mmc: renesas-sdhi: Filter out HS400 on M3-W r1.2, V3M, V3H r1.x, D3

Further filter out HS400 support on certain SoCs.

Since M3-W r1.2 does not support HS400, drop the calibration table and
rename the one for M3-W r1.3 to r8a7796_rev13_calib_table

Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Hai Pham <hai.pham.ud@renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>

diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c
index 9f8a272d03d70267de8443be141e382d4f9f2505..3ec0444700e9ad676e49f256743b283cb4f4ad0b 100644 (file)
--- a/drivers/mmc/renesas-sdhi.c
+++ b/drivers/mmc/renesas-sdhi.c
@@ -78,14 +78,7 @@ static const u8 r8a7795_calib_table[2][CALIB_TABLE_MAX] = {
         16, 16, 17, 17, 17, 17, 17, 18, 18, 18, 18, 19, 20, 21, 22, 22 }
 };
 
-static const u8 r8a7796_rev1_calib_table[2][CALIB_TABLE_MAX] = {
-       { 0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,  1,  2,  3,  4,  9,
-        15, 15, 15, 16, 16, 16, 16, 16, 17, 18, 19, 20, 21, 21, 22, 22 },
-       { 0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  0,  1,
-         2,  9, 16, 17, 17, 17, 18, 18, 18, 18, 19, 20, 21, 22, 23, 24}
-};
-
-static const u8 r8a7796_rev3_calib_table[2][CALIB_TABLE_MAX] = {
+static const u8 r8a7796_rev13_calib_table[2][CALIB_TABLE_MAX] = {
        { 0,  0,  0,  0,  2,  3,  4,  4,  5,  6,  7,  7,  8,  9,  9, 10,
         11, 12, 13, 15, 16, 17, 17, 18, 19, 19, 20, 21, 21, 22, 23, 23 },
        { 1,  2,  2,  3,  4,  4,  5,  6,  6,  7,  8,  9,  9, 10, 11, 12,
@@ -871,12 +864,16 @@ static void renesas_sdhi_filter_caps(struct udevice *dev)
     CONFIG_IS_ENABLED(MMC_HS400_SUPPORT)
        struct tmio_sd_plat *plat = dev_get_plat(dev);
 
-       /* HS400 is not supported on H3 ES1.x and M3W ES1.0, ES1.1 */
+       /* HS400 is not supported on H3 ES1.x, M3W ES1.[012], V3M, V3H ES1.x, D3 */
        if (((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7795) &&
            (rmobile_get_cpu_rev_integer() <= 1)) ||
            ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
            (rmobile_get_cpu_rev_integer() == 1) &&
-           (rmobile_get_cpu_rev_fraction() < 2)))
+           (rmobile_get_cpu_rev_fraction() <= 2)) ||
+           (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77970) ||
+           ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77980) &&
+           (rmobile_get_cpu_rev_integer() <= 1)) ||
+           (rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A77995))
                plat->cfg.host_caps &= ~MMC_MODE_HS400;
 
        /* H3 ES2.0, ES3.0 and M3W ES1.2 and M3N bad taps */
@@ -897,16 +894,6 @@ static void renesas_sdhi_filter_caps(struct udevice *dev)
                        r8a7795_calib_table[!rmobile_is_gen3_mmc0(priv)];
        }
 
-       /* M3W ES1.2 can use HS400 with manual adjustment */
-       if ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
-           (rmobile_get_cpu_rev_integer() == 1) &&
-           (rmobile_get_cpu_rev_fraction() == 2)) {
-               priv->adjust_hs400_enable = true;
-               priv->adjust_hs400_offset = 3;
-               priv->adjust_hs400_calib_table =
-                       r8a7796_rev1_calib_table[!rmobile_is_gen3_mmc0(priv)];
-       }
-
        /* M3W ES1.x for x>2 can use HS400 with manual adjustment and taps */
        if ((rmobile_get_cpu_type() == RMOBILE_CPU_TYPE_R8A7796) &&
            (rmobile_get_cpu_rev_integer() == 1) &&
@@ -915,7 +902,7 @@ static void renesas_sdhi_filter_caps(struct udevice *dev)
                priv->adjust_hs400_offset = 0;
                priv->hs400_bad_tap = BIT(1) | BIT(3) | BIT(5) | BIT(7);
                priv->adjust_hs400_calib_table =
-                       r8a7796_rev3_calib_table[!rmobile_is_gen3_mmc0(priv)];
+                       r8a7796_rev13_calib_table[!rmobile_is_gen3_mmc0(priv)];
        }
 
        /* M3N can use HS400 with manual adjustment */