mtd: nand: mxs_nand: use self init

Instead of completing initialization via scan_bbt callback use
NAND self init to initialize the GPMI (MXS) NAND controller.

Suggested-by: Scott Wood <oss@buserror.net>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>

diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 94fbf89e4b8cae01ae3e00c975f71bd3dfba614e..4db259fcb224160566a7dea65bf87c8116bc5a2a 100644 (file)
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -143,6 +143,7 @@ config NAND_MXC
 config NAND_MXS
        bool "MXS NAND support"
        depends on MX23 || MX28 || MX6 || MX7
+       select SYS_NAND_SELF_INIT
        imply CMD_NAND
        select APBH_DMA
        select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7

diff --git a/drivers/mtd/nand/mxs_nand.c b/drivers/mtd/nand/mxs_nand.c
index 5b7ad18c4277944df59aaeca376f16897ea1cd90..14d321001732924d44a5b3d25b370653013ffabe 100644 (file)
--- a/drivers/mtd/nand/mxs_nand.c
+++ b/drivers/mtd/nand/mxs_nand.c
@@ -17,6 +17,7 @@
 #include <linux/mtd/rawnand.h>
 #include <linux/types.h>
 #include <malloc.h>
+#include <nand.h>
 #include <linux/errno.h>
 #include <asm/io.h>
 #include <asm/arch/clock.h>
@@ -47,6 +48,7 @@
 #define        MXS_NAND_BCH_TIMEOUT                    10000
 
 struct mxs_nand_info {
+       struct nand_chip chip;
        int             cur_chip;
 
        uint32_t        cmd_queue_len;
@@ -972,20 +974,15 @@ static int mxs_nand_block_bad(struct mtd_info *mtd, loff_t ofs)
 }
 
 /*
- * Nominally, the purpose of this function is to look for or create the bad
- * block table. In fact, since the we call this function at the very end of
- * the initialization process started by nand_scan(), and we doesn't have a
- * more formal mechanism, we "hook" this function to continue init process.
- *
  * At this point, the physical NAND Flash chips have been identified and
  * counted, so we know the physical geometry. This enables us to make some
  * important configuration decisions.
  *
  * The return value of this function propagates directly back to this driver's
- * call to nand_scan(). Anything other than zero will cause this driver to
+ * board_nand_init(). Anything other than zero will cause this driver to
  * tear everything down and declare failure.
  */
-static int mxs_nand_scan_bbt(struct mtd_info *mtd)
+int mxs_nand_setup_ecc(struct mtd_info *mtd)
 {
        struct nand_chip *nand = mtd_to_nand(mtd);
        struct mxs_nand_info *nand_info = nand_get_controller_data(nand);
@@ -1047,8 +1044,7 @@ static int mxs_nand_scan_bbt(struct mtd_info *mtd)
                mtd->_block_markbad = mxs_nand_hook_block_markbad;
        }
 
-       /* We use the reference implementation for bad block management. */
-       return nand_default_bbt(mtd);
+       return 0;
 }
 
 /*
@@ -1177,7 +1173,6 @@ int mxs_nand_init_spl(struct nand_chip *nand)
        nand->cmd_ctrl          = mxs_nand_cmd_ctrl;
        nand->dev_ready         = mxs_nand_device_ready;
        nand->select_chip       = mxs_nand_select_chip;
-       nand->scan_bbt          = mxs_nand_scan_bbt;
 
        nand->read_byte         = mxs_nand_read_byte;
        nand->read_buf          = mxs_nand_read_buf;
@@ -1192,27 +1187,22 @@ int mxs_nand_init_spl(struct nand_chip *nand)
        return 0;
 }
 
-/*!
- * This function is called during the driver binding process.
- *
- * @param   pdev  the device structure used to store device specific
- *                information that is used by the suspend, resume and
- *                remove functions
- *
- * @return  The function always returns 0.
- */
-int board_nand_init(struct nand_chip *nand)
+void board_nand_init(void)
 {
+       struct mtd_info *mtd;
        struct mxs_nand_info *nand_info;
+       struct nand_chip *nand;
        int err;
 
        nand_info = malloc(sizeof(struct mxs_nand_info));
        if (!nand_info) {
                printf("MXS NAND: Failed to allocate private data\n");
-               return -ENOMEM;
+                       return;
        }
        memset(nand_info, 0, sizeof(struct mxs_nand_info));
 
+       nand = &nand_info->chip;
+       mtd = nand_to_mtd(nand);
        err = mxs_nand_alloc_buffers(nand_info);
        if (err)
                goto err1;
@@ -1231,13 +1221,19 @@ int board_nand_init(struct nand_chip *nand)
        nand->dev_ready         = mxs_nand_device_ready;
        nand->select_chip       = mxs_nand_select_chip;
        nand->block_bad         = mxs_nand_block_bad;
-       nand->scan_bbt          = mxs_nand_scan_bbt;
 
        nand->read_byte         = mxs_nand_read_byte;
 
        nand->read_buf          = mxs_nand_read_buf;
        nand->write_buf         = mxs_nand_write_buf;
 
+       /* first scan to find the device and get the page size */
+       if (nand_scan_ident(mtd, CONFIG_SYS_MAX_NAND_DEVICE, NULL))
+               goto err2;
+
+       if (mxs_nand_setup_ecc(mtd))
+               goto err2;
+
        nand->ecc.read_page     = mxs_nand_ecc_read_page;
        nand->ecc.write_page    = mxs_nand_ecc_write_page;
        nand->ecc.read_oob      = mxs_nand_ecc_read_oob;
@@ -1249,12 +1245,21 @@ int board_nand_init(struct nand_chip *nand)
        nand->ecc.size          = 512;
        nand->ecc.strength      = 8;
 
-       return 0;
+       /* second phase scan */
+       err = nand_scan_tail(mtd);
+       if (err)
+               goto err2;
+
+       err = nand_register(0, mtd);
+       if (err)
+               goto err2;
+
+       return;
 
 err2:
        free(nand_info->data_buf);
        free(nand_info->cmd_buf);
 err1:
        free(nand_info);
-       return err;
+       return;
 }

diff --git a/drivers/mtd/nand/mxs_nand.h b/drivers/mtd/nand/mxs_nand.h
index 9bb7148d98d04531e48b0811dfa7e4ec77a61da2..379ed24f05a3c06af9209c02bab0dde1f0100dc6 100644 (file)
--- a/drivers/mtd/nand/mxs_nand.h
+++ b/drivers/mtd/nand/mxs_nand.h
@@ -8,3 +8,4 @@
  */
 
 int mxs_nand_init_spl(struct nand_chip *nand);
+int mxs_nand_setup_ecc(struct mtd_info *mtd);