edid: Add I2C command for printing the EDID

Add a single command to read the EDID information over I2C.

For example:

SMDK5250 # i2c dev 7
Setting bus to 7
SMDK5250 # i2c edid 50
EDID version: 1.4
Product ID code: 305c
Manufacturer: AUO
Serial number: 00000000
Manufactured in week: 0 year: 2011
Video input definition: digital signal, voltage level 0, blank to black
Monitor is non-RGB
Maximum visible display size: 26 cm x 14 cm
Power management features: no active off, no suspend, no standby
Estabilished timings:
Standard timings:
        1366x768        60 Hz (detailed)
        1366x768        60 Hz (detailed)
Monitor ID: 2VD2K.B116XW

Signed-off-by: Tom Wai-Hong Tam <waihong@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>

diff --git a/README b/README
index 4d9dd57cc342d757ab026a0188acd5a69c8b9019..a80441c9b57f5ce26fe34484bffd7c5e206b81af 100644 (file)
--- a/README
+++ b/README
@@ -1488,6 +1488,11 @@ CBFS (Coreboot Filesystem) support
 
                Support drawing of RLE8-compressed bitmaps on the LCD.
 
+               CONFIG_I2C_EDID
+
+               Enables an 'i2c edid' command which can read EDID
+               information over I2C from an attached LCD display.
+
 
 - Splash Screen Support: CONFIG_SPLASH_SCREEN
 

diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index e7df2e42be053b938ed6173c65b1d2de7f0f0a71..438079447479773abab4b615894a0d69c9a216b4 100644 (file)
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -78,6 +78,7 @@
 
 #include <common.h>
 #include <command.h>
+#include <edid.h>
 #include <environment.h>
 #include <i2c.h>
 #include <malloc.h>
@@ -1340,6 +1341,38 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 }
 #endif
 
+/*
+ * Syntax:
+ *     i2c edid {i2c_chip}
+ */
+#if defined(CONFIG_I2C_EDID)
+int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+       u_char chip;
+       struct edid1_info edid;
+
+       if (argc < 2) {
+               cmd_usage(cmdtp);
+               return 1;
+       }
+
+       chip = simple_strtoul(argv[1], NULL, 16);
+       if (i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)) != 0) {
+               puts("Error reading EDID content.\n");
+               return 1;
+       }
+
+       if (edid_check_info(&edid)) {
+               puts("Content isn't valid EDID.\n");
+               return 1;
+       }
+
+       edid_print_info(&edid);
+       return 0;
+
+}
+#endif /* CONFIG_I2C_EDID */
+
 #if defined(CONFIG_I2C_MUX)
 /**
  * do_i2c_add_bus() - Handle the "i2c bus" command-line command
@@ -1487,6 +1520,9 @@ static cmd_tbl_t cmd_i2c_sub[] = {
 #if defined(CONFIG_I2C_MULTI_BUS)
        U_BOOT_CMD_MKENT(dev, 1, 1, do_i2c_bus_num, "", ""),
 #endif  /* CONFIG_I2C_MULTI_BUS */
+#if defined(CONFIG_I2C_EDID)
+       U_BOOT_CMD_MKENT(edid, 1, 1, do_edid, "", ""),
+#endif  /* CONFIG_I2C_EDID */
        U_BOOT_CMD_MKENT(loop, 3, 1, do_i2c_loop, "", ""),
        U_BOOT_CMD_MKENT(md, 3, 1, do_i2c_md, "", ""),
        U_BOOT_CMD_MKENT(mm, 2, 1, do_i2c_mm, "", ""),
@@ -1547,6 +1583,9 @@ static char i2c_help_text[] =
 #if defined(CONFIG_I2C_MULTI_BUS)
        "i2c dev [dev] - show or set current I2C bus\n"
 #endif  /* CONFIG_I2C_MULTI_BUS */
+#if defined(CONFIG_I2C_EDID)
+       "i2c edid chip - print EDID configuration information\n"
+#endif  /* CONFIG_I2C_EDID */
        "i2c loop chip address[.0, .1, .2] [# of objects] - looping read of device\n"
        "i2c md chip address[.0, .1, .2] [# of objects] - read from I2C device\n"
        "i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"