+++ /dev/null
-#!/bin/sh
-
-# 0) Generate keys
-#
-# WARNING: ECDSA keys are only supported by HAB 4.5 and newer (i.e. i.MX8M Plus)
-#
-# cd /path/to/cst-3.3.1/keys/
-# ./hab4_pki_tree.sh -existing-ca n -use-ecc n -kl 4096 -duration 10 -num-srk 4 -srk-ca y
-# cd /path/to/cst-3.3.1/crts/
-# ../linux64/bin/srktool -h 4 -t SRK_1_2_3_4_table.bin -e SRK_1_2_3_4_fuse.bin -d sha256 -c ./SRK1_sha256_4096_65537_v3_ca_crt.pem,./SRK2_sha256_4096_65537_v3_ca_crt.pem,./SRK3_sha256_4096_65537_v3_ca_crt.pem,./SRK4_sha256_4096_65537_v3_ca_crt.pem -f 1
-
-# 1) Build U-Boot (e.g. for i.MX8MM)
-#
-# cp -Lv /path/to/arm-trusted-firmware/build/imx8mm/release/bl31.bin .
-# cp -Lv /path/to/firmware-imx-8.14/firmware/ddr/synopsys/ddr3* .
-# make -j imx8mm_board_defconfig
-# make -j`nproc` flash.bin
-
-# 2) Sign SPL and DRAM blobs
-
-cp doc/imx/habv4/csf_examples/mx8m/csf_spl.txt csf_spl.tmp
-cp doc/imx/habv4/csf_examples/mx8m/csf_fit.txt csf_fit.tmp
-
-# update File Paths from env vars
-if ! [ -r $CSF_KEY ]; then
- echo "Error: \$CSF_KEY not found"
- exit 1
-fi
-if ! [ -r $IMG_KEY ]; then
- echo "Error: \$IMG_KEY not found"
- exit 1
-fi
-if ! [ -r $SRK_TABLE ]; then
- echo "Error: \$SRK_TABLE not found"
- exit 1
-fi
-sed -i "s:\$CSF_KEY:$CSF_KEY:" csf_spl.tmp
-sed -i "s:\$IMG_KEY:$IMG_KEY:" csf_spl.tmp
-sed -i "s:\$SRK_TABLE:$SRK_TABLE:" csf_spl.tmp
-sed -i "s:\$CSF_KEY:$CSF_KEY:" csf_fit.tmp
-sed -i "s:\$IMG_KEY:$IMG_KEY:" csf_fit.tmp
-sed -i "s:\$SRK_TABLE:$SRK_TABLE:" csf_fit.tmp
-
-# update SPL Blocks
-spl_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SPL_TEXT_BASE=/ s@.*=@@p" .config) - 0x40)) )
-spl_block_size=$(printf "0x%x" $(stat -tc %s u-boot-spl-ddr.bin))
-sed -i "/Blocks = / s@.*@ Blocks = $spl_block_base 0x0 $spl_block_size \"flash.bin\"@" csf_spl.tmp
-
-# Generate CSF blob
-cst -i csf_spl.tmp -o csf_spl.bin
-
-# Patch CSF blob into flash.bin
-spl_csf_offset=$(xxd -s 24 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@")
-spl_bin_offset=$(xxd -s 4 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@")
-spl_dd_offset=$((${spl_csf_offset} - ${spl_bin_offset} + 0x40))
-dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset} conv=notrunc
-
-# 3) Sign u-boot.itb
-
-# fitImage
-fit_block_base=$(printf "0x%x" $(sed -n "/CONFIG_SPL_LOAD_FIT_ADDRESS=/ s@.*=@@p" .config) )
-fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset))
-fit_block_size=$(printf "0x%x" $(( ( ( $(stat -tc %s u-boot.itb) + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20 )) )
-sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset $fit_block_size \"flash.bin\"@" csf_fit.tmp
-
-# IVT
-ivt_ptr_base=$(printf "%08x" ${fit_block_base} | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
-ivt_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} - 0x20 )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
-csf_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
-ivt_block_offset=$((${fit_block_offset} + ${fit_block_size} - 0x20))
-csf_block_offset=$((${ivt_block_offset} + 0x20))
-
-echo "0xd1002041 ${ivt_block_base} 0x00000000 0x00000000 0x00000000 ${ivt_block_base} ${csf_block_base} 0x00000000" | xxd -r -p > ivt.bin
-dd if=ivt.bin of=flash.bin bs=1 seek=${ivt_block_offset} conv=notrunc
-
-# Generate CSF blob
-cst -i csf_fit.tmp -o csf_fit.bin
-
-# When loading flash.bin via USB, we must ensure that the file being
-# served is as large as the target expects (see
-# board_spl_fit_size_align()), otherwise the target will hang in
-# rom_api_download_image() waiting for the remaining bytes.
-#
-# Note that in order for dd to actually extend the file, one must not
-# pass conv=notrunc here. With a non-zero seek= argument, dd is
-# documented to preserve the contents of the file seeked past; in
-# particular, dd does not open the file with O_TRUNC.
-CSF_SIZE=$(sed -n "/CONFIG_CSF_SIZE=/ s@.*=@@p" .config)
-dd if=/dev/null of=csf_fit.bin bs=1 seek=$((CSF_SIZE - 0x20)) count=0
-
-# Patch CSF blob into flash.bin
-dd if=csf_fit.bin of=flash.bin bs=1 seek=${csf_block_offset} conv=notrunc
- Defconfig:
CONFIG_IMX_HAB=y
+ CONFIG_FSL_CAAM=y
+ CONFIG_ARCH_MISC_INIT=y
+ CONFIG_SPL_CRYPTO=y
- Kconfig:
The CSF contains all the commands that the HAB executes during the secure
boot. These commands instruct the HAB code on which memory areas of the image
-to authenticate, which keys to install, use and etc.
-
-CSF examples are available under doc/imx/habv4/csf_examples/ directory.
-
-CSF "Blocks" line for csf_spl.txt can be generated as follows:
-
-```
-spl_block_base=$(printf "0x%x" $(( $(sed -n "/CONFIG_SPL_TEXT_BASE=/ s@.*=@@p" .config) - 0x40)) )
-spl_block_size=$(printf "0x%x" $(stat -tc %s u-boot-spl-ddr.bin))
-sed -i "/Blocks = / s@.*@ Blocks = $spl_block_base 0x0 $spl_block_size \"flash.bin\"@" csf_spl.txt
-```
-
-The resulting line looks as follows:
-```
- Blocks = 0x7e0fc0 0x0 0x306f0 "flash.bin"
-```
-
-The columns mean:
- - CONFIG_SPL_TEXT_BASE - 0x40 -- Start address of signed data, in DRAM
- - 0x0 -- Start address of signed data, in "flash.bin"
- - 0x306f0 -- Length of signed data, in "flash.bin"
- - Filename -- "flash.bin"
-
-To generate signature for the SPL part of flash.bin container, use CST:
-```
-cst -i csf_spl.tmp -o csf_spl.bin
-```
-
-The newly generated CST blob has to be patched into existing flash.bin
-container. Conveniently, flash.bin IVT contains physical address of the
-CSF blob. Remember, the SPL part of flash.bin container is loaded by the
-BootROM at CONFIG_SPL_TEXT_BASE - 0x40 , so the offset of CSF blob in
-the fitImage can be calculated and inserted into the flash.bin in the
-correct location as follows:
-```
-# offset = IVT_HEADER[6 = CSF address] - CONFIG_SPL_TEXT_BASE - 0x40
-spl_csf_offset=$(xxd -s 24 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@")
-spl_bin_offset=$(xxd -s 4 -l 4 -e flash.bin | cut -d " " -f 2 | sed "s@^@0x@")
-spl_dd_offset=$((${spl_csf_offset} - ${spl_bin_offset} + 0x40))
-dd if=csf_spl.bin of=flash.bin bs=1 seek=${spl_dd_offset} conv=notrunc
-```
-
-CSF "Blocks" line for csf_fit.txt can be generated as follows:
-```
-# fitImage
-fit_block_base=$(printf "0x%x" $(sed -n "/CONFIG_SPL_LOAD_FIT_ADDRESS=/ s@.*=@@p" .config) )
-fit_block_offset=$(printf "0x%s" $(fdtget -t x u-boot.dtb /binman/imx-boot/uboot offset))
-fit_block_size=$(printf "0x%x" $(( ( ( $(stat -tc %s u-boot.itb) + 0x1000 - 0x1 ) & ~(0x1000 - 0x1)) + 0x20 )) )
-sed -i "/Blocks = / s@.*@ Blocks = $fit_block_base $fit_block_offset $fit_block_size \"flash.bin\"@" csf_fit.tmp
-```
-
-The fitImage part of flash.bin requires separate IVT. Generate the IVT and
-patch it into the correct aligned location of flash.bin as follows:
-```
-# IVT
-ivt_ptr_base=$(printf "%08x" ${fit_block_base} | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
-ivt_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} - 0x20 )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
-csf_block_base=$(printf "%08x" $(( ${fit_block_base} + ${fit_block_size} )) | sed "s@\(..\)\(..\)\(..\)\(..\)@0x\4\3\2\1@")
-ivt_block_offset=$((${fit_block_offset} + ${fit_block_size} - 0x20))
-csf_block_offset=$((${ivt_block_offset} + 0x20))
-
-echo "0xd1002041 ${ivt_block_base} 0x00000000 0x00000000 0x00000000 ${ivt_block_base} ${csf_block_base} 0x00000000" | xxd -r -p > ivt.bin
-dd if=ivt.bin of=flash.bin bs=1 seek=${ivt_block_offset} conv=notrunc
-```
-
-To generate CSF signature for the fitImage part of flash.bin container, use CST:
-```
-cst -i csf_fit.tmp -o csf_fit.bin
-```
-
-Finally, patch the CSF signature into the fitImage right past the IVT:
-```
-dd if=csf_fit.bin of=flash.bin bs=1 seek=${csf_block_offset} conv=notrunc
-```
-
-The entire script is available in doc/imx/habv4/csf_examples/mx8m/csf.sh
-and can be used as follows to modify flash.bin to be signed
-(adjust paths as needed):
+to authenticate, which keys to install, use and etc. The CSF is generated
+using the CST Code Signing Tool based on input configuration file. This tool
+input configuration file is generated using binman, and the tool is invoked
+from binman as well.
+
+The SPL and fitImage sections of the generated image are signed separately.
+The signing is activated by wrapping SPL and fitImage sections into nxp-imx8mcst
+etype, which is done automatically in arch/arm/dts/imx8m{m,n,p,q}-u-boot.dtsi
+in case CONFIG_IMX_HAB Kconfig symbol is enabled.
+
+Build of flash.bin target then produces a signed flash.bin automatically.
+
+The nxp-imx8mcst etype is configurable using either DT properties or environment
+variables. The following DT properties and environment variables are supported.
+Note that environment variables override DT properties.
+
++--------------------+-----------+------------------------------------------------------------------+
+| DT property | Variable | Description |
++====================+===========+==================================================================+
+| nxp,loader-address | | SPL base address |
++--------------------+-----------+------------------------------------------------------------------+
+| nxp,srk-table | SRK_TABLE | full path to SRK_1_2_3_4_table.bin |
++--------------------+-----------+------------------------------------------------------------------+
+| nxp,csf-crt | CSF_KEY | full path to the CSF Key CSF1_1_sha256_4096_65537_v3_usr_crt.pem |
++--------------------+-----------+------------------------------------------------------------------+
+| nxp,img-crt | IMG_KEY | full path to the IMG Key IMG1_1_sha256_4096_65537_v3_usr_crt.pem |
++--------------------+-----------+------------------------------------------------------------------+
+
+Environment variables can be set as follows to point the build process
+to external key material:
```
export CST_DIR=/usr/src/cst-3.3.1/
export CSF_KEY=$CST_DIR/crts/CSF1_1_sha256_4096_65537_v3_usr_crt.pem
export IMG_KEY=$CST_DIR/crts/IMG1_1_sha256_4096_65537_v3_usr_crt.pem
export SRK_TABLE=$CST_DIR/crts/SRK_1_2_3_4_table.bin
-export PATH=$CST_DIR/linux64/bin:$PATH
-/bin/sh doc/imx/habv4/csf_examples/mx8m/csf.sh
+make flash.bin
```
1.4 Closing the device
projects / u-boot.git / commitdiff