omap4_common: config: remove I2C for SPL mode

Commit 6789e84ecaa8f45d053084e08c381284a04abff7 (i2c, omap24xx:
convert driver to new mutlibus/mutliadapter framework) intended to
make I2C driver compatible with latest changes. It unfortunately has
had a impact on size on SPL as well. For example on SDP4430,
32032 bytes before/MLO
35416 bytes after/MLO

With this mentioned commit, MLO stops booting on SDP4430 as only 32K
is accessible for non-secure (bootloader) s/w on GP devices and the size
increase to 56K fails boot.

On the latest u-boot commit e7be18225fbea76d1f0034b224f0d1e60f07cfcf,
MLO is now at size 35592 bytes, However, I2C is not necessary for SPL
to function as we use SR_I2C for controlling the PMIC.
Disabling I2C reduces MLO to 32224 bytes which allows
OMAP4 GP platform to boot up.

Since this is common for all OMAP4 platforms, remove the need for I2C
for SPL builds in the common config.

Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sricharan R <r.sricharan@ti.com>

diff --git a/include/configs/ti_omap4_common.h b/include/configs/ti_omap4_common.h
index 2f0e4c0f67d5a7de491996f4871c7e9d51a21d97..bcb5eabd75660c4388b094258fbe2d6964b93db3 100644 (file)
--- a/include/configs/ti_omap4_common.h
+++ b/include/configs/ti_omap4_common.h
@@ -163,4 +163,10 @@
 #define CONFIG_SPL_NAND_AM33XX_BCH     /* ELM support */
 #endif
 
+#ifdef CONFIG_SPL_BUILD
+/* No need for i2c in SPL mode as we will use SRI2C for PMIC access on OMAP4 */
+#undef CONFIG_SYS_I2C
+#undef CONFIG_SYS_I2C_OMAP24XX
+#endif
+
 #endif /* __CONFIG_TI_OMAP4_COMMON_H */