-// SPDX-License-Identifier: GPL-2.0+ OR X11
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
- * NXP ls1088a SOC common device tree source
+ * Device Tree Include file for NXP Layerscape-1088A family SoC.
+ *
+ * Copyright 2017-2020 NXP
+ *
+ * Harninder Rai <harninder.rai@nxp.com>
*
- * Copyright 2017, 2020-2021, 2023 NXP
*/
-
#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
+
/ {
compatible = "fsl,ls1088a";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
+ aliases {
+ crypto = &crypto;
+ rtc1 = &ftm_alarm0;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
};
};
+ thermal-zones {
+ core-cluster {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 0>;
+
+ trips {
+ core_cluster_alert: core-cluster-alert {
+ temperature = <85000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ core-cluster-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&core_cluster_alert>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+ <&cpu7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+
+ soc {
+ polling-delay-passive = <1000>;
+ polling-delay = <5000>;
+ thermal-sensors = <&tmu 1>;
+
+ trips {
+ soc-crit {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
- interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
- <1 14 0x8>, /* Physical Non-Secure PPI, active-low */
- <1 11 0x8>, /* Virtual PPI, active-low */
- <1 10 0x8>; /* Hypervisor PPI, active-low */
+ interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */
+ <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */
+ <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */
+ <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */
+ };
+
+ pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
};
sysclk: sysclk {
clock-output-names = "sysclk";
};
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&reset>;
+ offset = <0x0>;
+ mask = <0x02>;
+ };
+
soc {
compatible = "simple-bus";
#address-cells = <2>;
clocks = <&sysclk>;
};
- duart0: serial@21c0500 {
- compatible = "fsl,ns16550", "ns16550a";
- reg = <0x0 0x21c0500 0x0 0x100>;
+ dcfg: dcfg@1e00000 {
+ compatible = "fsl,ls1088a-dcfg", "syscon";
+ reg = <0x0 0x1e00000 0x0 0x10000>;
+ little-endian;
+ };
+
+ reset: syscon@1e60000 {
+ compatible = "fsl,ls1088a-reset", "syscon";
+ reg = <0x0 0x1e60000 0x0 0x10000>;
+ };
+
+ isc: syscon@1f70000 {
+ compatible = "fsl,ls1088a-isc", "syscon";
+ reg = <0x0 0x1f70000 0x0 0x10000>;
+ little-endian;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1f70000 0x10000>;
+
+ extirq: interrupt-controller@14 {
+ compatible = "fsl,ls1088a-extirq";
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x14 4>;
+ interrupt-map =
+ <0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+ <1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+ <2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+ <3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+ <4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
+ <8 0 &gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <9 0 &gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
+ <10 0 &gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <11 0 &gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0xf 0x0>;
+ };
+ };
+
+ sfp: efuse@1e80000 {
+ compatible = "fsl,ls1028a-sfp";
+ reg = <0x0 0x1e80000 0x0 0x10000>;
clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
QORIQ_CLK_PLL_DIV(4)>;
- interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
+ clock-names = "sfp";
+ };
+
+ tmu: tmu@1f80000 {
+ compatible = "fsl,qoriq-tmu";
+ reg = <0x0 0x1f80000 0x0 0x10000>;
+ interrupts = <0 23 0x4>;
+ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>;
+ fsl,tmu-calibration =
+ /* Calibration data group 1 */
+ <0x00000000 0x00000023
+ 0x00000001 0x0000002a
+ 0x00000002 0x00000030
+ 0x00000003 0x00000037
+ 0x00000004 0x0000003d
+ 0x00000005 0x00000044
+ 0x00000006 0x0000004a
+ 0x00000007 0x00000051
+ 0x00000008 0x00000057
+ 0x00000009 0x0000005e
+ 0x0000000a 0x00000064
+ 0x0000000b 0x0000006b
+ /* Calibration data group 2 */
+ 0x00010000 0x00000022
+ 0x00010001 0x0000002a
+ 0x00010002 0x00000032
+ 0x00010003 0x0000003a
+ 0x00010004 0x00000042
+ 0x00010005 0x0000004a
+ 0x00010006 0x00000052
+ 0x00010007 0x0000005a
+ 0x00010008 0x00000062
+ 0x00010009 0x0000006a
+ /* Calibration data group 3 */
+ 0x00020000 0x00000021
+ 0x00020001 0x0000002b
+ 0x00020002 0x00000035
+ 0x00020003 0x00000040
+ 0x00020004 0x0000004a
+ 0x00020005 0x00000054
+ 0x00020006 0x0000005e
+ /* Calibration data group 4 */
+ 0x00030000 0x00000010
+ 0x00030001 0x0000001c
+ 0x00030002 0x00000027
+ 0x00030003 0x00000032
+ 0x00030004 0x0000003e
+ 0x00030005 0x00000049
+ 0x00030006 0x00000054
+ 0x00030007 0x00000060>;
+ little-endian;
+ #thermal-sensor-cells = <1>;
};
dspi: spi@2100000 {
status = "disabled";
};
+ duart0: serial@21c0500 {
+ compatible = "fsl,ns16550", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
<GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
};
+ console@8340020 {
+ compatible = "fsl,dpaa2-console";
+ reg = <0x00000000 0x08340020 0 0x2>;
+ };
+
+ ptp-timer@8b95000 {
+ compatible = "fsl,dpaa2-ptp";
+ reg = <0x0 0x8b95000 0x0 0x100>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
+ little-endian;
+ fsl,extts-fifo;
+ };
+
emdio1: mdio@8b96000 {
compatible = "fsl,fman-memac-mdio";
reg = <0x0 0x8b96000 0x0 0x1000>;
};
};
+ cluster1_core0_watchdog: wdt@c000000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc000000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster1_core1_watchdog: wdt@c010000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc010000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster1_core2_watchdog: wdt@c020000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc020000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster1_core3_watchdog: wdt@c030000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc030000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster2_core0_watchdog: wdt@c100000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc100000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster2_core1_watchdog: wdt@c110000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc110000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster2_core2_watchdog: wdt@c120000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc120000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
+ cluster2_core3_watchdog: wdt@c130000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0 0xc130000 0x0 0x1000>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
+ clock-names = "wdog_clk", "apb_pclk";
+ };
+
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
};
};
};
+
+ rcpm: power-controller@1e34040 {
+ compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
+ reg = <0x0 0x1e34040 0x0 0x18>;
+ #fsl,rcpm-wakeup-cells = <6>;
+ little-endian;
+ };
+
+ ftm_alarm0: timer@2800000 {
+ compatible = "fsl,ls1088a-ftm-alarm";
+ reg = <0x0 0x2800000 0x0 0x10000>;
+ fsl,rcpm-wakeup = <&rcpm 0x0 0x0 0x0 0x0 0x4000 0x0>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ };
};
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
};
};
projects / u-boot.git / commitdiff