]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm: ls1021a: Add QSPI or IFC support in SD boot for LS1021AQDS board
authorAlison Wang <b18965@freescale.com>
Tue, 2 Feb 2016 07:16:23 +0000 (15:16 +0800)
committerYork Sun <york.sun@nxp.com>
Wed, 24 Feb 2016 16:40:56 +0000 (08:40 -0800)
As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported
in SD boot now. For the customer's demand, QSPI needs to be supported
in SD boot too.

This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021aqds_sdcard_ifc_defconfig
is used to support IFC in SD boot and ls1021aqds_sdcard_qspi_defconfig
is used to support QSPI in SD boot.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
board/freescale/ls1021aqds/MAINTAINERS
board/freescale/ls1021aqds/ls1021aqds.c
board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg [moved from board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg with 100% similarity]
board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg [new file with mode: 0644]
configs/ls1021aqds_sdcard_ifc_defconfig [moved from configs/ls1021aqds_sdcard_defconfig with 100% similarity]
configs/ls1021aqds_sdcard_qspi_defconfig [new file with mode: 0644]
include/configs/ls1021aqds.h

index 820d3223c230be2c94435c5620445d9936ab16a1..c37ab993eeb04cd4e3653c6a26daa792c1479298 100644 (file)
@@ -8,6 +8,7 @@ F:      configs/ls1021aqds_ddr4_nor_defconfig
 F:     configs/ls1021aqds_ddr4_nor_lpuart_defconfig
 F:     configs/ls1021aqds_nor_SECURE_BOOT_defconfig
 F:     configs/ls1021aqds_nor_lpuart_defconfig
-F:     configs/ls1021aqds_sdcard_defconfig
+F:     configs/ls1021aqds_sdcard_ifc_defconfig
+F:     configs/ls1021aqds_sdcard_qspi_defconfig
 F:     configs/ls1021aqds_qspi_defconfig
 F:     configs/ls1021aqds_nand_defconfig
index 5f4ec9d878f9839a9b2027f97877df20cd59d166..b43b379f5b9786877dc2c70e2936bff64c8949ce 100644 (file)
@@ -61,7 +61,7 @@ enum {
 
 int checkboard(void)
 {
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
        char buf[64];
 #endif
 #if !defined(CONFIG_SD_BOOT) && !defined(CONFIG_QSPI_BOOT)
@@ -90,7 +90,7 @@ int checkboard(void)
                printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
 #endif
 
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
        printf("Sys ID:0x%02x, Sys Ver: 0x%02x\n",
               QIXIS_READ(id), QIXIS_READ(arch));
 
diff --git a/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg b/board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
new file mode 100644 (file)
index 0000000..2bd398c
--- /dev/null
@@ -0,0 +1,14 @@
+#PBL preamble and RCW header
+aa55aa55 01ee0100
+
+#enable IFC, disable QSPI and DSPI
+#0608000a 00000000 00000000 00000000
+#60000000 00407900 60040a00 21046000
+#00000000 00000000 00000000 00038000
+#00000000 001b7200 00000000 00000000
+
+#disable IFC, enable QSPI and DSPI
+0608000a 00000000 00000000 00000000
+60000000 00407900 60040a00 21046000
+00000000 00000000 00000000 00038000
+20024800 001b7200 00000000 00000000
diff --git a/configs/ls1021aqds_sdcard_qspi_defconfig b/configs/ls1021aqds_sdcard_qspi_defconfig
new file mode 100644 (file)
index 0000000..cd75af6
--- /dev/null
@@ -0,0 +1,16 @@
+CONFIG_ARM=y
+CONFIG_TARGET_LS1021AQDS=y
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPL_FSL_PBL,SD_BOOT,SD_BOOT_QSPI"
+CONFIG_DM_SPI=y
+CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
+# CONFIG_CMD_SETEXPR is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_SPANSION=y
+CONFIG_NETDEVICES=y
+CONFIG_E1000=y
+CONFIG_SYS_NS16550=y
+CONFIG_FSL_DSPI=y
+CONFIG_FSL_QSPI=y
index 5bdc124475b4f1b6108feaf3f985844bf98460cc..39d747f55ea26272c7ebd1a82d3a175b68be1488 100644 (file)
@@ -42,7 +42,7 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_CLK_FREQ            100000000
 #define CONFIG_DDR_CLK_FREQ            100000000
 #define CONFIG_QIXIS_I2C_ACCESS
@@ -56,7 +56,13 @@ unsigned long get_board_ddr_clk(void);
 #endif
 
 #ifdef CONFIG_SD_BOOT
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/ls1021aqds/ls102xa_rcw_sd.cfg
+#ifdef CONFIG_SD_BOOT_QSPI
+#define CONFIG_SYS_FSL_PBL_RCW \
+       board/freescale/ls1021aqds/ls102xa_rcw_sd_qspi.cfg
+#else
+#define CONFIG_SYS_FSL_PBL_RCW \
+       board/freescale/ls1021aqds/ls102xa_rcw_sd_ifc.cfg
+#endif
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_LDSCRIPT    "arch/$(ARCH)/cpu/u-boot-spl.lds"
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
@@ -87,6 +93,9 @@ unsigned long get_board_ddr_clk(void);
 
 #ifdef CONFIG_QSPI_BOOT
 #define CONFIG_SYS_TEXT_BASE           0x40010000
+#endif
+
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_NO_FLASH
 #endif
 
@@ -162,7 +171,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * IFC Definitions
  */
-#ifndef CONFIG_QSPI_BOOT
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_IFC
 #define CONFIG_SYS_FLASH_BASE          0x60000000
 #define CONFIG_SYS_FLASH_BASE_PHYS     CONFIG_SYS_FLASH_BASE
@@ -412,7 +421,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_DOS_PARTITION
 
 /* SPI */
-#ifdef CONFIG_QSPI_BOOT
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 /* QSPI */
 #define QSPI0_AMBA_BASE                        0x40000000
 #define FSL_QSPI_FLASH_SIZE            (1 << 24)
@@ -557,6 +566,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_CMDLINE_EDITING
 
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
+#undef CONFIG_CMD_IMLS
+#endif
+
 #define CONFIG_ARMV7_NONSEC
 #define CONFIG_ARMV7_VIRT
 #define CONFIG_PEN_ADDR_BIG_ENDIAN