ram: rk3399: Configure tsel write ca for lpddr4

tsel write ca_p and ca_n values need to write on PHY 544, 672
and 800 to configure ds odt.

Configure the same PHY register for lpddr4 would require a mask
value of (300 << 8).

Add support for it.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: YouMin Chen <cym@rock-chips.com>
Reviewed-by: Kever Yang <Kever.yang@rock-chips.com>

diff --git a/drivers/ram/rockchip/sdram_rk3399.c b/drivers/ram/rockchip/sdram_rk3399.c
index 2498620aecd3d6250139a9b9653f2397dcc6649e..3e069ab0ef339d25b51929bd02de9cf7fc39e8a6 100644 (file)
--- a/drivers/ram/rockchip/sdram_rk3399.c
+++ b/drivers/ram/rockchip/sdram_rk3399.c
@@ -502,9 +502,18 @@ static void set_ds_odt(const struct chan_info *chan,
 
        /* phy_adr_tsel_select_ 8bits DENALI_PHY_544/672/800 offset_0 */
        reg_value = tsel_wr_select_ca_n | (tsel_wr_select_ca_p << 0x4);
-       clrsetbits_le32(&denali_phy[544], 0xff, reg_value);
-       clrsetbits_le32(&denali_phy[672], 0xff, reg_value);
-       clrsetbits_le32(&denali_phy[800], 0xff, reg_value);
+       if (IS_ENABLED(CONFIG_RAM_RK3399_LPDDR4)) {
+               /* LPDDR4 these register read always return 0, so
+                * can not use clrsetbits_le32(), need to write32
+                */
+               writel((0x300 << 8) | reg_value, &denali_phy[544]);
+               writel((0x300 << 8) | reg_value, &denali_phy[672]);
+               writel((0x300 << 8) | reg_value, &denali_phy[800]);
+       } else {
+               clrsetbits_le32(&denali_phy[544], 0xff, reg_value);
+               clrsetbits_le32(&denali_phy[672], 0xff, reg_value);
+               clrsetbits_le32(&denali_phy[800], 0xff, reg_value);
+       }
 
        /* phy_pad_addr_drive 8bits DENALI_PHY_928 offset_0 */
        clrsetbits_le32(&denali_phy[928], 0xff, reg_value);