board: samsung: trats: remove the unnecessary codes

These codes are unnecessary, because max8997 should be initialized with
dt-file.
Remove max8997_init() function.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index 7200c2ee0b1e2a51075f2c53335e8780bf399be3..fa297c3d41fa7799c41b84731dd1f22834080a9c 100644 (file)
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -56,13 +56,6 @@ void i2c_init_board(void)
 #ifndef CONFIG_DM_I2C /* TODO(maintainer): Convert to driver model */
        int err;
 
-       /* I2C_5 -> PMIC */
-       err = exynos_pinmux_config(PERIPH_ID_I2C5, PINMUX_FLAG_NONE);
-       if (err) {
-               debug("I2C%d not configured\n", (I2C_5));
-               return;
-       }
-
        /* I2C_8 -> FG */
        gpio_request(EXYNOS4_GPIO_Y40, "i2c_clk");
        gpio_request(EXYNOS4_GPIO_Y41, "i2c_data");
@@ -129,156 +122,6 @@ static void trats_low_power_mode(void)
        writel(0x0, &clk->gate_ip_image);       /* IMAGE */
        writel(0x0, &clk->gate_ip_gps); /* GPS */
 }
-
-static int pmic_init_max8997(void)
-{
-       struct pmic *p = pmic_get("MAX8997_PMIC");
-       int i = 0, ret = 0;
-       u32 val;
-
-       if (pmic_probe(p))
-               return -1;
-
-       /* BUCK1 VARM: 1.2V */
-       val = (1200000 - 650000) / 25000;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val);
-       val = ENBUCK | ACTIVE_DISCHARGE;                /* DVS OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val);
-
-       /* BUCK2 VINT: 1.1V */
-       val = (1100000 - 650000) / 25000;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val);
-       val = ENBUCK | ACTIVE_DISCHARGE;                /* DVS OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val);
-
-
-       /* BUCK3 G3D: 1.1V - OFF */
-       ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val);
-       val &= ~ENBUCK;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val);
-
-       val = (1100000 - 750000) / 50000;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val);
-
-       /* BUCK4 CAMISP: 1.2V - OFF */
-       ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val);
-       val &= ~ENBUCK;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val);
-
-       val = (1200000 - 650000) / 25000;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val);
-
-       /* BUCK5 VMEM: 1.2V */
-       val = (1200000 - 650000) / 25000;
-       for (i = 0; i < 8; i++)
-               ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val);
-
-       val = ENBUCK | ACTIVE_DISCHARGE;                /* DVS OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val);
-
-       /* BUCK6 CAM AF: 2.8V */
-       /* No Voltage Setting Register */
-       /* GNSLCT 3.0X */
-       val = GNSLCT;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val);
-
-       /* BUCK7 VCC_SUB: 2.0V */
-       val = (2000000 - 750000) / 50000;
-       ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val);
-
-       /* LDO1 VADC: 3.3V */
-       val = max8997_reg_ldo(3300000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val);
-
-       /* LDO1 Disable active discharging */
-       ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val);
-       val &= ~LDO_ADE;
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val);
-
-       /* LDO2 VALIVE: 1.1V */
-       val = max8997_reg_ldo(1100000) | EN_LDO;
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val);
-
-       /* LDO3 VUSB/MIPI: 1.1V */
-       val = max8997_reg_ldo(1100000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val);
-
-       /* LDO4 VMIPI: 1.8V */
-       val = max8997_reg_ldo(1800000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val);
-
-       /* LDO5 VHSIC: 1.2V */
-       val = max8997_reg_ldo(1200000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val);
-
-       /* LDO6 VCC_1.8V_PDA: 1.8V */
-       val = max8997_reg_ldo(1800000) | EN_LDO;
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val);
-
-       /* LDO7 CAM_ISP: 1.8V */
-       val = max8997_reg_ldo(1800000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val);
-
-       /* LDO8 VDAC/VUSB: 3.3V */
-       val = max8997_reg_ldo(3300000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val);
-
-       /* LDO9 VCC_2.8V_PDA: 2.8V */
-       val = max8997_reg_ldo(2800000) | EN_LDO;
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val);
-
-       /* LDO10 VPLL: 1.1V */
-       val = max8997_reg_ldo(1100000) | EN_LDO;
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val);
-
-       /* LDO11 TOUCH: 2.8V */
-       val = max8997_reg_ldo(2800000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val);
-
-       /* LDO12 VTCAM: 1.8V */
-       val = max8997_reg_ldo(1800000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val);
-
-       /* LDO13 VCC_3.0_LCD: 3.0V */
-       val = max8997_reg_ldo(3000000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val);
-
-       /* LDO14 MOTOR: 3.0V */
-       val = max8997_reg_ldo(3000000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val);
-
-       /* LDO15 LED_A: 2.8V */
-       val = max8997_reg_ldo(2800000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val);
-
-       /* LDO16 CAM_SENSOR: 1.8V */
-       val = max8997_reg_ldo(1800000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val);
-
-       /* LDO17 VTF: 2.8V */
-       val = max8997_reg_ldo(2800000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val);
-
-       /* LDO18 TOUCH_LED 3.3V */
-       val = max8997_reg_ldo(3300000) | DIS_LDO;       /* OFF */
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val);
-
-       /* LDO21 VDDQ: 1.2V */
-       val = max8997_reg_ldo(1200000) | EN_LDO;
-       ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val);
-
-       /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */
-       val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) |
-               ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2;
-       ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val);
-
-       if (ret) {
-               puts("MAX8997 PMIC setting error!\n");
-               return -1;
-       }
-
-       return 0;
-}
 #endif
 
 int exynos_power_init(void)
@@ -295,9 +138,7 @@ int exynos_power_init(void)
         * The FUEL_GAUGE is marked as I2C9 on the schematic, but connected
         * to logical I2C adapter 1
         */
-       ret = pmic_init(I2C_5);
-       ret |= pmic_init_max8997();
-       ret |= power_fg_init(I2C_9);
+       ret = power_fg_init(I2C_9);
        ret |= power_muic_init(I2C_5);
        ret |= power_bat_init(0);
        if (ret)