README: fix documentation of CONFIG_SHOW_BOOT_PROGRESS

Some previous changes added code right in the middle of the
description of CONFIG_SHOW_BOOT_PROGRESS.  Move this text down.
Fix formatting while we are at it.

Signed-off-by: Wolfgang Denk <wd@denx.de>

diff --git a/README b/README
index 08685316ebc4385501c115964ccaa01ed8c4179d..e0a4d53ed9250f03e34f52b9360140c76bc85c73 100644 (file)
--- a/README
+++ b/README
@@ -620,18 +620,18 @@ The following options need to be configured:
                the SMC.
 
 - Pre-Console Buffer:
-                Prior to the console being initialised (i.e. serial UART
-                initialised etc) all console output is silently discarded.
-                Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
-                buffer any console messages prior to the console being
-                initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
-                bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
-                a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
-                bytes are output before the console is  initialised, the
-                earlier bytes are discarded.
-
-                'Sane' compilers will generate smaller code if
-                CONFIG_PRE_CON_BUF_SZ is a power of 2
+               Prior to the console being initialised (i.e. serial UART
+               initialised etc) all console output is silently discarded.
+               Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
+               buffer any console messages prior to the console being
+               initialised to a buffer of size CONFIG_PRE_CON_BUF_SZ
+               bytes located at CONFIG_PRE_CON_BUF_ADDR. The buffer is
+               a circular buffer, so if more than CONFIG_PRE_CON_BUF_SZ
+               bytes are output before the console is  initialised, the
+               earlier bytes are discarded.
+
+               'Sane' compilers will generate smaller code if
+               CONFIG_PRE_CON_BUF_SZ is a power of 2
 
 - Boot Delay:  CONFIG_BOOTDELAY - in seconds
                Delay before automatically booting the default image;
@@ -2108,28 +2108,6 @@ The following options need to be configured:
                example, some LED's) on your board. At the moment,
                the following checkpoints are implemented:
 
-- Standalone program support:
-               CONFIG_STANDALONE_LOAD_ADDR
-
-               This option allows to define board specific values
-               for the address where standalone program gets loaded,
-               thus overwriting the architecutre dependent default
-               settings.
-
-- Frame Buffer Address:
-       CONFIG_FB_ADDR
-
-       Define CONFIG_FB_ADDR if you want to use specific address for
-       frame buffer.
-       Then system will reserve the frame buffer address to defined address
-       instead of lcd_setmem (this function grab the memory for frame buffer
-       by panel's size).
-
-       Please see board_init_f function.
-
-       If you want this config option then,
-       please define it at your board config file
-
 Legacy uImage format:
 
   Arg  Where                   When
@@ -2283,6 +2261,28 @@ FIT uImage format:
  -150  common/cmd_nand.c       Incorrect FIT image format
   151  common/cmd_nand.c       FIT image format OK
 
+- Standalone program support:
+               CONFIG_STANDALONE_LOAD_ADDR
+
+               This option allows to define board specific values
+               for the address where standalone program gets loaded,
+               thus overwriting the architecutre dependent default
+               settings.
+
+- Frame Buffer Address:
+               CONFIG_FB_ADDR
+
+               Define CONFIG_FB_ADDR if you want to use specific
+               address for frame buffer.
+               Then system will reserve the frame buffer address to
+               defined address instead of lcd_setmem (this function
+               grab the memory for frame buffer by panel's size).
+
+               Please see board_init_f function.
+
+               If you want this config option then,
+               please define it at your board config file
+
 - Automatic software updates via TFTP server
                CONFIG_UPDATE_TFTP
                CONFIG_UPDATE_TFTP_CNT_MAX
@@ -2899,8 +2899,8 @@ Low Level (hardware related) configuration options:
                        * 1ull) << 32 | CONFIG_SYS_CCSRBAR_PHYS_LOW)
 
 - CONFIG_SYS_CCSRBAR_PHYS_HIGH:
-               Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS.  This value is typically
-               either 0 (32-bit build) or 0xF (36-bit build).  This macro is
+               Bits 33-36 of CONFIG_SYS_CCSRBAR_PHYS.  This value is typically
+               either 0 (32-bit build) or 0xF (36-bit build).  This macro is
                used in assembly code, so it must not contain typecasts or
                integer size suffixes (e.g. "ULL").