microblaze: fix style in board.c

Make microblaze's board.c checkpatch clean.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>
Reviewed-by: Michal Simek <monstr@monstr.eu>

diff --git a/arch/microblaze/lib/board.c b/arch/microblaze/lib/board.c
index 815fb5a0c95216d729178897316c6e44d6c2dff6..3a6d81aa0909e33e2cc82fb9d4dda0ba87bf46df 100644 (file)
--- a/arch/microblaze/lib/board.c
+++ b/arch/microblaze/lib/board.c
@@ -74,15 +74,15 @@ void board_init_f(ulong not_used)
 {
        bd_t *bd;
        init_fnc_t **init_fnc_ptr;
-       gd = (gd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
-       bd = (bd_t *) (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET \
+       gd = (gd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET);
+       bd = (bd_t *)(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET
                                                - GENERATED_BD_INFO_SIZE);
 #if defined(CONFIG_CMD_FLASH)
        ulong flash_size = 0;
 #endif
        asm ("nop");    /* FIXME gd is not initialize - wait */
-       memset ((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
-       memset ((void *)bd, 0, GENERATED_BD_INFO_SIZE);
+       memset((void *)gd, 0, GENERATED_GBL_DATA_SIZE);
+       memset((void *)bd, 0, GENERATED_BD_INFO_SIZE);
        gd->bd = bd;
        gd->baudrate = CONFIG_BAUDRATE;
        bd->bi_baudrate = CONFIG_BAUDRATE;
@@ -108,57 +108,55 @@ void board_init_f(ulong not_used)
         * aka CONFIG_SYS_MONITOR_BASE - Note there is no need for reloc_off
         * as our monitory code is run from SDRAM
         */
-       mem_malloc_init (CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
+       mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
 
        serial_initialize();
 
        for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
-               WATCHDOG_RESET ();
-               if ((*init_fnc_ptr) () != 0) {
-                       hang ();
-               }
+               WATCHDOG_RESET();
+               if ((*init_fnc_ptr) () != 0)
+                       hang();
        }
 
 #ifdef CONFIG_OF_CONTROL
        /* For now, put this check after the console is ready */
-       if (fdtdec_prepare_fdt()) {
-               panic("** CONFIG_OF_CONTROL defined but no FDT - please see "
-                       "doc/README.fdt-control");
-       } else
+       if (fdtdec_prepare_fdt())
+               panic("** No FDT - please see doc/README.fdt-control");
+       else
                printf("DTB: 0x%x\n", (u32)gd->fdt_blob);
 #endif
 
-       puts ("SDRAM :\n");
-       printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
-       printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
-       printf ("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
+       puts("SDRAM :\n");
+       printf("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
+       printf("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
+       printf("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
 
 #if defined(CONFIG_CMD_FLASH)
-       puts ("Flash: ");
+       puts("Flash: ");
        bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
        flash_size = flash_init();
        if (bd->bi_flashstart && flash_size > 0) {
 # ifdef CONFIG_SYS_FLASH_CHECKSUM
-               print_size (flash_size, "");
+               print_size(flash_size, "");
                /*
                 * Compute and print flash CRC if flashchecksum is set to 'y'
                 *
                 * NOTE: Maybe we should add some WATCHDOG_RESET()? XXX
                 */
                if (getenv_yesno("flashchecksum") == 1) {
-                       printf ("  CRC: %08X",
-                               crc32(0, (const u8 *)bd->bi_flashstart,
-                                                       flash_size)
+                       printf("  CRC: %08X",
+                              crc32(0, (const u8 *)bd->bi_flashstart,
+                                    flash_size)
                        );
                }
-               putc ('\n');
+               putc('\n');
 # else /* !CONFIG_SYS_FLASH_CHECKSUM */
-               print_size (flash_size, "\n");
+               print_size(flash_size, "\n");
 # endif /* CONFIG_SYS_FLASH_CHECKSUM */
                bd->bi_flashsize = flash_size;
                bd->bi_flashoffset = bd->bi_flashstart + flash_size;
        } else {
-               puts ("Flash init FAILED");
+               puts("Flash init FAILED");
                bd->bi_flashstart = 0;
                bd->bi_flashsize = 0;
                bd->bi_flashoffset = 0;
@@ -166,10 +164,10 @@ void board_init_f(ulong not_used)
 #endif
 
        /* relocate environment function pointers etc. */
-       env_relocate ();
+       env_relocate();
 
        /* Initialize stdio devices */
-       stdio_init ();
+       stdio_init();
 
        /* Initialize the jump table for applications */
        jumptable_init();
@@ -193,13 +191,14 @@ void board_init_f(ulong not_used)
 
        /* main_loop */
        for (;;) {
-               WATCHDOG_RESET ();
-               main_loop ();
+               WATCHDOG_RESET();
+               main_loop();
        }
 }
 
-void hang (void)
+void hang(void)
 {
-       puts ("### ERROR ### Please RESET the board ###\n");
-       for (;;) ;
+       puts("### ERROR ### Please RESET the board ###\n");
+       for (;;)
+               ;
 }