]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm: K3: Add basic support for J721S2 SoC definition
authorDavid Huang <d-huang@ti.com>
Tue, 25 Jan 2022 15:26:31 +0000 (20:56 +0530)
committerTom Rini <trini@konsulko.com>
Tue, 8 Feb 2022 14:41:26 +0000 (09:41 -0500)
Add basic support for J721S2 SoC definition

Signed-off-by: David Huang <d-huang@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
12 files changed:
arch/arm/mach-k3/Kconfig
arch/arm/mach-k3/Makefile
arch/arm/mach-k3/arm64-mmu.c
arch/arm/mach-k3/include/mach/hardware.h
arch/arm/mach-k3/include/mach/j721s2_hardware.h [new file with mode: 0644]
arch/arm/mach-k3/include/mach/j721s2_spl.h [new file with mode: 0644]
arch/arm/mach-k3/include/mach/spl.h
arch/arm/mach-k3/j721s2/Makefile [new file with mode: 0644]
arch/arm/mach-k3/j721s2/clk-data.c [new file with mode: 0644]
arch/arm/mach-k3/j721s2/dev-data.c [new file with mode: 0644]
arch/arm/mach-k3/j721s2_init.c [new file with mode: 0644]
include/configs/j721s2_evm.h [new file with mode: 0644]

index 526f5f8b76c2c221a34f2a5ba7b8f76994b46c3f..a01bf23514990e3bdb2b18d37926975b814c275b 100644 (file)
@@ -10,6 +10,9 @@ config SOC_K3_AM6
 config SOC_K3_J721E
        bool "TI's K3 based J721E SoC Family Support"
 
+config SOC_K3_J721S2
+       bool "TI's K3 based J721S2 SoC Family Support"
+
 config SOC_K3_AM642
        bool "TI's K3 based AM642 SoC Family Support"
 
@@ -21,7 +24,7 @@ config SYS_SOC
 config SYS_K3_NON_SECURE_MSRAM_SIZE
        hex
        default 0x80000 if SOC_K3_AM6
-       default 0x100000 if SOC_K3_J721E
+       default 0x100000 if SOC_K3_J721E || SOC_K3_J721S2
        default 0x1c0000 if SOC_K3_AM642
        help
          Describes the total size of the MCU or OCMC MSRAM present on
@@ -32,7 +35,7 @@ config SYS_K3_NON_SECURE_MSRAM_SIZE
 config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
        hex
        default 0x58000 if SOC_K3_AM6
-       default 0xc0000 if SOC_K3_J721E
+       default 0xc0000 if SOC_K3_J721E || SOC_K3_J721S2
        default 0x180000 if SOC_K3_AM642
        help
          Describes the maximum size of the image that ROM can download
@@ -41,14 +44,14 @@ config SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
 config SYS_K3_MCU_SCRATCHPAD_BASE
        hex
        default 0x40280000 if SOC_K3_AM6
-       default 0x40280000 if SOC_K3_J721E
+       default 0x40280000 if SOC_K3_J721E || SOC_K3_J721S2
        help
          Describes the base address of MCU Scratchpad RAM.
 
 config SYS_K3_MCU_SCRATCHPAD_SIZE
        hex
        default 0x200 if SOC_K3_AM6
-       default 0x200 if SOC_K3_J721E
+       default 0x200 if SOC_K3_J721E || SOC_K3_J721S2
        help
          Describes the size of MCU Scratchpad RAM.
 
@@ -56,6 +59,7 @@ config SYS_K3_BOOT_PARAM_TABLE_INDEX
        hex
        default 0x41c7fbfc if SOC_K3_AM6
        default 0x41cffbfc if SOC_K3_J721E
+       default 0x41cfdbfc if SOC_K3_J721S2
        default 0x701bebfc if SOC_K3_AM642
        help
          Address at which ROM stores the value which determines if SPL
@@ -156,7 +160,7 @@ config K3_ATF_LOAD_ADDR
 
 config K3_DM_FW
        bool "Separate DM firmware image"
-       depends on SPL && CPU_V7R && SOC_K3_J721E && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
+       depends on SPL && CPU_V7R && (SOC_K3_J721E || SOC_K3_J721S2) && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
        default y
        help
          Enabling this will indicate that the system has separate DM
@@ -169,4 +173,5 @@ source "board/ti/am65x/Kconfig"
 source "board/ti/am64x/Kconfig"
 source "board/ti/j721e/Kconfig"
 source "board/siemens/iot2050/Kconfig"
+source "board/ti/j721s2/Kconfig"
 endif
index 47cf7b6d17a80662d6b533a8a75a4a35c2792272..c0a6a9c87d8fac4037a2591ed7e8e15e1db224f2 100644 (file)
@@ -5,6 +5,7 @@
 
 obj-$(CONFIG_SOC_K3_AM6) += am6_init.o
 obj-$(CONFIG_SOC_K3_J721E) += j721e_init.o j721e/ j7200/
+obj-$(CONFIG_SOC_K3_J721S2) += j721s2_init.o j721s2/
 obj-$(CONFIG_SOC_K3_AM642) += am642_init.o
 obj-$(CONFIG_ARM64) += arm64-mmu.o
 obj-$(CONFIG_CPU_V7R) += r5_mpu.o lowlevel_init.o
index 94242e1e5cc3c449b2c5eec45c6eacee3cd91c7c..527e664318883b2b3ea2d7792b21ec717bee4402 100644 (file)
@@ -181,6 +181,47 @@ struct mm_region *mem_map = j7200_mem_map;
 
 #endif /* CONFIG_SOC_K3_J721E */
 
+#ifdef CONFIG_SOC_K3_J721S2
+#define NR_MMU_REGIONS (CONFIG_NR_DRAM_BANKS + 3)
+
+/* ToDo: Add 64bit IO */
+struct mm_region j721s2_mem_map[NR_MMU_REGIONS] = {
+       {
+               .virt = 0x0UL,
+               .phys = 0x0UL,
+               .size = 0x80000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+                        PTE_BLOCK_NON_SHARE |
+                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
+       }, {
+               .virt = 0x80000000UL,
+               .phys = 0x80000000UL,
+               .size = 0x80000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+                        PTE_BLOCK_INNER_SHARE
+       }, {
+               .virt = 0x880000000UL,
+               .phys = 0x880000000UL,
+               .size = 0x80000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+                        PTE_BLOCK_INNER_SHARE
+       }, {
+               .virt = 0x500000000UL,
+               .phys = 0x500000000UL,
+               .size = 0x400000000UL,
+               .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+                        PTE_BLOCK_NON_SHARE |
+                        PTE_BLOCK_PXN | PTE_BLOCK_UXN
+       }, {
+               /* List terminator */
+               0,
+       }
+};
+
+struct mm_region *mem_map = j721s2_mem_map;
+
+#endif /* CONFIG_SOC_K3_J721S2 */
+
 #ifdef CONFIG_SOC_K3_AM642
 /* NR_DRAM_BANKS + 32bit IO + 64bit IO + terminator */
 #define NR_MMU_REGIONS (CONFIG_NR_DRAM_BANKS + 3)
index 8725e7d51a5bafab4c0a9b002249d8ab2359bc16..5c1265ffe94963ff91a6180af996d91d8b7ca334 100644 (file)
 #include "j721e_hardware.h"
 #endif
 
+#ifdef CONFIG_SOC_K3_J721S2
+#include "j721s2_hardware.h"
+#endif
+
 #ifdef CONFIG_SOC_K3_AM642
 #include "am64_hardware.h"
 #endif
diff --git a/arch/arm/mach-k3/include/mach/j721s2_hardware.h b/arch/arm/mach-k3/include/mach/j721s2_hardware.h
new file mode 100644 (file)
index 0000000..23dfe2e
--- /dev/null
@@ -0,0 +1,60 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * K3: J721S2 SoC definitions, structures etc.
+ *
+ * (C) Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+ */
+#ifndef __ASM_ARCH_J721S2_HARDWARE_H
+#define __ASM_ARCH_J721S2_HARDWARE_H
+
+#include <config.h>
+#ifndef __ASSEMBLY__
+#include <linux/bitops.h>
+#endif
+
+#define CTRL_MMR0_BASE                                 0x00100000
+#define CTRLMMR_MAIN_DEVSTAT                           (CTRL_MMR0_BASE + 0x30)
+
+#define MAIN_DEVSTAT_BOOT_MODE_B_MASK                  BIT(0)
+#define MAIN_DEVSTAT_BOOT_MODE_B_SHIFT                 0
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_MASK                        GENMASK(3, 1)
+#define MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT               1
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK       BIT(6)
+#define MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT          6
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_MASK                        BIT(7)
+#define MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT               7
+
+#define WKUP_CTRL_MMR0_BASE                            0x43000000
+#define MCU_CTRL_MMR0_BASE                             0x40f00000
+
+#define CTRLMMR_WKUP_DEVSTAT                           (WKUP_CTRL_MMR0_BASE + 0x30)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK             GENMASK(5, 3)
+#define WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT            3
+#define WKUP_DEVSTAT_MCU_OMLY_MASK                     BIT(6)
+#define WKUP_DEVSTAT_MCU_ONLY_SHIFT                    6
+
+/*
+ * The CTRL_MMR0 memory space is divided into several equally-spaced
+ * partitions, so defining the partition size allows us to determine
+ * register addresses common to those partitions.
+ */
+#define CTRL_MMR0_PARTITION_SIZE                       0x4000
+
+/*
+ * CTRL_MMR0, WKUP_CTRL_MMR0, and MCU_CTR_MMR0 lock/kick-mechanism
+ * shared register definitions.
+ */
+#define CTRLMMR_LOCK_KICK0                             0x01008
+#define CTRLMMR_LOCK_KICK0_UNLOCK_VAL                  0x68ef3490
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_MASK               BIT(0)
+#define CTRLMMR_LOCK_KICK0_UNLOCKED_SHIFT              0
+#define CTRLMMR_LOCK_KICK1                             0x0100c
+#define CTRLMMR_LOCK_KICK1_UNLOCK_VAL                  0xd172bc5a
+
+/* ROM HANDOFF Structure location */
+#define ROM_ENTENDED_BOOT_DATA_INFO                    0x41cfdb00
+
+/* MCU SCRATCHPAD usage */
+#define TI_SRAM_SCRATCH_BOARD_EEPROM_START     CONFIG_SYS_K3_MCU_SCRATCHPAD_BASE
+
+#endif /* __ASM_ARCH_J721S2_HARDWARE_H */
diff --git a/arch/arm/mach-k3/include/mach/j721s2_spl.h b/arch/arm/mach-k3/include/mach/j721s2_spl.h
new file mode 100644 (file)
index 0000000..94b6c13
--- /dev/null
@@ -0,0 +1,46 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+ *     David Huang <d-huang@ti.com>
+ */
+#ifndef _ASM_ARCH_J721S2_SPL_H_
+#define _ASM_ARCH_J721S2_SPL_H_
+
+/* With BootMode B = 0 */
+#include <linux/bitops.h>
+#define BOOT_DEVICE_HYPERFLASH         0x00
+#define BOOT_DEVICE_OSPI               0x01
+#define BOOT_DEVICE_QSPI               0x02
+#define BOOT_DEVICE_SPI                        0x03
+#define BOOT_DEVICE_ETHERNET           0x04
+#define BOOT_DEVICE_I2C                        0x06
+#define BOOT_DEVICE_UART               0x07
+#define BOOT_DEVICE_NOR                        BOOT_DEVICE_HYPERFLASH
+
+/* With BootMode B = 1 */
+#define BOOT_DEVICE_MMC2               0x10
+#define BOOT_DEVICE_MMC1               0x11
+#define BOOT_DEVICE_DFU                        0x12
+#define BOOT_DEVICE_UFS                        0x13
+#define BOOT_DEVIE_GPMC                        0x14
+#define BOOT_DEVICE_PCIE               0x15
+#define BOOT_DEVICE_XSPI               0x16
+#define BOOT_DEVICE_RAM                        0x17
+#define BOOT_DEVICE_MMC2_2             0xFF /* Invalid value */
+
+/* Backup boot modes with MCU Only = 0 */
+#define BACKUP_BOOT_DEVICE_RAM         0x0
+#define BACKUP_BOOT_DEVICE_USB         0x1
+#define BACKUP_BOOT_DEVICE_UART                0x3
+#define BACKUP_BOOT_DEVICE_ETHERNET    0x4
+#define BACKUP_BOOT_DEVICE_MMC2                0x5
+#define BACKUP_BOOT_DEVICE_SPI         0x6
+#define BACKUP_BOOT_DEVICE_I2C         0x7
+
+#define BOOT_MODE_B_SHIFT              4
+#define BOOT_MODE_B_MASK               BIT(4)
+
+#define K3_PRIMARY_BOOTMODE            0x0
+#define K3_BACKUP_BOOTMODE             0x1
+
+#endif
index ef1c3fb8cae6f6eebafb79b7beac4f361eafdde1..8a61398529567b2d0ea8472dca8109b0aabb8d65 100644 (file)
 #include "j721e_spl.h"
 #endif
 
+#ifdef CONFIG_SOC_K3_J721S2
+#include "j721s2_spl.h"
+#endif
+
 #ifdef CONFIG_SOC_K3_AM642
 #include "am64_spl.h"
 #endif
diff --git a/arch/arm/mach-k3/j721s2/Makefile b/arch/arm/mach-k3/j721s2/Makefile
new file mode 100644 (file)
index 0000000..7bcd490
--- /dev/null
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier:     GPL-2.0+
+#
+# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+obj-y += clk-data.o
+obj-y += dev-data.o
diff --git a/arch/arm/mach-k3/j721s2/clk-data.c b/arch/arm/mach-k3/j721s2/clk-data.c
new file mode 100644 (file)
index 0000000..ad6bd99
--- /dev/null
@@ -0,0 +1,403 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * J721S2 specific clock platform data
+ *
+ * This file is auto generated. Please do not hand edit and report any issues
+ * to Dave Gerlach <d-gerlach@ti.com>.
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <linux/clk-provider.h>
+#include "k3-clk.h"
+
+static const char * const gluelogic_hfosc0_clkout_parents[] = {
+       "osc_19_2_mhz",
+       "osc_20_mhz",
+       "osc_24_mhz",
+       "osc_25_mhz",
+       "osc_26_mhz",
+       "osc_27_mhz",
+};
+
+static const char * const mcu_ospi0_iclk_sel_out0_parents[] = {
+       "board_0_mcu_ospi0_dqs_out",
+       "fss_mcu_0_ospi_0_ospi_oclk_clk",
+};
+
+static const char * const mcu_ospi1_iclk_sel_out0_parents[] = {
+       "board_0_mcu_ospi1_dqs_out",
+       "fss_mcu_0_ospi_1_ospi_oclk_clk",
+};
+
+static const char * const wkup_fref_clksel_out0_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       NULL,
+};
+
+static const char * const main_pll_hfosc_sel_out1_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const k3_pll_ctrl_wrap_wkup_0_sysclkout_clk_parents[] = {
+       "wkup_fref_clksel_out0",
+       "hsdiv1_16fft_mcu_0_hsdivout0_clk",
+};
+
+static const char * const mcu_ospi_ref_clk_sel_out0_parents[] = {
+       "hsdiv4_16fft_mcu_1_hsdivout4_clk",
+       "hsdiv4_16fft_mcu_2_hsdivout4_clk",
+};
+
+static const char * const mcu_ospi_ref_clk_sel_out1_parents[] = {
+       "hsdiv4_16fft_mcu_1_hsdivout4_clk",
+       "hsdiv4_16fft_mcu_2_hsdivout4_clk",
+};
+
+static const char * const mcu_usart_clksel_out0_parents[] = {
+       "hsdiv4_16fft_mcu_1_hsdivout3_clk",
+       "postdiv3_16fft_main_1_hsdivout5_clk",
+};
+
+static const char * const wkup_i2c_mcupll_bypass_out0_parents[] = {
+       "hsdiv4_16fft_mcu_1_hsdivout3_clk",
+       "gluelogic_hfosc0_clkout",
+};
+
+static const char * const main_pll_hfosc_sel_out0_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const main_pll_hfosc_sel_out12_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const main_pll_hfosc_sel_out19_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const main_pll_hfosc_sel_out2_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const main_pll_hfosc_sel_out26_0_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const main_pll_hfosc_sel_out3_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const main_pll_hfosc_sel_out7_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const main_pll_hfosc_sel_out8_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const usb0_refclk_sel_out0_parents[] = {
+       "gluelogic_hfosc0_clkout",
+       "board_0_hfosc1_clk_out",
+};
+
+static const char * const emmcsd1_lb_clksel_out0_parents[] = {
+       "board_0_mmc1_clklb_out",
+       "board_0_mmc1_clk_out",
+};
+
+static const char * const mcu_clkout_mux_out0_parents[] = {
+       "hsdiv4_16fft_mcu_2_hsdivout0_clk",
+       "hsdiv4_16fft_mcu_2_hsdivout0_clk",
+};
+
+static const char * const k3_pll_ctrl_wrap_main_0_sysclkout_clk_parents[] = {
+       "main_pll_hfosc_sel_out0",
+       "hsdiv4_16fft_main_0_hsdivout0_clk",
+};
+
+static const char * const dpi0_ext_clksel_out0_parents[] = {
+       "hsdiv1_16fft_main_19_hsdivout0_clk",
+       "board_0_vout0_extpclkin_out",
+};
+
+static const char * const emmcsd_refclk_sel_out0_parents[] = {
+       "hsdiv4_16fft_main_0_hsdivout2_clk",
+       "hsdiv4_16fft_main_1_hsdivout2_clk",
+       "hsdiv4_16fft_main_2_hsdivout2_clk",
+       "hsdiv4_16fft_main_3_hsdivout2_clk",
+};
+
+static const char * const emmcsd_refclk_sel_out1_parents[] = {
+       "hsdiv4_16fft_main_0_hsdivout2_clk",
+       "hsdiv4_16fft_main_1_hsdivout2_clk",
+       "hsdiv4_16fft_main_2_hsdivout2_clk",
+       "hsdiv4_16fft_main_3_hsdivout2_clk",
+};
+
+static const char * const gtc_clk_mux_out0_parents[] = {
+       "hsdiv4_16fft_main_3_hsdivout1_clk",
+       "postdiv3_16fft_main_0_hsdivout6_clk",
+       "board_0_mcu_cpts0_rft_clk_out",
+       "board_0_cpts0_rft_clk_out",
+       "board_0_mcu_ext_refclk0_out",
+       "board_0_ext_refclk1_out",
+       NULL,
+       NULL,
+       NULL,
+       NULL,
+       NULL,
+       NULL,
+       NULL,
+       NULL,
+       "hsdiv4_16fft_mcu_2_hsdivout1_clk",
+       "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk",
+};
+
+static const struct clk_data clk_list[] = {
+       CLK_FIXED_RATE("osc_27_mhz", 27000000, 0),
+       CLK_FIXED_RATE("osc_26_mhz", 26000000, 0),
+       CLK_FIXED_RATE("osc_25_mhz", 25000000, 0),
+       CLK_FIXED_RATE("osc_24_mhz", 24000000, 0),
+       CLK_FIXED_RATE("osc_20_mhz", 20000000, 0),
+       CLK_FIXED_RATE("osc_19_2_mhz", 19200000, 0),
+       CLK_MUX("gluelogic_hfosc0_clkout", gluelogic_hfosc0_clkout_parents, 6, 0x43000030, 0, 3, 0),
+       CLK_FIXED_RATE("board_0_hfosc1_clk_out", 0, 0),
+       CLK_FIXED_RATE("board_0_mcu_ospi0_dqs_out", 0, 0),
+       CLK_FIXED_RATE("board_0_mcu_ospi1_dqs_out", 0, 0),
+       CLK_FIXED_RATE("board_0_wkup_i2c0_scl_out", 0, 0),
+       CLK_FIXED_RATE("fss_mcu_0_hyperbus1p0_0_hpb_out_clk_n", 0, 0),
+       CLK_FIXED_RATE("fss_mcu_0_hyperbus1p0_0_hpb_out_clk_p", 0, 0),
+       CLK_FIXED_RATE("fss_mcu_0_ospi_0_ospi_oclk_clk", 0, 0),
+       CLK_FIXED_RATE("fss_mcu_0_ospi_1_ospi_oclk_clk", 0, 0),
+       CLK_MUX("mcu_ospi0_iclk_sel_out0", mcu_ospi0_iclk_sel_out0_parents, 2, 0x40f08030, 4, 1, 0),
+       CLK_MUX("mcu_ospi1_iclk_sel_out0", mcu_ospi1_iclk_sel_out0_parents, 2, 0x40f08034, 4, 1, 0),
+       CLK_FIXED_RATE("mshsi2c_wkup_0_porscl", 0, 0),
+       CLK_MUX("wkup_fref_clksel_out0", wkup_fref_clksel_out0_parents, 2, 0x43008050, 8, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out1", main_pll_hfosc_sel_out1_parents, 2, 0x43008084, 0, 1, 0),
+       CLK_PLL_DEFFREQ("pllfracf2_ssmod_16fft_main_1_foutvcop_clk", "main_pll_hfosc_sel_out1", 0x681000, 0, 1920000000),
+       CLK_DIV("pllfracf2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", "pllfracf2_ssmod_16fft_main_1_foutvcop_clk", 0x681038, 16, 3, 0, CLK_DIVIDER_ONE_BASED),
+       CLK_DIV("pllfracf2_ssmod_16fft_main_1_foutpostdiv_clk", "pllfracf2_ssmod_16fft_main_1_foutpostdiv_clk_subdiv", 0x681038, 24, 3, 0, CLK_DIVIDER_ONE_BASED),
+       CLK_PLL("pllfracf2_ssmod_16fft_mcu_0_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d00000, 0),
+       CLK_PLL_DEFFREQ("pllfracf2_ssmod_16fft_mcu_1_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d01000, 0, 2400000000),
+       CLK_PLL_DEFFREQ("pllfracf2_ssmod_16fft_mcu_2_foutvcop_clk", "wkup_fref_clksel_out0", 0x40d02000, 0, 2000000000),
+       CLK_DIV("postdiv3_16fft_main_1_hsdivout5_clk", "pllfracf2_ssmod_16fft_main_1_foutpostdiv_clk", 0x681094, 0, 7, 0, 0),
+       CLK_DIV("hsdiv1_16fft_mcu_0_hsdivout0_clk", "pllfracf2_ssmod_16fft_mcu_0_foutvcop_clk", 0x40d00080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout3_clk", "pllfracf2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d0108c, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_mcu_1_hsdivout4_clk", "pllfracf2_ssmod_16fft_mcu_1_foutvcop_clk", 0x40d01090, 0, 7, 0, 0),
+       CLK_DIV_DEFFREQ("hsdiv4_16fft_mcu_2_hsdivout4_clk", "pllfracf2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02090, 0, 7, 0, 0, 166666666),
+       CLK_MUX_PLLCTRL("k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", k3_pll_ctrl_wrap_wkup_0_sysclkout_clk_parents, 2, 0x42010000, 0),
+       CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x42010118, 0, 5, 0, 0),
+       CLK_MUX("mcu_ospi_ref_clk_sel_out0", mcu_ospi_ref_clk_sel_out0_parents, 2, 0x40f08030, 0, 1, 0),
+       CLK_MUX("mcu_ospi_ref_clk_sel_out1", mcu_ospi_ref_clk_sel_out1_parents, 2, 0x40f08034, 0, 1, 0),
+       CLK_MUX("mcu_usart_clksel_out0", mcu_usart_clksel_out0_parents, 2, 0x40f081c0, 0, 1, 0),
+       CLK_MUX("wkup_i2c_mcupll_bypass_out0", wkup_i2c_mcupll_bypass_out0_parents, 2, 0x43008060, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out0", main_pll_hfosc_sel_out0_parents, 2, 0x43008080, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out12", main_pll_hfosc_sel_out12_parents, 2, 0x430080b0, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out19", main_pll_hfosc_sel_out19_parents, 2, 0x430080cc, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out2", main_pll_hfosc_sel_out2_parents, 2, 0x43008088, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out26_0", main_pll_hfosc_sel_out26_0_parents, 2, 0x430080e8, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out3", main_pll_hfosc_sel_out3_parents, 2, 0x4300808c, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out7", main_pll_hfosc_sel_out7_parents, 2, 0x4300809c, 0, 1, 0),
+       CLK_MUX("main_pll_hfosc_sel_out8", main_pll_hfosc_sel_out8_parents, 2, 0x430080a0, 0, 1, 0),
+       CLK_MUX("usb0_refclk_sel_out0", usb0_refclk_sel_out0_parents, 2, 0x1080e0, 0, 1, 0),
+       CLK_FIXED_RATE("board_0_cpts0_rft_clk_out", 0, 0),
+       CLK_FIXED_RATE("board_0_ddr0_ckn_out", 0, 0),
+       CLK_FIXED_RATE("board_0_ddr0_ckp_out", 0, 0),
+       CLK_FIXED_RATE("board_0_ddr1_ckn_out", 0, 0),
+       CLK_FIXED_RATE("board_0_ddr1_ckp_out", 0, 0),
+       CLK_FIXED_RATE("board_0_ext_refclk1_out", 0, 0),
+       CLK_FIXED_RATE("board_0_mcu_cpts0_rft_clk_out", 0, 0),
+       CLK_FIXED_RATE("board_0_mcu_ext_refclk0_out", 0, 0),
+       CLK_FIXED_RATE("board_0_mmc1_clklb_out", 0, 0),
+       CLK_FIXED_RATE("board_0_mmc1_clk_out", 0, 0),
+       CLK_FIXED_RATE("board_0_vout0_extpclkin_out", 0, 0),
+       CLK_FIXED_RATE("emmc8ss_16ffc_main_0_emmcss_io_clk", 0, 0),
+       CLK_FIXED_RATE("emmcsd4ss_main_0_emmcsdss_io_clk_o", 0, 0),
+       CLK_DIV_DEFFREQ("hsdiv4_16fft_main_1_hsdivout0_clk", "pllfracf2_ssmod_16fft_main_1_foutvcop_clk", 0x681080, 0, 7, 0, 0, 192000000),
+       CLK_DIV("hsdiv4_16fft_main_1_hsdivout2_clk", "pllfracf2_ssmod_16fft_main_1_foutvcop_clk", 0x681088, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout0_clk", "pllfracf2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_mcu_2_hsdivout1_clk", "pllfracf2_ssmod_16fft_mcu_2_foutvcop_clk", 0x40d02084, 0, 7, 0, 0),
+       CLK_FIXED_RATE("j7am_ddr_ew_wrap_dv_wrap_main_0_ddrss_io_ck", 0, 0),
+       CLK_FIXED_RATE("j7am_ddr_ew_wrap_dv_wrap_main_0_ddrss_io_ck_n", 0, 0),
+       CLK_FIXED_RATE("j7am_ddr_ew_wrap_dv_wrap_main_1_ddrss_io_ck", 0, 0),
+       CLK_FIXED_RATE("j7am_ddr_ew_wrap_dv_wrap_main_1_ddrss_io_ck_n", 0, 0),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_0_foutvcop_clk", "main_pll_hfosc_sel_out0", 0x680000, 0),
+       CLK_DIV("pllfracf2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", "pllfracf2_ssmod_16fft_main_0_foutvcop_clk", 0x680038, 16, 3, 0, CLK_DIVIDER_ONE_BASED),
+       CLK_DIV("pllfracf2_ssmod_16fft_main_0_foutpostdiv_clk", "pllfracf2_ssmod_16fft_main_0_foutpostdiv_clk_subdiv", 0x680038, 24, 3, 0, CLK_DIVIDER_ONE_BASED),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_12_foutvcop_clk", "main_pll_hfosc_sel_out12", 0x68c000, 0),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_19_foutvcop_clk", "main_pll_hfosc_sel_out19", 0x693000, 0),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_2_foutvcop_clk", "main_pll_hfosc_sel_out2", 0x682000, 0),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_26_foutvcop_clk", "main_pll_hfosc_sel_out26_0", 0x69a000, 0),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_3_foutvcop_clk", "main_pll_hfosc_sel_out3", 0x683000, 0),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_7_foutvcop_clk", "main_pll_hfosc_sel_out7", 0x687000, 0),
+       CLK_PLL("pllfracf2_ssmod_16fft_main_8_foutvcop_clk", "main_pll_hfosc_sel_out8", 0x688000, 0),
+       CLK_DIV("postdiv3_16fft_main_0_hsdivout6_clk", "pllfracf2_ssmod_16fft_main_0_foutpostdiv_clk", 0x680098, 0, 7, 0, 0),
+       CLK_DIV("postdiv3_16fft_main_0_hsdivout8_clk", "pllfracf2_ssmod_16fft_main_0_foutpostdiv_clk", 0x6800a0, 0, 7, 0, 0),
+       CLK_DIV("postdiv3_16fft_main_1_hsdivout7_clk", "pllfracf2_ssmod_16fft_main_1_foutpostdiv_clk", 0x68109c, 0, 7, 0, 0),
+       CLK_MUX("emmcsd1_lb_clksel_out0", emmcsd1_lb_clksel_out0_parents, 2, 0x1080b4, 16, 1, 0),
+       CLK_MUX("mcu_clkout_mux_out0", mcu_clkout_mux_out0_parents, 2, 0x40f08010, 0, 1, 0),
+       CLK_DIV_DEFFREQ("usart_programmable_clock_divider_out0", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081c0, 0, 2, 0, 0, 48000000),
+       CLK_DIV("usart_programmable_clock_divider_out8", "hsdiv4_16fft_main_1_hsdivout0_clk", 0x1081e0, 0, 2, 0, 0),
+       CLK_DIV("hsdiv0_16fft_main_12_hsdivout0_clk", "pllfracf2_ssmod_16fft_main_12_foutvcop_clk", 0x68c080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv0_16fft_main_26_hsdivout0_clk", "pllfracf2_ssmod_16fft_main_26_foutvcop_clk", 0x69a080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv0_16fft_main_7_hsdivout0_clk", "pllfracf2_ssmod_16fft_main_7_foutvcop_clk", 0x687080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv0_16fft_main_8_hsdivout0_clk", "pllfracf2_ssmod_16fft_main_8_foutvcop_clk", 0x688080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv1_16fft_main_19_hsdivout0_clk", "pllfracf2_ssmod_16fft_main_19_foutvcop_clk", 0x693080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_main_0_hsdivout0_clk", "pllfracf2_ssmod_16fft_main_0_foutvcop_clk", 0x680080, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_main_0_hsdivout2_clk", "pllfracf2_ssmod_16fft_main_0_foutvcop_clk", 0x680088, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_main_0_hsdivout3_clk", "pllfracf2_ssmod_16fft_main_0_foutvcop_clk", 0x68008c, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_main_0_hsdivout4_clk", "pllfracf2_ssmod_16fft_main_0_foutvcop_clk", 0x680090, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_main_2_hsdivout2_clk", "pllfracf2_ssmod_16fft_main_2_foutvcop_clk", 0x682088, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_main_3_hsdivout1_clk", "pllfracf2_ssmod_16fft_main_3_foutvcop_clk", 0x683084, 0, 7, 0, 0),
+       CLK_DIV("hsdiv4_16fft_main_3_hsdivout2_clk", "pllfracf2_ssmod_16fft_main_3_foutvcop_clk", 0x683088, 0, 7, 0, 0),
+       CLK_MUX_PLLCTRL("k3_pll_ctrl_wrap_main_0_sysclkout_clk", k3_pll_ctrl_wrap_main_0_sysclkout_clk_parents, 2, 0x410000, 0),
+       CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x410118, 0, 5, 0, 0),
+       CLK_MUX("dpi0_ext_clksel_out0", dpi0_ext_clksel_out0_parents, 2, 0x108300, 0, 1, 0),
+       CLK_MUX("emmcsd_refclk_sel_out0", emmcsd_refclk_sel_out0_parents, 4, 0x1080b0, 0, 2, 0),
+       CLK_MUX("emmcsd_refclk_sel_out1", emmcsd_refclk_sel_out1_parents, 4, 0x1080b4, 0, 2, 0),
+       CLK_MUX("gtc_clk_mux_out0", gtc_clk_mux_out0_parents, 16, 0x108030, 0, 4, 0),
+       CLK_DIV("k3_pll_ctrl_wrap_main_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_main_0_sysclkout_clk", 0x41011c, 0, 5, 0, 0),
+       CLK_DIV("k3_pll_ctrl_wrap_wkup_0_chip_div24_clk_clk", "k3_pll_ctrl_wrap_wkup_0_sysclkout_clk", 0x4201011c, 0, 5, 0, 0),
+};
+
+static const struct dev_clk soc_dev_clk_data[] = {
+       DEV_CLK(4, 0, "hsdiv0_16fft_main_8_hsdivout0_clk"),
+       DEV_CLK(4, 1, "hsdiv0_16fft_main_7_hsdivout0_clk"),
+       DEV_CLK(4, 2, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(43, 0, "postdiv3_16fft_main_0_hsdivout8_clk"),
+       DEV_CLK(43, 1, "hsdiv4_16fft_main_0_hsdivout3_clk"),
+       DEV_CLK(43, 2, "gluelogic_hfosc0_clkout"),
+       DEV_CLK(43, 3, "board_0_hfosc1_clk_out"),
+       DEV_CLK(43, 5, "hsdiv4_16fft_main_0_hsdivout2_clk"),
+       DEV_CLK(43, 6, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(43, 7, "board_0_hfosc1_clk_out"),
+       DEV_CLK(43, 9, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(43, 10, "hsdiv4_16fft_main_0_hsdivout4_clk"),
+       DEV_CLK(43, 11, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(43, 12, "gluelogic_hfosc0_clkout"),
+       DEV_CLK(61, 0, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(61, 1, "gtc_clk_mux_out0"),
+       DEV_CLK(61, 2, "hsdiv4_16fft_main_3_hsdivout1_clk"),
+       DEV_CLK(61, 3, "postdiv3_16fft_main_0_hsdivout6_clk"),
+       DEV_CLK(61, 4, "board_0_mcu_cpts0_rft_clk_out"),
+       DEV_CLK(61, 5, "board_0_cpts0_rft_clk_out"),
+       DEV_CLK(61, 6, "board_0_mcu_ext_refclk0_out"),
+       DEV_CLK(61, 7, "board_0_ext_refclk1_out"),
+       DEV_CLK(61, 16, "hsdiv4_16fft_mcu_2_hsdivout1_clk"),
+       DEV_CLK(61, 17, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(98, 1, "emmcsd_refclk_sel_out0"),
+       DEV_CLK(98, 2, "hsdiv4_16fft_main_0_hsdivout2_clk"),
+       DEV_CLK(98, 3, "hsdiv4_16fft_main_1_hsdivout2_clk"),
+       DEV_CLK(98, 4, "hsdiv4_16fft_main_2_hsdivout2_clk"),
+       DEV_CLK(98, 5, "hsdiv4_16fft_main_3_hsdivout2_clk"),
+       DEV_CLK(98, 6, "emmcsd1_lb_clksel_out0"),
+       DEV_CLK(98, 7, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(99, 1, "emmcsd_refclk_sel_out1"),
+       DEV_CLK(99, 2, "hsdiv4_16fft_main_0_hsdivout2_clk"),
+       DEV_CLK(99, 3, "hsdiv4_16fft_main_1_hsdivout2_clk"),
+       DEV_CLK(99, 4, "hsdiv4_16fft_main_2_hsdivout2_clk"),
+       DEV_CLK(99, 5, "hsdiv4_16fft_main_3_hsdivout2_clk"),
+       DEV_CLK(99, 7, "emmcsd4ss_main_0_emmcsdss_io_clk_o"),
+       DEV_CLK(99, 8, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(108, 1, "hsdiv4_16fft_mcu_2_hsdivout4_clk"),
+       DEV_CLK(108, 2, "hsdiv4_16fft_mcu_2_hsdivout4_clk"),
+       DEV_CLK(108, 3, "hsdiv4_16fft_mcu_2_hsdivout4_clk"),
+       DEV_CLK(108, 6, "hsdiv4_16fft_mcu_2_hsdivout4_clk"),
+       DEV_CLK(108, 11, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(109, 0, "mcu_ospi0_iclk_sel_out0"),
+       DEV_CLK(109, 1, "board_0_mcu_ospi0_dqs_out"),
+       DEV_CLK(109, 2, "fss_mcu_0_ospi_0_ospi_oclk_clk"),
+       DEV_CLK(109, 3, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(109, 5, "mcu_ospi_ref_clk_sel_out0"),
+       DEV_CLK(109, 6, "hsdiv4_16fft_mcu_1_hsdivout4_clk"),
+       DEV_CLK(109, 7, "hsdiv4_16fft_mcu_2_hsdivout4_clk"),
+       DEV_CLK(109, 8, "board_0_mcu_ospi0_dqs_out"),
+       DEV_CLK(109, 9, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(110, 0, "mcu_ospi1_iclk_sel_out0"),
+       DEV_CLK(110, 1, "board_0_mcu_ospi1_dqs_out"),
+       DEV_CLK(110, 2, "fss_mcu_0_ospi_1_ospi_oclk_clk"),
+       DEV_CLK(110, 3, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(110, 5, "mcu_ospi_ref_clk_sel_out1"),
+       DEV_CLK(110, 6, "hsdiv4_16fft_mcu_1_hsdivout4_clk"),
+       DEV_CLK(110, 7, "hsdiv4_16fft_mcu_2_hsdivout4_clk"),
+       DEV_CLK(110, 8, "board_0_mcu_ospi1_dqs_out"),
+       DEV_CLK(110, 9, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(115, 0, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(126, 0, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(126, 1, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(138, 0, "hsdiv0_16fft_main_12_hsdivout0_clk"),
+       DEV_CLK(138, 1, "hsdiv0_16fft_main_7_hsdivout0_clk"),
+       DEV_CLK(138, 2, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(138, 3, "board_0_ddr0_ckn_out"),
+       DEV_CLK(138, 5, "board_0_ddr0_ckp_out"),
+       DEV_CLK(138, 7, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(139, 0, "hsdiv0_16fft_main_26_hsdivout0_clk"),
+       DEV_CLK(139, 1, "hsdiv0_16fft_main_7_hsdivout0_clk"),
+       DEV_CLK(139, 2, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(139, 3, "board_0_ddr1_ckn_out"),
+       DEV_CLK(139, 5, "board_0_ddr1_ckp_out"),
+       DEV_CLK(139, 7, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(143, 0, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(143, 1, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(146, 2, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(146, 3, "usart_programmable_clock_divider_out0"),
+       DEV_CLK(149, 2, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(149, 3, "mcu_usart_clksel_out0"),
+       DEV_CLK(149, 4, "hsdiv4_16fft_mcu_1_hsdivout3_clk"),
+       DEV_CLK(149, 5, "postdiv3_16fft_main_1_hsdivout5_clk"),
+       DEV_CLK(157, 9, "emmcsd4ss_main_0_emmcsdss_io_clk_o"),
+       DEV_CLK(157, 103, "fss_mcu_0_ospi_0_ospi_oclk_clk"),
+       DEV_CLK(157, 104, "j7am_ddr_ew_wrap_dv_wrap_main_0_ddrss_io_ck"),
+       DEV_CLK(157, 111, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(157, 174, "j7am_ddr_ew_wrap_dv_wrap_main_1_ddrss_io_ck"),
+       DEV_CLK(157, 177, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(157, 179, "fss_mcu_0_ospi_0_ospi_oclk_clk"),
+       DEV_CLK(157, 182, "mshsi2c_wkup_0_porscl"),
+       DEV_CLK(157, 187, "fss_mcu_0_ospi_1_ospi_oclk_clk"),
+       DEV_CLK(157, 194, "emmcsd4ss_main_0_emmcsdss_io_clk_o"),
+       DEV_CLK(157, 197, "j7am_ddr_ew_wrap_dv_wrap_main_0_ddrss_io_ck_n"),
+       DEV_CLK(157, 208, "j7am_ddr_ew_wrap_dv_wrap_main_1_ddrss_io_ck_n"),
+       DEV_CLK(157, 214, "fss_mcu_0_hyperbus1p0_0_hpb_out_clk_p"),
+       DEV_CLK(157, 221, "mcu_clkout_mux_out0"),
+       DEV_CLK(157, 222, "hsdiv4_16fft_mcu_2_hsdivout0_clk"),
+       DEV_CLK(157, 223, "hsdiv4_16fft_mcu_2_hsdivout0_clk"),
+       DEV_CLK(157, 225, "emmc8ss_16ffc_main_0_emmcss_io_clk"),
+       DEV_CLK(157, 231, "fss_mcu_0_hyperbus1p0_0_hpb_out_clk_n"),
+       DEV_CLK(157, 352, "dpi0_ext_clksel_out0"),
+       DEV_CLK(180, 0, "gluelogic_hfosc0_clkout"),
+       DEV_CLK(180, 2, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(202, 0, "hsdiv0_16fft_main_8_hsdivout0_clk"),
+       DEV_CLK(203, 0, "hsdiv0_16fft_main_8_hsdivout0_clk"),
+       DEV_CLK(223, 1, "wkup_i2c_mcupll_bypass_out0"),
+       DEV_CLK(223, 2, "hsdiv4_16fft_mcu_1_hsdivout3_clk"),
+       DEV_CLK(223, 3, "gluelogic_hfosc0_clkout"),
+       DEV_CLK(223, 4, "k3_pll_ctrl_wrap_wkup_0_chip_div1_clk_clk"),
+       DEV_CLK(223, 5, "board_0_wkup_i2c0_scl_out"),
+       DEV_CLK(357, 2, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(357, 3, "usart_programmable_clock_divider_out8"),
+       DEV_CLK(360, 4, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(360, 13, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(360, 15, "postdiv3_16fft_main_1_hsdivout7_clk"),
+       DEV_CLK(360, 16, "usb0_refclk_sel_out0"),
+       DEV_CLK(360, 17, "gluelogic_hfosc0_clkout"),
+       DEV_CLK(360, 18, "board_0_hfosc1_clk_out"),
+       DEV_CLK(360, 22, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+       DEV_CLK(360, 23, "k3_pll_ctrl_wrap_main_0_chip_div1_clk_clk"),
+};
+
+const struct ti_k3_clk_platdata j721s2_clk_platdata = {
+       .clk_list = clk_list,
+       .clk_list_cnt = 104,
+       .soc_dev_clk_data = soc_dev_clk_data,
+       .soc_dev_clk_data_cnt = 122,
+};
diff --git a/arch/arm/mach-k3/j721s2/dev-data.c b/arch/arm/mach-k3/j721s2/dev-data.c
new file mode 100644 (file)
index 0000000..e36f1ed
--- /dev/null
@@ -0,0 +1,85 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * J721S2 specific device platform data
+ *
+ * This file is auto generated. Please do not hand edit and report any issues
+ * to Dave Gerlach <d-gerlach@ti.com>.
+ *
+ * Copyright (C) 2020-2021 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-dev.h"
+
+static struct ti_psc soc_psc_list[] = {
+       [0] = PSC(0, 0x42000000),
+       [1] = PSC(1, 0x00400000),
+};
+
+static struct ti_pd soc_pd_list[] = {
+       [0] = PSC_PD(0, &soc_psc_list[0], NULL),
+       [1] = PSC_PD(0, &soc_psc_list[1], NULL),
+       [2] = PSC_PD(1, &soc_psc_list[1], &soc_pd_list[1]),
+       [3] = PSC_PD(14, &soc_psc_list[1], NULL),
+       [4] = PSC_PD(15, &soc_psc_list[1], &soc_pd_list[3]),
+       [5] = PSC_PD(16, &soc_psc_list[1], &soc_pd_list[3]),
+};
+
+static struct ti_lpsc soc_lpsc_list[] = {
+       [0] = PSC_LPSC(0, &soc_psc_list[0], &soc_pd_list[0], NULL),
+       [1] = PSC_LPSC(3, &soc_psc_list[0], &soc_pd_list[0], NULL),
+       [2] = PSC_LPSC(10, &soc_psc_list[0], &soc_pd_list[0], NULL),
+       [3] = PSC_LPSC(11, &soc_psc_list[0], &soc_pd_list[0], NULL),
+       [4] = PSC_LPSC(12, &soc_psc_list[0], &soc_pd_list[0], NULL),
+       [5] = PSC_LPSC(0, &soc_psc_list[1], &soc_pd_list[1], NULL),
+       [6] = PSC_LPSC(9, &soc_psc_list[1], &soc_pd_list[1], &soc_lpsc_list[2]),
+       [7] = PSC_LPSC(14, &soc_psc_list[1], &soc_pd_list[1], &soc_lpsc_list[8]),
+       [8] = PSC_LPSC(15, &soc_psc_list[1], &soc_pd_list[1], NULL),
+       [9] = PSC_LPSC(16, &soc_psc_list[1], &soc_pd_list[1], &soc_lpsc_list[10]),
+       [10] = PSC_LPSC(17, &soc_psc_list[1], &soc_pd_list[1], NULL),
+       [11] = PSC_LPSC(20, &soc_psc_list[1], &soc_pd_list[1], &soc_lpsc_list[4]),
+       [12] = PSC_LPSC(23, &soc_psc_list[1], &soc_pd_list[1], &soc_lpsc_list[4]),
+       [13] = PSC_LPSC(25, &soc_psc_list[1], &soc_pd_list[1], &soc_lpsc_list[4]),
+       [14] = PSC_LPSC(43, &soc_psc_list[1], &soc_pd_list[2], NULL),
+       [15] = PSC_LPSC(45, &soc_psc_list[1], &soc_pd_list[2], NULL),
+       [16] = PSC_LPSC(78, &soc_psc_list[1], &soc_pd_list[3], NULL),
+       [17] = PSC_LPSC(80, &soc_psc_list[1], &soc_pd_list[4], &soc_lpsc_list[16]),
+       [18] = PSC_LPSC(81, &soc_psc_list[1], &soc_pd_list[5], &soc_lpsc_list[16]),
+};
+
+static struct ti_dev soc_dev_list[] = {
+       PSC_DEV(108, &soc_lpsc_list[0]),
+       PSC_DEV(109, &soc_lpsc_list[0]),
+       PSC_DEV(110, &soc_lpsc_list[0]),
+       PSC_DEV(180, &soc_lpsc_list[0]),
+       PSC_DEV(149, &soc_lpsc_list[0]),
+       PSC_DEV(115, &soc_lpsc_list[1]),
+       PSC_DEV(223, &soc_lpsc_list[1]),
+       PSC_DEV(109, &soc_lpsc_list[2]),
+       PSC_DEV(110, &soc_lpsc_list[3]),
+       PSC_DEV(108, &soc_lpsc_list[4]),
+       PSC_DEV(43, &soc_lpsc_list[5]),
+       PSC_DEV(61, &soc_lpsc_list[6]),
+       PSC_DEV(96, &soc_lpsc_list[7]),
+       PSC_DEV(138, &soc_lpsc_list[8]),
+       PSC_DEV(97, &soc_lpsc_list[9]),
+       PSC_DEV(139, &soc_lpsc_list[10]),
+       PSC_DEV(360, &soc_lpsc_list[11]),
+       PSC_DEV(99, &soc_lpsc_list[12]),
+       PSC_DEV(98, &soc_lpsc_list[13]),
+       PSC_DEV(146, &soc_lpsc_list[14]),
+       PSC_DEV(357, &soc_lpsc_list[15]),
+       PSC_DEV(4, &soc_lpsc_list[16]),
+       PSC_DEV(202, &soc_lpsc_list[17]),
+       PSC_DEV(203, &soc_lpsc_list[18]),
+};
+
+const struct ti_k3_pd_platdata j721s2_pd_platdata = {
+       .psc = soc_psc_list,
+       .pd = soc_pd_list,
+       .lpsc = soc_lpsc_list,
+       .devs = soc_dev_list,
+       .num_psc = 2,
+       .num_pd = 6,
+       .num_lpsc = 19,
+       .num_devs = 24,
+};
diff --git a/arch/arm/mach-k3/j721s2_init.c b/arch/arm/mach-k3/j721s2_init.c
new file mode 100644 (file)
index 0000000..58a8654
--- /dev/null
@@ -0,0 +1,312 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * J721E: SoC specific initialization
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
+ *     David Huang <d-huang@ti.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <spl.h>
+#include <asm/io.h>
+#include <asm/armv7_mpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/sysfw-loader.h>
+#include "common.h"
+#include <asm/arch/sys_proto.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+#include <dm.h>
+#include <dm/uclass-internal.h>
+#include <dm/pinctrl.h>
+#include <mmc.h>
+#include <remoteproc.h>
+
+#ifdef CONFIG_SPL_BUILD
+
+static void ctrl_mmr_unlock(void)
+{
+       /* Unlock all WKUP_CTRL_MMR0 module registers */
+       mmr_unlock(WKUP_CTRL_MMR0_BASE, 0);
+       mmr_unlock(WKUP_CTRL_MMR0_BASE, 1);
+       mmr_unlock(WKUP_CTRL_MMR0_BASE, 2);
+       mmr_unlock(WKUP_CTRL_MMR0_BASE, 3);
+       mmr_unlock(WKUP_CTRL_MMR0_BASE, 4);
+       mmr_unlock(WKUP_CTRL_MMR0_BASE, 6);
+       mmr_unlock(WKUP_CTRL_MMR0_BASE, 7);
+
+       /* Unlock all MCU_CTRL_MMR0 module registers */
+       mmr_unlock(MCU_CTRL_MMR0_BASE, 0);
+       mmr_unlock(MCU_CTRL_MMR0_BASE, 1);
+       mmr_unlock(MCU_CTRL_MMR0_BASE, 2);
+       mmr_unlock(MCU_CTRL_MMR0_BASE, 3);
+       mmr_unlock(MCU_CTRL_MMR0_BASE, 4);
+
+       /* Unlock all CTRL_MMR0 module registers */
+       mmr_unlock(CTRL_MMR0_BASE, 0);
+       mmr_unlock(CTRL_MMR0_BASE, 1);
+       mmr_unlock(CTRL_MMR0_BASE, 2);
+       mmr_unlock(CTRL_MMR0_BASE, 3);
+       mmr_unlock(CTRL_MMR0_BASE, 5);
+       mmr_unlock(CTRL_MMR0_BASE, 7);
+}
+
+void k3_mmc_stop_clock(void)
+{
+       if (IS_ENABLED(CONFIG_K3_LOAD_SYSFW)) {
+               if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+                       struct mmc *mmc = find_mmc_device(0);
+
+                       if (!mmc)
+                               return;
+
+                       mmc->saved_clock = mmc->clock;
+                       mmc_set_clock(mmc, 0, true);
+               }
+       }
+}
+
+void k3_mmc_restart_clock(void)
+{
+       if (IS_ENABLED(CONFIG_K3_LOAD_SYSFW)) {
+               if (spl_boot_device() == BOOT_DEVICE_MMC1) {
+                       struct mmc *mmc = find_mmc_device(0);
+
+                       if (!mmc)
+                               return;
+
+                       mmc_set_clock(mmc, mmc->saved_clock, false);
+               }
+       }
+}
+
+/*
+ * This uninitialized global variable would normal end up in the .bss section,
+ * but the .bss is cleared between writing and reading this variable, so move
+ * it to the .data section.
+ */
+u32 bootindex __attribute__((section(".data")));
+static struct rom_extended_boot_data bootdata __section(".data");
+
+static void store_boot_info_from_rom(void)
+{
+       bootindex = *(u32 *)(CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX);
+       memcpy(&bootdata, (uintptr_t *)ROM_ENTENDED_BOOT_DATA_INFO,
+              sizeof(struct rom_extended_boot_data));
+}
+
+void board_init_f(ulong dummy)
+{
+       struct udevice *dev;
+       int ret;
+       /*
+        * Cannot delay this further as there is a chance that
+        * K3_BOOT_PARAM_TABLE_INDEX can be over written by SPL MALLOC section.
+        */
+       store_boot_info_from_rom();
+
+       /* Make all control module registers accessible */
+       ctrl_mmr_unlock();
+
+       if (IS_ENABLED(CONFIG_CPU_V7R)) {
+               disable_linefill_optimization();
+               setup_k3_mpu_regions();
+       }
+
+       /* Init DM early */
+       spl_early_init();
+
+       /* Prepare console output */
+       preloader_console_init();
+
+       if (IS_ENABLED(CONFIG_K3_LOAD_SYSFW)) {
+               /*
+                * Process pinctrl for the serial0 a.k.a. WKUP_UART0 module and continue
+                * regardless of the result of pinctrl. Do this without probing the
+                * device, but instead by searching the device that would request the
+                * given sequence number if probed. The UART will be used by the system
+                * firmware (SYSFW) image for various purposes and SYSFW depends on us
+                * to initialize its pin settings.
+                */
+               ret = uclass_find_device_by_seq(UCLASS_SERIAL, 0, &dev);
+               if (!ret)
+                       pinctrl_select_state(dev, "default");
+
+               /*
+                * Load, start up, and configure system controller firmware. Provide
+                * the U-Boot console init function to the SYSFW post-PM configuration
+                * callback hook, effectively switching on (or over) the console
+                * output.
+                */
+               k3_sysfw_loader(is_rom_loaded_sysfw(&bootdata),
+                               k3_mmc_stop_clock, k3_mmc_restart_clock);
+
+               if (IS_ENABLED(CONFIG_SPL_CLK_K3)) {
+                       /*
+                        * Force probe of clk_k3 driver here to ensure basic default clock
+                        * configuration is always done for enabling PM services.
+                        */
+                       ret = uclass_get_device_by_driver(UCLASS_CLK,
+                                                         DM_DRIVER_GET(ti_clk),
+                                                         &dev);
+                       if (ret)
+                               panic("Failed to initialize clk-k3!\n");
+               }
+       }
+
+       /* Output System Firmware version info */
+       k3_sysfw_print_ver();
+
+       if (IS_ENABLED(CONFIG_TARGET_J721S2_R5_EVM)) {
+               ret = uclass_get_device_by_name(UCLASS_MISC, "msmc", &dev);
+               if (ret)
+                       panic("Probe of msmc failed: %d\n", ret);
+
+               ret = uclass_get_device(UCLASS_RAM, 0, &dev);
+               if (ret)
+                       panic("DRAM 0 init failed: %d\n", ret);
+
+               ret = uclass_next_device(&dev);
+               if (ret)
+                       panic("DRAM 1 init failed: %d\n", ret);
+       }
+       spl_enable_dcache();
+}
+
+u32 spl_mmc_boot_mode(const u32 boot_device)
+{
+       switch (boot_device) {
+       case BOOT_DEVICE_MMC1:
+               return MMCSD_MODE_EMMCBOOT;
+       case BOOT_DEVICE_MMC2:
+               return MMCSD_MODE_FS;
+       default:
+               return MMCSD_MODE_RAW;
+       }
+}
+
+static u32 __get_backup_bootmedia(u32 main_devstat)
+{
+       u32 bkup_boot = (main_devstat & MAIN_DEVSTAT_BKUP_BOOTMODE_MASK) >>
+                       MAIN_DEVSTAT_BKUP_BOOTMODE_SHIFT;
+
+       switch (bkup_boot) {
+       case BACKUP_BOOT_DEVICE_USB:
+               return BOOT_DEVICE_DFU;
+       case BACKUP_BOOT_DEVICE_UART:
+               return BOOT_DEVICE_UART;
+       case BACKUP_BOOT_DEVICE_ETHERNET:
+               return BOOT_DEVICE_ETHERNET;
+       case BACKUP_BOOT_DEVICE_MMC2:
+       {
+               u32 port = (main_devstat & MAIN_DEVSTAT_BKUP_MMC_PORT_MASK) >>
+                           MAIN_DEVSTAT_BKUP_MMC_PORT_SHIFT;
+               if (port == 0x0)
+                       return BOOT_DEVICE_MMC1;
+               return BOOT_DEVICE_MMC2;
+       }
+       case BACKUP_BOOT_DEVICE_SPI:
+               return BOOT_DEVICE_SPI;
+       case BACKUP_BOOT_DEVICE_I2C:
+               return BOOT_DEVICE_I2C;
+       }
+
+       return BOOT_DEVICE_RAM;
+}
+
+static u32 __get_primary_bootmedia(u32 main_devstat, u32 wkup_devstat)
+{
+       u32 bootmode = (wkup_devstat & WKUP_DEVSTAT_PRIMARY_BOOTMODE_MASK) >>
+                       WKUP_DEVSTAT_PRIMARY_BOOTMODE_SHIFT;
+
+       bootmode |= (main_devstat & MAIN_DEVSTAT_BOOT_MODE_B_MASK) <<
+                       BOOT_MODE_B_SHIFT;
+
+       if (bootmode == BOOT_DEVICE_OSPI || bootmode == BOOT_DEVICE_QSPI ||
+           bootmode == BOOT_DEVICE_XSPI)
+               bootmode = BOOT_DEVICE_SPI;
+
+       if (bootmode == BOOT_DEVICE_MMC2) {
+               u32 port = (main_devstat &
+                           MAIN_DEVSTAT_PRIM_BOOTMODE_MMC_PORT_MASK) >>
+                          MAIN_DEVSTAT_PRIM_BOOTMODE_PORT_SHIFT;
+               if (port == 0x0)
+                       bootmode = BOOT_DEVICE_MMC1;
+       }
+
+       return bootmode;
+}
+
+u32 spl_boot_device(void)
+{
+       u32 wkup_devstat = readl(CTRLMMR_WKUP_DEVSTAT);
+       u32 main_devstat;
+
+       if (wkup_devstat & WKUP_DEVSTAT_MCU_OMLY_MASK) {
+               printf("ERROR: MCU only boot is not yet supported\n");
+               return BOOT_DEVICE_RAM;
+       }
+
+       /* MAIN CTRL MMR can only be read if MCU ONLY is 0 */
+       main_devstat = readl(CTRLMMR_MAIN_DEVSTAT);
+
+       if (bootindex == K3_PRIMARY_BOOTMODE)
+               return __get_primary_bootmedia(main_devstat, wkup_devstat);
+       else
+               return __get_backup_bootmedia(main_devstat);
+}
+#endif
+
+#define J721S2_DEV_MCU_RTI0                    295
+#define J721S2_DEV_MCU_RTI1                    296
+#define J721S2_DEV_MCU_ARMSS0_CPU0             284
+#define J721S2_DEV_MCU_ARMSS0_CPU1             285
+
+void release_resources_for_core_shutdown(void)
+{
+       if (IS_ENABLED(CONFIG_SYS_K3_SPL_ATF)) {
+               struct ti_sci_handle *ti_sci;
+               struct ti_sci_dev_ops *dev_ops;
+               struct ti_sci_proc_ops *proc_ops;
+               int ret;
+               u32 i;
+
+               const u32 put_device_ids[] = {
+                       J721S2_DEV_MCU_RTI0,
+                       J721S2_DEV_MCU_RTI1,
+               };
+
+               ti_sci = get_ti_sci_handle();
+               dev_ops = &ti_sci->ops.dev_ops;
+               proc_ops = &ti_sci->ops.proc_ops;
+
+               /* Iterate through list of devices to put (shutdown) */
+               for (i = 0; i < ARRAY_SIZE(put_device_ids); i++) {
+                       u32 id = put_device_ids[i];
+
+                       ret = dev_ops->put_device(ti_sci, id);
+                       if (ret)
+                               panic("Failed to put device %u (%d)\n", id, ret);
+               }
+
+               const u32 put_core_ids[] = {
+                       J721S2_DEV_MCU_ARMSS0_CPU1,
+                       J721S2_DEV_MCU_ARMSS0_CPU0,     /* Handle CPU0 after CPU1 */
+               };
+
+               /* Iterate through list of cores to put (shutdown) */
+               for (i = 0; i < ARRAY_SIZE(put_core_ids); i++) {
+                       u32 id = put_core_ids[i];
+
+                       /*
+                        * Queue up the core shutdown request. Note that this call
+                        * needs to be followed up by an actual invocation of an WFE
+                        * or WFI CPU instruction.
+                        */
+                       ret = proc_ops->proc_shutdown_no_wait(ti_sci, id);
+                       if (ret)
+                               panic("Failed sending core %u shutdown message (%d)\n",
+                                     id, ret);
+               }
+       }
+}
diff --git a/include/configs/j721s2_evm.h b/include/configs/j721s2_evm.h
new file mode 100644 (file)
index 0000000..6fd098c
--- /dev/null
@@ -0,0 +1,191 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Configuration header file for K3 J721S2 EVM
+ *
+ * Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
+ *     David Huang <d-huang@ti.com>
+ */
+
+#ifndef __CONFIG_J721S2_EVM_H
+#define __CONFIG_J721S2_EVM_H
+
+#include <linux/sizes.h>
+#include <config_distro_bootcmd.h>
+#include <environment/ti/mmc.h>
+#include <environment/ti/k3_rproc.h>
+#include <environment/ti/ufs.h>
+#include <environment/ti/k3_dfu.h>
+
+/* DDR Configuration */
+#define CONFIG_SYS_SDRAM_BASE1         0x880000000
+
+/* SPL Loader Configuration */
+#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SPL_TEXT_BASE +        \
+                                        CONFIG_SYS_K3_NON_SECURE_MSRAM_SIZE)
+#define CONFIG_SYS_UBOOT_BASE          0x50280000
+/* Image load address in RAM for DFU boot*/
+#else
+#define CONFIG_SYS_UBOOT_BASE          0x50080000
+/*
+ * Maximum size in memory allocated to the SPL BSS. Keep it as tight as
+ * possible (to allow the build to go through), as this directly affects
+ * our memory footprint. The less we use for BSS the more we have available
+ * for everything else.
+ */
+#define CONFIG_SPL_BSS_MAX_SIZE                0xA000
+/*
+ * Link BSS to be within SPL in a dedicated region located near the top of
+ * the MCU SRAM, this way making it available also before relocation. Note
+ * that we are not using the actual top of the MCU SRAM as there is a memory
+ * location filled in by the boot ROM that we want to read out without any
+ * interference from the C context.
+ */
+#define CONFIG_SPL_BSS_START_ADDR      (0x41c80000 -\
+                                        CONFIG_SPL_BSS_MAX_SIZE)
+/* Set the stack right below the SPL BSS section */
+#define CONFIG_SYS_INIT_SP_ADDR         CONFIG_SPL_BSS_START_ADDR
+/* Configure R5 SPL post-relocation malloc pool in DDR */
+#define CONFIG_SYS_SPL_MALLOC_START    0x84000000
+#define CONFIG_SYS_SPL_MALLOC_SIZE     SZ_16M
+/* Image load address in RAM for DFU boot*/
+#endif
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME        "tispl.bin"
+#endif
+
+#define CONFIG_SPL_MAX_SIZE            CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
+
+#define CONFIG_SYS_BOOTM_LEN           SZ_64M
+#define CONFIG_CQSPI_REF_CLK           133333333
+
+/* HyperFlash related configuration */
+#define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
+
+/* U-Boot general configuration */
+#define EXTRA_ENV_J721S2_BOARD_SETTINGS                                        \
+       "default_device_tree=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0"      \
+       "findfdt="                                                      \
+               "setenv name_fdt ${default_device_tree};"               \
+               "setenv fdtfile ${name_fdt}\0"                          \
+       "name_kern=Image\0"                                             \
+       "console=ttyS2,115200n8\0"                                      \
+       "args_all=setenv optargs earlycon=ns16550a,mmio32,0x02880000 "  \
+               "${mtdparts}\0"                                         \
+       "run_kern=booti ${loadaddr} ${rd_spec} ${fdtaddr}\0"
+
+#define PARTS_DEFAULT \
+       /* Linux partitions */ \
+       "uuid_disk=${uuid_gpt_disk};" \
+       "name=rootfs,start=0,size=-,uuid=${uuid_gpt_rootfs}\0"
+
+#ifdef CONFIG_SYS_K3_SPL_ATF
+#if defined(CONFIG_TARGET_J721S2_R5_EVM)
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                             \
+       "addr_mcur5f0_0load=0x89000000\0"                               \
+       "name_mcur5f0_0fw=/lib/firmware/j7-mcu-r5f0_0-fw\0"
+#elif defined(CONFIG_TARGET_J7200_R5_EVM)
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                             \
+       "addr_mcur5f0_0load=0x89000000\0"                               \
+       "name_mcur5f0_0fw=/lib/firmware/j7200-mcu-r5f0_0-fw\0"
+#endif /* CONFIG_TARGET_J721S2_R5_EVM */
+#else
+#define EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC ""
+#endif /* CONFIG_SYS_K3_SPL_ATF */
+
+/* U-Boot MMC-specific configuration */
+#define EXTRA_ENV_J721S2_BOARD_SETTINGS_MMC                            \
+       "boot=mmc\0"                                                    \
+       "mmcdev=1\0"                                                    \
+       "bootpart=1:2\0"                                                \
+       "bootdir=/boot\0"                                               \
+       EXTRA_ENV_R5_SPL_RPROC_FW_ARGS_MMC                              \
+       "rd_spec=-\0"                                                   \
+       "init_mmc=run args_all args_mmc\0"                              \
+       "get_fdt_mmc=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${name_fdt}\0" \
+       "get_overlay_mmc="                                              \
+               "fdt address ${fdtaddr};"                               \
+               "fdt resize 0x100000;"                                  \
+               "for overlay in $name_overlays;"                        \
+               "do;"                                                   \
+               "load mmc ${bootpart} ${dtboaddr} ${bootdir}/${overlay} && "    \
+               "fdt apply ${dtboaddr};"                                \
+               "done;\0"                                               \
+       "partitions=" PARTS_DEFAULT                                     \
+       "get_kern_mmc=load mmc ${bootpart} ${loadaddr} "                \
+               "${bootdir}/${name_kern}\0"                             \
+       "get_fit_mmc=load mmc ${bootpart} ${addr_fit} "                 \
+               "${bootdir}/${name_fit}\0"                              \
+       "partitions=" PARTS_DEFAULT
+
+/* Set the default list of remote processors to boot */
+#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#ifdef DEFAULT_RPROCS
+#undef DEFAULT_RPROCS
+#endif
+#endif
+
+#ifdef CONFIG_TARGET_J721S2_A72_EVM
+#define DEFAULT_RPROCS ""                                              \
+               "2 /lib/firmware/j721s2-main-r5f0_0-fw "                        \
+               "3 /lib/firmware/j721s2-main-r5f0_1-fw "                        \
+               "4 /lib/firmware/j721s2-main-r5f1_0-fw "                        \
+               "5 /lib/firmware/j721s2-main-r5f1_1-fw "                        \
+               "6 /lib/firmware/j721s2-c71_0-fw "                              \
+               "7 /lib/firmware/j721s2-c71_1-fw "
+#endif /* CONFIG_TARGET_J721S2_A72_EVM */
+
+#ifdef CONFIG_TARGET_J7200_A72_EVM
+#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY                         \
+       "do_main_cpsw0_qsgmii_phyinit=1\0"                              \
+       "init_main_cpsw0_qsgmii_phy=gpio set gpio@22_17;"               \
+                "gpio clear gpio@22_16\0"                              \
+       "main_cpsw0_qsgmii_phyinit="                                    \
+       "if test ${do_main_cpsw0_qsgmii_phyinit} -eq 1 && test ${dorprocboot} -eq 1 && " \
+                       "test ${boot} = mmc; then "                     \
+               "run init_main_cpsw0_qsgmii_phy;"                       \
+       "fi;\0"
+#define DEFAULT_RPROCS ""                                              \
+               "2 /lib/firmware/j7200-main-r5f0_0-fw "                 \
+               "3 /lib/firmware/j7200-main-r5f0_1-fw "
+#endif /* CONFIG_TARGET_J7200_A72_EVM */
+
+#ifndef EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
+#define EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
+#endif
+
+/* set default dfu_bufsiz to 128KB (sector size of OSPI) */
+#define EXTRA_ENV_DFUARGS \
+       DFU_ALT_INFO_MMC \
+       DFU_ALT_INFO_EMMC \
+       DFU_ALT_INFO_RAM \
+       DFU_ALT_INFO_OSPI
+
+#if defined(CONFIG_TARGET_J721S2_A72_EVM) || defined(CONFIG_TARGET_J7200_A72_EVM)
+#define EXTRA_ENV_J721S2_BOARD_SETTINGS_MTD                            \
+       "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                            \
+       "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"
+#else
+#define EXTRA_ENV_J721S2_BOARD_SETTINGS_MTD
+#endif
+
+/* Incorporate settings into the U-Boot environment */
+#define CONFIG_EXTRA_ENV_SETTINGS                                      \
+       DEFAULT_LINUX_BOOT_ENV                                          \
+       DEFAULT_MMC_TI_ARGS                                             \
+       DEFAULT_FIT_TI_ARGS                                             \
+       EXTRA_ENV_J721S2_BOARD_SETTINGS                                 \
+       EXTRA_ENV_J721S2_BOARD_SETTINGS_MMC                             \
+       EXTRA_ENV_RPROC_SETTINGS                                        \
+       EXTRA_ENV_DFUARGS                                               \
+       DEFAULT_UFS_TI_ARGS                                             \
+       EXTRA_ENV_J721S2_BOARD_SETTINGS_MTD                             \
+       EXTRA_ENV_CONFIG_MAIN_CPSW0_QSGMII_PHY
+
+/* Now for the remaining common defines */
+#include <configs/ti_armv7_common.h>
+
+/* MMC ENV related defines */
+
+#endif /* __CONFIG_J721S2_EVM_H */