LIBS += drivers/spi/libspi.a
ifeq ($(CPU),mpc83xx)
LIBS += drivers/qe/qe.a
+LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a
endif
ifeq ($(CPU),mpc85xx)
LIBS += drivers/qe/qe.a
#
-# Copyright 2009 Freescale Semiconductor, Inc.
+# Copyright 2009-2010 Freescale Semiconductor, Inc.
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
LIB = $(obj)lib8xxx.a
+ifneq ($(CPU),mpc83xx)
COBJS-y += cpu.o
-COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
COBJS-$(CONFIG_PCI) += pci_cfg.o
+endif
+
+COBJS-$(CONFIG_OF_LIBFDT) += fdt.o
SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
/*
- * Copyright 2009 Freescale Semiconductor, Inc.
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
*
* This file is derived from arch/powerpc/cpu/mpc85xx/cpu.c and
* arch/powerpc/cpu/mpc86xx/cpu.c. Basically this file contains
#include <libfdt.h>
#include <fdt_support.h>
+#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
void ft_fixup_num_cores(void *blob) {
int off, num_cores, del_cores;
debug ("deleted %d extra core entry entries from device tree\n",
del_cores);
}
+#endif /* defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) */
+
+#ifdef CONFIG_HAS_FSL_DR_USB
+void fdt_fixup_dr_usb(void *blob, bd_t *bd)
+{
+ char *mode;
+ char *type;
+ const char *compat = "fsl-usb2-dr";
+ const char *prop_mode = "dr_mode";
+ const char *prop_type = "phy_type";
+ int node_offset;
+ int err;
+
+ mode = getenv("usb_dr_mode");
+ type = getenv("usb_phy_type");
+ if (!mode && !type)
+ return;
+
+ node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
+ if (node_offset < 0) {
+ printf("WARNING: could not find compatible node %s: %s.\n",
+ compat, fdt_strerror(node_offset));
+ return;
+ }
+
+ if (mode) {
+ err = fdt_setprop(blob, node_offset, prop_mode, mode,
+ strlen(mode) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_mode, compat, fdt_strerror(err));
+ }
+
+ if (type) {
+ err = fdt_setprop(blob, node_offset, prop_type, type,
+ strlen(type) + 1);
+ if (err < 0)
+ printf("WARNING: could not set %s for %s: %s.\n",
+ prop_type, compat, fdt_strerror(err));
+ }
+}
+#endif /* CONFIG_HAS_FSL_DR_USB */
+
+#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
+/*
+ * update crypto node properties to a specified revision of the SEC
+ * called with sec_rev == 0 if not on an mpc8xxxE processor
+ */
+void fdt_fixup_crypto_node(void *blob, int sec_rev)
+{
+ const struct sec_rev_prop {
+ u32 sec_rev;
+ u32 num_channels;
+ u32 channel_fifo_len;
+ u32 exec_units_mask;
+ u32 descriptor_types_mask;
+ } sec_rev_prop_list [] = {
+ { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
+ { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
+ { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
+ { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
+ { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
+ { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
+ { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
+ };
+ char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
+ sizeof("fsl,secX.Y")];
+ int crypto_node, sec_idx, err;
+ char *p;
+ u32 val;
+
+ /* locate crypto node based on lowest common compatible */
+ crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
+ if (crypto_node == -FDT_ERR_NOTFOUND)
+ return;
+
+ /* delete it if not on an E-processor */
+ if (crypto_node > 0 && !sec_rev) {
+ fdt_del_node(blob, crypto_node);
+ return;
+ }
+
+ /* else we got called for possible uprev */
+ for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
+ if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
+ break;
+
+ if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
+ puts("warning: unknown SEC revision number\n");
+ return;
+ }
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
+ err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
+ err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
+ err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+
+ val = 0;
+ while (sec_idx >= 0) {
+ p = compat_strlist + val;
+ val += sprintf(p, "fsl,sec%d.%d",
+ (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
+ sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
+ sec_idx--;
+ }
+ err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
+ if (err < 0)
+ printf("WARNING: could not set crypto property: %s\n",
+ fdt_strerror(err));
+}
+#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */
}
}
-#ifdef CONFIG_HAS_FSL_DR_USB
-void fdt_fixup_dr_usb(void *blob, bd_t *bd)
-{
- char *mode;
- char *type;
- const char *compat = "fsl-usb2-dr";
- const char *prop_mode = "dr_mode";
- const char *prop_type = "phy_type";
- int node_offset;
- int err;
-
- mode = getenv("usb_dr_mode");
- type = getenv("usb_phy_type");
- if (!mode && !type)
- return;
-
- node_offset = fdt_node_offset_by_compatible(blob, 0, compat);
- if (node_offset < 0) {
- printf("WARNING: could not find compatible node %s: %s.\n",
- compat, fdt_strerror(node_offset));
- return;
- }
-
- if (mode) {
- err = fdt_setprop(blob, node_offset, prop_mode, mode,
- strlen(mode) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_mode, compat, fdt_strerror(err));
- }
-
- if (type) {
- err = fdt_setprop(blob, node_offset, prop_type, type,
- strlen(type) + 1);
- if (err < 0)
- printf("WARNING: could not set %s for %s: %s.\n",
- prop_type, compat, fdt_strerror(err));
- }
-}
-#endif /* CONFIG_HAS_FSL_DR_USB */
-
-#if defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx)
-/*
- * update crypto node properties to a specified revision of the SEC
- * called with sec_rev == 0 if not on an mpc8xxxE processor
- */
-void fdt_fixup_crypto_node(void *blob, int sec_rev)
-{
- const struct sec_rev_prop {
- u32 sec_rev;
- u32 num_channels;
- u32 channel_fifo_len;
- u32 exec_units_mask;
- u32 descriptor_types_mask;
- } sec_rev_prop_list [] = {
- { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */
- { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */
- { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */
- { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */
- { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */
- { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */
- { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */
- };
- char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) *
- sizeof("fsl,secX.Y")];
- int crypto_node, sec_idx, err;
- char *p;
- u32 val;
-
- /* locate crypto node based on lowest common compatible */
- crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0");
- if (crypto_node == -FDT_ERR_NOTFOUND)
- return;
-
- /* delete it if not on an E-processor */
- if (crypto_node > 0 && !sec_rev) {
- fdt_del_node(blob, crypto_node);
- return;
- }
-
- /* else we got called for possible uprev */
- for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++)
- if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev)
- break;
-
- if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) {
- puts("warning: unknown SEC revision number\n");
- return;
- }
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels);
- err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask);
- err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask);
- err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len);
- err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-
- val = 0;
- while (sec_idx >= 0) {
- p = compat_strlist + val;
- val += sprintf(p, "fsl,sec%d.%d",
- (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8,
- sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1;
- sec_idx--;
- }
- err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, val);
- if (err < 0)
- printf("WARNING: could not set crypto property: %s\n",
- fdt_strerror(err));
-}
-#endif /* defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) */
-
/* Resize the fdt to its actual size + a bit of padding */
int fdt_resize(void *blob)
{
projects / u-boot.git / commitdiff