* Svyatoslav Ryhel <clamor95@gmail.com>
*/
-#include <common.h>
#include <dm.h>
#include <fdt_support.h>
-#include <i2c.h>
-#include <log.h>
#include <asm/arch/pinmux.h>
#include <asm/arch/gp_padctrl.h>
-#include <asm/arch/gpio.h>
-#include <asm/gpio.h>
-#include <linux/delay.h>
-#include "pinmux-config-grouper.h"
-
-#define TPS65911_I2C_ADDRESS 0x2D
-
-#define TPS65911_REG_LDO1 0x30
-#define TPS65911_REG_DEVCTRL 0x3F
-#define DEVCTRL_PWR_OFF_MASK BIT(7)
-#define DEVCTRL_DEV_ON_MASK BIT(2)
-#define DEVCTRL_DEV_OFF_MASK BIT(0)
-
-#define MAX77663_I2C_ADDRESS 0x3C
-
-#define MAX77663_REG_SD2 0x18
-#define MAX77663_REG_LDO3 0x29
-#define MAX77663_REG_ONOFF_CFG1 0x41
-#define ONOFF_PWR_OFF BIT(1)
-
-#ifdef CONFIG_CMD_POWEROFF
-#ifdef CONFIG_GROUPER_TPS65911
-int do_poweroff(struct cmd_tbl *cmdtp,
- int flag, int argc, char *const argv[])
-{
- struct udevice *dev;
- uchar data_buffer[1];
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
- if (ret) {
- log_debug("cannot find PMIC I2C chip\n");
- return 0;
- }
-
- ret = dm_i2c_read(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
- if (ret)
- return ret;
-
- data_buffer[0] |= DEVCTRL_PWR_OFF_MASK;
-
- ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
- if (ret)
- return ret;
-
- data_buffer[0] |= DEVCTRL_DEV_OFF_MASK;
- data_buffer[0] &= ~DEVCTRL_DEV_ON_MASK;
-
- ret = dm_i2c_write(dev, TPS65911_REG_DEVCTRL, data_buffer, 1);
- if (ret)
- return ret;
-
- // wait some time and then print error
- mdelay(5000);
-
- printf("Failed to power off!!!\n");
- return 1;
-}
-#endif /* CONFIG_GROUPER_TPS65911 */
-
-#ifdef CONFIG_GROUPER_MAX77663
-int do_poweroff(struct cmd_tbl *cmdtp,
- int flag, int argc, char *const argv[])
-{
- struct udevice *dev;
- uchar data_buffer[1];
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev);
- if (ret) {
- log_debug("cannot find PMIC I2C chip\n");
- return 0;
- }
-
- ret = dm_i2c_read(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
- if (ret)
- return ret;
-
- data_buffer[0] |= ONOFF_PWR_OFF;
-
- ret = dm_i2c_write(dev, MAX77663_REG_ONOFF_CFG1, data_buffer, 1);
- if (ret)
- return ret;
- // wait some time and then print error
- mdelay(5000);
-
- printf("Failed to power off!!!\n");
- return 1;
-}
-#endif /* CONFIG_GROUPER_MAX77663 */
-#endif /* CONFIG_CMD_POWEROFF */
+#include "pinmux-config-grouper.h"
/*
* Routine: pinmux_init
ARRAY_SIZE(grouper_padctrl));
}
-#ifdef CONFIG_MMC_SDHCI_TEGRA
-static void __maybe_unused tps65911_voltage_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, TPS65911_I2C_ADDRESS, 1, &dev);
- if (ret) {
- log_debug("cannot find PMIC I2C chip\n");
- return;
- }
-
- /* TPS659110: LDO1_REG = 3.3v, ACTIVE to SDMMC4 */
- ret = dm_i2c_reg_write(dev, TPS65911_REG_LDO1, 0xC9);
- if (ret)
- log_debug("vcore_emmc set failed: %d\n", ret);
-}
-
-static void __maybe_unused max77663_voltage_init(void)
-{
- struct udevice *dev;
- int ret;
-
- ret = i2c_get_chip_for_busnum(0, MAX77663_I2C_ADDRESS, 1, &dev);
- if (ret) {
- log_debug("cannot find PMIC I2C chip\n");
- return;
- }
-
- /* 0x60 for 1.8v, bit7:0 = voltage */
- ret = dm_i2c_reg_write(dev, MAX77663_REG_SD2, 0x60);
- if (ret)
- log_debug("vdd_1v8_vio set failed: %d\n", ret);
-
- /* 0xEC for 3.00v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
- ret = dm_i2c_reg_write(dev, MAX77663_REG_LDO3, 0xEC);
- if (ret)
- log_debug("vcore_emmc set failed: %d\n", ret);
-}
-
-/*
- * Routine: pin_mux_mmc
- * Description: setup the MMC muxes, power rails, etc.
- */
-void pin_mux_mmc(void)
-{
-#ifdef CONFIG_GROUPER_MAX77663
- /* Bring up eMMC power on MAX PMIC */
- max77663_voltage_init();
-#endif
-
-#ifdef CONFIG_GROUPER_TPS65911
- /* Bring up eMMC power on TI PMIC */
- tps65911_voltage_init();
-#endif
-}
-#endif /* MMC */
-
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
int ft_board_setup(void *blob, struct bd_info *bd)
{