]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
ARMV7: OMAP4: Enable saveenv to eMMC for SDP4430
authorSukumar Ghorai <s-ghorai@ti.com>
Tue, 14 Sep 2010 08:22:34 +0000 (13:52 +0530)
committerWolfgang Denk <wd@denx.de>
Sun, 17 Oct 2010 18:14:22 +0000 (20:14 +0200)
The SDP4430 does not have onboard NAND, it has eMMC on the second
MMC slot.  This patch adds support for saving the u-boot environment
to eMMC.

Signed-off-by: Aneesh V <aneesh@ti.com>
Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
include/configs/omap4_sdp4430.h

index 1241b1e3d8fa9eb8dee8f3e442ecc452711617a5..8274577ac8f47e19909183dca8bc6ab269488551 100644 (file)
 
 /*
  * Size of malloc() pool
- * Total Size Environment - 256k
+ * Total Size Environment - 128k
  * Malloc - add 256k
  */
-#define CONFIG_ENV_SIZE                        (256 << 10)
+#define CONFIG_ENV_SIZE                        (128 << 10)
 #define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + (256 << 10))
 #define CONFIG_SYS_GBL_DATA_SIZE       128     /* bytes reserved for */
                                                /* initial data */
 #define CONFIG_CONS_INDEX              3
 #define CONFIG_SYS_NS16550_COM3                UART3_BASE
 
-#define CONFIG_ENV_IS_NOWHERE
-
 #define CONFIG_BAUDRATE                        115200
 #define CONFIG_SYS_BAUDRATE_TABLE      {4800, 9600, 19200, 38400, 57600,\
                                        115200}
-
 /* I2C  */
 #define CONFIG_HARD_I2C                        1
 #define CONFIG_SYS_I2C_SPEED           100000
 #define CONFIG_SYS_MMC_SET_DEV         1
 #define CONFIG_DOS_PARTITION           1
 
+/* MMC ENV related defines */
+#define CONFIG_ENV_IS_IN_MMC           1
+#define CONFIG_SYS_MMC_ENV_DEV         1       /* SLOT2: eMMC(1) */
+#define CONFIG_ENV_OFFSET              0xE0000
+
 /* USB */
 #define CONFIG_MUSB_UDC                        1
 #define CONFIG_USB_OMAP3               1
 #define CONFIG_CMD_FAT         /* FAT support                  */
 #define CONFIG_CMD_I2C         /* I2C serial bus support       */
 #define CONFIG_CMD_MMC         /* MMC support                  */
+#define CONFIG_CMD_SAVEENV
 
 /* Disabled commands */
 #undef CONFIG_CMD_NET