da850evm : enable NAND even when not in NAND boot mode

There is currently no NAND pinmux enabled by the da850evm board setup code.
This is fine when booting from NAND since the early boot code (UBL) will setup
the pinmux; however, when the boot mode is any other setting NAND is unusable
when enabled in the config.

This patch adds a pinmux list for NAND and enables it when NAND is enabled in
the config. Tested by booting from SPI on the da850evm and verifying NAND
was usable.

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
CC: Nick Thompson <nick.thompson@ge.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c
index eeb456c67edfec019bb2352eae714a6987945b3c..f84adb9b62bc64d517fd84c2651962111587de43 100644 (file)
--- a/board/davinci/da8xxevm/da850evm.c
+++ b/board/davinci/da8xxevm/da850evm.c
@@ -54,12 +54,34 @@ static const struct pinmux_config i2c_pins[] = {
        { pinmux(4), 2, 3 }
 };
 
+#ifdef CONFIG_NAND_DAVINCI
+const struct pinmux_config nand_pins[] = {
+       { pinmux(7), 1, 1 },
+       { pinmux(7), 1, 2 },
+       { pinmux(7), 1, 4 },
+       { pinmux(7), 1, 5 },
+       { pinmux(9), 1, 0 },
+       { pinmux(9), 1, 1 },
+       { pinmux(9), 1, 2 },
+       { pinmux(9), 1, 3 },
+       { pinmux(9), 1, 4 },
+       { pinmux(9), 1, 5 },
+       { pinmux(9), 1, 6 },
+       { pinmux(9), 1, 7 },
+       { pinmux(12), 1, 5 },
+       { pinmux(12), 1, 6 }
+};
+#endif
+
 static const struct pinmux_resource pinmuxes[] = {
 #ifdef CONFIG_SPI_FLASH
        PINMUX_ITEM(spi1_pins),
 #endif
        PINMUX_ITEM(uart_pins),
        PINMUX_ITEM(i2c_pins),
+#ifdef CONFIG_NAND_DAVINCI
+       PINMUX_ITEM(nand_pins),
+#endif
 };
 
 static const struct lpsc_resource lpsc[] = {