rockchip: rk3328: add rock-pi-e dts file

The ROCK-PI-E is a credit card size SBC based on Rockchip RK3328
Quad-Core ARM Cortex A53.

    Net - Dual ethernet port, 1 X Gbe, 1 X 100M
    USB - USB 3.0
    DC  - USB-Type C, 5V 2A
    Storage - TF card, eMMC

Just build idbloader.img and u-boot.itb for Rockpi E board and
follow the blow steps to replace the relevant partition.

    dd if=idbloader.img of=/dev/sdcard seek=64 conv=notrunc
    dd if=u-boot.itb of=/dev/sdcard seek=16384 conv=notrunc

Signed-off-by: Banglang Huang <banglang.huang@foxmail.com>

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c6af87cf5e89221ec853fd69644e04b6e4877d46..61afe94a056c68d3eea79f95509c3212c22082dd 100644 (file)
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -107,7 +107,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
 dtb-$(CONFIG_ROCKCHIP_RK3328) += \
        rk3328-evb.dtb \
        rk3328-roc-cc.dtb \
-       rk3328-rock64.dtb
+       rk3328-rock64.dtb \
+       rk3328-rock-pi-e.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3368) += \
        rk3368-lion.dtb \

diff --git a/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
new file mode 100644 (file)
index 0000000..bf5b1f3
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr3-666.dtsi"
+
+&gpio0 {
+       u-boot,dm-spl;
+};
+
+&pinctrl {
+       u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+       u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+       u-boot,dm-spl;
+};
+
+&usb_host0_xhci {
+       vbus-supply = <&vcc5v0_host_xhci>;
+       status = "okay";
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+       u-boot,dm-spl;
+};

diff --git a/arch/arm/dts/rk3328-rock-pi-e.dts b/arch/arm/dts/rk3328-rock-pi-e.dts
new file mode 100644 (file)
index 0000000..4b9f9a8
--- /dev/null
+++ b/arch/arm/dts/rk3328-rock-pi-e.dts
@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+       model = "Radxa Rockpi E";
+       compatible = "radxa,rock-pi-e", "rockchip,rk3328";
+
+       chosen {
+       stdout-path = "serial2:1500000n8";
+       };
+
+       gmac_clkin: external-gmac-clock {
+       compatible = "fixed-clock";
+       clock-frequency = <125000000>;
+       clock-output-names = "gmac_clkin";
+       #clock-cells = <0>;
+       };
+
+       vcc_sd: sdmmc-regulator {
+       compatible = "regulator-fixed";
+       gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc0m1_gpio>;
+       regulator-name = "vcc_sd";
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       vin-supply = <&vcc_io>;
+       };
+
+       vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+       compatible = "regulator-fixed";
+       enable-active-high;
+       regulator-name = "vcc5v0_host_xhci";
+       gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+       regulator-min-microvolt = <5000000>;
+       regulator-max-microvolt = <5000000>;
+       };
+
+       vcc_sys: vcc-sys {
+       compatible = "regulator-fixed";
+       regulator-name = "vcc_sys";
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-min-microvolt = <5000000>;
+       regulator-max-microvolt = <5000000>;
+       };
+};
+
+&cpu0 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+       cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+       bus-width = <8>;
+       cap-mmc-highspeed;
+       mmc-hs200-1_8v;
+       supports-emmc;
+       disable-wp;
+       non-removable;
+       num-slots = <1>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+       vmmc-supply = <&vcc_io>;
+       vqmmc-supply = <&vcc18_emmc>;
+       status = "okay";
+};
+
+&gmac2io {
+       assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+       assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+       clock_in_out = "input";
+       phy-supply = <&vcc_io>;
+       phy-mode = "rgmii";
+       pinctrl-names = "default";
+       pinctrl-0 = <&rgmiim1_pins>;
+       snps,force_thresh_dma_mode;
+       snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+       snps,reset-active-low;
+       snps,reset-delays-us = <0 10000 50000>;
+       tx_delay = <0x26>;
+       rx_delay = <0x11>;
+       status = "okay";
+};
+
+&i2c1 {
+       status = "okay";
+
+       rk805: rk805@18 {
+       compatible = "rockchip,rk805";
+       status = "okay";
+       reg = <0x18>;
+       interrupt-parent = <&gpio2>;
+       interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+       #clock-cells = <1>;
+       clock-output-names = "xin32k", "rk805-clkout2";
+       pinctrl-names = "default";
+       pinctrl-0 = <&pmic_int_l>;
+       rockchip,system-power-controller;
+       wakeup-source;
+
+       vcc1-supply = <&vcc_sys>;
+       vcc2-supply = <&vcc_sys>;
+       vcc3-supply = <&vcc_sys>;
+       vcc4-supply = <&vcc_sys>;
+       vcc5-supply = <&vcc_io>;
+       vcc6-supply = <&vcc_sys>;
+
+       regulators {
+       vdd_logic: DCDC_REG1 {
+       regulator-name = "vdd_logic";
+       regulator-min-microvolt = <712500>;
+       regulator-max-microvolt = <1450000>;
+       regulator-ramp-delay = <12500>;
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-state-mem {
+       regulator-on-in-suspend;
+       regulator-suspend-microvolt = <1000000>;
+       };
+       };
+
+       vdd_arm: DCDC_REG2 {
+       regulator-name = "vdd_arm";
+       regulator-min-microvolt = <712500>;
+       regulator-max-microvolt = <1450000>;
+       regulator-ramp-delay = <12500>;
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-state-mem {
+       regulator-on-in-suspend;
+       regulator-suspend-microvolt = <950000>;
+       };
+       };
+
+       vcc_ddr: DCDC_REG3 {
+       regulator-name = "vcc_ddr";
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-state-mem {
+       regulator-on-in-suspend;
+       };
+       };
+
+       vcc_io: DCDC_REG4 {
+       regulator-name = "vcc_io";
+       regulator-min-microvolt = <3300000>;
+       regulator-max-microvolt = <3300000>;
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-state-mem {
+       regulator-on-in-suspend;
+       regulator-suspend-microvolt = <3300000>;
+       };
+       };
+
+       vcc_18: LDO_REG1 {
+       regulator-name = "vcc_18";
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-state-mem {
+       regulator-on-in-suspend;
+       regulator-suspend-microvolt = <1800000>;
+       };
+       };
+
+       vcc18_emmc: LDO_REG2 {
+       regulator-name = "vcc18_emmc";
+       regulator-min-microvolt = <1800000>;
+       regulator-max-microvolt = <1800000>;
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-state-mem {
+       regulator-on-in-suspend;
+       regulator-suspend-microvolt = <1800000>;
+       };
+       };
+
+       vdd_10: LDO_REG3 {
+       regulator-name = "vdd_10";
+       regulator-min-microvolt = <1000000>;
+       regulator-max-microvolt = <1000000>;
+       regulator-always-on;
+       regulator-boot-on;
+       regulator-state-mem {
+       regulator-on-in-suspend;
+       regulator-suspend-microvolt = <1000000>;
+       };
+       };
+       };
+       };
+};
+
+&io_domains {
+       status = "okay";
+
+       vccio1-supply = <&vcc_io>;
+       vccio2-supply = <&vcc18_emmc>;
+       vccio3-supply = <&vcc_io>;
+       vccio4-supply = <&vcc_io>;
+       vccio5-supply = <&vcc_io>;
+       vccio6-supply = <&vcc_io>;
+       pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+       pmic {
+       pmic_int_l: pmic-int-l {
+       rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+       };
+       };
+};
+
+&sdmmc {
+       bus-width = <4>;
+       cap-mmc-highspeed;
+       cap-sd-highspeed;
+       card-detect-delay = <200>;
+       disable-wp;
+       max-frequency = <150000000>;
+       num-slots = <1>;
+       pinctrl-names = "default";
+       pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+       supports-sd;
+       vmmc-supply = <&vcc_sd>;
+       status = "okay";
+};
+
+&saradc {
+       status = "okay";
+};
+
+&uart2 {
+       status = "okay";
+};
+
+&usb20_otg {
+       status = "okay";
+};
+
+&usb_host0_ehci {
+       status = "okay";
+};
+
+&usb_host0_ohci {
+       status = "okay";
+};