board/km/cent2: migrate to environment text file

Use like the other boards a text file for the environment.
As this is the last user of keymile-common.h we can now remove this
file completely.

Signed-off-by: Holger Brunck <holger.brunck@hitachienergy.com>

diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig
index b8f0578a286f9608430d3ae8c4dcecaaef2498c0..46d08971087d4b08a94f06b35995693869afb360 100644 (file)
--- a/board/keymile/Kconfig
+++ b/board/keymile/Kconfig
@@ -77,18 +77,6 @@ config SYS_CLIPS_BASE
        help
          IFC Base Address for CLIPS FPGA.
 
-config KM_CONSOLE_TTY
-       string "KM Console"
-       default "ttyS0"
-       help
-         TTY console to use on board.
-
-config KM_DEF_NETDEV
-       string "Default Netdevice"
-       default "eth0"
-       help
-         Default netdevice for debug interface
-
 config KM_COMMON_ETH_INIT
        bool "Common Ethernet Initialization"
        default y if ARCH_KIRKWOOD || MPC83xx

diff --git a/board/keymile/kmcent2/kmcent2.c b/board/keymile/kmcent2/kmcent2.c
index 9f68c215f38c44b0d2c8bbbbd2cbfc52e1bd487c..ed552c57b5faea4f2e196023bc0b8ebdba588d94 100644 (file)
--- a/board/keymile/kmcent2/kmcent2.c
+++ b/board/keymile/kmcent2/kmcent2.c
@@ -34,7 +34,7 @@ static uchar ivm_content[CONFIG_SYS_IVM_EEPROM_MAX_LEN];
 
 int checkboard(void)
 {
-       printf("Board: Hitachi Power Grids %s\n", KM_BOARD_NAME);
+       printf("Board: Hitachi Power Grids kmcent2\n");
 
        return 0;
 }

diff --git a/board/keymile/kmcent2/kmcent2.env b/board/keymile/kmcent2/kmcent2.env
new file mode 100644 (file)
index 0000000..7c8f830
--- /dev/null
+++ b/board/keymile/kmcent2/kmcent2.env
@@ -0,0 +1,37 @@
+#include <environment/pg-wcom/common.env>
+
+EEprom_ivm=pca9547:70:9
+arch=ppc_82xx
+boot=bootm ${load_addr_r} - ${fdt_addr_r}
+checkfdt=true
+cramfsloadfdt=cramfsload ${fdt_addr_r} fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb
+fpgacfg=true
+hostname=kmcent2
+hwconfig=fsl_ddr:ctlr_intlv=cacheline
+netdev=eth2
+
+newenv=protect off ENV_DEL_ADDR +CONFIG_ENV_TOTAL_SIZE  &&
+       erase ENV_DEL_ADDR +CONFIG_ENV_TOTAL_SIZE &&
+       protect on ENV_DEL_ADDR +CONFIG_ENV_TOTAL_SIZE
+
+set_fdthigh=true
+uimage=uImage
+
+update=protect off CONFIG_SYS_MONITOR_BASE +${filesize} &&
+       erase CONFIG_SYS_MONITOR_BASE +${filesize} &&
+       cp.b ${load_addr_r} CONFIG_SYS_MONITOR_BASE ${filesize} &&
+       protect on CONFIG_SYS_MONITOR_BASE +${filesize}
+       update-nor=protect off CONFIG_SYS_FLASH_BASE +${filesize} &&
+       erase CONFIG_SYS_FLASH_BASE +${filesize} &&
+       cp.b ${load_addr_r} CONFIG_SYS_FLASH_BASE ${filesize} &&
+       protect on CONFIG_SYS_MONITOR_BASE +CONFIG_SYS_MONITOR_LEN
+
+usb_phy_type=utmi
+usb_dr_mode=host
+
+/*
+ * The Linux fsl_fman driver needs to be able to process frames with more
+ * than just the VLAN tag (i.e. eDSA tag). It is passed as a kernel boot
+ * parameters
+ */
+add_default+= fsl_dpaa_fman.fsl_fm_max_frm=1558

diff --git a/configs/kmcent2_defconfig b/configs/kmcent2_defconfig
index 41b26287d567e429fa6696bf363ff02edbd4be8c..2abda78893990e0adeed8c8d38e482957ff24c13 100644 (file)
--- a/configs/kmcent2_defconfig
+++ b/configs/kmcent2_defconfig
@@ -17,7 +17,6 @@ CONFIG_SYS_CACHE_STASHING=y
 # CONFIG_DEEP_SLEEP is not set
 CONFIG_PCIE1=y
 CONFIG_SYS_FSL_NUM_CC_PLLS=2
-CONFIG_KM_DEF_NETDEV="eth2"
 CONFIG_KM_IVM_BUS=2
 CONFIG_SYS_MONITOR_LEN=786432
 CONFIG_MP=y
@@ -54,6 +53,7 @@ CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:128k(RCW),128k(fman),128k(QE),12
 CONFIG_CMD_UBI=y
 # CONFIG_CMD_UBIFS is not set
 CONFIG_OF_CONTROL=y
+CONFIG_ENV_SOURCE_FILE="kmcent2"
 CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_SYS_REDUNDAND_ENVIRONMENT=y

diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h
deleted file mode 100644 (file)
index cc5ec21..0000000
--- a/include/configs/km/keymile-common.h
+++ /dev/null
@@ -1,174 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * (C) Copyright 2008-2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- */
-
-#ifndef __CONFIG_KEYMILE_H
-#define __CONFIG_KEYMILE_H
-
-#include <linux/stringify.h>
-
-/*
- * Miscellaneous configurable options
- */
-
-#define CFG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
-
-#ifndef CONFIG_KM_DEF_ENV_BOOTPARAMS
-#define CONFIG_KM_DEF_ENV_BOOTPARAMS \
-       "actual_bank=0\0"
-#endif
-
-#ifndef CONFIG_KM_UBI_PARTITION_NAME_BOOT
-#define CONFIG_KM_UBI_PARTITION_NAME_BOOT      "ubi0"
-#endif /* CONFIG_KM_UBI_PARTITION_NAME_BOOT */
-
-#ifndef CONFIG_KM_UBI_PART_BOOT_OPTS
-#define CONFIG_KM_UBI_PART_BOOT_OPTS           ""
-#endif /* CONFIG_KM_UBI_PART_BOOT_OPTS */
-
-#ifndef CONFIG_KM_UBI_PARTITION_NAME_APP
-/* one flash chip only called boot */
-/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
-# define CONFIG_KM_UBI_LINUX_MTD                                       \
-       "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT                    \
-       CONFIG_KM_UBI_PART_BOOT_OPTS
-# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI                              \
-       "ubiattach=ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "\0"
-#else /* CONFIG_KM_UBI_PARTITION_NAME_APP */
-/* two flash chips called boot and app */
-/* boot: CONFIG_KM_UBI_PARTITION_NAME_BOOT */
-/* app:  CONFIG_KM_UBI_PARTITION_NAME_APP */
-# define CONFIG_KM_UBI_LINUX_MTD                                       \
-       "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_BOOT                    \
-       CONFIG_KM_UBI_PART_BOOT_OPTS " "                                \
-       "ubi.mtd=" CONFIG_KM_UBI_PARTITION_NAME_APP
-# define CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI                              \
-       "ubiattach=if test ${boot_bank} -eq 0; then; "                  \
-       "ubi part " CONFIG_KM_UBI_PARTITION_NAME_BOOT "; else; "        \
-       "ubi part " CONFIG_KM_UBI_PARTITION_NAME_APP "; fi\0"
-#endif /* CONFIG_KM_UBI_PARTITION_NAME_APP */
-
-#ifdef CONFIG_NAND_ECC_BCH
-#define CONFIG_KM_UIMAGE_NAME "ecc_bch_uImage\0"
-#define CONFIG_KM_ECC_MODE    " eccmode=bch"
-#else
-#define CONFIG_KM_UIMAGE_NAME "uImage\0"
-#define CONFIG_KM_ECC_MODE
-#endif
-
-/*
- * boottargets
- * - set 'subbootcmds'
- * - set 'bootcmd' and 'altbootcmd'
- * available targets:
- * - 'release': for a standalone system                kernel/rootfs from flash
- */
-#define CONFIG_KM_DEF_ENV_BOOTTARGETS                                  \
-       "subbootcmds=ubiattach ubicopy checkfdt cramfsloadfdt "         \
-               "set_fdthigh cramfsloadkernel flashargs add_default "   \
-               "addpanic boot\0"                                       \
-       "develop="                                                      \
-               "tftp ${load_addr_r} scripts/develop-${arch}.txt && "   \
-               "env import -t ${load_addr_r} ${filesize} && "          \
-               "run setup_debug_env\0"                                 \
-       "ramfs="                                                        \
-               "tftp ${load_addr_r} scripts/ramfs-${arch}.txt && "     \
-               "env import -t ${load_addr_r} ${filesize} && "          \
-               "run setup_debug_env\0"                                 \
-       ""
-
-/*
- * bootargs
- * - modify 'bootargs'
- *
- * - 'add_default': default bootargs common for all arm/ppc boards
- * - 'addpanic': add kernel panic options
- * - 'flashargs': defaults arguments for flash base boot
- *
- */
-#define CONFIG_KM_DEF_ENV_BOOTARGS                                     \
-       "add_default="                                                  \
-               "setenv bootargs ${bootargs} "                          \
-               "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
-               ":${hostname}:${netdev}:off:"                           \
-               " console=" CONFIG_KM_CONSOLE_TTY ",${baudrate}"        \
-               " mem=${kernelmem} init=${init}"                        \
-               CONFIG_KM_ECC_MODE                                      \
-               " phram.phram=phvar,${varaddr}," __stringify(CONFIG_KM_PHRAM)\
-               " " CONFIG_KM_UBI_LINUX_MTD " "                         \
-               CONFIG_KM_DEF_BOOT_ARGS_CPU                             \
-               "\0"                                                    \
-       "addpanic="                                                     \
-               "setenv bootargs ${bootargs} panic=1 panic_on_oops=1\0" \
-       "flashargs="                                                    \
-               "setenv bootargs "                                      \
-               "root=mtdblock:rootfs${boot_bank} "                     \
-               "rootfstype=squashfs ro\0"                              \
-       ""
-
-/*
- * flash_boot
- * - commands for booting from flash
- *
- * - 'cramfsloadkernel': copy kernel from a cramfs to ram
- * - 'ubiattach': attach ubi partition
- * - 'ubicopy': copy ubi volume to ram
- *              - volume names: bootfs0, bootfs1, bootfs2, ...
- *
- * processor specific settings
- * - 'cramfsloadfdt': copy fdt from a cramfs to ram
- */
-#define CONFIG_KM_DEF_ENV_FLASH_BOOT                                   \
-       "cramfsaddr=" __stringify(CONFIG_KM_CRAMFS_ADDR) "\0"           \
-       "cramfsloadkernel=cramfsload ${load_addr_r} ${uimage}\0"        \
-       "ubicopy=ubi read ${cramfsaddr} bootfs${boot_bank}\0"           \
-       "uimage=" CONFIG_KM_UIMAGE_NAME                                 \
-       CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
-
-/*
- * constants
- * - KM specific constants and commands
- *
- * - 'default': setup default environment
- */
-#define CONFIG_KM_DEF_ENV_CONSTANTS                                    \
-       "backup_bank=0\0"                                               \
-       "release=run newenv; reset\0"                                   \
-       "pnvramsize=" __stringify(CONFIG_KM_PNVRAM) "\0"                \
-       "testbootcmd=setenv boot_bank ${test_bank}; "                   \
-               "run ${subbootcmds}; reset\0"                           \
-       "env_version=1\0"                                               \
-       ""
-
-#ifndef CONFIG_KM_DEF_ENV
-#define CONFIG_KM_DEF_ENV      \
-       CONFIG_KM_DEF_ENV_BOOTPARAMS                                    \
-       "netdev=" __stringify(CONFIG_KM_DEF_NETDEV) "\0"                \
-       CONFIG_KM_DEF_ENV_CPU                                           \
-       CONFIG_KM_DEF_ENV_BOOTTARGETS                                   \
-       CONFIG_KM_DEF_ENV_BOOTARGS                                      \
-       CONFIG_KM_DEF_ENV_FLASH_BOOT                                    \
-       CONFIG_KM_DEF_ENV_CONSTANTS                                     \
-       "altbootcmd=run bootcmd\0"                                      \
-       "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"                   \
-       "bootcmd=km_checkbidhwk &&  "                                   \
-               "setenv bootcmd \'if km_checktestboot; then; "          \
-                               "setenv boot_bank ${test_bank}; else; " \
-                               "setenv boot_bank ${actual_bank}; fi;"  \
-                       "run ${subbootcmds}; reset\' && "               \
-               "setenv altbootcmd \'setenv boot_bank ${backup_bank}; " \
-                       "run ${subbootcmds}; reset\' && "               \
-               "saveenv && saveenv && boot\0"                          \
-       "cramfsloadfdt="                                                \
-               "cramfsload ${fdt_addr_r} "                             \
-               "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
-       "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0"              \
-       "init=/sbin/init-overlay.sh\0"                                  \
-       "load_addr_r=" __stringify(CONFIG_KM_KERNEL_ADDR) "\0"          \
-       "load=tftpboot ${load_addr_r} ${u-boot}\0"                      \
-       ""
-#endif /* CONFIG_KM_DEF_ENV */
-
-#endif /* __CONFIG_KEYMILE_H */

diff --git a/include/configs/kmcent2.h b/include/configs/kmcent2.h
index 527f0383bc6532c54ac38cfb2dd4c91e69d84016..532370e9184f9484d24cb42eea68267484d6cec1 100644 (file)
--- a/include/configs/kmcent2.h
+++ b/include/configs/kmcent2.h
@@ -8,18 +8,6 @@
 #ifndef __KMCENT2_H
 #define __KMCENT2_H
 
-#define CONFIG_HOSTNAME                "kmcent2"
-#define KM_BOARD_NAME  CONFIG_HOSTNAME
-
-/*
- * The Linux fsl_fman driver needs to be able to process frames with more
- * than just the VLAN tag (i.e. eDSA tag). It is passed as a kernel boot
- * parameters
- */
-#define CONFIG_KM_DEF_BOOT_ARGS_CPU    "fsl_dpaa_fman.fsl_fm_max_frm=1558"
-
-#include "km/keymile-common.h"
-
 /* Application IFC chip selects */
 #define SYS_LAWAPP_BASE                0xc0000000
 #define SYS_LAWAPP_BASE_PHYS   (0xf00000000ull | SYS_LAWAPP_BASE)
@@ -387,66 +375,4 @@ int get_scl(void);
  */
 #define CFG_SYS_BOOTMAPSZ      (64 << 20)      /* Initial map for Linux*/
 
-/*
- * Environment Configuration
- */
-#ifndef CONFIG_KM_DEF_ENV              /* if not set by keymile-common.h */
-#define CONFIG_KM_DEF_ENV
-#endif
-
-#define __USB_PHY_TYPE utmi
-
-#define CONFIG_KM_DEF_ENV_CPU                                          \
-       "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0"                   \
-       "cramfsloadfdt="                                                \
-               "cramfsload ${fdt_addr_r} "                             \
-               "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0"             \
-       "u-boot=" CONFIG_HOSTNAME "/u-boot.bin\0"               \
-       "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
-               " +${filesize} && "                                     \
-               "erase " __stringify(CONFIG_SYS_MONITOR_BASE)           \
-               " +${filesize} && "                                     \
-               "cp.b ${load_addr_r} "                                  \
-               __stringify(CONFIG_SYS_MONITOR_BASE) " ${filesize} && " \
-               "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
-               " +${filesize}\0"                                       \
-       "update-nor=protect off " __stringify(CFG_SYS_FLASH_BASE)       \
-               " +${filesize} && "                                     \
-               "erase " __stringify(CFG_SYS_FLASH_BASE)                \
-               " +${filesize} && "                                     \
-               "cp.b ${load_addr_r} "                                  \
-               __stringify(CFG_SYS_FLASH_BASE) " ${filesize} && "      \
-               "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
-               " +" __stringify(CONFIG_SYS_MONITOR_LEN) "\0"           \
-       "set_fdthigh=true\0"                                            \
-       "checkfdt=true\0"                                               \
-       "fpgacfg=true\0"                                                \
-       ""
-
-#define CONFIG_HW_ENV_SETTINGS                                         \
-       "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0"                       \
-       "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0"                \
-       "usb_dr_mode=host\0"
-
-#define CONFIG_KM_NEW_ENV                                              \
-       "newenv=protect off " __stringify(ENV_DEL_ADDR)                 \
-               " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "          \
-               "erase " __stringify(ENV_DEL_ADDR)                      \
-               " +" __stringify(CONFIG_ENV_TOTAL_SIZE) " && "          \
-               "protect on " __stringify(ENV_DEL_ADDR)                 \
-               " +" __stringify(CONFIG_ENV_TOTAL_SIZE) "\0"
-
-/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */
-#ifndef CONFIG_KM_DEF_ARCH
-#define CONFIG_KM_DEF_ARCH     "arch=ppc_82xx\0"
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS                                      \
-       CONFIG_KM_DEF_ENV                                               \
-       CONFIG_KM_DEF_ARCH                                              \
-       CONFIG_KM_NEW_ENV                                               \
-       CONFIG_HW_ENV_SETTINGS                                          \
-       "EEprom_ivm=pca9547:70:9\0"                                     \
-       ""
-
 #endif /* __KMCENT2_H */

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 12c23a5dfdf2b27bab5a89cf50057b7e0a137abb..f829a7927db4e1f6f53dab97d829cfeb8810957c 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -70,23 +70,8 @@ CONFIG_IRAM_BASE
 CONFIG_IRAM_END
 CONFIG_IRAM_SIZE
 CONFIG_IRAM_TOP
-CONFIG_KM_DEF_ARCH
-CONFIG_KM_DEF_BOOT_ARGS_CPU
-CONFIG_KM_DEF_ENV
-CONFIG_KM_DEF_ENV_BOOTARGS
-CONFIG_KM_DEF_ENV_BOOTPARAMS
 CONFIG_KM_DEF_ENV_BOOTTARGETS
-CONFIG_KM_DEF_ENV_CONSTANTS
-CONFIG_KM_DEF_ENV_CPU
-CONFIG_KM_DEF_ENV_FLASH_BOOT
-CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI
-CONFIG_KM_ECC_MODE
 CONFIG_KM_NEW_ENV
-CONFIG_KM_UBI_LINUX_MTD
-CONFIG_KM_UBI_PARTITION_NAME_APP
-CONFIG_KM_UBI_PARTITION_NAME_BOOT
-CONFIG_KM_UBI_PART_BOOT_OPTS
-CONFIG_KM_UIMAGE_NAME
 CONFIG_KSNET_CPSW_NUM_PORTS
 CONFIG_KSNET_MAC_ID_BASE
 CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE