include/configs: Use new CONFIG_CMD_* in various m* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/mcc200.h b/include/configs/mcc200.h
index c2324a04c911396e38690d1ad165cc49ca8ef569..10e25f02290fed78728392fe648297543393d0e2 100644 (file)
--- a/include/configs/mcc200.h
+++ b/include/configs/mcc200.h
@@ -40,11 +40,6 @@
 #define BOOTFLAG_COLD          0x01    /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM          0x02    /* Software reboot                      */
 
-#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs                     */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
-#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
-#endif
-
 /*
  * Serial console configuration
  *
@@ -92,22 +87,21 @@
 
 /* USB */
 #define CONFIG_USB_OHCI
-#define ADD_USB_CMD            CFG_CMD_USB | CFG_CMD_FAT
 #define CONFIG_USB_STORAGE
 /* automatic software updates (see board/mcc200/auto_update.c) */
 #define CONFIG_AUTO_UPDATE 1
 
+
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               ADD_USB_CMD     | \
-                               CFG_CMD_BEDBUG  | \
-                               CFG_CMD_FAT     | \
-                               CFG_CMD_I2C)
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_USB
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 /*
  * Autobooting
@@ -291,7 +285,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size      */
@@ -307,6 +301,11 @@
 
 #define CFG_HZ                 1000    /* decrementer freq: 1 ms ticks */
 
+#define CFG_CACHELINE_SIZE     32      /* For MPC5xxx CPUs                     */
+#if defined(CONFIG_CMD_KGDB)
+#  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value        */
+#endif
+
 /*
  * Various low-level settings
  */

diff --git a/include/configs/ml300.h b/include/configs/ml300.h
index 6762cd61eae5b50d11a259e592bfa588a90a8d3d..423c6ebbb77403abd5107b835986d9cf02341367 100644 (file)
--- a/include/configs/ml300.h
+++ b/include/configs/ml300.h
@@ -87,13 +87,19 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CFG_LOADS_BAUD_CHANGE  1       /* allow baudrate change        */
 
-#define REMOVE_COMMANDS               (CFG_CMD_FLASH | CFG_CMD_LOADS | CFG_CMD_FAT | \
-                               CFG_CMD_IMLS )
-#define CONFIG_COMMANDS               ((CONFIG_CMD_DFL | CFG_CMD_NET) \
-                               & ~REMOVE_COMMANDS)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_NET
+
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_FAT
+#undef CONFIG_CMD_IMLS
+
 
 /* #define CONFIG_SYS_CLK_FREQ XPAR_CORE_CLOCK_FREQ_HZ */
 /* 300000000 */

diff --git a/include/configs/ml401.h b/include/configs/ml401.h
index 3db287784da8ba5f3449771273a49df0d91293bc..9537008e040bdb572b2b119175b88716fca55456 100644 (file)
--- a/include/configs/ml401.h
+++ b/include/configs/ml401.h
@@ -145,82 +145,45 @@
        #define CFG_FLASH_PROTECTION            /* hardware flash protection */
 #endif /* !FLASH */
 
-#ifdef FLASH
-       #ifdef  RAMENV
-       #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
-                               CFG_CMD_MEMORY |\
-                               CFG_CMD_MISC |\
-                               CFG_CMD_AUTOSCRIPT |\
-                               CFG_CMD_IRQ |\
-                               CFG_CMD_ASKENV |\
-                               CFG_CMD_BDI |\
-                               CFG_CMD_RUN |\
-                               CFG_CMD_LOADS |\
-                               CFG_CMD_LOADB |\
-                               CFG_CMD_IMI |\
-                               CFG_CMD_NET |\
-                               CFG_CMD_CACHE |\
-                               CFG_CMD_FAT |\
-                               CFG_CMD_EXT2 |\
-                               CFG_CMD_JFFS2 |\
-                               CFG_CMD_ECHO |\
-                               CFG_CMD_IMLS |\
-                               CFG_CMD_FLASH |\
-                               CFG_CMD_MFSL |\
-                               CFG_CMD_PING \
-                               )
-       #else   /* !RAMENV */
-       #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
-                               CFG_CMD_MEMORY |\
-                               CFG_CMD_MISC |\
-                               CFG_CMD_AUTOSCRIPT |\
-                               CFG_CMD_IRQ |\
-                               CFG_CMD_ASKENV |\
-                               CFG_CMD_BDI |\
-                               CFG_CMD_RUN |\
-                               CFG_CMD_LOADS |\
-                               CFG_CMD_LOADB |\
-                               CFG_CMD_IMI |\
-                               CFG_CMD_NET |\
-                               CFG_CMD_CACHE |\
-                               CFG_CMD_IMLS |\
-                               CFG_CMD_FLASH |\
-                               CFG_CMD_PING |\
-                               CFG_CMD_ENV |\
-                               CFG_CMD_FAT |\
-                               CFG_CMD_EXT2 |\
-                               CFG_CMD_JFFS2 |\
-                               CFG_CMD_ECHO |\
-                               CFG_CMD_MFSL |\
-                               CFG_CMD_SAVES \
-                               )
 
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_AUTOSCRIPT
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_IMI
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_LOADS
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MFSL
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_RUN
+
+#if defined(FLASH)
+       #define CONFIG_CMD_ECHO
+       #define CONFIG_CMD_FLASH
+       #define CONFIG_CMD_IMLS
+       #define CONFIG_CMD_JFFS2
+
+       #if !defined(RAMENV)
+               #define CONFIG_CMD_ENV
+               #define CONFIG_CMD_SAVES
        #endif
+#endif
+
+
 
-#else  /* !FLASH */
-       #define CONFIG_COMMANDS (CONFIG__CMD_DFL |\
-                               CFG_CMD_MEMORY |\
-                               CFG_CMD_MISC |\
-                               CFG_CMD_AUTOSCRIPT |\
-                               CFG_CMD_IRQ |\
-                               CFG_CMD_ASKENV |\
-                               CFG_CMD_BDI |\
-                               CFG_CMD_RUN |\
-                               CFG_CMD_LOADS |\
-                               CFG_CMD_FAT |\
-                               CFG_CMD_EXT2 |\
-                               CFG_CMD_LOADB |\
-                               CFG_CMD_IMI |\
-                               CFG_CMD_NET |\
-                               CFG_CMD_CACHE |\
-                               CFG_CMD_MFSL |\
-                               CFG_CMD_PING \
-                               )
-#endif /* !FLASH */
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 /* JFFS2 partitions */
 #define CONFIG_JFFS2_CMDLINE   /* mtdparts command line support */
 #define MTDIDS_DEFAULT         "nor0=ml401-0"

diff --git a/include/configs/modnet50.h b/include/configs/modnet50.h
index 20287674faba014da69514eb3879144dccd77b9c..33ae43efe881df00de6da1a254e8be1464695750 100644 (file)
--- a/include/configs/modnet50.h
+++ b/include/configs/modnet50.h
@@ -65,10 +65,14 @@
 
 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS                ((CONFIG_CMD_DFL | CFG_CMD_JFFS2))
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
 
 #define CONFIG_NETMASK          255.255.255.0
 #define CONFIG_IPADDR          192.168.30.2
@@ -81,7 +85,7 @@
 #define CONFIG_BOOTCOMMAND     "bootm 0x10020000 0x100a0000"
 #define CONFIG_BOOTARGS        "console=ttyS0,38400 initrd=0x100a0040,530K root=/dev/ram keepinitrd"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif

diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h
index e3899a5ab4066da21b7d8b21f12687c83f923697..7a61e4939566e0a281ab39c2af04cd5b275a8ee7 100644 (file)
--- a/include/configs/motionpro.h
+++ b/include/configs/motionpro.h
@@ -37,28 +37,26 @@
 
 
 /*
- * Supported commands
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_IMMAP   | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_BEDBUG  | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_IDE     | \
-                               CFG_CMD_FAT     | \
-                               CFG_CMD_JFFS2   | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_DTT)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_BEDBUG
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_JFFS2
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_DTT
 
 
 /*

diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 04f1f240808124f78181b062f8b4fe2dbbf0e1a3..3a6224012a2ceb0335b34a8a8e153d50a26efcfd 100644 (file)
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -123,36 +123,44 @@
 
 #define CONFIG_BOOTDELAY      3
 
-#ifdef CONFIG_HARD_I2C
-#define CONFIG_COMMANDS                \
-                      ((CONFIG_CMD_DFL | \
-                       CFG_CMD_DATE    | \
-                       CFG_CMD_DHCP    | \
-                       CFG_CMD_EEPROM  | \
-                       CFG_CMD_I2C     | \
-                       CFG_CMD_NFS     | \
-                       CFG_CMD_SNTP    | \
-                       CFG_CMD_MISC))
-#else
-#define CONFIG_COMMANDS                \
-                      ((CONFIG_CMD_DFL | \
-                       CFG_CMD_DHCP    | \
-                       CFG_CMD_NFS     | \
-                       CFG_CMD_SNTP    | \
-                       CFG_CMD_USB      | \
-                       CFG_CMD_CACHE)  & \
-                     ~(CFG_CMD_BDI | \
-                       CFG_CMD_IMI | \
-                       CFG_CMD_AUTOSCRIPT | \
-                       CFG_CMD_FPGA | \
-                       CFG_CMD_MISC | \
-                       CFG_CMD_LOADS ))
+
+#if !defined(CONFIG_HARD_I2C)
 #define CONFIG_TIMESTAMP
 #endif
-#define CFG_LONGHELP
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_SNTP
+
+#if defined(CONFIG_HARD_I2C)
+
+    #define CONFIG_CMD_DATE
+    #define CONFIG_CMD_EEPROM
+    #define CONFIG_CMD_I2C
+    #define CONFIG_CMD_MISC
+
+#else
+
+    #define CONFIG_CMD_USB
+    #define CONFIG_CMD_CACHE
+
+    #undef CONFIG_CMD_AUTOSCRIPT
+    #undef CONFIG_CMD_BDI
+    #undef CONFIG_CMD_FPGA
+    #undef CONFIG_CMD_IMI
+    #undef CONFIG_CMD_LOADS
+    #undef CONFIG_CMD_MISC
+
+#endif
+
+
+#define CFG_LONGHELP
 
 #define CONFIG_NR_DRAM_BANKS   1
 #define PHYS_SDRAM             0x20000000

diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 243a3f6c8fc01478cfbd1353046a88c52f51a3ed..36ce9bf8eea0612f12ebded7d2ba735d605d79e6 100644 (file)
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -149,22 +149,25 @@
 #define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT | \
                                CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS (CONFIG_CMD_DFL \
-               | CFG_CMD_ASKENV \
-               | CFG_CMD_CACHE \
-               | CFG_CMD_PCI \
-               | CFG_CMD_I2C \
-               | CFG_CMD_SDRAM \
-               | CFG_CMD_EEPROM \
-               | CFG_CMD_FLASH \
-               | CFG_CMD_ENV \
-               | CFG_CMD_BSP \
-               | CFG_CMD_DHCP \
-               | CFG_CMD_PING \
-               | CFG_CMD_DATE)
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_BSP
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+
 
 /*set date in u-boot*/
 #define CONFIG_RTC_M48T35A
@@ -182,7 +185,7 @@
 #define CFG_LONGHELP           /* undef to save memory */
 #define CFG_PROMPT     "=> "   /* Monitor Command Prompt */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size */
 #define CONFIG_KGDB_BAUDRATE   115200  /* speed to run kgdb serial port at */
 #else
@@ -387,7 +390,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     32      /* For all MPC74xx CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/mx1ads.h b/include/configs/mx1ads.h
index 7f3dfd5c987833b2ed533a11abf46846576d3231..0ae2780f202cbea769141f386f65e3e2ce031d83 100644 (file)
--- a/include/configs/mx1ads.h
+++ b/include/configs/mx1ads.h
@@ -78,25 +78,23 @@
 
 #define CONFIG_BAUDRATE                115200
 
-/***********************************************************
- * Command definition
- ***********************************************************/
 
-#define CONFIG_COMMANDS \
-                       (CONFIG_CMD_DFL  | \
-                       CFG_CMD_CACHE    | \
-                       CFG_CMD_REGINFO  | \
-                       CFG_CMD_ELF)
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_ELF
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
 
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTARGS                "root=/dev/msdk mem=48M"
 #define CONFIG_BOOTFILE                "mx1ads"
 #define CONFIG_BOOTCOMMAND     "tftp; bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   115200          /* speed to run kgdb serial port */
                                                /* what's this ? it's not used anywhere */
 #define CONFIG_KGDB_SER_INDEX  1               /* which serial port to use */

diff --git a/include/configs/mx1fs2.h b/include/configs/mx1fs2.h
index 9816be8dc4fa10d76944ae709f7feb8dc58cf187..47ca0f1eee2432c8d133e406161ac9217d274316 100644 (file)
--- a/include/configs/mx1fs2.h
+++ b/include/configs/mx1fs2.h
@@ -34,22 +34,21 @@
 #undef _CONFIG_UART4 /* internal uart 4 */
 #undef CONFIG_SILENT_CONSOLE  /* use this to disable output */
 
+
 /*
- * Definition of u-boot build in commands. Check out CONFIG_CMD_DFL if
- * neccessary in include/cmd_confdefs.h file. (Un)comment for getting
- * functionality or size of u-boot code.
+ * Command line configuration.
  */
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL          \
-                               & ~CFG_CMD_LOADS         \
-                               & ~CFG_CMD_CONSOLE       \
-                               & ~CFG_CMD_AUTOSCRIPT    \
-                               & ~CFG_CMD_NET           \
-                               & ~CFG_CMD_PING          \
-                               & ~CFG_CMD_DHCP          \
-                               | CFG_CMD_JFFS2          \
-                               )
-
-#include <cmd_confdefs.h>
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
+#undef CONFIG_CMD_LOADS
+#undef CONFIG_CMD_CONSOLE
+#undef CONFIG_CMD_AUTOSCRIPT
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_PING
+#undef CONFIG_CMD_DHCP
+
 
 /*
  * Boot options. Setting delay to -1 stops autostart count down.