mxs: Reset the EMI block on mx23

The real reason for memory instability was the fact that the EMI block
was gated and not reset throughout the boards' operation. This patch
resets the EMI block properly while also reverts the memory voltage bump.
The memory stability issues were caused by the EMI not being reset properly
and thus there is no longer need to run the memory at higher voltage than
it ought to run at.

This partly reverts 8303ed128a55519f19c5f11087032d4bc4e0537a .

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Otavio Salvador <otavio@ossystems.com.br>
Cc: Stefano Babic <sbabic@denx.de>

diff --git a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
index f8392f6398a20d48379efca2041fdcb349cb5197..4a0a5aac7c01d5fe00c050a48174d4e502913808 100644 (file)
--- a/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
+++ b/arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c
@@ -27,6 +27,7 @@
 #include <config.h>
 #include <asm/io.h>
 #include <asm/arch/imx-regs.h>
+#include <asm/arch/sys_proto.h>
 #include <linux/compiler.h>
 
 #include "mxs_init.h"
@@ -229,7 +230,7 @@ static void mx23_mem_setup_vddmem(void)
        struct mxs_power_regs *power_regs =
                (struct mxs_power_regs *)MXS_POWER_BASE;
 
-       writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+       writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
                POWER_VDDMEMCTRL_ENABLE_ILIMIT |
                POWER_VDDMEMCTRL_ENABLE_LINREG |
                POWER_VDDMEMCTRL_PULLDOWN_ACTIVE,
@@ -237,13 +238,20 @@ static void mx23_mem_setup_vddmem(void)
 
        early_delay(10000);
 
-       writel((0x12 << POWER_VDDMEMCTRL_TRG_OFFSET) |
+       writel((0x10 << POWER_VDDMEMCTRL_TRG_OFFSET) |
                POWER_VDDMEMCTRL_ENABLE_LINREG,
                &power_regs->hw_power_vddmemctrl);
 }
 
 static void mx23_mem_init(void)
 {
+       /*
+        * Reset/ungate the EMI block. This is essential, otherwise the system
+        * suffers from memory instability. This thing is mx23 specific and is
+        * no longer present on mx28.
+        */
+       mxs_reset_block((struct mxs_register_32 *)MXS_EMI_BASE);
+
        mx23_mem_setup_vddmem();
 
        /*