imx: mx6qsabreauto: drop duplicated net phy configuration

In 'commit d584c68ce0f5bf2f430ccfb2ba00bd506206fb91',
ar8031 is changed to use ar8035_config. ar8035_config
actually does the same thing as mx6_rgmii_rework, so
drop mx6_rgmii_rework and board_phy_config.

Signed-off-by: Peng Fan <van.freenix@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Stefano Babic <sbabic@denx.de>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>

diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
index 0712f08c5656710fa4f7388eaaa58a81de3e5e13..d63a979be5899d45c910fb24058e0e2ea95b827f 100644 (file)
--- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c
+++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c
@@ -321,39 +321,6 @@ static void setup_gpmi_nand(void)
 }
 #endif
 
-int mx6_rgmii_rework(struct phy_device *phydev)
-{
-       unsigned short val;
-
-       /* To enable AR8031 ouput a 125MHz clk from CLK_25M */
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x8016);
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4007);
-
-       val = phy_read(phydev, MDIO_DEVAD_NONE, 0xe);
-       val &= 0xffe3;
-       val |= 0x18;
-       phy_write(phydev, MDIO_DEVAD_NONE, 0xe, val);
-
-       /* introduce tx clock delay */
-       phy_write(phydev, MDIO_DEVAD_NONE, 0x1d, 0x5);
-       val = phy_read(phydev, MDIO_DEVAD_NONE, 0x1e);
-       val |= 0x0100;
-       phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, val);
-
-       return 0;
-}
-
-int board_phy_config(struct phy_device *phydev)
-{
-       mx6_rgmii_rework(phydev);
-
-       if (phydev->drv->config)
-               phydev->drv->config(phydev);
-
-       return 0;
-}
-
 static void setup_fec(void)
 {
        if (is_mx6dqp()) {