powerpc/mpc8572ds: revise board specific timing for dual-rank DIMMs

Tested all possible values for clk_adjust and write_data_delay for dual
rank UDIMM and RDIMM to revise the tables.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

diff --git a/board/freescale/mpc8572ds/ddr.c b/board/freescale/mpc8572ds/ddr.c
index d66ede2d5d45b88dbba0e5592dc262c61e86a258..cdde6ec70fc90c9d5b83967f5fb7d51c7ef2b8e7 100644 (file)
--- a/board/freescale/mpc8572ds/ddr.c
+++ b/board/freescale/mpc8572ds/ddr.c
@@ -49,28 +49,27 @@ typedef struct {
        u32 force_2T;
 } board_specific_parameters_t;
 
-/* ranges for parameters:
- *  wr_data_delay = 0-6
- *  clk adjust = 0-8
- *  cpo 2-0x1E (30)
+/*
+ * CPO value doesn't matter if workaround for errata 111 and 134 enabled.
+ *
+ * For DDR2 DIMM, all combinations of clk_adjust and write_data_delay have been
+ * tested. For RDIMM, clk_adjust = 4 and write_data_delay = 3 is optimized for
+ * all clocks from 400MT/s to 800MT/s, verified with Kingston KVR800D2D8P6/2G.
+ * For UDIMM, clk_adjust = 8 and write_delay = 5 is optimized for all clocks
+ * from 400MT/s to 800MT/s, verified with Micron MT18HTF25672AY-800E1.
  */
-
-
-/* XXX: these values need to be checked for all interleaving modes.  */
-/* XXX: No reliable dual-rank 800 MHz setting has been found.  It may
- *      seem reliable, but errors will appear when memory intensive
- *      program is run. */
-/* XXX: Single rank at 800 MHz is OK.  */
-const board_specific_parameters_t board_specific_parameters[][20] = {
+const board_specific_parameters_t board_specific_parameters_udimm[][20] = {
        {
-       /*      memory controller 0                     */
-       /*        lo|  hi|  num|  clk| cpo|wrdata|2T    */
-       /*       mhz| mhz|ranks|adjst|    | delay|      */
-               {  0, 333,    2,    6,   7,    3,  0},
-               {334, 400,    2,    6,   9,    3,  0},
-               {401, 549,    2,    6,  11,    3,  0},
-               {550, 680,    2,    1,  10,    5,  0},
-               {681, 850,    2,    1,  12,    5,  1},
+       /*
+        *      memory controller 0
+        *        lo|  hi|  num|  clk| cpo|wrdata|2T
+        *       mhz| mhz|ranks|adjst|    | delay|
+        */
+               {  0, 333,    2,    8,   7,    5,  0},
+               {334, 400,    2,    8,   9,    5,  0},
+               {401, 549,    2,    8,  11,    5,  0},
+               {550, 680,    2,    8,  10,    5,  0},
+               {681, 850,    2,    8,  12,    5,  1},
                {  0, 333,    1,    6,   7,    3,  0},
                {334, 400,    1,    6,   9,    3,  0},
                {401, 549,    1,    6,  11,    3,  0},
@@ -79,14 +78,16 @@ const board_specific_parameters_t board_specific_parameters[][20] = {
        },
 
        {
-       /*      memory controller 1                     */
-       /*        lo|  hi|  num|  clk| cpo|wrdata|2T    */
-       /*       mhz| mhz|ranks|adjst|    | delay|      */
-               {  0, 333,    2,     6,  7,    3,  0},
-               {334, 400,    2,     6,  9,    3,  0},
-               {401, 549,    2,     6, 11,    3,  0},
-               {550, 680,    2,     1, 11,    6,  0},
-               {681, 850,    2,     1, 13,    6,  1},
+       /*
+        *      memory controller 1
+        *        lo|  hi|  num|  clk| cpo|wrdata|2T
+        *       mhz| mhz|ranks|adjst|    | delay|
+        */
+               {  0, 333,    2,     8,  7,    5,  0},
+               {334, 400,    2,     8,  9,    5,  0},
+               {401, 549,    2,     8, 11,    5,  0},
+               {550, 680,    2,     8, 11,    5,  0},
+               {681, 850,    2,     8, 13,    5,  1},
                {  0, 333,    1,     6,  7,    3,  0},
                {334, 400,    1,     6,  9,    3,  0},
                {401, 549,    1,     6, 11,    3,  0},
@@ -95,16 +96,56 @@ const board_specific_parameters_t board_specific_parameters[][20] = {
        }
 };
 
+const board_specific_parameters_t board_specific_parameters_rdimm[][20] = {
+       {
+       /*
+        *      memory controller 0
+        *        lo|  hi|  num|  clk| cpo|wrdata|2T
+        *       mhz| mhz|ranks|adjst|    | delay|
+        */
+               {  0, 333,    2,    4,   7,    3,  0},
+               {334, 400,    2,    4,   9,    3,  0},
+               {401, 549,    2,    4,  11,    3,  0},
+               {550, 680,    2,    4,  10,    3,  0},
+               {681, 850,    2,    4,  12,    3,  1},
+       },
+
+       {
+       /*
+        *      memory controller 1
+        *        lo|  hi|  num|  clk| cpo|wrdata|2T
+        *       mhz| mhz|ranks|adjst|    | delay|
+        */
+               {  0, 333,    2,     4,  7,    3,  0},
+               {334, 400,    2,     4,  9,    3,  0},
+               {401, 549,    2,     4, 11,    3,  0},
+               {550, 680,    2,     4, 11,    3,  0},
+               {681, 850,    2,     4, 13,    3,  1},
+       }
+};
+
 void fsl_ddr_board_options(memctl_options_t *popts,
                                dimm_params_t *pdimm,
                                unsigned int ctrl_num)
 {
-       const board_specific_parameters_t *pbsp =
-                               &(board_specific_parameters[ctrl_num][0]);
-       u32 num_params = sizeof(board_specific_parameters[ctrl_num]) /
-                               sizeof(board_specific_parameters[0][0]);
+       const board_specific_parameters_t *pbsp;
+       u32 num_params;
        u32 i;
        ulong ddr_freq;
+       int matched = 0;
+
+       if (!pdimm->n_ranks)
+               return;
+
+       if (popts->registered_dimm_en) {
+               pbsp = &(board_specific_parameters_rdimm[ctrl_num][0]);
+               num_params = sizeof(board_specific_parameters_rdimm[ctrl_num]) /
+                               sizeof(board_specific_parameters_rdimm[0][0]);
+       } else {
+               pbsp = &(board_specific_parameters_udimm[ctrl_num][0]);
+               num_params = sizeof(board_specific_parameters_udimm[ctrl_num]) /
+                               sizeof(board_specific_parameters_udimm[0][0]);
+       }
 
        /* set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in
         * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If
@@ -138,10 +179,15 @@ void fsl_ddr_board_options(memctl_options_t *popts,
                        popts->cpo_override = pbsp->cpo;
                        popts->write_data_delay = pbsp->write_data_delay;
                        popts->twoT_en = pbsp->force_2T;
+                       matched = 1;
+                       break;
                }
                pbsp++;
        }
 
+       if (!matched)
+               printf("Warning: board specific timing not found!\n");
+
        /*
         * Factors to consider for half-strength driver enable:
         *      - number of DIMMs installed