]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
FSL DDR: Add e500 TLB helper for DDR code
authorKumar Gala <galak@kernel.crashing.org>
Mon, 9 Jun 2008 16:07:46 +0000 (11:07 -0500)
committerKumar Gala <galak@kernel.crashing.org>
Wed, 27 Aug 2008 16:43:48 +0000 (11:43 -0500)
Provide a helper function that board code can call to map TLBs when
setting up DDR.

Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
cpu/mpc85xx/tlb.c
include/asm-ppc/mmu.h

index 3d15d50b85a1f863034b4470235b854defc2cbb0..7ce7a14b849eb02495632661124e2010186d6da0 100644 (file)
@@ -90,3 +90,67 @@ void init_tlbs(void)
 
        return ;
 }
+
+unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg)
+{
+       unsigned int tlb_size;
+       unsigned int ram_tlb_index;
+       unsigned int ram_tlb_address;
+
+       /*
+        * Determine size of each TLB1 entry.
+        */
+       switch (memsize_in_meg) {
+       case 16:
+       case 32:
+               tlb_size = BOOKE_PAGESZ_16M;
+               break;
+       case 64:
+       case 128:
+               tlb_size = BOOKE_PAGESZ_64M;
+               break;
+       case 256:
+       case 512:
+               tlb_size = BOOKE_PAGESZ_256M;
+               break;
+       case 1024:
+       case 2048:
+               if (PVR_VER(get_pvr()) > PVR_VER(PVR_85xx))
+                       tlb_size = BOOKE_PAGESZ_1G;
+               else
+                       tlb_size = BOOKE_PAGESZ_256M;
+               break;
+       default:
+               puts("DDR: only 16M, 32M, 64M, 128M, 256M, 512M, 1G"
+                       " and 2G are supported.\n");
+
+               /*
+                * The memory was not able to be mapped.
+                * Default to a small size.
+                */
+               tlb_size = BOOKE_PAGESZ_64M;
+               memsize_in_meg = 64;
+               break;
+       }
+
+       /*
+        * Configure DDR TLB1 entries.
+        * Starting at TLB1 8, use no more than 8 TLB1 entries.
+        */
+       ram_tlb_index = 8;
+       ram_tlb_address = (unsigned int)CFG_DDR_SDRAM_BASE;
+       while (ram_tlb_address < (memsize_in_meg * 1024 * 1024)
+             && ram_tlb_index < 16) {
+               set_tlb(1, ram_tlb_address, ram_tlb_address,
+                       MAS3_SX|MAS3_SW|MAS3_SR, 0,
+                       0, ram_tlb_index, tlb_size, 1);
+
+               ram_tlb_address += (0x1000 << ((tlb_size - 1) * 2));
+               ram_tlb_index++;
+       }
+
+       /*
+        * Confirm that the requested amount of memory was mapped.
+        */
+       return memsize_in_meg;
+}
index 050a7b6472789c9ddae318d610bd6bde169b808a..8975e6c90a8586e708f2770be77fa48bcf15a525 100644 (file)
@@ -431,6 +431,7 @@ extern void set_tlb(u8 tlb, u32 epn, u64 rpn,
 extern void disable_tlb(u8 esel);
 extern void invalidate_tlb(u8 tlb);
 extern void init_tlbs(void);
+extern unsigned int setup_ddr_tlbs(unsigned int memsize_in_meg);
 
 #define SET_TLB_ENTRY(_tlb, _epn, _rpn, _perms, _wimge, _ts, _esel, _sz, _iprot) \
        { .tlb = _tlb, .epn = _epn, .rpn = _rpn, .perms = _perms, \