]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
xhci: mediatek: Add support for MTK xHCI host controller
authorChunfeng Yun <chunfeng.yun@mediatek.com>
Sat, 2 May 2020 09:35:18 +0000 (11:35 +0200)
committerMarek Vasut <marek.vasut+renesas@gmail.com>
Sat, 2 May 2020 10:32:28 +0000 (12:32 +0200)
This patch is used to support the on-chip xHCI controller on
MediaTek SoCs, currently control/bulk/interrupt transfers are
supported.

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Reviewed-by: Weijie Gao <weijie.gao@mediatek.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
drivers/usb/host/Kconfig
drivers/usb/host/Makefile
drivers/usb/host/xhci-mtk.c [new file with mode: 0644]
drivers/usb/host/xhci.c
include/usb/xhci.h

index 94ac969058e680a0c4bdccb414346382213d2446..2f381dc9580c37794d86efeddca63e6dc2eac18d 100644 (file)
@@ -30,6 +30,12 @@ config USB_XHCI_DWC3_OF_SIMPLE
          Support USB2/3 functionality in simple SoC integrations with
          USB controller based on the DesignWare USB3 IP Core.
 
+config USB_XHCI_MTK
+       bool "Support for MediaTek on-chip xHCI USB controller"
+       depends on ARCH_MEDIATEK
+       help
+         Enables support for the on-chip xHCI controller on MediaTek SoCs.
+
 config USB_XHCI_MVEBU
        bool "MVEBU USB 3.0 support"
        default y
index b62f346094fad811a2ebf75a71ecca564397ba9f..e8e3b17e42c6f4f03839dfca657d89d900d4f9a7 100644 (file)
@@ -51,6 +51,7 @@ obj-$(CONFIG_USB_XHCI_DWC3_OF_SIMPLE) += dwc3-of-simple.o
 obj-$(CONFIG_USB_XHCI_ROCKCHIP) += xhci-rockchip.o
 obj-$(CONFIG_USB_XHCI_EXYNOS) += xhci-exynos5.o
 obj-$(CONFIG_USB_XHCI_FSL) += xhci-fsl.o
+obj-$(CONFIG_USB_XHCI_MTK) += xhci-mtk.o
 obj-$(CONFIG_USB_XHCI_MVEBU) += xhci-mvebu.o
 obj-$(CONFIG_USB_XHCI_OMAP) += xhci-omap.o
 obj-$(CONFIG_USB_XHCI_PCI) += xhci-pci.o
diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
new file mode 100644 (file)
index 0000000..8ff7185
--- /dev/null
@@ -0,0 +1,303 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (c) 2019 MediaTek, Inc.
+ * Authors: Chunfeng Yun <chunfeng.yun@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <dm.h>
+#include <dm/devres.h>
+#include <generic-phy.h>
+#include <malloc.h>
+#include <usb.h>
+#include <linux/errno.h>
+#include <linux/compat.h>
+#include <power/regulator.h>
+#include <linux/iopoll.h>
+#include <usb/xhci.h>
+
+/* IPPC (IP Port Control) registers */
+#define IPPC_IP_PW_CTRL0               0x00
+#define CTRL0_IP_SW_RST                        BIT(0)
+
+#define IPPC_IP_PW_CTRL1               0x04
+#define CTRL1_IP_HOST_PDN              BIT(0)
+
+#define IPPC_IP_PW_STS1                        0x10
+#define STS1_IP_SLEEP_STS              BIT(30)
+#define STS1_U3_MAC_RST                        BIT(16)
+#define STS1_XHCI_RST                  BIT(11)
+#define STS1_SYS125_RST                        BIT(10)
+#define STS1_REF_RST                   BIT(8)
+#define STS1_SYSPLL_STABLE             BIT(0)
+
+#define IPPC_IP_XHCI_CAP               0x24
+#define CAP_U3_PORT_NUM(p)             ((p) & 0xff)
+#define CAP_U2_PORT_NUM(p)             (((p) >> 8) & 0xff)
+
+#define IPPC_U3_CTRL_0P                        0x30
+#define CTRL_U3_PORT_HOST_SEL          BIT(2)
+#define CTRL_U3_PORT_PDN               BIT(1)
+#define CTRL_U3_PORT_DIS               BIT(0)
+
+#define IPPC_U2_CTRL_0P                        0x50
+#define CTRL_U2_PORT_HOST_SEL          BIT(2)
+#define CTRL_U2_PORT_PDN               BIT(1)
+#define CTRL_U2_PORT_DIS               BIT(0)
+
+#define IPPC_U3_CTRL(p)        (IPPC_U3_CTRL_0P + ((p) * 0x08))
+#define IPPC_U2_CTRL(p)        (IPPC_U2_CTRL_0P + ((p) * 0x08))
+
+struct mtk_xhci {
+       struct xhci_ctrl ctrl;  /* Needs to come first in this struct! */
+       struct xhci_hccr *hcd;
+       void __iomem *ippc;
+       struct udevice *dev;
+       struct udevice *vusb33_supply;
+       struct udevice *vbus_supply;
+       struct clk_bulk clks;
+       struct phy_bulk phys;
+       int num_u2ports;
+       int num_u3ports;
+};
+
+static int xhci_mtk_host_enable(struct mtk_xhci *mtk)
+{
+       u32 value;
+       u32 check_val;
+       int ret;
+       int i;
+
+       /* power on host ip */
+       clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
+
+       /* power on and enable all u3 ports */
+       for (i = 0; i < mtk->num_u3ports; i++) {
+               clrsetbits_le32(mtk->ippc + IPPC_U3_CTRL(i),
+                               CTRL_U3_PORT_PDN | CTRL_U3_PORT_DIS,
+                               CTRL_U3_PORT_HOST_SEL);
+       }
+
+       /* power on and enable all u2 ports */
+       for (i = 0; i < mtk->num_u2ports; i++) {
+               clrsetbits_le32(mtk->ippc + IPPC_U2_CTRL(i),
+                               CTRL_U2_PORT_PDN | CTRL_U2_PORT_DIS,
+                               CTRL_U2_PORT_HOST_SEL);
+       }
+
+       /*
+        * wait for clocks to be stable, and clock domains reset to
+        * be inactive after power on and enable ports
+        */
+       check_val = STS1_SYSPLL_STABLE | STS1_REF_RST |
+                       STS1_SYS125_RST | STS1_XHCI_RST;
+
+       if (mtk->num_u3ports)
+               check_val |= STS1_U3_MAC_RST;
+
+       ret = readl_poll_timeout(mtk->ippc + IPPC_IP_PW_STS1, value,
+                                (check_val == (value & check_val)), 20000);
+       if (ret)
+               dev_err(mtk->dev, "clocks are not stable 0x%x!\n", value);
+
+       return ret;
+}
+
+static int xhci_mtk_host_disable(struct mtk_xhci *mtk)
+{
+       int i;
+
+       /* power down all u3 ports */
+       for (i = 0; i < mtk->num_u3ports; i++)
+               setbits_le32(mtk->ippc + IPPC_U3_CTRL(i), CTRL_U3_PORT_PDN);
+
+       /* power down all u2 ports */
+       for (i = 0; i < mtk->num_u2ports; i++)
+               setbits_le32(mtk->ippc + IPPC_U2_CTRL(i), CTRL_U2_PORT_PDN);
+
+       /* power down host ip */
+       setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL1, CTRL1_IP_HOST_PDN);
+
+       return 0;
+}
+
+static int xhci_mtk_ssusb_init(struct mtk_xhci *mtk)
+{
+       u32 value;
+
+       /* reset whole ip */
+       setbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+       udelay(1);
+       clrbits_le32(mtk->ippc + IPPC_IP_PW_CTRL0, CTRL0_IP_SW_RST);
+
+       value = readl(mtk->ippc + IPPC_IP_XHCI_CAP);
+       mtk->num_u3ports = CAP_U3_PORT_NUM(value);
+       mtk->num_u2ports = CAP_U2_PORT_NUM(value);
+       dev_info(mtk->dev, "u2p:%d, u3p:%d\n",
+                mtk->num_u2ports, mtk->num_u3ports);
+
+       return xhci_mtk_host_enable(mtk);
+}
+
+static int xhci_mtk_ofdata_get(struct mtk_xhci *mtk)
+{
+       struct udevice *dev = mtk->dev;
+       int ret = 0;
+
+       mtk->hcd = devfdt_remap_addr_name(dev, "mac");
+       if (!mtk->hcd) {
+               dev_err(dev, "failed to get xHCI base address\n");
+               return -ENXIO;
+       }
+
+       mtk->ippc = devfdt_remap_addr_name(dev, "ippc");
+       if (!mtk->ippc) {
+               dev_err(dev, "failed to get IPPC base address\n");
+               return -ENXIO;
+       }
+
+       dev_info(dev, "hcd: 0x%p, ippc: 0x%p\n", mtk->hcd, mtk->ippc);
+
+       ret = clk_get_bulk(dev, &mtk->clks);
+       if (ret) {
+               dev_err(dev, "failed to get clocks %d!\n", ret);
+               return ret;
+       }
+
+       ret = device_get_supply_regulator(dev, "vusb33-supply",
+                                         &mtk->vusb33_supply);
+       if (ret)
+               debug("can't get vusb33 regulator %d!\n", ret);
+
+       ret = device_get_supply_regulator(dev, "vbus-supply",
+                                         &mtk->vbus_supply);
+       if (ret)
+               debug("can't get vbus regulator %d!\n", ret);
+
+       return 0;
+}
+
+static int xhci_mtk_ldos_enable(struct mtk_xhci *mtk)
+{
+       int ret;
+
+       ret = regulator_set_enable(mtk->vusb33_supply, true);
+       if (ret < 0 && ret != -ENOSYS) {
+               dev_err(mtk->dev, "failed to enable vusb33 %d!\n", ret);
+               return ret;
+       }
+
+       ret = regulator_set_enable(mtk->vbus_supply, true);
+       if (ret < 0 && ret != -ENOSYS) {
+               dev_err(mtk->dev, "failed to enable vbus %d!\n", ret);
+               regulator_set_enable(mtk->vusb33_supply, false);
+               return ret;
+       }
+
+       return 0;
+}
+
+static void xhci_mtk_ldos_disable(struct mtk_xhci *mtk)
+{
+       regulator_set_enable(mtk->vbus_supply, false);
+       regulator_set_enable(mtk->vusb33_supply, false);
+}
+
+static int xhci_mtk_phy_setup(struct mtk_xhci *mtk)
+{
+       struct udevice *dev = mtk->dev;
+       struct phy_bulk *phys = &mtk->phys;
+       int ret;
+
+       ret = generic_phy_get_bulk(dev, phys);
+       if (ret)
+               return ret;
+
+       ret = generic_phy_init_bulk(phys);
+       if (ret)
+               return ret;
+
+       ret = generic_phy_power_on_bulk(phys);
+       if (ret)
+               generic_phy_exit_bulk(phys);
+
+       return ret;
+}
+
+static void xhci_mtk_phy_shutdown(struct mtk_xhci *mtk)
+{
+       generic_phy_power_off_bulk(&mtk->phys);
+       generic_phy_exit_bulk(&mtk->phys);
+}
+
+static int xhci_mtk_probe(struct udevice *dev)
+{
+       struct mtk_xhci *mtk = dev_get_priv(dev);
+       struct xhci_hcor *hcor;
+       int ret;
+
+       mtk->dev = dev;
+       ret = xhci_mtk_ofdata_get(mtk);
+       if (ret)
+               return ret;
+
+       ret = xhci_mtk_ldos_enable(mtk);
+       if (ret)
+               goto ldos_err;
+
+       ret = clk_enable_bulk(&mtk->clks);
+       if (ret)
+               goto clks_err;
+
+       ret = xhci_mtk_phy_setup(mtk);
+       if (ret)
+               goto phys_err;
+
+       ret = xhci_mtk_ssusb_init(mtk);
+       if (ret)
+               goto ssusb_init_err;
+
+       hcor = (struct xhci_hcor *)((uintptr_t)mtk->hcd +
+                       HC_LENGTH(xhci_readl(&mtk->hcd->cr_capbase)));
+
+       return xhci_register(dev, mtk->hcd, hcor);
+
+ssusb_init_err:
+       xhci_mtk_phy_shutdown(mtk);
+phys_err:
+       clk_disable_bulk(&mtk->clks);
+clks_err:
+       xhci_mtk_ldos_disable(mtk);
+ldos_err:
+       return ret;
+}
+
+static int xhci_mtk_remove(struct udevice *dev)
+{
+       struct mtk_xhci *mtk = dev_get_priv(dev);
+
+       xhci_deregister(dev);
+       xhci_mtk_host_disable(mtk);
+       xhci_mtk_ldos_disable(mtk);
+       clk_disable_bulk(&mtk->clks);
+
+       return 0;
+}
+
+static const struct udevice_id xhci_mtk_ids[] = {
+       { .compatible = "mediatek,mtk-xhci" },
+       { }
+};
+
+U_BOOT_DRIVER(usb_xhci) = {
+       .name = "xhci-mtk",
+       .id = UCLASS_USB,
+       .of_match = xhci_mtk_ids,
+       .probe = xhci_mtk_probe,
+       .remove = xhci_mtk_remove,
+       .ops = &xhci_usb_ops,
+       .bind = dm_scan_fdt_dev,
+       .priv_auto_alloc_size = sizeof(struct mtk_xhci),
+       .flags = DM_FLAG_ALLOC_PRIV_DMA,
+};
index 40dee2e6d9bb1d3a2ef7cb01bf0b608e7d6fcaf8..c370eb639428dbce514ad3d719d81f13e8c134a4 100644 (file)
@@ -610,6 +610,16 @@ static int xhci_set_configuration(struct usb_device *udev)
                ep_ctx[ep_index]->tx_info =
                        cpu_to_le32(EP_MAX_ESIT_PAYLOAD_LO(max_esit_payload) |
                        EP_AVG_TRB_LENGTH(avg_trb_len));
+
+               /*
+                * The MediaTek xHCI defines some extra SW parameters which
+                * are put into reserved DWs in Slot and Endpoint Contexts
+                * for synchronous endpoints.
+                */
+               if (IS_ENABLED(CONFIG_USB_XHCI_MTK)) {
+                       ep_ctx[ep_index]->reserved[0] =
+                               cpu_to_le32(EP_BPKTS(1) | EP_BBM(1));
+               }
        }
 
        return xhci_configure_endpoints(udev, false);
index 60175044884937dc8e7ff4bd3b284d52bd54cebd..20e4a21066fbd008eb72bded60d16d20e5f35c93 100644 (file)
@@ -670,6 +670,9 @@ struct xhci_ep_ctx {
 /* deq bitmasks */
 #define EP_CTX_CYCLE_MASK              (1 << 0)
 
+/* reserved[0] bitmasks, MediaTek xHCI used */
+#define EP_BPKTS(p)    (((p) & 0x7f) << 0)
+#define EP_BBM(p)      (((p) & 0x1) << 11)
 
 /**
  * struct xhci_input_control_context