_fbsize() (panel.plnSizeX * panel.plnSizeY * panel.gdfBytesPP)
 
@@ -119,6 +152,8 @@ static GraphicDevice gpanel;
 static const struct da8xx_panel *lcd_panel;
 static struct fb_info *da8xx_fb_info;
 static int bits_x_pixel;
+static unsigned int lcd_revision;
+const struct lcd_ctrl_config *da8xx_lcd_cfg;
 
 static inline unsigned int lcdc_read(u32 *addr)
 {
@@ -179,35 +214,24 @@ static struct fb_fix_screeninfo da8xx_fb_fix = {
        .accel = FB_ACCEL_NONE
 };
 
-static const struct display_panel disp_panel = {
-       QVGA,
-       16,
-       16,
-       COLOR_ACTIVE,
-};
-
-static const struct lcd_ctrl_config lcd_cfg = {
-       &disp_panel,
-       .ac_bias                = 255,
-       .ac_bias_intrpt         = 0,
-       .dma_burst_sz           = 16,
-       .bpp                    = 16,
-       .fdd                    = 255,
-       .tft_alt_mode           = 0,
-       .stn_565_mode           = 0,
-       .mono_8bit_mode         = 0,
-       .invert_line_clock      = 1,
-       .invert_frm_clock       = 1,
-       .sync_edge              = 0,
-       .sync_ctrl              = 1,
-       .raster_order           = 0,
-};
-
 /* Enable the Raster Engine of the LCD Controller */
 static inline void lcd_enable_raster(void)
 {
        u32 reg;
 
+       /* Put LCDC in reset for several cycles */
+       if (lcd_revision == LCD_VERSION_2)
+               lcdc_write(LCD_CLK_MAIN_RESET,
+                          &da8xx_fb_reg_base->clk_reset);
+
+       udelay(1000);
+       /* Bring LCDC out of reset */
+       if (lcd_revision == LCD_VERSION_2)
+               lcdc_write(0,
+                          &da8xx_fb_reg_base->clk_reset);
+
+       udelay(1000);
+
        reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
        if (!(reg & LCD_RASTER_ENABLE))
                lcdc_write(reg | LCD_RASTER_ENABLE,
@@ -215,14 +239,40 @@ static inline void lcd_enable_raster(void)
 }
 
 /* Disable the Raster Engine of the LCD Controller */
-static inline void lcd_disable_raster(void)
+static inline void lcd_disable_raster(bool wait_for_frame_done)
 {
        u32 reg;
+       u32 loop_cnt = 0;
+       u32 stat;
+       u32 i = 0;
+
+       if (wait_for_frame_done)
+               loop_cnt = 5000;
 
        reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
        if (reg & LCD_RASTER_ENABLE)
                lcdc_write(reg & ~LCD_RASTER_ENABLE,
                        &da8xx_fb_reg_base->raster_ctrl);
+
+       /* Wait for the current frame to complete */
+       do {
+               if (lcd_revision == LCD_VERSION_1)
+                       stat = lcdc_read(&da8xx_fb_reg_base->stat);
+               else
+                       stat = lcdc_read(&da8xx_fb_reg_base->raw_stat);
+
+               mdelay(1);
+       } while (!(stat & 0x01) && (i++ < loop_cnt));
+
+       if (lcd_revision == LCD_VERSION_1)
+               lcdc_write(stat, &da8xx_fb_reg_base->stat);
+       else
+               lcdc_write(stat, &da8xx_fb_reg_base->raw_stat);
+
+       if ((loop_cnt != 0) && (i >= loop_cnt)) {
+               printf("LCD Controller timed out\n");
+               return;
+       }
 }
 
 static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
@@ -231,6 +281,7 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
        u32 end;
        u32 reg_ras;
        u32 reg_dma;
+       u32 reg_int;
 
        /* init reg to clear PLM (loading mode) fields */
        reg_ras = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
@@ -243,7 +294,15 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
                end      = par->dma_end;
 
                reg_ras |= LCD_PALETTE_LOAD_MODE(DATA_ONLY);
-               reg_dma |= LCD_END_OF_FRAME_INT_ENA;
+               if (lcd_revision == LCD_VERSION_1) {
+                       reg_dma |= LCD_V1_END_OF_FRAME_INT_ENA;
+               } else {
+                       reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
+                               LCD_V2_END_OF_FRAME0_INT_ENA |
+                               LCD_V2_END_OF_FRAME1_INT_ENA |
+                               LCD_V2_UNDERFLOW_INT_ENA | LCD_SYNC_LOST;
+                       lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
+               }
 
 #if (LCD_NUM_BUFFERS == 2)
                reg_dma |= LCD_DUAL_FRAME_BUFFER_ENABLE;
@@ -264,7 +323,13 @@ static void lcd_blit(int load_mode, struct da8xx_fb_par *par)
                end      = start + par->palette_sz - 1;
 
                reg_ras |= LCD_PALETTE_LOAD_MODE(PALETTE_ONLY);
-               reg_ras |= LCD_PL_ENABLE;
+               if (lcd_revision == LCD_VERSION_1) {
+                       reg_ras |= LCD_V1_PL_INT_ENA;
+               } else {
+                       reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
+                               LCD_V2_PL_INT_ENA;
+                       lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
+               }
 
                lcdc_write(start, &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
                lcdc_write(end, &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
@@ -348,6 +413,7 @@ static void lcd_cfg_vertical_sync(int back_porch, int pulse_width,
 static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
 {
        u32 reg;
+       u32 reg_int;
 
        reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(LCD_TFT_MODE |
                                                LCD_MONO_8BIT_MODE |
@@ -375,7 +441,13 @@ static int lcd_cfg_display(const struct lcd_ctrl_config *cfg)
        }
 
        /* enable additional interrupts here */
-       reg |= LCD_UNDERFLOW_INT_ENA;
+       if (lcd_revision == LCD_VERSION_1) {
+               reg |= LCD_V1_UNDERFLOW_INT_ENA;
+       } else {
+               reg_int = lcdc_read(&da8xx_fb_reg_base->int_ena_set) |
+                       LCD_V2_UNDERFLOW_INT_ENA;
+               lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_set);
+       }
 
        lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
 
@@ -413,22 +485,53 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
 
        /* Set the Panel Width */
        /* Pixels per line = (PPL + 1)*16 */
-       /*0x3F in bits 4..9 gives max horisontal resolution = 1024 pixels*/
-       width &= 0x3f0;
+       if (lcd_revision == LCD_VERSION_1) {
+               /*
+                * 0x3F in bits 4..9 gives max horisontal resolution = 1024
+                * pixels
+                */
+               width &= 0x3f0;
+       } else {
+               /*
+                * 0x7F in bits 4..10 gives max horizontal resolution = 2048
+                * pixels.
+                */
+               width &= 0x7f0;
+       }
        reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_0);
        reg &= 0xfffffc00;
-       reg |= ((width >> 4) - 1) << 4;
+       if (lcd_revision == LCD_VERSION_1) {
+               reg |= ((width >> 4) - 1) << 4;
+       } else {
+               width = (width >> 4) - 1;
+               reg |= ((width & 0x3f) << 4) | ((width & 0x40) >> 3);
+       }
        lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_0);
 
        /* Set the Panel Height */
+       /* Set bits 9:0 of Lines Per Pixel */
        reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_1);
        reg = ((height - 1) & 0x3ff) | (reg & 0xfffffc00);
        lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_1);
 
+       /* Set bit 10 of Lines Per Pixel */
+       if (lcd_revision == LCD_VERSION_2) {
+               reg = lcdc_read(&da8xx_fb_reg_base->raster_timing_2);
+               reg |= ((height - 1) & 0x400) << 16;
+               lcdc_write(reg, &da8xx_fb_reg_base->raster_timing_2);
+       }
+
        /* Set the Raster Order of the Frame Buffer */
        reg = lcdc_read(&da8xx_fb_reg_base->raster_ctrl) & ~(1 << 8);
        if (raster_order)
                reg |= LCD_RASTER_ORDER;
+
+       if (bpp == 24)
+               reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE);
+       else if (bpp == 32)
+               reg |= (LCD_TFT_MODE | LCD_V2_TFT_24BPP_MODE
+                               | LCD_V2_TFT_24BPP_UNPACK);
+
        lcdc_write(reg, &da8xx_fb_reg_base->raster_ctrl);
 
        switch (bpp) {
@@ -436,6 +539,8 @@ static int lcd_cfg_frame_buffer(struct da8xx_fb_par *par, u32 width, u32 height,
        case 2:
        case 4:
        case 16:
+       case 24:
+       case 32:
                par->palette_sz = 16 * 2;
                break;
 
@@ -490,6 +595,23 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 
                par->pseudo_palette[regno] = red | green | blue;
 
+               if (palette[0] != 0x4000) {
+                       update_hw = 1;
+                       palette[0] = 0x4000;
+               }
+       } else if (((info->var.bits_per_pixel == 32) && regno < 32) ||
+                  ((info->var.bits_per_pixel == 24) && regno < 24)) {
+               red >>= (24 - info->var.red.length);
+               red <<= info->var.red.offset;
+
+               green >>= (24 - info->var.green.length);
+               green <<= info->var.green.offset;
+
+               blue >>= (24 - info->var.blue.length);
+               blue <<= info->var.blue.offset;
+
+               par->pseudo_palette[regno] = red | green | blue;
+
                if (palette[0] != 0x4000) {
                        update_hw = 1;
                        palette[0] = 0x4000;
@@ -506,11 +628,18 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 static void lcd_reset(struct da8xx_fb_par *par)
 {
        /* Disable the Raster if previously Enabled */
-       lcd_disable_raster();
+       lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
 
        /* DMA has to be disabled */
        lcdc_write(0, &da8xx_fb_reg_base->dma_ctrl);
        lcdc_write(0, &da8xx_fb_reg_base->raster_ctrl);
+
+       if (lcd_revision == LCD_VERSION_2) {
+               lcdc_write(0, &da8xx_fb_reg_base->int_ena_set);
+               /* Write 1 to reset */
+               lcdc_write(LCD_CLK_MAIN_RESET, &da8xx_fb_reg_base->clk_reset);
+               lcdc_write(0, &da8xx_fb_reg_base->clk_reset);
+       }
 }
 
 static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
@@ -521,12 +650,17 @@ static void lcd_calc_clk_divider(struct da8xx_fb_par *par)
        lcd_clk = clk_get(2);
 
        div = lcd_clk / par->pxl_clk;
-       debug("LCD Clock: 0x%x Divider: 0x%x PixClk: 0x%x\n",
-               lcd_clk, div, par->pxl_clk);
+       debug("LCD Clock: %d Divider: %d PixClk: %d\n",
+             lcd_clk, div, par->pxl_clk);
 
        /* Configure the LCD clock divisor. */
        lcdc_write(LCD_CLK_DIVISOR(div) |
                        (LCD_RASTER_MODE & 0x1), &da8xx_fb_reg_base->ctrl);
+
+       if (lcd_revision == LCD_VERSION_2)
+               lcdc_write(LCD_V2_DMA_CLK_EN | LCD_V2_LIDD_CLK_EN |
+                               LCD_V2_CORE_CLK_EN,
+                               &da8xx_fb_reg_base->clk_ena);
 }
 
 static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
@@ -566,7 +700,8 @@ static int lcd_init(struct da8xx_fb_par *par, const struct lcd_ctrl_config *cfg,
        if (ret < 0)
                return ret;
 
-       if (QVGA != cfg->p_disp_panel->panel_type)
+       if ((QVGA != cfg->p_disp_panel->panel_type) &&
+           (WVGA != cfg->p_disp_panel->panel_type))
                return -EINVAL;
 
        if (cfg->bpp <= cfg->p_disp_panel->max_bpp &&
@@ -602,7 +737,7 @@ static void lcdc_dma_start(void)
                &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_1);
 }
 
-static u32 lcdc_irq_handler(void)
+static u32 lcdc_irq_handler_rev01(void)
 {
        struct da8xx_fb_par *par = da8xx_fb_info->par;
        u32 stat = lcdc_read(&da8xx_fb_reg_base->stat);
@@ -610,7 +745,7 @@ static u32 lcdc_irq_handler(void)
 
        if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
                debug("LCD_SYNC_LOST\n");
-               lcd_disable_raster();
+               lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
                lcdc_write(stat, &da8xx_fb_reg_base->stat);
                lcd_enable_raster();
                return LCD_SYNC_LOST;
@@ -622,13 +757,13 @@ static u32 lcdc_irq_handler(void)
                 * interrupt via the following write to the status register. If
                 * this is done after then one gets multiple PL done interrupts.
                 */
-               lcd_disable_raster();
+               lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
 
                lcdc_write(stat, &da8xx_fb_reg_base->stat);
 
                /* Disable PL completion inerrupt */
                reg_ras  = lcdc_read(&da8xx_fb_reg_base->raster_ctrl);
-               reg_ras &= ~LCD_PL_ENABLE;
+               reg_ras &= ~LCD_V1_PL_INT_ENA;
                lcdc_write(reg_ras, &da8xx_fb_reg_base->raster_ctrl);
 
                /* Setup and start data loading mode */
@@ -650,6 +785,66 @@ static u32 lcdc_irq_handler(void)
        return stat;
 }
 
+static u32 lcdc_irq_handler_rev02(void)
+{
+       struct da8xx_fb_par *par = da8xx_fb_info->par;
+       u32 stat = lcdc_read(&da8xx_fb_reg_base->masked_stat);
+       u32 reg_int;
+
+       if ((stat & LCD_SYNC_LOST) && (stat & LCD_FIFO_UNDERFLOW)) {
+               debug("LCD_SYNC_LOST\n");
+               lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
+               lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
+               lcd_enable_raster();
+               lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
+               return LCD_SYNC_LOST;
+       } else if (stat & LCD_PL_LOAD_DONE) {
+               debug("LCD_PL_LOAD_DONE\n");
+               /*
+                * Must disable raster before changing state of any control bit.
+                * And also must be disabled before clearing the PL loading
+                * interrupt via the following write to the status register. If
+                * this is done after then one gets multiple PL done interrupts.
+                */
+               lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
+
+               lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
+
+               /* Disable PL completion inerrupt */
+               reg_int  = lcdc_read(&da8xx_fb_reg_base->int_ena_clr) |
+                       (LCD_V2_PL_INT_ENA);
+               lcdc_write(reg_int, &da8xx_fb_reg_base->int_ena_clr);
+
+               /* Setup and start data loading mode */
+               lcd_blit(LOAD_DATA, par);
+               lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
+               return LCD_PL_LOAD_DONE;
+       } else {
+               lcdc_write(stat, &da8xx_fb_reg_base->masked_stat);
+
+               if (stat & LCD_END_OF_FRAME0)
+                       debug("LCD_END_OF_FRAME0\n");
+
+               lcdc_write(par->dma_start,
+                          &da8xx_fb_reg_base->dma_frm_buf_base_addr_0);
+               lcdc_write(par->dma_end,
+                          &da8xx_fb_reg_base->dma_frm_buf_ceiling_addr_0);
+               par->vsync_flag = 1;
+               lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
+               return LCD_END_OF_FRAME0;
+       }
+       lcdc_write(0, &da8xx_fb_reg_base->end_of_int_ind);
+       return stat;
+}
+
+static u32 lcdc_irq_handler(void)
+{
+       if (lcd_revision == LCD_VERSION_1)
+               return lcdc_irq_handler_rev01();
+       else
+               return lcdc_irq_handler_rev02();
+}
+
 static u32 wait_for_event(u32 event)
 {
        u32 timeout = 50000;
@@ -673,6 +868,7 @@ void *video_hw_init(void)
 {
        struct da8xx_fb_par *par;
        u32 size;
+       u32 rev;
        char *p;
 
        if (!lcd_panel) {
@@ -685,6 +881,10 @@ void *video_hw_init(void)
        gpanel.plnSizeY = lcd_panel->height;
 
        switch (bits_x_pixel) {
+       case 32:
+               gpanel.gdfBytesPP = 4;
+               gpanel.gdfIndex = GDF_32BIT_X888RGB;
+               break;
        case 24:
                gpanel.gdfBytesPP = 4;
                gpanel.gdfIndex = GDF_32BIT_X888RGB;
@@ -699,12 +899,29 @@ void *video_hw_init(void)
                break;
        }
 
-       da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DAVINCI_LCD_CNTL_BASE;
+       da8xx_fb_reg_base = (struct da8xx_lcd_regs *)DA8XX_LCD_CNTL_BASE;
+
+       /* Determine LCD IP Version */
+       rev = lcdc_read(&da8xx_fb_reg_base->revid);
+       switch (rev) {
+       case 0x4C100102:
+               lcd_revision = LCD_VERSION_1;
+               break;
+       case 0x4F200800:
+       case 0x4F201000:
+               lcd_revision = LCD_VERSION_2;
+               break;
+       default:
+               printf("Unknown PID Reg value 0x%x, defaulting to LCD revision 1\n",
+                      rev);
+               lcd_revision = LCD_VERSION_1;
+               break;
+       }
 
-       debug("Resolution: %dx%d %x\n",
-               gpanel.winSizeX,
-               gpanel.winSizeY,
-               lcd_cfg.bpp);
+       debug("rev: 0x%x Resolution: %dx%d %d\n", rev,
+             gpanel.winSizeX,
+             gpanel.winSizeY,
+             da8xx_lcd_cfg->bpp);
 
        size = sizeof(struct fb_info) + sizeof(struct da8xx_fb_par);
        da8xx_fb_info = malloc(size);
@@ -722,13 +939,14 @@ void *video_hw_init(void)
        par = da8xx_fb_info->par;
        par->pxl_clk = lcd_panel->pxl_clk;
 
-       if (lcd_init(par, &lcd_cfg, lcd_panel) < 0) {
+       if (lcd_init(par, da8xx_lcd_cfg, lcd_panel) < 0) {
                printf("lcd_init failed\n");
                goto err_release_fb;
        }
 
        /* allocate frame buffer */
-       par->vram_size = lcd_panel->width * lcd_panel->height * lcd_cfg.bpp;
+       par->vram_size = lcd_panel->width * lcd_panel->height *
+                       da8xx_lcd_cfg->bpp;
        par->vram_size = par->vram_size * LCD_NUM_BUFFERS / 8;
 
        par->vram_virt = malloc(par->vram_size);
@@ -746,7 +964,7 @@ void *video_hw_init(void)
        da8xx_fb_info->screen_base = (char *) par->vram_virt;
        da8xx_fb_fix.smem_start = gpanel.frameAdrs;
        da8xx_fb_fix.smem_len = par->vram_size;
-       da8xx_fb_fix.line_length = (lcd_panel->width * lcd_cfg.bpp) / 8;
+       da8xx_fb_fix.line_length = (lcd_panel->width * da8xx_lcd_cfg->bpp) / 8;
 
        par->dma_start = par->vram_phys;
        par->dma_end   = par->dma_start + lcd_panel->height *
@@ -762,7 +980,7 @@ void *video_hw_init(void)
        par->p_palette_base = (unsigned int)par->v_palette_base;
 
        /* Initialize par */
-       da8xx_fb_info->var.bits_per_pixel = lcd_cfg.bpp;
+       da8xx_fb_info->var.bits_per_pixel = da8xx_lcd_cfg->bpp;
 
        da8xx_fb_var.xres = lcd_panel->width;
        da8xx_fb_var.xres_virtual = lcd_panel->width;
@@ -771,8 +989,8 @@ void *video_hw_init(void)
        da8xx_fb_var.yres_virtual = lcd_panel->height * LCD_NUM_BUFFERS;
 
        da8xx_fb_var.grayscale =
-           lcd_cfg.p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
-       da8xx_fb_var.bits_per_pixel = lcd_cfg.bpp;
+           da8xx_lcd_cfg->p_disp_panel->panel_shade == MONOCHROME ? 1 : 0;
+       da8xx_fb_var.bits_per_pixel = da8xx_lcd_cfg->bpp;
 
        da8xx_fb_var.hsync_len = lcd_panel->hsw;
        da8xx_fb_var.vsync_len = lcd_panel->vsw;
@@ -787,8 +1005,11 @@ void *video_hw_init(void)
 
        /* Clear interrupt */
        memset((void *)par->vram_virt, 0, par->vram_size);
-       lcd_disable_raster();
-       lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat);
+       lcd_disable_raster(NO_WAIT_FOR_FRAME_DONE);
+       if (lcd_revision == LCD_VERSION_1)
+               lcdc_write(0xFFFF, &da8xx_fb_reg_base->stat);
+       else
+               lcdc_write(0xFFFF, &da8xx_fb_reg_base->masked_stat);
        debug("Palette at 0x%x size %d\n", par->p_palette_base,
                par->palette_sz);
        lcdc_dma_start();
@@ -823,8 +1044,10 @@ void video_set_lut(unsigned int index,    /* color number */
        return;
 }
 
-void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel)
+void da8xx_video_init(const struct da8xx_panel *panel,
+                     const struct lcd_ctrl_config *lcd_cfg, int bits_pixel)
 {
        lcd_panel = panel;
+       da8xx_lcd_cfg = lcd_cfg;
        bits_x_pixel = bits_pixel;
 }
index f48fdfdc45c6553c615b216ca2b78e9f30071216..6447a4047de204259d6c9ab15b63770ff53aaaee 100644 (file)
@@ -109,6 +109,8 @@ struct lcd_sync_arg {
        int pulse_width;
 };
 
-void da8xx_video_init(const struct da8xx_panel *panel, int bits_pixel);
+void da8xx_video_init(const struct da8xx_panel *panel,
+                     const struct lcd_ctrl_config *lcd_cfg,
+                     int bits_pixel);
 
 #endif  /* ifndef DA8XX_FB_H */