ARMV7: OMAP: I2C driver: Use same timeout value as linux kernel driver

This patch matches the poll interval (1 millisecond) and timeout (1 second)
used in the linux driver. It also adds a return value of 0 in the event of
a timeout error and cleans up some formatting errors in that section of the
code.

Signed-off-by: Steve Sakoman <steve.sakoman@linaro.org>
Tested-by: Heiko Schocher <hs@denx.de>

diff --git a/drivers/i2c/omap24xx_i2c.c b/drivers/i2c/omap24xx_i2c.c
index 3febd1ff633f8558d19b483f5bb361d47558e8a8..b69d0517509593a21537983f9348dab805eb5491 100644 (file)
--- a/drivers/i2c/omap24xx_i2c.c
+++ b/drivers/i2c/omap24xx_i2c.c
@@ -27,7 +27,7 @@
 
 #include "omap24xx_i2c.h"
 
-#define I2C_TIMEOUT    10
+#define I2C_TIMEOUT    1000
 
 static void wait_for_bb (void);
 static u16 wait_for_pin (void);
@@ -392,13 +392,13 @@ int i2c_write (uchar chip, uint addr, int alen, uchar * buffer, int len)
 
 static void wait_for_bb (void)
 {
-       int timeout = 10;
+       int timeout = I2C_TIMEOUT;
        u16 stat;
 
        writew(0xFFFF, &i2c_base->stat);         /* clear current interruts...*/
        while ((stat = readw (&i2c_base->stat) & I2C_STAT_BB) && timeout--) {
                writew (stat, &i2c_base->stat);
-               udelay (50000);
+               udelay(1000);
        }
 
        if (timeout <= 0) {
@@ -411,7 +411,7 @@ static void wait_for_bb (void)
 static u16 wait_for_pin (void)
 {
        u16 status;
-       int timeout = 10;
+       int timeout = I2C_TIMEOUT;
 
        do {
                udelay (1000);
@@ -424,8 +424,10 @@ static u16 wait_for_pin (void)
        if (timeout <= 0) {
                printf ("timed out in wait_for_pin: I2C_STAT=%x\n",
                        readw (&i2c_base->stat));
-                       writew(0xFFFF, &i2c_base->stat);
-}
+               writew(0xFFFF, &i2c_base->stat);
+               status = 0;
+       }
+
        return status;
 }