OMAP3 Turn on the GPIO bank clocks

The function and interface clocks for each GPIO bank, except the first, must
be explicitly turned on.  These are controlled by the config level defines
CONFIG_OMAP3_GPIO_n where n is from 2 to 6.

Signed-off-by: Tom Rix <Tom.Rix@windriver.com>
Acked-by: Dirk Behme <dirk.behme@googlemail.com>

diff --git a/cpu/arm_cortexa8/omap3/clock.c b/cpu/arm_cortexa8/omap3/clock.c
index d035677857f703b213fa79d1fb62790390139bce..0306b6c067e813b42900a822f87400cf39f7aa9a 100644 (file)
--- a/cpu/arm_cortexa8/omap3/clock.c
+++ b/cpu/arm_cortexa8/omap3/clock.c
@@ -357,6 +357,28 @@ void per_clocks_enable(void)
        sr32(&prcm_base->fclken_per, 11, 1, 0x1);
        sr32(&prcm_base->iclken_per, 11, 1, 0x1);
 #endif
+
+#ifdef CONFIG_OMAP3_GPIO_2
+       sr32(&prcm_base->fclken_per, 13, 1, 1);
+       sr32(&prcm_base->iclken_per, 13, 1, 1);
+#endif
+#ifdef CONFIG_OMAP3_GPIO_3
+       sr32(&prcm_base->fclken_per, 14, 1, 1);
+       sr32(&prcm_base->iclken_per, 14, 1, 1);
+#endif
+#ifdef CONFIG_OMAP3_GPIO_4
+       sr32(&prcm_base->fclken_per, 15, 1, 1);
+       sr32(&prcm_base->iclken_per, 15, 1, 1);
+#endif
+#ifdef CONFIG_OMAP3_GPIO_5
+       sr32(&prcm_base->fclken_per, 16, 1, 1);
+       sr32(&prcm_base->iclken_per, 16, 1, 1);
+#endif
+#ifdef CONFIG_OMAP3_GPIO_6
+       sr32(&prcm_base->fclken_per, 17, 1, 1);
+       sr32(&prcm_base->iclken_per, 17, 1, 1);
+#endif
+
 #ifdef CONFIG_DRIVER_OMAP34XX_I2C
        /* Turn on all 3 I2C clocks */
        sr32(&prcm_base->fclken1_core, 15, 3, 0x7);