Changes since U-Boot 1.1.1:
======================================================================
+* Patch by Mark Jonas, 01 Jul 2004:
+ Added support for Total5100 and Total5200 (Rev.1 and Rev.2)
+ MGT5100 and MPC5200 based Freescale platforms.
+
* Patch by Philippe Robin, 01 Jul 2004:
Add initialization for Integrator and versatile board files.
E: yooth@ipone.co.kr
D: Added port to the RPXlite board
+N: Mark Jonas
+E: mark.jonas@freescale.com
+D: Support for Freescale Total5200 platform
+W: http://www.mobilegt.com/
+
N: Sam Song
E: samsongshu@yahoo.com.cn
D: Port to the RPXlite_DW board
LIST_5xxx=" \
icecube_5100 icecube_5200 EVAL5200 PM520 \
- TQM5200_AA \
+ Total5100 Total5200 Total5200_Rev2 TQM5200_AA \
"
#########################################################################
@ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
@./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+Total5100_config \
+Total5200_config \
+Total5200_lowboot_config \
+Total5200_Rev2_config \
+Total5200_Rev2_lowboot_config: unconfig
+ @ >include/config.h
+ @[ -z "$(findstring 5100,$@)" ] || \
+ { echo "#define CONFIG_MGT5100" >>include/config.h ; \
+ echo "... with MGT5100 processor" ; \
+ }
+ @[ -z "$(findstring 5200,$@)" ] || \
+ { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ echo "... with MPC5200 processor" ; \
+ }
+ @[ -n "$(findstring Rev,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 1" >>include/config.h ; \
+ echo "... revision 1 board" ; \
+ }
+ @[ -z "$(findstring Rev2_,$@)" ] || \
+ { echo "#define CONFIG_TOTAL5200_REV 2" >>include/config.h ; \
+ echo "... revision 2 board" ; \
+ }
+ @[ -z "$(findstring lowboot_,$@)" ] || \
+ { echo "TEXT_BASE = 0xFE000000" >board/total5200/config.tmp ; \
+ echo "... with lowboot configuration" ; \
+ }
+ @./mkconfig -a Total5200 ppc mpc5xxx total5200
+
PM520_config \
PM520_DDR_config \
PM520_ROMBOOT_config \
--- /dev/null
+#
+# (C) Copyright 2003-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS := $(BOARD).o sdram.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2003-2004
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Total5200 board:
+#
+# Valid values for TEXT_BASE are:
+#
+# 0xFFF00000 boot high (standard configuration)
+# 0xFE000000 boot low
+# 0x00100000 boot from RAM (for testing only)
+#
+
+sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+## Standard: boot high
+TEXT_BASE = 0xFFF00000
+## For testing: boot from RAM
+# TEXT_BASE = 0x00100000
+endif
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#define SDRAM_DDR 0 /* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x00CD0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xD2322800
+#define SDRAM_CONFIG2 0x8AD70000
+
+#elif defined(CONFIG_MGT5100)
+/* Settings for XLB = 66 MHz */
+#define SDRAM_MODE 0x008D0000
+#define SDRAM_CONTROL 0x504F0000
+#define SDRAM_CONFIG1 0xC2222600
+#define SDRAM_CONFIG2 0x88B70004
+#define SDRAM_ADDRSEL 0x02000000
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Micron MT48LC32M16A2-75 is compatible to:
+ * - Infineon HYB39S512160AT-75
+ */
+
+#define SDRAM_DDR 0 /* is SDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x00CD0000
+#define SDRAM_CONTROL 0x514F0000
+#define SDRAM_CONFIG1 0xD2322800
+#define SDRAM_CONFIG2 0x8AD70000
+
+#else
+#error CONFIG_MPC5200 is not defined
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+
+#include "sdram.h"
+
+#ifndef CFG_RAMBOOT
+static void mpc5xxx_sdram_start (sdram_conf_t *sdram_conf, int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+
+ /* unlock mode register */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000000 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ if (sdram_conf->ddr) {
+ /* set mode register: extended mode */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->emode;
+ __asm__ volatile ("sync");
+
+ /* set mode register: reset DLL */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode | 0x04000000;
+ __asm__ volatile ("sync");
+ }
+
+ /* precharge all banks */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000002 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* auto refresh */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | 0x80000004 | hi_addr_bit;
+ __asm__ volatile ("sync");
+
+ /* set mode register */
+ *(vu_long *)MPC5XXX_SDRAM_MODE = sdram_conf->mode;
+ __asm__ volatile ("sync");
+
+ /* normal operation */
+ *(vu_long *)MPC5XXX_SDRAM_CTRL = sdram_conf->control | hi_addr_bit;
+ __asm__ volatile ("sync");
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE
+ * is something else than 0x00000000.
+ */
+
+#if defined(CONFIG_MPC5200)
+long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
+{
+ ulong dramsize = 0;
+ ulong dramsize2 = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup SDRAM chip selects */
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
+ __asm__ volatile ("sync");
+
+ if (sdram_conf->ddr) {
+ /* set tap delay */
+ *(vu_long *)MPC5XXX_CDM_PORCFG = sdram_conf->tapdelay;
+ __asm__ volatile ("sync");
+ }
+
+ /* find RAM size using SDRAM CS0 only */
+ mpc5xxx_sdram_start(sdram_conf, 0);
+ test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ mpc5xxx_sdram_start(sdram_conf, 1);
+ test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ mpc5xxx_sdram_start(sdram_conf, 0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20)) {
+ dramsize = 0;
+ }
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1;
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
+ }
+
+ /* let SDRAM CS1 start right after CS0 */
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */
+
+ /* find RAM size using SDRAM CS1 only */
+ mpc5xxx_sdram_start(sdram_conf, 0);
+ test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ mpc5xxx_sdram_start(sdram_conf, 1);
+ test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x80000000);
+ if (test1 > test2) {
+ mpc5xxx_sdram_start(sdram_conf, 0);
+ dramsize2 = test1;
+ } else {
+ dramsize2 = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize2 < (1 << 20)) {
+ dramsize2 = 0;
+ }
+
+ /* set SDRAM CS1 size according to the amount of RAM found */
+ if (dramsize2 > 0) {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize
+ | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1);
+ } else {
+ *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
+ }
+
+#else /* CFG_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
+ if (dramsize >= 0x13) {
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ } else {
+ dramsize = 0;
+ }
+
+ /* retrieve size of memory connected to SDRAM CS1 */
+ dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
+ if (dramsize2 >= 0x13) {
+ dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ } else {
+ dramsize2 = 0;
+ }
+
+#endif /* CFG_RAMBOOT */
+
+ return dramsize + dramsize2;
+}
+
+#elif defined(CONFIG_MGT5100)
+
+long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf)
+{
+ ulong dramsize = 0;
+#ifndef CFG_RAMBOOT
+ ulong test1, test2;
+
+ /* setup and enable SDRAM chip selects */
+ *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000;
+ *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */
+ __asm__ volatile ("sync");
+
+ /* setup config registers */
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = sdram_conf->config1;
+ *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = sdram_conf->config2;
+
+ /* address select register */
+ *(vu_long *)MPC5XXX_SDRAM_XLBSEL = sdram_conf->addrsel;
+ __asm__ volatile ("sync");
+
+ /* find RAM size */
+ mpc5xxx_sdram_start(sdram_conf, 0);
+ test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ mpc5xxx_sdram_start(sdram_conf, 1);
+ test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ mpc5xxx_sdram_start(sdram_conf, 0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* set SDRAM end address according to size */
+ *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15);
+
+#else /* CFG_RAMBOOT */
+
+ /* Retrieve amount of SDRAM available */
+ dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15);
+
+#endif /* CFG_RAMBOOT */
+
+ return dramsize;
+}
+
+#else
+#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+typedef struct {
+ ulong ddr;
+ ulong mode;
+ ulong emode;
+ ulong control;
+ ulong config1;
+ ulong config2;
+#if defined(CONFIG_MPC5200)
+ ulong tapdelay;
+#endif
+#if defined(CONFIG_MGT5100)
+ ulong addrsel;
+#endif
+} sdram_conf_t;
+
+long int mpc5xxx_sdram_init (sdram_conf_t *sdram_conf);
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+
+#include "sdram.h"
+
+#if CONFIG_TOTAL5200_REV==2
+#include "mt48lc32m16a2-75.h"
+#else
+#include "mt48lc16m16a2-75.h"
+#endif
+
+long int initdram (int board_type)
+{
+ sdram_conf_t sdram_conf;
+
+ sdram_conf.ddr = SDRAM_DDR;
+ sdram_conf.mode = SDRAM_MODE;
+ sdram_conf.emode = 0;
+ sdram_conf.control = SDRAM_CONTROL;
+ sdram_conf.config1 = SDRAM_CONFIG1;
+ sdram_conf.config2 = SDRAM_CONFIG2;
+#if defined(CONFIG_MPC5200)
+ sdram_conf.tapdelay = 0;
+#endif
+#if defined(CONFIG_MGT5100)
+ sdram_conf.addrsel = SDRAM_ADDRSEL;
+#endif
+ return mpc5xxx_sdram_init (&sdram_conf);
+}
+
+int checkboard (void)
+{
+#if defined(CONFIG_MPC5200)
+#if CONFIG_TOTAL5200_REV==2
+ puts ("Board: Total5200 Rev.2 ");
+#else
+ puts ("Board: Total5200 ");
+#endif
+#elif defined(CONFIG_MGT5100)
+ puts ("Board: Total5100 ");
+#endif
+
+/*
+ * Retrieve FPGA Revision.
+ */
+printf ("(FPGA %08X)\n", *(vu_long *) (CFG_FPGA_BASE + 0x400));
+
+/*
+ * Take all peripherals in power-up mode.
+ */
+#if CONFIG_TOTAL5200_REV==2
+ *(vu_char *) (CFG_CPLD_BASE + 0x46) = 0x70;
+#else
+ *(vu_long *) (CFG_CPLD_BASE + 0x400) = 0x70;
+#endif
+
+ return 0;
+}
+
+#if defined(CONFIG_MGT5100)
+int board_early_init_r(void)
+{
+ /*
+ * Now, when we are in RAM, enable CS0
+ * because CS_BOOT cannot be written.
+ */
+ *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */
+ *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PCI
+static struct pci_controller hose;
+
+extern void pci_mpc5xxx_init(struct pci_controller *);
+
+void pci_init_board(void)
+{
+ pci_mpc5xxx_init(&hose);
+}
+#endif
+
+#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET)
+
+/* IRDA_1 aka PSC6_3 (pin C13) */
+#define GPIO_IRDA_1 0x20000000UL
+
+void init_ide_reset (void)
+{
+ debug ("init_ide_reset\n");
+
+ /* Configure IRDA_1 (PSC6_3) as GPIO output for ATA reset */
+ *(vu_long *) MPC5XXX_GPIO_ENABLE |= GPIO_IRDA_1;
+ *(vu_long *) MPC5XXX_GPIO_DIR |= GPIO_IRDA_1;
+}
+
+void ide_set_reset (int idereset)
+{
+ debug ("ide_reset(%d)\n", idereset);
+
+ if (idereset) {
+ *(vu_long *) MPC5XXX_GPIO_DATA_O &= ~GPIO_IRDA_1;
+ } else {
+ *(vu_long *) MPC5XXX_GPIO_DATA_O |= GPIO_IRDA_1;
+ }
+}
+#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ cpu/mpc5xxx/start.o (.text)
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ . = ALIGN(16);
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x0FFF) & 0xFFFFF000;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+ __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(4096);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(4096);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
*/
if (fec->xcv_type == SEVENWIRE) {
/* 10MBit with 7-wire operation */
+#if defined(CONFIG_TOTAL5200)
+ /* 7-wire and USB2 on Ethernet */
+ *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00030000;
+#else /* !CONFIG_TOTAL5200 */
+ /* 7-wire only */
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000;
+#endif /* CONFIG_TOTAL5200 */
} else {
/* 100MBit with MD operation */
*(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000;
# else
fec->xcv_type = MII10;
# endif
+#elif defined(CONFIG_TOTAL5200)
+ fec->xcv_type = SEVENWIRE;
#else
#error fec->xcv_type not initialized.
#endif
struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA;
reg = *(vu_long *) MPC5XXX_GPS_PORT_CONFIG;
+#if defined(CONFIG_TOTAL5200)
+ /* ATA cs0/1 on i2c2 clk/io */
+ reg = (reg & ~0x03000000ul) | 0x02000000ul;
+#else
+ /* ATA cs0/1 on Local Plus cs4/5 */
reg = (reg & ~0x03000000ul) | 0x01000000ul;
+#endif /* CONFIG_TOTAL5200 */
*(vu_long *) MPC5XXX_GPS_PORT_CONFIG = reg;
/* All sample codes do that... */
#if defined(CFG_RAMBOOT)
#error CFG_LOWBOOT is incompatible with CFG_RAMBOOT
#endif /* CFG_RAMBOOT */
+#if defined(CFG_LOWBOOT)
+#error CFG_LOWBOOT is incompatible with MGT5100
+#endif /* CFG_LOWBOOT */
lis r4, CFG_DEFAULT_MBAR@h
lis r3, START_REG(CFG_BOOTCS_START)@h
ori r3, r3, START_REG(CFG_BOOTCS_START)@l
--- /dev/null
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@freescale.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * Check valid setting of revision define.
+ * Total5100 and Total5200 Rev.1 are identical except for the processor.
+ */
+#if (CONFIG_TOTAL5200_REV!=1 && CONFIG_TOTAL5200_REV!=2)
+#error CONFIG_TOTAL5200_REV must be 1 or 2
+#endif
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
+#define CONFIG_TOTAL5200 1 /* ... on Total5200 board */
+
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
+
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
+#endif
+
+/*
+ * Serial console configuration
+ */
+#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */
+#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
+
+
+#ifdef CONFIG_MPC5200 /* MGT5100 PCI is not supported yet. */
+/*
+ * PCI Mapping:
+ * 0x40000000 - 0x4fffffff - PCI Memory
+ * 0x50000000 - 0x50ffffff - PCI IO Space
+ */
+#define CONFIG_PCI 1
+#define CONFIG_PCI_PNP 1
+#define CONFIG_PCI_SCAN_SHOW 1
+
+#define CONFIG_PCI_MEM_BUS 0x40000000
+#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
+#define CONFIG_PCI_MEM_SIZE 0x10000000
+
+#define CONFIG_PCI_IO_BUS 0x50000000
+#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
+#define CONFIG_PCI_IO_SIZE 0x01000000
+
+#define CONFIG_NET_MULTI 1
+#define CONFIG_EEPRO100 1
+#define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
+#define CONFIG_NS8382X 1
+
+#define ADD_PCI_CMD CFG_CMD_PCI
+
+#else /* MGT5100 */
+
+#define ADD_PCI_CMD 0 /* no CFG_CMD_PCI */
+
+#endif
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#if 1
+#define CONFIG_USB_OHCI
+#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
+#define CONFIG_USB_STORAGE
+#else
+#define ADD_USB_CMD 0
+#endif
+
+/*
+ * Supported commands
+ */
+#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
+ CFG_CMD_PING | \
+ CFG_CMD_I2C | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_FAT | \
+ CFG_CMD_IDE | \
+ ADD_PCI_CMD | \
+ ADD_USB_CMD)
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+#if (TEXT_BASE == 0xFE000000) /* Boot low */
+# define CFG_LOWBOOT 1
+#endif
+
+/*
+ * Autobooting
+ */
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ "bootfile=/tftpboot/MPC5200/uImage\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#if defined(CONFIG_MPC5200)
+/*
+ * IPB Bus clocking configuration.
+ */
+#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
+#endif
+
+/*
+ * I2C configuration
+ */
+#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
+#define CFG_I2C_MODULE 1 /* Select I2C module #1 or #2 */
+
+#define CFG_I2C_SPEED 100000 /* 100 kHz */
+#define CFG_I2C_SLAVE 0x7F
+
+/*
+ * EEPROM configuration
+ */
+#define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 70
+
+/*
+ * Flash configuration
+ */
+#define CFG_FLASH_CFI 1 /* Flash is CFI conformant */
+#define CFG_FLASH_CFI_DRIVER 1 /* Use the common driver */
+#if CONFIG_TOTAL5200_REV==2
+# define CFG_MAX_FLASH_BANKS 3 /* max num of flash banks */
+# define CFG_FLASH_BANKS_LIST { CFG_CS5_START, CFG_CS4_START, CFG_BOOTCS_START }
+#else
+# define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks */
+# define CFG_FLASH_BANKS_LIST { CFG_BOOTCS_START }
+#endif
+#define CFG_FLASH_EMPTY_INFO
+#define CFG_MAX_FLASH_SECT 128 /* max num of sects on one chip */
+
+#if CONFIG_TOTAL5200_REV==1
+# define CFG_FLASH_BASE 0xFE000000
+# define CFG_FLASH_SIZE 0x02000000
+#elif CONFIG_TOTAL5200_REV==2
+# define CFG_FLASH_BASE 0xFA000000
+# define CFG_FLASH_SIZE 0x06000000
+#endif /* CONFIG_TOTAL5200_REV */
+
+#if !defined(CFG_LOWBOOT)
+# define CFG_ENV_ADDR 0xFE040000
+#else /* CFG_LOWBOOT */
+# define CFG_ENV_ADDR 0xFFF40000
+#endif /* CFG_LOWBOOT */
+
+/*
+ * Environment settings
+ */
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_SIZE 0x40000
+#define CFG_ENV_SECT_SIZE 0x40000
+#define CONFIG_ENV_OVERWRITE 1
+
+/*
+ * Memory map
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_DEFAULT_MBAR 0x80000000
+#define CFG_MBAR 0xF0000000 /* 64 kB */
+#define CFG_FPGA_BASE 0xF0010000 /* 64 kB */
+#define CFG_CPLD_BASE 0xF0020000 /* 64 kB */
+#define CFG_LCD_BASE 0xF0100000 /* 2048 kB */
+
+/* Use SRAM until RAM will be available */
+#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
+#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */
+
+#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_BASE TEXT_BASE
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+# define CFG_RAMBOOT 1
+#endif
+
+#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*
+ * Ethernet configuration
+ */
+#define CONFIG_MPC5xxx_FEC 1
+/* dummy, 7-wire FEC does not have phy address */
+#define CONFIG_PHY_ADDR 0x00
+
+/*
+ * GPIO configuration
+ *
+ * CS1: SDRAM CS1 disabled, gpio_wkup_6 enabled 0
+ * Reserved 0
+ * ALTs: CAN1/2 on PSC2, SPI on PSC3 00
+ * CS7: Interrupt GPIO on PSC3_5 0
+ * CS8: Interrupt GPIO on PSC3_4 0
+ * ATA: reset default, changed in ATA driver 00
+ * IR_USB_CLK: IrDA/USB 48MHz clock gen. int., pin is GPIO 0
+ * IRDA: reset default, changed in IrDA driver 000
+ * ETHER: reset default, changed in Ethernet driver 0000
+ * PCI_DIS: reset default, changed in PCI driver 0
+ * USB_SE: reset default, changed in USB driver 0
+ * USB: reset default, changed in USB driver 00
+ * PSC3: SPI and UART functionality without CD 1100
+ * Reserved 0
+ * PSC2: CAN1/2 001
+ * Reserved 0
+ * PSC1: reset default, changed in AC'97 driver 000
+ *
+ */
+#define CFG_GPS_PORT_CONFIG 0x00000C10
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
+#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+/*
+ * Various low-level settings
+ */
+#if defined(CONFIG_MPC5200)
+#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
+#define CFG_HID0_FINAL HID0_ICE
+#else
+#define CFG_HID0_INIT 0
+#define CFG_HID0_FINAL 0
+#endif
+
+#if defined (CONFIG_MGT5100)
+# define CONFIG_BOARD_EARLY_INIT_R /* switch from CS_BOOT to CS0 */
+#endif
+
+#if CONFIG_TOTAL5200_REV==1
+# define CFG_BOOTCS_START CFG_FLASH_BASE
+# define CFG_BOOTCS_SIZE 0x02000000 /* 32 MB */
+# define CFG_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
+# define CFG_CS0_START CFG_FLASH_BASE
+# define CFG_CS0_SIZE 0x02000000 /* 32 MB */
+#else
+# define CFG_BOOTCS_START (CFG_CS4_START + CFG_CS4_SIZE)
+# define CFG_BOOTCS_SIZE 0x02000000 /* 32 MB */
+# define CFG_BOOTCS_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
+# define CFG_CS4_START (CFG_CS5_START + CFG_CS5_SIZE)
+# define CFG_CS4_SIZE 0x02000000 /* 32 MB */
+# define CFG_CS4_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
+# define CFG_CS5_START CFG_FLASH_BASE
+# define CFG_CS5_SIZE 0x02000000 /* 32 MB */
+# define CFG_CS5_CFG 0x0004DF00 /* 4WS, MX, AL, CE, AS_25, DS_32 */
+#endif
+
+#define CFG_CS1_START CFG_FPGA_BASE
+#define CFG_CS1_SIZE 0x00010000 /* 64 kB */
+#define CFG_CS1_CFG 0x0019FF00 /* 25WS, MX, AL, AA, CE, AS_25, DS_32 */
+
+#define CFG_CS2_START CFG_LCD_BASE
+#define CFG_CS2_SIZE 0x00200000 /* 2048 kB */
+#define CFG_CS2_CFG 0x0019FD00 /* 25WS, MX, AL, AA, CE, AS_25, DS_16 */
+
+#if CONFIG_TOTAL5200_REV==1
+# define CFG_CS3_START CFG_CPLD_BASE
+# define CFG_CS3_SIZE 0x00010000 /* 64 kB */
+# define CFG_CS3_CFG 0x000ADF00 /* 10WS, MX, AL, CE, AS_25, DS_32 */
+#else
+# define CFG_CS3_START CFG_CPLD_BASE
+# define CFG_CS3_SIZE 0x00010000 /* 64 kB */
+# define CFG_CS3_CFG 0x000AD800 /* 10WS, MX, AL, CE, AS_24, DS_8 */
+#endif
+
+#define CFG_CS_BURST 0x00000000
+#define CFG_CS_DEADCYCLE 0x33333333
+
+/*-----------------------------------------------------------------------
+ * USB stuff
+ *-----------------------------------------------------------------------
+ */
+#define CONFIG_USB_CLOCK 0x0001BBBB
+#define CONFIG_USB_CONFIG 0x00001000
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff Supports IDE harddisk
+ *-----------------------------------------------------------------------
+ */
+
+#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+
+#define CONFIG_IDE_RESET /* reset for ide supported */
+#define CONFIG_IDE_PREINIT
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (0x0060)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET (0x005C)
+
+/* Interval between registers */
+#define CFG_ATA_STRIDE 4
+
+#endif /* __CONFIG_H */
/* GPIO registers */
#define MPC5XXX_GPS_PORT_CONFIG (MPC5XXX_GPIO + 0x0000)
+/* Standard GPIO registers (simple, output only and simple interrupt */
+#define MPC5XXX_GPIO_ENABLE (MPC5XXX_GPIO + 0x0004)
+#define MPC5XXX_GPIO_ODE (MPC5XXX_GPIO + 0x0008)
+#define MPC5XXX_GPIO_DIR (MPC5XXX_GPIO + 0x000c)
+#define MPC5XXX_GPIO_DATA_O (MPC5XXX_GPIO + 0x0010)
+#define MPC5XXX_GPIO_DATA_I (MPC5XXX_GPIO + 0x0014)
+#define MPC5XXX_GPIO_OO_ENABLE (MPC5XXX_GPIO + 0x0018)
+#define MPC5XXX_GPIO_OO_DATA (MPC5XXX_GPIO + 0x001C)
+#define MPC5XXX_GPIO_SI_ENABLE (MPC5XXX_GPIO + 0x0020)
+#define MPC5XXX_GPIO_SI_ODE (MPC5XXX_GPIO + 0x0024)
+#define MPC5XXX_GPIO_SI_DIR (MPC5XXX_GPIO + 0x0028)
+#define MPC5XXX_GPIO_SI_DATA (MPC5XXX_GPIO + 0x002C)
+#define MPC5XXX_GPIO_SI_IEN (MPC5XXX_GPIO + 0x0030)
+#define MPC5XXX_GPIO_SI_ITYPE (MPC5XXX_GPIO + 0x0034)
+#define MPC5XXX_GPIO_SI_MEN (MPC5XXX_GPIO + 0x0038)
+#define MPC5XXX_GPIO_SI_STATUS (MPC5XXX_GPIO + 0x003C)
+
/* WakeUp GPIO registers */
#define MPC5XXX_WU_GPIO_ENABLE (MPC5XXX_WU_GPIO + 0x0000)
#define MPC5XXX_WU_GPIO_ODE (MPC5XXX_WU_GPIO + 0x0004)
projects / u-boot.git / commitdiff