ARM: k2g: Use board detection to wrap K2G GP specific calls

Certain peripherals used by K2G GP aren't used on K2G ICE evm. Or
configuration is slightly different. Therefore, use board detection to
deal with these variations.

Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

diff --git a/board/ti/ks2_evm/board_k2g.c b/board/ti/ks2_evm/board_k2g.c
index 362231286bdfa24d756cf19f0349df32a9384577..9001255f829dbecd287e5bd232bd3845b54a7df7 100644 (file)
--- a/board/ti/ks2_evm/board_k2g.c
+++ b/board/ti/ks2_evm/board_k2g.c
@@ -208,7 +208,9 @@ int board_mmc_init(bd_t *bis)
                return -1;
        }
 
-       omap_mmc_init(0, 0, 0, -1, -1);
+       if (board_is_k2g_gp())
+               omap_mmc_init(0, 0, 0, -1, -1);
+
        omap_mmc_init(1, 0, 0, -1, -1);
        return 0;
 }
@@ -278,11 +280,13 @@ int embedded_dtb_select(void)
 
        k2g_reset_mux_config();
 
-       /* deassert FLASH_HOLD */
-       clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
-                    BIT(9));
-       setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
-                    BIT(9));
+       if (board_is_k2g_gp()) {
+               /* deassert FLASH_HOLD */
+               clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET,
+                            BIT(9));
+               setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET,
+                            BIT(9));
+       }
 
        return 0;
 }