]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
mmc: fsl_esdhc_imx: drop useless code
authorYangbo Lu <yangbo.lu@nxp.com>
Fri, 21 Jun 2019 03:42:30 +0000 (11:42 +0800)
committerPeng Fan <peng.fan@nxp.com>
Sun, 23 Jun 2019 06:18:48 +0000 (14:18 +0800)
Dropped useless code for i.MX eSDHC driver.

Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Tested-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
drivers/mmc/fsl_esdhc_imx.c
include/fsl_esdhc_imx.h

index 797bdbb97facd7f400c950b49d0d9ed55ca97f25..c0d47ba3784ff5a228d161a1d0a2ac56bf430f4f 100644 (file)
@@ -265,8 +265,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 {
        int timeout;
        struct fsl_esdhc *regs = priv->esdhc_regs;
-#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
+#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
        dma_addr_t addr;
 #endif
        uint wml_value;
@@ -279,8 +278,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 
                esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
+#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
                addr = virt_to_phys((void *)(data->dest));
                if (upper_32_bits(addr))
                        printf("Error found for upper 32 bits\n");
@@ -316,8 +314,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
                esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
                                        wml_value << 16);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
+#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
                addr = virt_to_phys((void *)(data->src));
                if (upper_32_bits(addr))
                        printf("Error found for upper 32 bits\n");
@@ -382,8 +379,7 @@ static void check_and_invalidate_dcache_range
        unsigned end = 0;
        unsigned size = roundup(ARCH_DMA_MINALIGN,
                                data->blocks*data->blocksize);
-#if defined(CONFIG_FSL_LAYERSCAPE) || defined(CONFIG_S32V234) || \
-       defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
+#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M)
        dma_addr_t addr;
 
        addr = virt_to_phys((void *)(data->dest));
@@ -1368,45 +1364,6 @@ int fsl_esdhc_mmc_init(bd_t *bis)
 }
 #endif
 
-#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
-void mmc_adapter_card_type_ident(void)
-{
-       u8 card_id;
-       u8 value;
-
-       card_id = QIXIS_READ(present) & QIXIS_SDID_MASK;
-       gd->arch.sdhc_adapter = card_id;
-
-       switch (card_id) {
-       case QIXIS_ESDHC_ADAPTER_TYPE_EMMC45:
-               value = QIXIS_READ(brdcfg[5]);
-               value |= (QIXIS_DAT4 | QIXIS_DAT5_6_7);
-               QIXIS_WRITE(brdcfg[5], value);
-               break;
-       case QIXIS_ESDHC_ADAPTER_TYPE_SDMMC_LEGACY:
-               value = QIXIS_READ(pwr_ctl[1]);
-               value |= QIXIS_EVDD_BY_SDHC_VS;
-               QIXIS_WRITE(pwr_ctl[1], value);
-               break;
-       case QIXIS_ESDHC_ADAPTER_TYPE_EMMC44:
-               value = QIXIS_READ(brdcfg[5]);
-               value |= (QIXIS_SDCLKIN | QIXIS_SDCLKOUT);
-               QIXIS_WRITE(brdcfg[5], value);
-               break;
-       case QIXIS_ESDHC_ADAPTER_TYPE_RSV:
-               break;
-       case QIXIS_ESDHC_ADAPTER_TYPE_MMC:
-               break;
-       case QIXIS_ESDHC_ADAPTER_TYPE_SD:
-               break;
-       case QIXIS_ESDHC_NO_ADAPTER:
-               break;
-       default:
-               break;
-       }
-}
-#endif
-
 #ifdef CONFIG_OF_LIBFDT
 __weak int esdhc_status_fixup(void *blob, const char *compat)
 {
@@ -1434,17 +1391,11 @@ void fdt_fixup_esdhc(void *blob, bd_t *bd)
        do_fixup_by_compat_u32(blob, compat, "clock-frequency",
                               gd->arch.sdhc_clk, 1);
 #endif
-#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
-       do_fixup_by_compat_u32(blob, compat, "adapter-type",
-                              (u32)(gd->arch.sdhc_adapter), 1);
-#endif
 }
 #endif
 
 #if CONFIG_IS_ENABLED(DM_MMC)
-#ifndef CONFIG_PPC
 #include <asm/arch/clock.h>
-#endif
 __weak void init_clk_usdhc(u32 index)
 {
 }
@@ -1472,11 +1423,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
        addr = dev_read_addr(dev);
        if (addr == FDT_ADDR_T_NONE)
                return -EINVAL;
-#ifdef CONFIG_PPC
-       priv->esdhc_regs = (struct fsl_esdhc *)lower_32_bits(addr);
-#else
        priv->esdhc_regs = (struct fsl_esdhc *)addr;
-#endif
        priv->dev = dev;
        priv->mode = -1;
        if (data) {
@@ -1583,11 +1530,7 @@ static int fsl_esdhc_probe(struct udevice *dev)
 
                priv->sdhc_clk = clk_get_rate(&priv->per_clk);
        } else {
-#ifndef CONFIG_PPC
                priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq);
-#else
-               priv->sdhc_clk = gd->arch.sdhc_clk;
-#endif
                if (priv->sdhc_clk <= 0) {
                        dev_err(dev, "Unable to get clk for %s\n", dev->name);
                        return -EINVAL;
index 67fd28926e3bd4de0b6ac7a38d8ee453fff58ab0..33c6d52bfe950ec3fe2739288690baa31beb0bf2 100644 (file)
 /* needed for the mmc_cfg definition */
 #include <mmc.h>
 
-#ifdef CONFIG_FSL_ESDHC_ADAPTER_IDENT
-#include "../board/freescale/common/qixis.h"
-#endif
-
 /* FSL eSDHC-specific constants */
 #define SYSCTL                 0x0002e02c
 #define SYSCTL_INITA           0x08000000