]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
dm: sunxi: dts: Add sun7i device tree files
authorSimon Glass <sjg@chromium.org>
Fri, 31 Oct 2014 02:25:45 +0000 (20:25 -0600)
committerHans de Goede <hdegoede@redhat.com>
Wed, 5 Nov 2014 12:09:58 +0000 (13:09 +0100)
These are from Linux 3.17-rc7 (commit fe82dcec). U-Boot only uses a small
portion of these, but we may as well have something to look forward to.

The total compiled size is about 25KB.

Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
arch/arm/dts/sun7i-a20-pcduino3.dts [new file with mode: 0644]
arch/arm/dts/sun7i-a20.dtsi [new file with mode: 0644]
arch/arm/dts/sunxi-common-regulators.dtsi [new file with mode: 0644]
include/dt-bindings/input/input.h [new file with mode: 0644]

diff --git a/arch/arm/dts/sun7i-a20-pcduino3.dts b/arch/arm/dts/sun7i-a20-pcduino3.dts
new file mode 100644 (file)
index 0000000..046dfc0
--- /dev/null
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2014 Zoltan HERPAI
+ * Zoltan HERPAI <wigyori@uid0.hu>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+       model = "LinkSprite pcDuino3";
+       compatible = "linksprite,pcduino3", "allwinner,sun7i-a20";
+
+       soc@01c00000 {
+               mmc0: mmc@01c0f000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+                       vmmc-supply = <&reg_vcc3v3>;
+                       bus-width = <4>;
+                       cd-gpios = <&pio 7 1 0>; /* PH1 */
+                       cd-inverted;
+                       status = "okay";
+               };
+
+               usbphy: phy@01c13400 {
+                       usb1_vbus-supply = <&reg_usb1_vbus>;
+                       usb2_vbus-supply = <&reg_usb2_vbus>;
+                       status = "okay";
+               };
+
+               ehci0: usb@01c14000 {
+                       status = "okay";
+               };
+
+               ohci0: usb@01c14400 {
+                       status = "okay";
+               };
+
+               ahci: sata@01c18000 {
+                       target-supply = <&reg_ahci_5v>;
+                       status = "okay";
+               };
+
+               ehci1: usb@01c1c000 {
+                       status = "okay";
+               };
+
+               ohci1: usb@01c1c400 {
+                       status = "okay";
+               };
+
+               pinctrl@01c20800 {
+                       ahci_pwr_pin_a: ahci_pwr_pin@0 {
+                               allwinner,pins = "PH2";
+                       };
+
+                       led_pins_pcduino3: led_pins@0 {
+                               allwinner,pins = "PH15", "PH16";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       key_pins_pcduino3: key_pins@0 {
+                               allwinner,pins = "PH17", "PH18", "PH19";
+                               allwinner,function = "gpio_in";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+               };
+
+               ir0: ir@01c21800 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&ir0_pins_a>;
+                       status = "okay";
+               };
+
+               uart0: serial@01c28000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&uart0_pins_a>;
+                       status = "okay";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&i2c0_pins_a>;
+                       status = "okay";
+
+                       axp209: pmic@34 {
+                               compatible = "x-powers,axp209";
+                               reg = <0x34>;
+                               interrupt-parent = <&nmi_intc>;
+                               interrupts = <0 8>;
+
+                               interrupt-controller;
+                               #interrupt-cells = <1>;
+                       };
+               };
+
+               gmac: ethernet@01c50000 {
+                       pinctrl-names = "default";
+                       pinctrl-0 = <&gmac_pins_mii_a>;
+                       phy = <&phy1>;
+                       phy-mode = "mii";
+                       status = "okay";
+
+                       phy1: ethernet-phy@1 {
+                               reg = <1>;
+                       };
+               };
+       };
+
+       leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&led_pins_pcduino3>;
+
+               tx {
+                       label = "pcduino3:green:tx";
+                       gpios = <&pio 7 15 GPIO_ACTIVE_LOW>;
+               };
+
+               rx {
+                       label = "pcduino3:green:rx";
+                       gpios = <&pio 7 16 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       gpio_keys {
+               compatible = "gpio-keys";
+               pinctrl-names = "default";
+               pinctrl-0 = <&key_pins_pcduino3>;
+               #address-cells = <1>;
+               #size-cells = <0>;
+               button@0 {
+                       label = "Key Back";
+                       linux,code = <KEY_BACK>;
+                       gpios = <&pio 7 17 GPIO_ACTIVE_LOW>;
+               };
+               button@1 {
+                       label = "Key Home";
+                       linux,code = <KEY_HOME>;
+                       gpios = <&pio 7 18 GPIO_ACTIVE_LOW>;
+               };
+               button@2 {
+                       label = "Key Menu";
+                       linux,code = <KEY_MENU>;
+                       gpios = <&pio 7 19 GPIO_ACTIVE_LOW>;
+               };
+       };
+
+       reg_usb1_vbus: usb1-vbus {
+               status = "okay";
+       };
+
+       reg_usb2_vbus: usb2-vbus {
+               status = "okay";
+       };
+
+       reg_ahci_5v: ahci-5v {
+               gpio = <&pio 7 2 0>;
+               status = "okay";
+       };
+};
diff --git a/arch/arm/dts/sun7i-a20.dtsi b/arch/arm/dts/sun7i-a20.dtsi
new file mode 100644 (file)
index 0000000..4011628
--- /dev/null
@@ -0,0 +1,988 @@
+/*
+ * Copyright 2013 Maxime Ripard
+ *
+ * Maxime Ripard <maxime.ripard@free-electrons.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/include/ "skeleton.dtsi"
+
+/ {
+       interrupt-parent = <&gic>;
+
+       aliases {
+               ethernet0 = &gmac;
+               serial0 = &uart0;
+               serial1 = &uart1;
+               serial2 = &uart2;
+               serial3 = &uart3;
+               serial4 = &uart4;
+               serial5 = &uart5;
+               serial6 = &uart6;
+               serial7 = &uart7;
+       };
+
+       cpus {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               cpu@0 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <0>;
+               };
+
+               cpu@1 {
+                       compatible = "arm,cortex-a7";
+                       device_type = "cpu";
+                       reg = <1>;
+               };
+       };
+
+       memory {
+               reg = <0x40000000 0x80000000>;
+       };
+
+       timer {
+               compatible = "arm,armv7-timer";
+               interrupts = <1 13 0xf08>,
+                            <1 14 0xf08>,
+                            <1 11 0xf08>,
+                            <1 10 0xf08>;
+       };
+
+       pmu {
+               compatible = "arm,cortex-a7-pmu", "arm,cortex-a15-pmu";
+               interrupts = <0 120 4>,
+                            <0 121 4>;
+       };
+
+       clocks {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               osc24M: clk@01c20050 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-osc-clk";
+                       reg = <0x01c20050 0x4>;
+                       clock-frequency = <24000000>;
+                       clock-output-names = "osc24M";
+               };
+
+               osc32k: clk@0 {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <32768>;
+                       clock-output-names = "osc32k";
+               };
+
+               pll1: clk@01c20000 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-pll1-clk";
+                       reg = <0x01c20000 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll1";
+               };
+
+               pll4: clk@01c20018 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun7i-a20-pll4-clk";
+                       reg = <0x01c20018 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll4";
+               };
+
+               pll5: clk@01c20020 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-pll5-clk";
+                       reg = <0x01c20020 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll5_ddr", "pll5_other";
+               };
+
+               pll6: clk@01c20028 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-pll6-clk";
+                       reg = <0x01c20028 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll6_sata", "pll6_other", "pll6";
+               };
+
+               pll8: clk@01c20040 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun7i-a20-pll4-clk";
+                       reg = <0x01c20040 0x4>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "pll8";
+               };
+
+               cpu: cpu@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-cpu-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>;
+                       clock-output-names = "cpu";
+               };
+
+               axi: axi@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-axi-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&cpu>;
+                       clock-output-names = "axi";
+               };
+
+               ahb: ahb@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-ahb-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&axi>;
+                       clock-output-names = "ahb";
+               };
+
+               ahb_gates: clk@01c20060 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun7i-a20-ahb-gates-clk";
+                       reg = <0x01c20060 0x8>;
+                       clocks = <&ahb>;
+                       clock-output-names = "ahb_usb0", "ahb_ehci0",
+                               "ahb_ohci0", "ahb_ehci1", "ahb_ohci1",
+                               "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+                               "ahb_mmc1", "ahb_mmc2", "ahb_mmc3", "ahb_ms",
+                               "ahb_nand", "ahb_sdram", "ahb_ace",
+                               "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+                               "ahb_spi2", "ahb_spi3", "ahb_sata",
+                               "ahb_hstimer", "ahb_ve", "ahb_tvd", "ahb_tve0",
+                               "ahb_tve1", "ahb_lcd0", "ahb_lcd1", "ahb_csi0",
+                               "ahb_csi1", "ahb_hdmi1", "ahb_hdmi0",
+                               "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
+                               "ahb_de_fe1", "ahb_gmac", "ahb_mp",
+                               "ahb_mali";
+               };
+
+               apb0: apb0@01c20054 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-apb0-clk";
+                       reg = <0x01c20054 0x4>;
+                       clocks = <&ahb>;
+                       clock-output-names = "apb0";
+               };
+
+               apb0_gates: clk@01c20068 {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun7i-a20-apb0-gates-clk";
+                       reg = <0x01c20068 0x4>;
+                       clocks = <&apb0>;
+                       clock-output-names = "apb0_codec", "apb0_spdif",
+                               "apb0_ac97", "apb0_iis0", "apb0_iis1",
+                               "apb0_pio", "apb0_ir0", "apb0_ir1",
+                               "apb0_iis2", "apb0_keypad";
+               };
+
+               apb1_mux: apb1_mux@01c20058 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-apb1-mux-clk";
+                       reg = <0x01c20058 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&osc32k>;
+                       clock-output-names = "apb1_mux";
+               };
+
+               apb1: apb1@01c20058 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-apb1-clk";
+                       reg = <0x01c20058 0x4>;
+                       clocks = <&apb1_mux>;
+                       clock-output-names = "apb1";
+               };
+
+               apb1_gates: clk@01c2006c {
+                       #clock-cells = <1>;
+                       compatible = "allwinner,sun7i-a20-apb1-gates-clk";
+                       reg = <0x01c2006c 0x4>;
+                       clocks = <&apb1>;
+                       clock-output-names = "apb1_i2c0", "apb1_i2c1",
+                               "apb1_i2c2", "apb1_i2c3", "apb1_can",
+                               "apb1_scr", "apb1_ps20", "apb1_ps21",
+                               "apb1_i2c4", "apb1_uart0", "apb1_uart1",
+                               "apb1_uart2", "apb1_uart3", "apb1_uart4",
+                               "apb1_uart5", "apb1_uart6", "apb1_uart7";
+               };
+
+               nand_clk: clk@01c20080 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20080 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "nand";
+               };
+
+               ms_clk: clk@01c20084 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20084 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ms";
+               };
+
+               mmc0_clk: clk@01c20088 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20088 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mmc0";
+               };
+
+               mmc1_clk: clk@01c2008c {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c2008c 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mmc1";
+               };
+
+               mmc2_clk: clk@01c20090 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20090 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mmc2";
+               };
+
+               mmc3_clk: clk@01c20094 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20094 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "mmc3";
+               };
+
+               ts_clk: clk@01c20098 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c20098 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ts";
+               };
+
+               ss_clk: clk@01c2009c {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c2009c 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ss";
+               };
+
+               spi0_clk: clk@01c200a0 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200a0 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "spi0";
+               };
+
+               spi1_clk: clk@01c200a4 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200a4 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "spi1";
+               };
+
+               spi2_clk: clk@01c200a8 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200a8 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "spi2";
+               };
+
+               pata_clk: clk@01c200ac {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200ac 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "pata";
+               };
+
+               ir0_clk: clk@01c200b0 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200b0 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ir0";
+               };
+
+               ir1_clk: clk@01c200b4 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200b4 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "ir1";
+               };
+
+               usb_clk: clk@01c200cc {
+                       #clock-cells = <1>;
+                       #reset-cells = <1>;
+                       compatible = "allwinner,sun4i-a10-usb-clk";
+                       reg = <0x01c200cc 0x4>;
+                       clocks = <&pll6 1>;
+                       clock-output-names = "usb_ohci0", "usb_ohci1", "usb_phy";
+               };
+
+               spi3_clk: clk@01c200d4 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c200d4 0x4>;
+                       clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
+                       clock-output-names = "spi3";
+               };
+
+               mbus_clk: clk@01c2015c {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun4i-a10-mod0-clk";
+                       reg = <0x01c2015c 0x4>;
+                       clocks = <&osc24M>, <&pll6 2>, <&pll5 1>;
+                       clock-output-names = "mbus";
+               };
+
+               /*
+                * The following two are dummy clocks, placeholders used in the gmac_tx
+                * clock. The gmac driver will choose one parent depending on the PHY
+                * interface mode, using clk_set_rate auto-reparenting.
+                * The actual TX clock rate is not controlled by the gmac_tx clock.
+                */
+               mii_phy_tx_clk: clk@2 {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <25000000>;
+                       clock-output-names = "mii_phy_tx";
+               };
+
+               gmac_int_tx_clk: clk@3 {
+                       #clock-cells = <0>;
+                       compatible = "fixed-clock";
+                       clock-frequency = <125000000>;
+                       clock-output-names = "gmac_int_tx";
+               };
+
+               gmac_tx_clk: clk@01c20164 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun7i-a20-gmac-clk";
+                       reg = <0x01c20164 0x4>;
+                       clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
+                       clock-output-names = "gmac_tx";
+               };
+
+               /*
+                * Dummy clock used by output clocks
+                */
+               osc24M_32k: clk@1 {
+                       #clock-cells = <0>;
+                       compatible = "fixed-factor-clock";
+                       clock-div = <750>;
+                       clock-mult = <1>;
+                       clocks = <&osc24M>;
+                       clock-output-names = "osc24M_32k";
+               };
+
+               clk_out_a: clk@01c201f0 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun7i-a20-out-clk";
+                       reg = <0x01c201f0 0x4>;
+                       clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+                       clock-output-names = "clk_out_a";
+               };
+
+               clk_out_b: clk@01c201f4 {
+                       #clock-cells = <0>;
+                       compatible = "allwinner,sun7i-a20-out-clk";
+                       reg = <0x01c201f4 0x4>;
+                       clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>;
+                       clock-output-names = "clk_out_b";
+               };
+       };
+
+       soc@01c00000 {
+               compatible = "simple-bus";
+               #address-cells = <1>;
+               #size-cells = <1>;
+               ranges;
+
+               nmi_intc: interrupt-controller@01c00030 {
+                       compatible = "allwinner,sun7i-a20-sc-nmi";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       reg = <0x01c00030 0x0c>;
+                       interrupts = <0 0 4>;
+               };
+
+               spi0: spi@01c05000 {
+                       compatible = "allwinner,sun4i-a10-spi";
+                       reg = <0x01c05000 0x1000>;
+                       interrupts = <0 10 4>;
+                       clocks = <&ahb_gates 20>, <&spi0_clk>;
+                       clock-names = "ahb", "mod";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               spi1: spi@01c06000 {
+                       compatible = "allwinner,sun4i-a10-spi";
+                       reg = <0x01c06000 0x1000>;
+                       interrupts = <0 11 4>;
+                       clocks = <&ahb_gates 21>, <&spi1_clk>;
+                       clock-names = "ahb", "mod";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               emac: ethernet@01c0b000 {
+                       compatible = "allwinner,sun4i-a10-emac";
+                       reg = <0x01c0b000 0x1000>;
+                       interrupts = <0 55 4>;
+                       clocks = <&ahb_gates 17>;
+                       status = "disabled";
+               };
+
+               mdio@01c0b080 {
+                       compatible = "allwinner,sun4i-a10-mdio";
+                       reg = <0x01c0b080 0x14>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               mmc0: mmc@01c0f000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c0f000 0x1000>;
+                       clocks = <&ahb_gates 8>, <&mmc0_clk>;
+                       clock-names = "ahb", "mmc";
+                       interrupts = <0 32 4>;
+                       status = "disabled";
+               };
+
+               mmc1: mmc@01c10000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c10000 0x1000>;
+                       clocks = <&ahb_gates 9>, <&mmc1_clk>;
+                       clock-names = "ahb", "mmc";
+                       interrupts = <0 33 4>;
+                       status = "disabled";
+               };
+
+               mmc2: mmc@01c11000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c11000 0x1000>;
+                       clocks = <&ahb_gates 10>, <&mmc2_clk>;
+                       clock-names = "ahb", "mmc";
+                       interrupts = <0 34 4>;
+                       status = "disabled";
+               };
+
+               mmc3: mmc@01c12000 {
+                       compatible = "allwinner,sun5i-a13-mmc";
+                       reg = <0x01c12000 0x1000>;
+                       clocks = <&ahb_gates 11>, <&mmc3_clk>;
+                       clock-names = "ahb", "mmc";
+                       interrupts = <0 35 4>;
+                       status = "disabled";
+               };
+
+               usbphy: phy@01c13400 {
+                       #phy-cells = <1>;
+                       compatible = "allwinner,sun7i-a20-usb-phy";
+                       reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>;
+                       reg-names = "phy_ctrl", "pmu1", "pmu2";
+                       clocks = <&usb_clk 8>;
+                       clock-names = "usb_phy";
+                       resets = <&usb_clk 1>, <&usb_clk 2>;
+                       reset-names = "usb1_reset", "usb2_reset";
+                       status = "disabled";
+               };
+
+               ehci0: usb@01c14000 {
+                       compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+                       reg = <0x01c14000 0x100>;
+                       interrupts = <0 39 4>;
+                       clocks = <&ahb_gates 1>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci0: usb@01c14400 {
+                       compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+                       reg = <0x01c14400 0x100>;
+                       interrupts = <0 64 4>;
+                       clocks = <&usb_clk 6>, <&ahb_gates 2>;
+                       phys = <&usbphy 1>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               spi2: spi@01c17000 {
+                       compatible = "allwinner,sun4i-a10-spi";
+                       reg = <0x01c17000 0x1000>;
+                       interrupts = <0 12 4>;
+                       clocks = <&ahb_gates 22>, <&spi2_clk>;
+                       clock-names = "ahb", "mod";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               ahci: sata@01c18000 {
+                       compatible = "allwinner,sun4i-a10-ahci";
+                       reg = <0x01c18000 0x1000>;
+                       interrupts = <0 56 4>;
+                       clocks = <&pll6 0>, <&ahb_gates 25>;
+                       status = "disabled";
+               };
+
+               ehci1: usb@01c1c000 {
+                       compatible = "allwinner,sun7i-a20-ehci", "generic-ehci";
+                       reg = <0x01c1c000 0x100>;
+                       interrupts = <0 40 4>;
+                       clocks = <&ahb_gates 3>;
+                       phys = <&usbphy 2>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               ohci1: usb@01c1c400 {
+                       compatible = "allwinner,sun7i-a20-ohci", "generic-ohci";
+                       reg = <0x01c1c400 0x100>;
+                       interrupts = <0 65 4>;
+                       clocks = <&usb_clk 7>, <&ahb_gates 4>;
+                       phys = <&usbphy 2>;
+                       phy-names = "usb";
+                       status = "disabled";
+               };
+
+               spi3: spi@01c1f000 {
+                       compatible = "allwinner,sun4i-a10-spi";
+                       reg = <0x01c1f000 0x1000>;
+                       interrupts = <0 50 4>;
+                       clocks = <&ahb_gates 23>, <&spi3_clk>;
+                       clock-names = "ahb", "mod";
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               pio: pinctrl@01c20800 {
+                       compatible = "allwinner,sun7i-a20-pinctrl";
+                       reg = <0x01c20800 0x400>;
+                       interrupts = <0 28 4>;
+                       clocks = <&apb0_gates 5>;
+                       gpio-controller;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+                       #size-cells = <0>;
+                       #gpio-cells = <3>;
+
+                       pwm0_pins_a: pwm0@0 {
+                               allwinner,pins = "PB2";
+                               allwinner,function = "pwm";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       pwm1_pins_a: pwm1@0 {
+                               allwinner,pins = "PI3";
+                               allwinner,function = "pwm";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       uart0_pins_a: uart0@0 {
+                               allwinner,pins = "PB22", "PB23";
+                               allwinner,function = "uart0";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       uart2_pins_a: uart2@0 {
+                               allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+                               allwinner,function = "uart2";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       uart6_pins_a: uart6@0 {
+                               allwinner,pins = "PI12", "PI13";
+                               allwinner,function = "uart6";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       uart7_pins_a: uart7@0 {
+                               allwinner,pins = "PI20", "PI21";
+                               allwinner,function = "uart7";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       i2c0_pins_a: i2c0@0 {
+                               allwinner,pins = "PB0", "PB1";
+                               allwinner,function = "i2c0";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       i2c1_pins_a: i2c1@0 {
+                               allwinner,pins = "PB18", "PB19";
+                               allwinner,function = "i2c1";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       i2c2_pins_a: i2c2@0 {
+                               allwinner,pins = "PB20", "PB21";
+                               allwinner,function = "i2c2";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       emac_pins_a: emac0@0 {
+                               allwinner,pins = "PA0", "PA1", "PA2",
+                                               "PA3", "PA4", "PA5", "PA6",
+                                               "PA7", "PA8", "PA9", "PA10",
+                                               "PA11", "PA12", "PA13", "PA14",
+                                               "PA15", "PA16";
+                               allwinner,function = "emac";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       clk_out_a_pins_a: clk_out_a@0 {
+                               allwinner,pins = "PI12";
+                               allwinner,function = "clk_out_a";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       clk_out_b_pins_a: clk_out_b@0 {
+                               allwinner,pins = "PI13";
+                               allwinner,function = "clk_out_b";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       gmac_pins_mii_a: gmac_mii@0 {
+                               allwinner,pins = "PA0", "PA1", "PA2",
+                                               "PA3", "PA4", "PA5", "PA6",
+                                               "PA7", "PA8", "PA9", "PA10",
+                                               "PA11", "PA12", "PA13", "PA14",
+                                               "PA15", "PA16";
+                               allwinner,function = "gmac";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       gmac_pins_rgmii_a: gmac_rgmii@0 {
+                               allwinner,pins = "PA0", "PA1", "PA2",
+                                               "PA3", "PA4", "PA5", "PA6",
+                                               "PA7", "PA8", "PA10",
+                                               "PA11", "PA12", "PA13",
+                                               "PA15", "PA16";
+                               allwinner,function = "gmac";
+                               /*
+                                * data lines in RGMII mode use DDR mode
+                                * and need a higher signal drive strength
+                                */
+                               allwinner,drive = <3>;
+                               allwinner,pull = <0>;
+                       };
+
+                       spi1_pins_a: spi1@0 {
+                               allwinner,pins = "PI16", "PI17", "PI18", "PI19";
+                               allwinner,function = "spi1";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       spi2_pins_a: spi2@0 {
+                               allwinner,pins = "PC19", "PC20", "PC21", "PC22";
+                               allwinner,function = "spi2";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       mmc0_pins_a: mmc0@0 {
+                               allwinner,pins = "PF0","PF1","PF2","PF3","PF4","PF5";
+                               allwinner,function = "mmc0";
+                               allwinner,drive = <2>;
+                               allwinner,pull = <0>;
+                       };
+
+                       mmc0_cd_pin_reference_design: mmc0_cd_pin@0 {
+                               allwinner,pins = "PH1";
+                               allwinner,function = "gpio_in";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <1>;
+                       };
+
+                       mmc3_pins_a: mmc3@0 {
+                               allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
+                               allwinner,function = "mmc3";
+                               allwinner,drive = <2>;
+                               allwinner,pull = <0>;
+                       };
+
+                       ir0_pins_a: ir0@0 {
+                                   allwinner,pins = "PB3","PB4";
+                                   allwinner,function = "ir0";
+                                   allwinner,drive = <0>;
+                                   allwinner,pull = <0>;
+                       };
+
+                       ir1_pins_a: ir1@0 {
+                                   allwinner,pins = "PB22","PB23";
+                                   allwinner,function = "ir1";
+                                   allwinner,drive = <0>;
+                                   allwinner,pull = <0>;
+                       };
+               };
+
+               timer@01c20c00 {
+                       compatible = "allwinner,sun4i-a10-timer";
+                       reg = <0x01c20c00 0x90>;
+                       interrupts = <0 22 4>,
+                                    <0 23 4>,
+                                    <0 24 4>,
+                                    <0 25 4>,
+                                    <0 67 4>,
+                                    <0 68 4>;
+                       clocks = <&osc24M>;
+               };
+
+               wdt: watchdog@01c20c90 {
+                       compatible = "allwinner,sun4i-a10-wdt";
+                       reg = <0x01c20c90 0x10>;
+               };
+
+               rtc: rtc@01c20d00 {
+                       compatible = "allwinner,sun7i-a20-rtc";
+                       reg = <0x01c20d00 0x20>;
+                       interrupts = <0 24 4>;
+               };
+
+               pwm: pwm@01c20e00 {
+                       compatible = "allwinner,sun7i-a20-pwm";
+                       reg = <0x01c20e00 0xc>;
+                       clocks = <&osc24M>;
+                       #pwm-cells = <3>;
+                       status = "disabled";
+               };
+
+               ir0: ir@01c21800 {
+                       compatible = "allwinner,sun4i-a10-ir";
+                       clocks = <&apb0_gates 6>, <&ir0_clk>;
+                       clock-names = "apb", "ir";
+                       interrupts = <0 5 4>;
+                       reg = <0x01c21800 0x40>;
+                       status = "disabled";
+               };
+
+               ir1: ir@01c21c00 {
+                       compatible = "allwinner,sun4i-a10-ir";
+                       clocks = <&apb0_gates 7>, <&ir1_clk>;
+                       clock-names = "apb", "ir";
+                       interrupts = <0 6 4>;
+                       reg = <0x01c21c00 0x40>;
+                       status = "disabled";
+               };
+
+               sid: eeprom@01c23800 {
+                       compatible = "allwinner,sun7i-a20-sid";
+                       reg = <0x01c23800 0x200>;
+               };
+
+               rtp: rtp@01c25000 {
+                       compatible = "allwinner,sun4i-a10-ts";
+                       reg = <0x01c25000 0x100>;
+                       interrupts = <0 29 4>;
+               };
+
+               uart0: serial@01c28000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28000 0x400>;
+                       interrupts = <0 1 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 16>;
+                       status = "disabled";
+               };
+
+               uart1: serial@01c28400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28400 0x400>;
+                       interrupts = <0 2 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 17>;
+                       status = "disabled";
+               };
+
+               uart2: serial@01c28800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28800 0x400>;
+                       interrupts = <0 3 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 18>;
+                       status = "disabled";
+               };
+
+               uart3: serial@01c28c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c28c00 0x400>;
+                       interrupts = <0 4 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 19>;
+                       status = "disabled";
+               };
+
+               uart4: serial@01c29000 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c29000 0x400>;
+                       interrupts = <0 17 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 20>;
+                       status = "disabled";
+               };
+
+               uart5: serial@01c29400 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c29400 0x400>;
+                       interrupts = <0 18 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 21>;
+                       status = "disabled";
+               };
+
+               uart6: serial@01c29800 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c29800 0x400>;
+                       interrupts = <0 19 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 22>;
+                       status = "disabled";
+               };
+
+               uart7: serial@01c29c00 {
+                       compatible = "snps,dw-apb-uart";
+                       reg = <0x01c29c00 0x400>;
+                       interrupts = <0 20 4>;
+                       reg-shift = <2>;
+                       reg-io-width = <4>;
+                       clocks = <&apb1_gates 23>;
+                       status = "disabled";
+               };
+
+               i2c0: i2c@01c2ac00 {
+                       compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2ac00 0x400>;
+                       interrupts = <0 7 4>;
+                       clocks = <&apb1_gates 0>;
+                       clock-frequency = <100000>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c1: i2c@01c2b000 {
+                       compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2b000 0x400>;
+                       interrupts = <0 8 4>;
+                       clocks = <&apb1_gates 1>;
+                       clock-frequency = <100000>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c2: i2c@01c2b400 {
+                       compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2b400 0x400>;
+                       interrupts = <0 9 4>;
+                       clocks = <&apb1_gates 2>;
+                       clock-frequency = <100000>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c3: i2c@01c2b800 {
+                       compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2b800 0x400>;
+                       interrupts = <0 88 4>;
+                       clocks = <&apb1_gates 3>;
+                       clock-frequency = <100000>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               i2c4: i2c@01c2c000 {
+                       compatible = "allwinner,sun7i-a20-i2c", "allwinner,sun4i-a10-i2c";
+                       reg = <0x01c2c000 0x400>;
+                       interrupts = <0 89 4>;
+                       clocks = <&apb1_gates 15>;
+                       clock-frequency = <100000>;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               gmac: ethernet@01c50000 {
+                       compatible = "allwinner,sun7i-a20-gmac";
+                       reg = <0x01c50000 0x10000>;
+                       interrupts = <0 85 4>;
+                       interrupt-names = "macirq";
+                       clocks = <&ahb_gates 49>, <&gmac_tx_clk>;
+                       clock-names = "stmmaceth", "allwinner_gmac_tx";
+                       snps,pbl = <2>;
+                       snps,fixed-burst;
+                       snps,force_sf_dma_mode;
+                       status = "disabled";
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+               };
+
+               hstimer@01c60000 {
+                       compatible = "allwinner,sun7i-a20-hstimer";
+                       reg = <0x01c60000 0x1000>;
+                       interrupts = <0 81 4>,
+                                    <0 82 4>,
+                                    <0 83 4>,
+                                    <0 84 4>;
+                       clocks = <&ahb_gates 28>;
+               };
+
+               gic: interrupt-controller@01c81000 {
+                       compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+                       reg = <0x01c81000 0x1000>,
+                             <0x01c82000 0x1000>,
+                             <0x01c84000 0x2000>,
+                             <0x01c86000 0x2000>;
+                       interrupt-controller;
+                       #interrupt-cells = <3>;
+                       interrupts = <1 9 0xf04>;
+               };
+       };
+};
diff --git a/arch/arm/dts/sunxi-common-regulators.dtsi b/arch/arm/dts/sunxi-common-regulators.dtsi
new file mode 100644 (file)
index 0000000..3d021ef
--- /dev/null
@@ -0,0 +1,89 @@
+/*
+ * sunxi boards common regulator (ahci target power supply, usb-vbus) code
+ *
+ * Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+       soc@01c00000 {
+               pio: pinctrl@01c20800 {
+                       ahci_pwr_pin_a: ahci_pwr_pin@0 {
+                               allwinner,pins = "PB8";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       usb1_vbus_pin_a: usb1_vbus_pin@0 {
+                               allwinner,pins = "PH6";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+
+                       usb2_vbus_pin_a: usb2_vbus_pin@0 {
+                               allwinner,pins = "PH3";
+                               allwinner,function = "gpio_out";
+                               allwinner,drive = <0>;
+                               allwinner,pull = <0>;
+                       };
+               };
+       };
+
+       reg_ahci_5v: ahci-5v {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&ahci_pwr_pin_a>;
+               regulator-name = "ahci-5v";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 1 8 0>;
+               status = "disabled";
+       };
+
+       reg_usb1_vbus: usb1-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb1_vbus_pin_a>;
+               regulator-name = "usb1-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 7 6 0>;
+               status = "disabled";
+       };
+
+       reg_usb2_vbus: usb2-vbus {
+               compatible = "regulator-fixed";
+               pinctrl-names = "default";
+               pinctrl-0 = <&usb2_vbus_pin_a>;
+               regulator-name = "usb2-vbus";
+               regulator-min-microvolt = <5000000>;
+               regulator-max-microvolt = <5000000>;
+               enable-active-high;
+               gpio = <&pio 7 3 0>;
+               status = "disabled";
+       };
+
+       reg_vcc3v0: vcc3v0 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v0";
+               regulator-min-microvolt = <3000000>;
+               regulator-max-microvolt = <3000000>;
+       };
+
+       reg_vcc3v3: vcc3v3 {
+               compatible = "regulator-fixed";
+               regulator-name = "vcc3v3";
+               regulator-min-microvolt = <3300000>;
+               regulator-max-microvolt = <3300000>;
+       };
+};
diff --git a/include/dt-bindings/input/input.h b/include/dt-bindings/input/input.h
new file mode 100644 (file)
index 0000000..042e7b3
--- /dev/null
@@ -0,0 +1,525 @@
+/*
+ * This header provides constants for most input bindings.
+ *
+ * Most input bindings include key code, matrix key code format.
+ * In most cases, key code and matrix key code format uses
+ * the standard values/macro defined in this header.
+ */
+
+#ifndef _DT_BINDINGS_INPUT_INPUT_H
+#define _DT_BINDINGS_INPUT_INPUT_H
+
+#define KEY_RESERVED           0
+#define KEY_ESC                        1
+#define KEY_1                  2
+#define KEY_2                  3
+#define KEY_3                  4
+#define KEY_4                  5
+#define KEY_5                  6
+#define KEY_6                  7
+#define KEY_7                  8
+#define KEY_8                  9
+#define KEY_9                  10
+#define KEY_0                  11
+#define KEY_MINUS              12
+#define KEY_EQUAL              13
+#define KEY_BACKSPACE          14
+#define KEY_TAB                        15
+#define KEY_Q                  16
+#define KEY_W                  17
+#define KEY_E                  18
+#define KEY_R                  19
+#define KEY_T                  20
+#define KEY_Y                  21
+#define KEY_U                  22
+#define KEY_I                  23
+#define KEY_O                  24
+#define KEY_P                  25
+#define KEY_LEFTBRACE          26
+#define KEY_RIGHTBRACE         27
+#define KEY_ENTER              28
+#define KEY_LEFTCTRL           29
+#define KEY_A                  30
+#define KEY_S                  31
+#define KEY_D                  32
+#define KEY_F                  33
+#define KEY_G                  34
+#define KEY_H                  35
+#define KEY_J                  36
+#define KEY_K                  37
+#define KEY_L                  38
+#define KEY_SEMICOLON          39
+#define KEY_APOSTROPHE         40
+#define KEY_GRAVE              41
+#define KEY_LEFTSHIFT          42
+#define KEY_BACKSLASH          43
+#define KEY_Z                  44
+#define KEY_X                  45
+#define KEY_C                  46
+#define KEY_V                  47
+#define KEY_B                  48
+#define KEY_N                  49
+#define KEY_M                  50
+#define KEY_COMMA              51
+#define KEY_DOT                        52
+#define KEY_SLASH              53
+#define KEY_RIGHTSHIFT         54
+#define KEY_KPASTERISK         55
+#define KEY_LEFTALT            56
+#define KEY_SPACE              57
+#define KEY_CAPSLOCK           58
+#define KEY_F1                 59
+#define KEY_F2                 60
+#define KEY_F3                 61
+#define KEY_F4                 62
+#define KEY_F5                 63
+#define KEY_F6                 64
+#define KEY_F7                 65
+#define KEY_F8                 66
+#define KEY_F9                 67
+#define KEY_F10                        68
+#define KEY_NUMLOCK            69
+#define KEY_SCROLLLOCK         70
+#define KEY_KP7                        71
+#define KEY_KP8                        72
+#define KEY_KP9                        73
+#define KEY_KPMINUS            74
+#define KEY_KP4                        75
+#define KEY_KP5                        76
+#define KEY_KP6                        77
+#define KEY_KPPLUS             78
+#define KEY_KP1                        79
+#define KEY_KP2                        80
+#define KEY_KP3                        81
+#define KEY_KP0                        82
+#define KEY_KPDOT              83
+
+#define KEY_ZENKAKUHANKAKU     85
+#define KEY_102ND              86
+#define KEY_F11                        87
+#define KEY_F12                        88
+#define KEY_RO                 89
+#define KEY_KATAKANA           90
+#define KEY_HIRAGANA           91
+#define KEY_HENKAN             92
+#define KEY_KATAKANAHIRAGANA   93
+#define KEY_MUHENKAN           94
+#define KEY_KPJPCOMMA          95
+#define KEY_KPENTER            96
+#define KEY_RIGHTCTRL          97
+#define KEY_KPSLASH            98
+#define KEY_SYSRQ              99
+#define KEY_RIGHTALT           100
+#define KEY_LINEFEED           101
+#define KEY_HOME               102
+#define KEY_UP                 103
+#define KEY_PAGEUP             104
+#define KEY_LEFT               105
+#define KEY_RIGHT              106
+#define KEY_END                        107
+#define KEY_DOWN               108
+#define KEY_PAGEDOWN           109
+#define KEY_INSERT             110
+#define KEY_DELETE             111
+#define KEY_MACRO              112
+#define KEY_MUTE               113
+#define KEY_VOLUMEDOWN         114
+#define KEY_VOLUMEUP           115
+#define KEY_POWER              116     /* SC System Power Down */
+#define KEY_KPEQUAL            117
+#define KEY_KPPLUSMINUS                118
+#define KEY_PAUSE              119
+#define KEY_SCALE              120     /* AL Compiz Scale (Expose) */
+
+#define KEY_KPCOMMA            121
+#define KEY_HANGEUL            122
+#define KEY_HANGUEL            KEY_HANGEUL
+#define KEY_HANJA              123
+#define KEY_YEN                        124
+#define KEY_LEFTMETA           125
+#define KEY_RIGHTMETA          126
+#define KEY_COMPOSE            127
+
+#define KEY_STOP               128     /* AC Stop */
+#define KEY_AGAIN              129
+#define KEY_PROPS              130     /* AC Properties */
+#define KEY_UNDO               131     /* AC Undo */
+#define KEY_FRONT              132
+#define KEY_COPY               133     /* AC Copy */
+#define KEY_OPEN               134     /* AC Open */
+#define KEY_PASTE              135     /* AC Paste */
+#define KEY_FIND               136     /* AC Search */
+#define KEY_CUT                        137     /* AC Cut */
+#define KEY_HELP               138     /* AL Integrated Help Center */
+#define KEY_MENU               139     /* Menu (show menu) */
+#define KEY_CALC               140     /* AL Calculator */
+#define KEY_SETUP              141
+#define KEY_SLEEP              142     /* SC System Sleep */
+#define KEY_WAKEUP             143     /* System Wake Up */
+#define KEY_FILE               144     /* AL Local Machine Browser */
+#define KEY_SENDFILE           145
+#define KEY_DELETEFILE         146
+#define KEY_XFER               147
+#define KEY_PROG1              148
+#define KEY_PROG2              149
+#define KEY_WWW                        150     /* AL Internet Browser */
+#define KEY_MSDOS              151
+#define KEY_COFFEE             152     /* AL Terminal Lock/Screensaver */
+#define KEY_SCREENLOCK         KEY_COFFEE
+#define KEY_DIRECTION          153
+#define KEY_CYCLEWINDOWS       154
+#define KEY_MAIL               155
+#define KEY_BOOKMARKS          156     /* AC Bookmarks */
+#define KEY_COMPUTER           157
+#define KEY_BACK               158     /* AC Back */
+#define KEY_FORWARD            159     /* AC Forward */
+#define KEY_CLOSECD            160
+#define KEY_EJECTCD            161
+#define KEY_EJECTCLOSECD       162
+#define KEY_NEXTSONG           163
+#define KEY_PLAYPAUSE          164
+#define KEY_PREVIOUSSONG       165
+#define KEY_STOPCD             166
+#define KEY_RECORD             167
+#define KEY_REWIND             168
+#define KEY_PHONE              169     /* Media Select Telephone */
+#define KEY_ISO                        170
+#define KEY_CONFIG             171     /* AL Consumer Control Configuration */
+#define KEY_HOMEPAGE           172     /* AC Home */
+#define KEY_REFRESH            173     /* AC Refresh */
+#define KEY_EXIT               174     /* AC Exit */
+#define KEY_MOVE               175
+#define KEY_EDIT               176
+#define KEY_SCROLLUP           177
+#define KEY_SCROLLDOWN         178
+#define KEY_KPLEFTPAREN                179
+#define KEY_KPRIGHTPAREN       180
+#define KEY_NEW                        181     /* AC New */
+#define KEY_REDO               182     /* AC Redo/Repeat */
+
+#define KEY_F13                        183
+#define KEY_F14                        184
+#define KEY_F15                        185
+#define KEY_F16                        186
+#define KEY_F17                        187
+#define KEY_F18                        188
+#define KEY_F19                        189
+#define KEY_F20                        190
+#define KEY_F21                        191
+#define KEY_F22                        192
+#define KEY_F23                        193
+#define KEY_F24                        194
+
+#define KEY_PLAYCD             200
+#define KEY_PAUSECD            201
+#define KEY_PROG3              202
+#define KEY_PROG4              203
+#define KEY_DASHBOARD          204     /* AL Dashboard */
+#define KEY_SUSPEND            205
+#define KEY_CLOSE              206     /* AC Close */
+#define KEY_PLAY               207
+#define KEY_FASTFORWARD                208
+#define KEY_BASSBOOST          209
+#define KEY_PRINT              210     /* AC Print */
+#define KEY_HP                 211
+#define KEY_CAMERA             212
+#define KEY_SOUND              213
+#define KEY_QUESTION           214
+#define KEY_EMAIL              215
+#define KEY_CHAT               216
+#define KEY_SEARCH             217
+#define KEY_CONNECT            218
+#define KEY_FINANCE            219     /* AL Checkbook/Finance */
+#define KEY_SPORT              220
+#define KEY_SHOP               221
+#define KEY_ALTERASE           222
+#define KEY_CANCEL             223     /* AC Cancel */
+#define KEY_BRIGHTNESSDOWN     224
+#define KEY_BRIGHTNESSUP       225
+#define KEY_MEDIA              226
+
+#define KEY_SWITCHVIDEOMODE    227     /* Cycle between available video
+                                          outputs (Monitor/LCD/TV-out/etc) */
+#define KEY_KBDILLUMTOGGLE     228
+#define KEY_KBDILLUMDOWN       229
+#define KEY_KBDILLUMUP         230
+
+#define KEY_SEND               231     /* AC Send */
+#define KEY_REPLY              232     /* AC Reply */
+#define KEY_FORWARDMAIL                233     /* AC Forward Msg */
+#define KEY_SAVE               234     /* AC Save */
+#define KEY_DOCUMENTS          235
+
+#define KEY_BATTERY            236
+
+#define KEY_BLUETOOTH          237
+#define KEY_WLAN               238
+#define KEY_UWB                        239
+
+#define KEY_UNKNOWN            240
+
+#define KEY_VIDEO_NEXT         241     /* drive next video source */
+#define KEY_VIDEO_PREV         242     /* drive previous video source */
+#define KEY_BRIGHTNESS_CYCLE   243     /* brightness up, after max is min */
+#define KEY_BRIGHTNESS_ZERO    244     /* brightness off, use ambient */
+#define KEY_DISPLAY_OFF                245     /* display device to off state */
+
+#define KEY_WIMAX              246
+#define KEY_RFKILL             247     /* Key that controls all radios */
+
+#define KEY_MICMUTE            248     /* Mute / unmute the microphone */
+
+/* Code 255 is reserved for special needs of AT keyboard driver */
+
+#define BTN_MISC               0x100
+#define BTN_0                  0x100
+#define BTN_1                  0x101
+#define BTN_2                  0x102
+#define BTN_3                  0x103
+#define BTN_4                  0x104
+#define BTN_5                  0x105
+#define BTN_6                  0x106
+#define BTN_7                  0x107
+#define BTN_8                  0x108
+#define BTN_9                  0x109
+
+#define BTN_MOUSE              0x110
+#define BTN_LEFT               0x110
+#define BTN_RIGHT              0x111
+#define BTN_MIDDLE             0x112
+#define BTN_SIDE               0x113
+#define BTN_EXTRA              0x114
+#define BTN_FORWARD            0x115
+#define BTN_BACK               0x116
+#define BTN_TASK               0x117
+
+#define BTN_JOYSTICK           0x120
+#define BTN_TRIGGER            0x120
+#define BTN_THUMB              0x121
+#define BTN_THUMB2             0x122
+#define BTN_TOP                        0x123
+#define BTN_TOP2               0x124
+#define BTN_PINKIE             0x125
+#define BTN_BASE               0x126
+#define BTN_BASE2              0x127
+#define BTN_BASE3              0x128
+#define BTN_BASE4              0x129
+#define BTN_BASE5              0x12a
+#define BTN_BASE6              0x12b
+#define BTN_DEAD               0x12f
+
+#define BTN_GAMEPAD            0x130
+#define BTN_SOUTH              0x130
+#define BTN_A                  BTN_SOUTH
+#define BTN_EAST               0x131
+#define BTN_B                  BTN_EAST
+#define BTN_C                  0x132
+#define BTN_NORTH              0x133
+#define BTN_X                  BTN_NORTH
+#define BTN_WEST               0x134
+#define BTN_Y                  BTN_WEST
+#define BTN_Z                  0x135
+#define BTN_TL                 0x136
+#define BTN_TR                 0x137
+#define BTN_TL2                        0x138
+#define BTN_TR2                        0x139
+#define BTN_SELECT             0x13a
+#define BTN_START              0x13b
+#define BTN_MODE               0x13c
+#define BTN_THUMBL             0x13d
+#define BTN_THUMBR             0x13e
+
+#define BTN_DIGI               0x140
+#define BTN_TOOL_PEN           0x140
+#define BTN_TOOL_RUBBER                0x141
+#define BTN_TOOL_BRUSH         0x142
+#define BTN_TOOL_PENCIL                0x143
+#define BTN_TOOL_AIRBRUSH      0x144
+#define BTN_TOOL_FINGER                0x145
+#define BTN_TOOL_MOUSE         0x146
+#define BTN_TOOL_LENS          0x147
+#define BTN_TOOL_QUINTTAP      0x148   /* Five fingers on trackpad */
+#define BTN_TOUCH              0x14a
+#define BTN_STYLUS             0x14b
+#define BTN_STYLUS2            0x14c
+#define BTN_TOOL_DOUBLETAP     0x14d
+#define BTN_TOOL_TRIPLETAP     0x14e
+#define BTN_TOOL_QUADTAP       0x14f   /* Four fingers on trackpad */
+
+#define BTN_WHEEL              0x150
+#define BTN_GEAR_DOWN          0x150
+#define BTN_GEAR_UP            0x151
+
+#define KEY_OK                 0x160
+#define KEY_SELECT             0x161
+#define KEY_GOTO               0x162
+#define KEY_CLEAR              0x163
+#define KEY_POWER2             0x164
+#define KEY_OPTION             0x165
+#define KEY_INFO               0x166   /* AL OEM Features/Tips/Tutorial */
+#define KEY_TIME               0x167
+#define KEY_VENDOR             0x168
+#define KEY_ARCHIVE            0x169
+#define KEY_PROGRAM            0x16a   /* Media Select Program Guide */
+#define KEY_CHANNEL            0x16b
+#define KEY_FAVORITES          0x16c
+#define KEY_EPG                        0x16d
+#define KEY_PVR                        0x16e   /* Media Select Home */
+#define KEY_MHP                        0x16f
+#define KEY_LANGUAGE           0x170
+#define KEY_TITLE              0x171
+#define KEY_SUBTITLE           0x172
+#define KEY_ANGLE              0x173
+#define KEY_ZOOM               0x174
+#define KEY_MODE               0x175
+#define KEY_KEYBOARD           0x176
+#define KEY_SCREEN             0x177
+#define KEY_PC                 0x178   /* Media Select Computer */
+#define KEY_TV                 0x179   /* Media Select TV */
+#define KEY_TV2                        0x17a   /* Media Select Cable */
+#define KEY_VCR                        0x17b   /* Media Select VCR */
+#define KEY_VCR2               0x17c   /* VCR Plus */
+#define KEY_SAT                        0x17d   /* Media Select Satellite */
+#define KEY_SAT2               0x17e
+#define KEY_CD                 0x17f   /* Media Select CD */
+#define KEY_TAPE               0x180   /* Media Select Tape */
+#define KEY_RADIO              0x181
+#define KEY_TUNER              0x182   /* Media Select Tuner */
+#define KEY_PLAYER             0x183
+#define KEY_TEXT               0x184
+#define KEY_DVD                        0x185   /* Media Select DVD */
+#define KEY_AUX                        0x186
+#define KEY_MP3                        0x187
+#define KEY_AUDIO              0x188   /* AL Audio Browser */
+#define KEY_VIDEO              0x189   /* AL Movie Browser */
+#define KEY_DIRECTORY          0x18a
+#define KEY_LIST               0x18b
+#define KEY_MEMO               0x18c   /* Media Select Messages */
+#define KEY_CALENDAR           0x18d
+#define KEY_RED                        0x18e
+#define KEY_GREEN              0x18f
+#define KEY_YELLOW             0x190
+#define KEY_BLUE               0x191
+#define KEY_CHANNELUP          0x192   /* Channel Increment */
+#define KEY_CHANNELDOWN                0x193   /* Channel Decrement */
+#define KEY_FIRST              0x194
+#define KEY_LAST               0x195   /* Recall Last */
+#define KEY_AB                 0x196
+#define KEY_NEXT               0x197
+#define KEY_RESTART            0x198
+#define KEY_SLOW               0x199
+#define KEY_SHUFFLE            0x19a
+#define KEY_BREAK              0x19b
+#define KEY_PREVIOUS           0x19c
+#define KEY_DIGITS             0x19d
+#define KEY_TEEN               0x19e
+#define KEY_TWEN               0x19f
+#define KEY_VIDEOPHONE         0x1a0   /* Media Select Video Phone */
+#define KEY_GAMES              0x1a1   /* Media Select Games */
+#define KEY_ZOOMIN             0x1a2   /* AC Zoom In */
+#define KEY_ZOOMOUT            0x1a3   /* AC Zoom Out */
+#define KEY_ZOOMRESET          0x1a4   /* AC Zoom */
+#define KEY_WORDPROCESSOR      0x1a5   /* AL Word Processor */
+#define KEY_EDITOR             0x1a6   /* AL Text Editor */
+#define KEY_SPREADSHEET                0x1a7   /* AL Spreadsheet */
+#define KEY_GRAPHICSEDITOR     0x1a8   /* AL Graphics Editor */
+#define KEY_PRESENTATION       0x1a9   /* AL Presentation App */
+#define KEY_DATABASE           0x1aa   /* AL Database App */
+#define KEY_NEWS               0x1ab   /* AL Newsreader */
+#define KEY_VOICEMAIL          0x1ac   /* AL Voicemail */
+#define KEY_ADDRESSBOOK                0x1ad   /* AL Contacts/Address Book */
+#define KEY_MESSENGER          0x1ae   /* AL Instant Messaging */
+#define KEY_DISPLAYTOGGLE      0x1af   /* Turn display (LCD) on and off */
+#define KEY_SPELLCHECK         0x1b0   /* AL Spell Check */
+#define KEY_LOGOFF             0x1b1   /* AL Logoff */
+
+#define KEY_DOLLAR             0x1b2
+#define KEY_EURO               0x1b3
+
+#define KEY_FRAMEBACK          0x1b4   /* Consumer - transport controls */
+#define KEY_FRAMEFORWARD       0x1b5
+#define KEY_CONTEXT_MENU       0x1b6   /* GenDesc - system context menu */
+#define KEY_MEDIA_REPEAT       0x1b7   /* Consumer - transport control */
+#define KEY_10CHANNELSUP       0x1b8   /* 10 channels up (10+) */
+#define KEY_10CHANNELSDOWN     0x1b9   /* 10 channels down (10-) */
+#define KEY_IMAGES             0x1ba   /* AL Image Browser */
+
+#define KEY_DEL_EOL            0x1c0
+#define KEY_DEL_EOS            0x1c1
+#define KEY_INS_LINE           0x1c2
+#define KEY_DEL_LINE           0x1c3
+
+#define KEY_FN                 0x1d0
+#define KEY_FN_ESC             0x1d1
+#define KEY_FN_F1              0x1d2
+#define KEY_FN_F2              0x1d3
+#define KEY_FN_F3              0x1d4
+#define KEY_FN_F4              0x1d5
+#define KEY_FN_F5              0x1d6
+#define KEY_FN_F6              0x1d7
+#define KEY_FN_F7              0x1d8
+#define KEY_FN_F8              0x1d9
+#define KEY_FN_F9              0x1da
+#define KEY_FN_F10             0x1db
+#define KEY_FN_F11             0x1dc
+#define KEY_FN_F12             0x1dd
+#define KEY_FN_1               0x1de
+#define KEY_FN_2               0x1df
+#define KEY_FN_D               0x1e0
+#define KEY_FN_E               0x1e1
+#define KEY_FN_F               0x1e2
+#define KEY_FN_S               0x1e3
+#define KEY_FN_B               0x1e4
+
+#define KEY_BRL_DOT1           0x1f1
+#define KEY_BRL_DOT2           0x1f2
+#define KEY_BRL_DOT3           0x1f3
+#define KEY_BRL_DOT4           0x1f4
+#define KEY_BRL_DOT5           0x1f5
+#define KEY_BRL_DOT6           0x1f6
+#define KEY_BRL_DOT7           0x1f7
+#define KEY_BRL_DOT8           0x1f8
+#define KEY_BRL_DOT9           0x1f9
+#define KEY_BRL_DOT10          0x1fa
+
+#define KEY_NUMERIC_0          0x200   /* used by phones, remote controls, */
+#define KEY_NUMERIC_1          0x201   /* and other keypads */
+#define KEY_NUMERIC_2          0x202
+#define KEY_NUMERIC_3          0x203
+#define KEY_NUMERIC_4          0x204
+#define KEY_NUMERIC_5          0x205
+#define KEY_NUMERIC_6          0x206
+#define KEY_NUMERIC_7          0x207
+#define KEY_NUMERIC_8          0x208
+#define KEY_NUMERIC_9          0x209
+#define KEY_NUMERIC_STAR       0x20a
+#define KEY_NUMERIC_POUND      0x20b
+
+#define KEY_CAMERA_FOCUS       0x210
+#define KEY_WPS_BUTTON         0x211   /* WiFi Protected Setup key */
+
+#define KEY_TOUCHPAD_TOGGLE    0x212   /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON                0x213
+#define KEY_TOUCHPAD_OFF       0x214
+
+#define KEY_CAMERA_ZOOMIN      0x215
+#define KEY_CAMERA_ZOOMOUT     0x216
+#define KEY_CAMERA_UP          0x217
+#define KEY_CAMERA_DOWN                0x218
+#define KEY_CAMERA_LEFT                0x219
+#define KEY_CAMERA_RIGHT       0x21a
+
+#define KEY_ATTENDANT_ON       0x21b
+#define KEY_ATTENDANT_OFF      0x21c
+#define KEY_ATTENDANT_TOGGLE   0x21d   /* Attendant call on or off */
+#define KEY_LIGHTS_TOGGLE      0x21e   /* Reading light on or off */
+
+#define BTN_DPAD_UP            0x220
+#define BTN_DPAD_DOWN          0x221
+#define BTN_DPAD_LEFT          0x222
+#define BTN_DPAD_RIGHT         0x223
+
+#define MATRIX_KEY(row, col, code)     \
+       ((((row) & 0xFF) << 24) | (((col) & 0xFF) << 16) | ((code) & 0xFFFF))
+
+#endif /* _DT_BINDINGS_INPUT_INPUT_H */