--- /dev/null
+/*
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fec.h>
+#include <asm/immap.h>
+
+#include <config.h>
+#include <net.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
+#undef MII_DEBUG
+#undef ET_DEBUG
+
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+ if (setclear) {
+ /* Enable Ethernet pins */
+ mbar_writeByte(MCF_GPIO_PAR_FECI2C, CFG_FECI2C);
+ } else {
+ }
+
+ return 0;
+}
+
+#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
+#include <miiphy.h>
+
+/* Make MII read/write commands for the FEC. */
+#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
+
+#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
+
+/* PHY identification */
+#define PHY_ID_LXT970 0x78100000 /* LXT970 */
+#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */
+#define PHY_ID_82555 0x02a80150 /* Intel 82555 */
+#define PHY_ID_QS6612 0x01814400 /* QS6612 */
+#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */
+#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */
+#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */
+#define PHY_ID_DP83848VV 0x20005C90 /* National 83848 */
+#define PHY_ID_DP83849 0x20005CA2 /* National 82849 */
+#define PHY_ID_KS8721BL 0x00221619 /* Micrel KS8721BL/SL */
+
+#define STR_ID_LXT970 "LXT970"
+#define STR_ID_LXT971 "LXT971"
+#define STR_ID_82555 "Intel82555"
+#define STR_ID_QS6612 "QS6612"
+#define STR_ID_AMD79C784 "AMD79C784"
+#define STR_ID_LSI80225 "LSI80225"
+#define STR_ID_LSI80225B "LSI80225/B"
+#define STR_ID_DP83848VV "N83848"
+#define STR_ID_DP83849 "N83849"
+#define STR_ID_KS8721BL "KS8721BL"
+
+/****************************************************************************
+ * mii_init -- Initialize the MII for MII command without ethernet
+ * This function is a subset of eth_init
+ ****************************************************************************
+ */
+void mii_reset(struct fec_info_s *info)
+{
+ volatile fec_t *fecp = (fec_t *) (info->miibase);
+ int i;
+
+ fecp->ecr = FEC_ECR_RESET;
+ for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
+ udelay(1);
+ }
+ if (i == FEC_RESET_DELAY) {
+ printf("FEC_RESET_DELAY timeout\n");
+ }
+}
+
+/* send command to phy using mii, wait for result */
+uint mii_send(uint mii_cmd)
+{
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ volatile fec_t *ep;
+ uint mii_reply;
+ int j = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ ep = (fec_t *) info->miibase;
+
+ ep->mmfr = mii_cmd; /* command to phy */
+
+ /* wait for mii complete */
+ while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
+ udelay(1);
+ j++;
+ }
+ if (j >= MCFFEC_TOUT_LOOP) {
+ printf("MII not complete\n");
+ return -1;
+ }
+
+ mii_reply = ep->mmfr; /* result from phy */
+ ep->eir = FEC_EIR_MII; /* clear MII complete */
+#ifdef ET_DEBUG
+ printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
+ __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
+#endif
+
+ return (mii_reply & 0xffff); /* data read from phy */
+}
+#endif /* CFG_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
+
+#if defined(CFG_DISCOVER_PHY)
+int mii_discover_phy(struct eth_device *dev)
+{
+#define MAX_PHY_PASSES 11
+ struct fec_info_s *info = dev->priv;
+ int phyaddr, pass;
+ uint phyno, phytype;
+
+ if (info->phyname_init)
+ return info->phy_addr;
+
+ phyaddr = -1; /* didn't find a PHY yet */
+ for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
+ if (pass > 1) {
+ /* PHY may need more time to recover from reset.
+ * The LXT970 needs 50ms typical, no maximum is
+ * specified, so wait 10ms before try again.
+ * With 11 passes this gives it 100ms to wake up.
+ */
+ udelay(10000); /* wait 10ms */
+ }
+
+ for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
+
+ phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
+#ifdef ET_DEBUG
+ printf("PHY type 0x%x pass %d type\n", phytype, pass);
+#endif
+ if (phytype != 0xffff) {
+ phyaddr = phyno;
+ phytype <<= 16;
+ phytype |=
+ mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
+
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_KS8721BL:
+ strcpy(info->phy_name,
+ STR_ID_KS8721BL);
+ info->phyname_init = 1;
+ break;
+ default:
+ strcpy(info->phy_name, "unknown");
+ info->phyname_init = 1;
+ break;
+ }
+
+#ifdef ET_DEBUG
+ printf("PHY @ 0x%x pass %d type ", phyno, pass);
+ switch (phytype & 0xffffffff) {
+ case PHY_ID_KS8721BL:
+ printf(STR_ID_KS8721BL);
+ break;
+ default:
+ printf("0x%08x\n", phytype);
+ break;
+ }
+#endif
+ }
+ }
+ }
+ if (phyaddr < 0)
+ printf("No PHY device found.\n");
+
+ return phyaddr;
+}
+#endif /* CFG_DISCOVER_PHY */
+
+int mii_init(void) __attribute__((weak,alias("__mii_init")));
+
+void __mii_init(void)
+{
+ volatile fec_t *fecp;
+ struct fec_info_s *info;
+ struct eth_device *dev;
+ int miispd = 0, i = 0;
+ u16 autoneg = 0;
+
+ /* retrieve from register structure */
+ dev = eth_get_dev();
+ info = dev->priv;
+
+ fecp = (fec_t *) info->miibase;
+
+ fecpin_setclear(dev, 1);
+
+ mii_reset(info);
+
+ /* We use strictly polling mode only */
+ fecp->eimr = 0;
+
+ /* Clear any pending interrupt */
+ fecp->eir = 0xffffffff;
+
+ /* Set MII speed */
+ miispd = (gd->bus_clk / 1000000) / 5;
+ fecp->mscr = miispd << 1;
+
+ info->phy_addr = mii_discover_phy(dev);
+
+#define AUTONEGLINK (PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
+ while (i < MCFFEC_TOUT_LOOP) {
+ autoneg = 0;
+ miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
+ i++;
+
+ if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
+ break;
+
+ udelay(500);
+ }
+ if (i >= MCFFEC_TOUT_LOOP) {
+ printf("Auto Negotiation not complete\n");
+ }
+
+ /* adapt to the half/full speed settings */
+ info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
+ info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
+}
+
+/*****************************************************************************
+ * Read and write a MII PHY register, routines used by MII Utilities
+ *
+ * FIXME: These routines are expected to return 0 on success, but mii_send
+ * does _not_ return an error code. Maybe 0xFFFF means error, i.e.
+ * no PHY connected...
+ * For now always return 0.
+ * FIXME: These routines only work after calling eth_init() at least once!
+ * Otherwise they hang in mii_send() !!! Sorry!
+ *****************************************************************************/
+
+int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short *value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
+#endif
+ rdreg = mii_send(mk_mii_read(addr, reg));
+
+ *value = rdreg;
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", *value);
+#endif
+
+ return 0;
+}
+
+int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
+ unsigned short value)
+{
+ short rdreg; /* register working value */
+
+#ifdef MII_DEBUG
+ printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
+#endif
+
+ rdreg = mii_send(mk_mii_write(addr, reg, value));
+
+#ifdef MII_DEBUG
+ printf("0x%04x\n", value);
+#endif
+
+ return 0;
+}
+
+#endif /* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
*/
#define CONFIG_BOOTCOMMAND "run net_nfs"
#define CONFIG_BOOTDELAY 5
+#define CONFIG_MCFUART
+#define CFG_UART_PORT (0)
#define CONFIG_BAUDRATE 19200
#define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 }
#define CONFIG_ETHADDR 00:06:3b:01:41:55
#define CONFIG_PREBOOT "echo;echo Type \"run flash_nfs\" to mount root " \
"filesystem over NFS; echo"
+#define CONFIG_MCFTMR
+
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"ramargs=setenv bootargs root=/dev/ram rw\0" \
/*
* Ethernet
*/
-#define FEC_ENET
-#define CONFIG_NET_RETRY_COUNT 5
-#define CFG_ENET_BD_BASE 0x480000
-#define CFG_DISCOVER_PHY 1
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+# define CONFIG_NET_MULTI 1
#define CONFIG_MII 1
+# define CFG_DISCOVER_PHY
+# define CFG_RX_ETH_BUFFER 8
+# define CFG_FAULT_ECHO_LINK_DOWN
+
+# define CFG_FEC0_PINMUX 0
+# define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE
+# define MCFFEC_TOUT_LOOP 50000
+/* If CFG_DISCOVER_PHY is not defined - hardcoded */
+# ifndef CFG_DISCOVER_PHY
+# define FECDUPLEX FULL
+# define FECSPEED _100BASET
+# else
+# ifndef CFG_FAULT_ECHO_LINK_DOWN
+# define CFG_FAULT_ECHO_LINK_DOWN
+# endif
+# endif /* CFG_DISCOVER_PHY */
+#endif
/*
* Definitions for initial stack pointer and data area (in DPRAM)
* have to be in the first 8 MB of memory, since this is
* the maximum mapped by the Linux kernel during initialization ??
*/
-#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+#define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20))
/* FLASH organization */
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
"2m(rootfs)," \
"-(user)";
-#if defined(CONFIG_CMD_MII)
+#if (CONFIG_COMMANDS & CFG_CMD_MII)
#error MII commands don't work on iDMR board and sholud not be enabled.
-#endif
+#endif /* (CONFIG_COMMANDS & CFG_CMD_MII) */
#endif /* _IDMR_H */
projects / u-boot.git / commitdiff