omap3_beagle: Finish current outstanding DM migrations

At this point in time we can now remove our legacy code and switch to
enabling DM for USB and Ethernet.

Cc: Derald D. Woods <woods.technical@gmail.com>
Cc: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Derald D. Woods <woods.technical@gmail.com>

diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 9139ad87d400b0de8b59e30531421c48271fa165..9ccd566da3706bb3ffd313dcb21d1e76a9fdbd21 100644 (file)
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -40,11 +40,6 @@
 #include "beagle.h"
 #include <command.h>
 
-#ifdef CONFIG_USB_EHCI_HCD
-#include <usb.h>
-#include <asm/ehci-omap.h>
-#endif
-
 #define TWL4030_I2C_BUS                        0
 #define EXPANSION_EEPROM_I2C_BUS       1
 #define EXPANSION_EEPROM_I2C_ADDRESS   0x50
@@ -297,33 +292,6 @@ static void beagle_dvi_pup(void)
 }
 #endif
 
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-static struct musb_hdrc_config musb_config = {
-       .multipoint     = 1,
-       .dyn_fifo       = 1,
-       .num_eps        = 16,
-       .ram_bits       = 12,
-};
-
-static struct omap_musb_board_data musb_board_data = {
-       .interface_type = MUSB_INTERFACE_ULPI,
-};
-
-static struct musb_hdrc_platform_data musb_plat = {
-#if defined(CONFIG_USB_MUSB_HOST)
-       .mode           = MUSB_HOST,
-#elif defined(CONFIG_USB_MUSB_GADGET)
-       .mode           = MUSB_PERIPHERAL,
-#else
-#error "Please define either CONFIG_USB_MUSB_HOST or CONFIG_USB_MUSB_GADGET"
-#endif
-       .config         = &musb_config,
-       .power          = 100,
-       .platform_ops   = &omap2430_ops,
-       .board_data     = &musb_board_data,
-};
-#endif
-
 /*
  * Routine: misc_init_r
  * Description: Configure board specific parts
@@ -506,10 +474,6 @@ int misc_init_r(void)
        omap3_dss_enable();
 #endif
 
-#ifdef CONFIG_USB_MUSB_OMAP2PLUS
-       musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
-#endif
-
        if (generate_fake_mac)
                omap_die_id_usbethaddr();
 
@@ -548,37 +512,3 @@ void board_mmc_power_init(void)
        twl4030_power_mmc_init(0);
 }
 #endif
-
-#if defined(CONFIG_USB_EHCI_HCD) && !defined(CONFIG_SPL_BUILD)
-/* Call usb_stop() before starting the kernel */
-void show_boot_progress(int val)
-{
-       if (val == BOOTSTAGE_ID_RUN_OS)
-               usb_stop();
-}
-
-static struct omap_usbhs_board_data usbhs_bdata = {
-       .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-       .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-       .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED
-};
-
-int ehci_hcd_init(int index, enum usb_init_type init,
-               struct ehci_hccr **hccr, struct ehci_hcor **hcor)
-{
-       return omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor);
-}
-
-int ehci_hcd_stop(int index)
-{
-       return omap_ehci_hcd_stop();
-}
-
-#endif /* CONFIG_USB_EHCI_HCD */
-
-#if defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)
-int board_eth_init(bd_t *bis)
-{
-       return usb_eth_initialize(bis);
-}
-#endif

diff --git a/configs/omap3_beagle_defconfig b/configs/omap3_beagle_defconfig
index af5b8ea872a6ba0149d52994492689a1f75e720a..b08ffc062d297a3003e0bb03582ed5976cb65333 100644 (file)
--- a/configs/omap3_beagle_defconfig
+++ b/configs/omap3_beagle_defconfig
@@ -73,10 +73,13 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y
 CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
 CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000
 CONFIG_SPL_NAND_SIMPLE=y
+CONFIG_DM_ETH=y
 CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_OMAP3_SPI=y
 CONFIG_USB=y
+CONFIG_DM_USB=y
+# CONFIG_SPL_DM_USB is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OMAP3=y
 CONFIG_USB_MUSB_GADGET=y