--- /dev/null
+# SPDX-License-Identifier: GPL-2.0
+# (C) Copyright 2023, Advanced Micro Devices, Inc.
+
+import pytest
+import random
+import re
+import u_boot_utils
+
+"""
+Note: This test doesn't rely on boardenv_* configuration values but it can
+change the test behavior. To test MMC file system cases (fat32, ext2, ext4),
+MMC device should be formatted and valid partitions should be created for
+different file system, otherwise it may leads to failure. This test will be
+skipped if the MMC device is not detected.
+
+For example:
+
+# Setup env__mmc_device_test_skip to not skipping the test. By default, its
+# value is set to True. Set it to False to run all tests for MMC device.
+env__mmc_device_test_skip = False
+"""
+
+mmc_set_up = False
+controllers = 0
+devices = {}
+
+def setup_mmc(u_boot_console):
+ if u_boot_console.config.env.get('env__mmc_device_test_skip', True):
+ pytest.skip('MMC device test is not enabled')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+def test_mmc_list(u_boot_console):
+ setup_mmc(u_boot_console)
+ output = u_boot_console.run_command('mmc list')
+ if 'No MMC device available' in output:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if 'Card did not respond to voltage select' in output:
+ pytest.skip('No SD/MMC card present')
+
+ array = output.split()
+ global devices
+ global controllers
+ controllers = int(len(array) / 2)
+ for x in range(0, controllers):
+ y = x * 2
+ devices[x] = {}
+ devices[x]['name'] = array[y]
+
+ global mmc_set_up
+ mmc_set_up = True
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+def test_mmc_dev(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ fail = 0
+ for x in range(0, controllers):
+ devices[x]['detected'] = 'yes'
+ output = u_boot_console.run_command('mmc dev %d' % x)
+
+ # Some sort of switch here
+ if 'Card did not respond to voltage select' in output:
+ fail = 1
+ devices[x]['detected'] = 'no'
+
+ if 'no mmc device at slot' in output:
+ devices[x]['detected'] = 'no'
+
+ if 'MMC: no card present' in output:
+ devices[x]['detected'] = 'no'
+
+ if fail:
+ pytest.fail('Card not present')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+def test_mmcinfo(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ output = u_boot_console.run_command('mmcinfo')
+ if 'busy timeout' in output:
+ pytest.skip('No SD/MMC/eMMC device present')
+
+ obj = re.search(r'Capacity: (\d+|\d+[\.]?\d)', output)
+ try:
+ capacity = float(obj.groups()[0])
+ print(capacity)
+ devices[x]['capacity'] = capacity
+ print('Capacity of dev %d is: %g GiB' % (x, capacity))
+ except ValueError:
+ pytest.fail('MMC capacity not recognized')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+def test_mmc_info(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+
+ output = u_boot_console.run_command('mmc info')
+
+ obj = re.search(r'Capacity: (\d+|\d+[\.]?\d)', output)
+ try:
+ capacity = float(obj.groups()[0])
+ print(capacity)
+ if devices[x]['capacity'] != capacity:
+ pytest.fail("MMC capacity doesn't match mmcinfo")
+
+ except ValueError:
+ pytest.fail('MMC capacity not recognized')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+def test_mmc_rescan(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ output = u_boot_console.run_command('mmc rescan')
+ if output:
+ pytest.fail('mmc rescan has something to check')
+ output = u_boot_console.run_command('echo $?')
+ assert output.endswith('0')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+def test_mmc_part(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ output = u_boot_console.run_command('mmc part')
+
+ lines = output.split('\n')
+ part_fat = []
+ part_ext = []
+ for line in lines:
+ obj = re.search(
+ r'(\d)\s+\d+\s+\d+\s+\w+\d+\w+-\d+\s+(\d+\w+)', line)
+ if obj:
+ part_id = int(obj.groups()[0])
+ part_type = obj.groups()[1]
+ print('part_id:%d, part_type:%s' % (part_id, part_type))
+
+ if part_type in ['0c', '0b', '0e']:
+ print('Fat detected')
+ part_fat.append(part_id)
+ elif part_type == '83':
+ print('ext detected')
+ part_ext.append(part_id)
+ else:
+ pytest.fail('Unsupported Filesystem on device %d' % x)
+ devices[x]['ext4'] = part_ext
+ devices[x]['ext2'] = part_ext
+ devices[x]['fat'] = part_fat
+
+ if not part_ext and not part_fat:
+ pytest.fail('No partition detected on device %d' % x)
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_fat')
+def test_mmc_fatls_fatinfo(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = 'fat'
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ output = u_boot_console.run_command(
+ 'fatls mmc %d:%s' % (x, part))
+ if 'Unrecognized filesystem type' in output:
+ partitions.remove(part)
+ pytest.fail('Unrecognized filesystem')
+
+ if not re.search(r'\d file\(s\), \d dir\(s\)', output):
+ pytest.fail('%s read failed on device %d' % (fs.upper, x))
+ output = u_boot_console.run_command(
+ 'fatinfo mmc %d:%s' % (x, part))
+ string = 'Filesystem: %s' % fs.upper
+ if re.search(string, output):
+ pytest.fail('%s FS failed on device %d' % (fs.upper(), x))
+ part_detect = 1
+
+ if not part_detect:
+ pytest.skip('No %s partition detected' % fs.upper())
+
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_fat')
+@pytest.mark.buildconfigspec('cmd_memory')
+def test_mmc_fatload_fatwrite(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = 'fat'
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ devices[x]['addr_%d' % part] = addr
+ size = random.randint(4, 1 * 1024 * 1024)
+ devices[x]['size_%d' % part] = size
+ # count CRC32
+ output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail('CRC32 failed')
+ expected_crc32 = m.group(1)
+ devices[x]['expected_crc32_%d' % part] = expected_crc32
+ # do write
+ file = '%s_%d' % ('uboot_test', size)
+ devices[x]['file_%d' % part] = file
+ output = u_boot_console.run_command(
+ '%swrite mmc %d:%s %x %s %x' % (fs, x, part, addr, file, size)
+ )
+ assert 'Unable to write' not in output
+ assert 'Error' not in output
+ assert 'overflow' not in output
+ expected_text = '%d bytes written' % size
+ assert expected_text in output
+
+ alignment = int(
+ u_boot_console.config.buildconfig.get(
+ 'config_sys_cacheline_size', 128
+ )
+ )
+ offset = random.randrange(alignment, 1024, alignment)
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x %s' % (fs, x, part, addr + offset, file)
+ )
+ assert 'Invalid FAT entry' not in output
+ assert 'Unable to read file' not in output
+ assert 'Misaligned buffer address' not in output
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip('No %s partition detected' % fs.upper())
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_ext4')
+def test_mmc_ext4ls(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = 'ext4'
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ u_boot_console.run_command('mmc dev %d' % x)
+ for part in partitions:
+ output = u_boot_console.run_command('%sls mmc %d:%s' % (fs, x, part))
+ if 'Unrecognized filesystem type' in output:
+ partitions.remove(part)
+ pytest.fail('Unrecognized filesystem')
+ part_detect = 1
+
+ if not part_detect:
+ pytest.skip('No %s partition detected' % fs.upper())
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_ext4')
+@pytest.mark.buildconfigspec('ext4_write')
+@pytest.mark.buildconfigspec('cmd_memory')
+def test_mmc_ext4load_ext4write(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = 'ext4'
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ devices[x]['addr_%d' % part] = addr
+ size = random.randint(4, 1 * 1024 * 1024)
+ devices[x]['size_%d' % part] = size
+ # count CRC32
+ output = u_boot_console.run_command('crc32 %x %x' % (addr, size))
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail('CRC32 failed')
+ expected_crc32 = m.group(1)
+ devices[x]['expected_crc32_%d' % part] = expected_crc32
+ # do write
+
+ file = '%s_%d' % ('uboot_test', size)
+ devices[x]['file_%d' % part] = file
+ output = u_boot_console.run_command(
+ '%swrite mmc %d:%s %x /%s %x' % (fs, x, part, addr, file, size)
+ )
+ assert 'Unable to write' not in output
+ assert 'Error' not in output
+ assert 'overflow' not in output
+ expected_text = '%d bytes written' % size
+ assert expected_text in output
+
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x /%s' % (fs, x, part, addr + offset, file)
+ )
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip('No %s partition detected' % fs.upper())
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_ext2')
+def test_mmc_ext2ls(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = 'ext2'
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ output = u_boot_console.run_command('%sls mmc %d:%s' % (fs, x, part))
+ if 'Unrecognized filesystem type' in output:
+ partitions.remove(part)
+ pytest.fail('Unrecognized filesystem')
+ part_detect = 1
+
+ if not part_detect:
+ pytest.skip('No %s partition detected' % fs.upper())
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_ext2')
+@pytest.mark.buildconfigspec('cmd_ext4')
+@pytest.mark.buildconfigspec('ext4_write')
+@pytest.mark.buildconfigspec('cmd_memory')
+def test_mmc_ext2load(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = 'ext2'
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = devices[x]['addr_%d' % part]
+ size = devices[x]['size_%d' % part]
+ expected_crc32 = devices[x]['expected_crc32_%d' % part]
+ file = devices[x]['file_%d' % part]
+
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x /%s' % (fs, x, part, addr + offset, file)
+ )
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip('No %s partition detected' % fs.upper())
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_fs_generic')
+def test_mmc_ls(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ for fs in ['fat', 'ext4']:
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ output = u_boot_console.run_command('ls mmc %d:%s' % (x, part))
+ if re.search(r'No \w+ table on this device', output):
+ pytest.fail(
+ '%s: Partition table not found %d' % (fs.upper(), x)
+ )
+
+ if not part_detect:
+ pytest.skip('No partition detected')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_fs_generic')
+def test_mmc_load(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ for fs in ['fat', 'ext4']:
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = devices[x]['addr_%d' % part]
+ size = devices[x]['size_%d' % part]
+ expected_crc32 = devices[x]['expected_crc32_%d' % part]
+ file = devices[x]['file_%d' % part]
+
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ 'load mmc %d:%s %x /%s' % (x, part, addr + offset, file)
+ )
+ expected_text = '%d bytes read' % size
+ assert expected_text in output
+
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr + offset)
+ )
+ assert expected_crc32 in output
+
+ if not part_detect:
+ pytest.skip('No partition detected')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_fs_generic')
+def test_mmc_save(u_boot_console):
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ for fs in ['fat', 'ext4']:
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = devices[x]['addr_%d' % part]
+ size = 0
+ file = devices[x]['file_%d' % part]
+
+ offset = random.randrange(128, 1024, 128)
+ output = u_boot_console.run_command(
+ 'save mmc %d:%s %x /%s %d'
+ % (x, part, addr + offset, file, size)
+ )
+ expected_text = '%d bytes written' % size
+ assert expected_text in output
+
+ if not part_detect:
+ pytest.skip('No partition detected')
+
+@pytest.mark.buildconfigspec('cmd_mmc')
+@pytest.mark.buildconfigspec('cmd_fat')
+@pytest.mark.buildconfigspec('cmd_memory')
+def test_mmc_fat_read_write_files(u_boot_console):
+ test_mmc_list(u_boot_console)
+ test_mmc_dev(u_boot_console)
+ test_mmcinfo(u_boot_console)
+ test_mmc_part(u_boot_console)
+ if not mmc_set_up:
+ pytest.skip('No SD/MMC/eMMC controller available')
+
+ if not devices:
+ pytest.skip('No devices detected')
+
+ part_detect = 0
+ fs = 'fat'
+
+ # Number of files to be written/read in MMC card
+ num_files = 100
+
+ for x in range(0, controllers):
+ if devices[x]['detected'] == 'yes':
+ u_boot_console.run_command('mmc dev %d' % x)
+ try:
+ partitions = devices[x][fs]
+ except:
+ print('No %s table on this device' % fs.upper())
+ continue
+
+ for part in partitions:
+ part_detect = 1
+ addr = u_boot_utils.find_ram_base(u_boot_console)
+ count_f = 0
+ addr_l = []
+ size_l = []
+ file_l = []
+ crc32_l = []
+ offset_l = []
+ addr_l.append(addr)
+
+ while count_f < num_files:
+ size_l.append(random.randint(4, 1 * 1024 * 1024))
+
+ # CRC32 count
+ output = u_boot_console.run_command(
+ 'crc32 %x %x' % (addr_l[count_f], size_l[count_f])
+ )
+ m = re.search('==> (.+?)', output)
+ if not m:
+ pytest.fail('CRC32 failed')
+ crc32_l.append(m.group(1))
+
+ # Write operation
+ file_l.append('%s_%d_%d' % ('uboot_test', count_f, size_l[count_f]))
+ output = u_boot_console.run_command(
+ '%swrite mmc %d:%s %x %s %x'
+ % (
+ fs,
+ x,
+ part,
+ addr_l[count_f],
+ file_l[count_f],
+ size_l[count_f],
+ )
+ )
+ assert 'Unable to write' not in output
+ assert 'Error' not in output
+ assert 'overflow' not in output
+ expected_text = '%d bytes written' % size_l[count_f]
+ assert expected_text in output
+
+ addr_l.append(addr_l[count_f] + size_l[count_f] + 1048576)
+ count_f += 1
+
+ count_f = 0
+ while count_f < num_files:
+ alignment = int(
+ u_boot_console.config.buildconfig.get(
+ 'config_sys_cacheline_size', 128
+ )
+ )
+ offset_l.append(random.randrange(alignment, 1024, alignment))
+
+ # Read operation
+ output = u_boot_console.run_command(
+ '%sload mmc %d:%s %x %s'
+ % (
+ fs,
+ x,
+ part,
+ addr_l[count_f] + offset_l[count_f],
+ file_l[count_f],
+ )
+ )
+ assert 'Invalid FAT entry' not in output
+ assert 'Unable to read file' not in output
+ assert 'Misaligned buffer address' not in output
+ expected_text = '%d bytes read' % size_l[count_f]
+ assert expected_text in output
+
+ output = u_boot_console.run_command(
+ 'crc32 %x $filesize' % (addr_l[count_f] + offset_l[count_f])
+ )
+ assert crc32_l[count_f] in output
+
+ count_f += 1
+
+ if not part_detect:
+ pytest.skip('No %s partition detected' % fs.upper())
projects / u-boot.git / commitdiff