dm: clk: fix PWR_CR3 register's bit 2 name

Fix bit 2 name of PWR_CR3 register to match with the
last STM32H7 reference manual available here :

http://www.st.com/content/st_com/en/support/resources/
resource-selector.html?querycriteria=productId=SS1951$$
resourceCategory=technical_literature$$resourceType=reference_manual

Update also comment about voltage scaling 1 values

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Vikas Manocha <vikas.manocha@st.com>

diff --git a/drivers/clk/clk_stm32h7.c b/drivers/clk/clk_stm32h7.c
index 757882219a25145da6111e244d6aead53e1f03f9..f84a4d2b2f6d2d9289f34239ce72aceaf2cccc63 100644 (file)
--- a/drivers/clk/clk_stm32h7.c
+++ b/drivers/clk/clk_stm32h7.c
@@ -109,7 +109,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #define                QSPISRC_PER_CK          3
 
 #define PWR_CR3                                0x0c
-#define PWR_CR3_SDEN                   BIT(2)
+#define PWR_CR3_SCUEN                  BIT(2)
 #define PWR_D3CR                       0x18
 #define PWR_D3CR_VOS_MASK              GENMASK(15, 14)
 #define PWR_D3CR_VOS_SHIFT             14
@@ -361,11 +361,11 @@ int configure_clocks(struct udevice *dev)
        writel(0x0, &regs->d2ccip1r);
        writel(0x0, &regs->d2ccip2r);
 
-       /* Set voltage scaling at scale 1 */
+       /* Set voltage scaling at scale 1 (1,15 - 1,26 Volts) */
        clrsetbits_le32(pwr_base + PWR_D3CR, PWR_D3CR_VOS_MASK,
                        VOS_SCALE_1 << PWR_D3CR_VOS_SHIFT);
-       /* disable step down converter */
-       clrbits_le32(pwr_base + PWR_CR3, PWR_CR3_SDEN);
+       /* Lock supply configuration update */
+       clrbits_le32(pwr_base + PWR_CR3, PWR_CR3_SCUEN);
        while (!(readl(pwr_base + PWR_D3CR) & PWR_D3CR_VOSREADY))
                ;