+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2022 Fuzhou Rockchip Electronics Co., Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "OPEN AI LAB EAIDK-610";
- compatible = "openailab,eaidk-610", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 25000 0>;
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <200>;
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- dc_12v: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- key-power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&work_led_pin>, <&user_led_pin>,
- <&heartbeat_led_pin>, <&wlan_active_led_pin>,
- <&bt_active_led_pin>;
-
- work_led: led-0 {
- label = "blue:work";
- default-state = "on";
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- };
-
- user_led: led-1 {
- label = "read:user";
- default-state = "off";
- gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
- };
-
- heartbeat_led: led-2 {
- label = "green:heartbeat";
- linux,default-trigger = "heartbeat";
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- };
-
- wlan_active_led: led-3 {
- label = "yellow:wlan";
- gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- bt_active_led: led-4 {
- label = "blue:bt";
- gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "hci0-power";
- default-state = "off";
- };
- };
-
- rt5651-sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "realtek,rt5651-codec";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Headphone", "Headphone Jack";
- simple-audio-card,routing =
- "Mic Jack", "MICBIAS1",
- "IN1P", "Mic Jack",
- "Headphone Jack", "HPOL",
- "Headphone Jack", "HPOR";
- simple-audio-card,cpu {
- sound-dai = <&i2s1>;
- };
- simple-audio-card,codec {
- sound-dai = <&rt5651>;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
- /* For USB3.0 Port1/2 */
- vcc5v0_host1: vcc5v0-host1-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host1_en>;
- regulator-name = "vcc5v0_host1";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- /* For USB2.0 Port1/2 */
- vcc5v0_host3: vcc5v0-host3-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host3_en>;
- regulator-name = "vcc5v0_host3";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_typec: vcc5v0-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PC5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec_en>;
- regulator-name = "vcc5v0_typec";
- regulator-always-on;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vdd_log: vdd-log {
- compatible = "regulator-fixed";
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_3v0>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc2v8_dvp: LDO_REG2 {
- regulator-name = "vcc2v8_dvp";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmu: LDO_REG3 {
- regulator-name = "vcc1v8_pmu";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_b";
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_pin>;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_pin>;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-
- rt5651: audio-codec@1a {
- compatible = "rockchip,rt5651";
- reg = <0x1a>;
- clocks = <&cru SCLK_I2S_8CH_OUT>;
- clock-names = "mclk";
- hp-det-gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_LOW>;
- spk-con-gpio = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
- #sound-dai-cells = <0>;
- };
-
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb0: typec-portc@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vcc5v0_typec>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- usbc0_role_sw: endpoint@0 {
- remote-endpoint = <&dwc3_0_role_switch>;
- };
- };
- };
-
- connector {
- compatible = "usb-c-connector";
- data-role = "dual";
- label = "USB-C";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- usbc_hs: endpoint {
- remote-endpoint = <&u2phy0_typec_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- usbc_ss: endpoint {
- remote-endpoint = <&tcphy0_typec_ss>;
- };
- };
- };
- };
- };
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- audio-supply = <&vcca1v8_codec>;
- bt656-supply = <&vcc_3v0>;
- gpio1830-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
-};
-
-&pmu_io_domains {
- status = "okay";
-
- pmu1830-supply = <&vcc_3v0>;
-};
-
-&pinctrl {
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- bt {
- bt_enable_h: bt-enable-h {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- fusb302x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- lcd-panel {
- lcd_panel_reset: lcd-panel-reset {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- work_led_pin: work-led-pin {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led_pin: user-led-pin {
- rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- heartbeat_led_pin: heartbeat-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wlan_active_led_pin: wlan-led-pin {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_active_led_pin: bt-led-pin {
- rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
-
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- rt5651 {
- rt5651_hpcon: rt5640-hpcon {
- rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb-typec {
- vcc5v0_typec_en: vcc5v0_typec_en {
- rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host3_en: vcc5v0-host3-en {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- vcc5v0_host1_en: vcc5v0-host1-en {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdio0 {
- /* WiFi & BT combo module AMPAK AP6255 */
- #address-cells = <1>;
- #size-cells = <0>;
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy0_usb3 {
- orientation-switch;
- port {
- tcphy0_typec_ss: endpoint {
- remote-endpoint = <&usbc_ss>;
- };
- };
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host3>;
- status = "okay";
- };
-
- port {
- u2phy0_typec_hs: endpoint {
- remote-endpoint = <&usbc_hs>;
- };
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host3>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4345c5";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- max-speed = <1500000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- usb-role-switch;
-
- port {
- #address-cells = <1>;
- #size-cells = <0>;
- dwc3_0_role_switch: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&usbc0_role_sw>;
- };
- };
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/dts-v1/;
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-
-/ {
- model = "Rockchip RK3399 Evaluation Board";
- compatible = "rockchip,rk3399-evb", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdhci;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <200>;
- pwms = <&pwm0 0 25000 0>;
- };
-
- edp_panel: edp-panel {
- compatible = "lg,lp079qx1-sp0v";
- backlight = <&backlight>;
- enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- power-supply = <&vcc3v3_s0>;
-
- port {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- vdd_center: vdd-center {
- compatible = "pwm-regulator";
- pwms = <&pwm3 0 25000 0>;
- regulator-name = "vdd_center";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- status = "okay";
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc_phy: vcc-phy-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_phy";
- regulator-always-on;
- regulator-boot-on;
- };
-
-};
-
-&edp {
- status = "okay";
- force-hpd;
-
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_phy>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
-
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc1v8_pmu>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v0_tp: LDO_REG2 {
- regulator-name = "vcc3v0_tp";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmu: LDO_REG3 {
- regulator-name = "vcc1v8_pmu";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&pcie_phy {
- status = "disabled";
-};
-
-&pcie0 {
- ep-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- status = "disabled";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&pinctrl {
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins =
- <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
- *
- * Schematics available at https://dl.vamrs.com/products/ficus/docs/hw
- */
-
-/dts-v1/;
-#include "rk3399-rock960.dtsi"
-
-/ {
- model = "96boards RK3399 Ficus";
- compatible = "vamrs,ficus", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
- <&user_led3_pin>, <&user_led4_pin>,
- <&wlan_led_pin>, <&bt_led_pin>;
-
- user_led1: led-1 {
- label = "red:user1";
- gpios = <&gpio4 25 0>;
- linux,default-trigger = "heartbeat";
- };
-
- user_led2: led-2 {
- label = "red:user2";
- gpios = <&gpio4 26 0>;
- linux,default-trigger = "mmc0";
- };
-
- user_led3: led-3 {
- label = "red:user3";
- gpios = <&gpio4 30 0>;
- linux,default-trigger = "mmc1";
- };
-
- user_led4: led-4 {
- label = "red:user4";
- gpios = <&gpio1 0 0>;
- panic-indicator;
- linux,default-trigger = "none";
- };
-
- wlan_active_led: led-5 {
- label = "red:wlan";
- gpios = <&gpio1 1 0>;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- bt_active_led: led-6 {
- label = "red:bt";
- gpios = <&gpio1 4 0>;
- linux,default-trigger = "hci0-power";
- default-state = "off";
- };
- };
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc3v3_sys>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
-};
-
-&pinctrl {
- gmac {
- rgmii_sleep_pins: rgmii-sleep-pins {
- rockchip,pins =
- <3 RK_PB7 RK_FUNC_GPIO &pcfg_output_low>;
- };
- };
-
- pcie {
- pcie_drv: pcie-drv {
- rockchip,pins =
- <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb2 {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins =
- <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- leds {
- user_led1_pin: user-led1-pin {
- rockchip,pins =
- <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led2_pin: user-led2-pin {
- rockchip,pins =
- <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led3_pin: user-led3-pin {
- rockchip,pins =
- <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led4_pin: user-led4-pin {
- rockchip,pins =
- <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wlan_led_pin: wlan-led-pin {
- rockchip,pins =
- <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_led_pin: bt-led-pin {
- rockchip,pins =
- <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&spi1 {
- /* On both Low speed and High speed expansion */
- cs-gpios = <0>, <&gpio4 RK_PA6 0>, <&gpio4 RK_PA7 0>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
- dr_mode = "host";
-};
-
-&vcc3v3_pcie {
- gpio = <&gpio1 24 GPIO_ACTIVE_HIGH>;
-};
-
-&vcc5v0_host {
- gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/usb/pd.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Firefly-RK3399 Board";
- compatible = "firefly,firefly-rk3399", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- enable-gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- pwms = <&pwm0 0 25000 0>;
- brightness-levels = <
- 0 1 2 3 4 5 6 7
- 8 9 10 11 12 13 14 15
- 16 17 18 19 20 21 22 23
- 24 25 26 27 28 29 30 31
- 32 33 34 35 36 37 38 39
- 40 41 42 43 44 45 46 47
- 48 49 50 51 52 53 54 55
- 56 57 58 59 60 61 62 63
- 64 65 66 67 68 69 70 71
- 72 73 74 75 76 77 78 79
- 80 81 82 83 84 85 86 87
- 88 89 90 91 92 93 94 95
- 96 97 98 99 100 101 102 103
- 104 105 106 107 108 109 110 111
- 112 113 114 115 116 117 118 119
- 120 121 122 123 124 125 126 127
- 128 129 130 131 132 133 134 135
- 136 137 138 139 140 141 142 143
- 144 145 146 147 148 149 150 151
- 152 153 154 155 156 157 158 159
- 160 161 162 163 164 165 166 167
- 168 169 170 171 172 173 174 175
- 176 177 178 179 180 181 182 183
- 184 185 186 187 188 189 190 191
- 192 193 194 195 196 197 198 199
- 200 201 202 203 204 205 206 207
- 208 209 210 211 212 213 214 215
- 216 217 218 219 220 221 222 223
- 224 225 226 227 228 229 230 231
- 232 233 234 235 236 237 238 239
- 240 241 242 243 244 245 246 247
- 248 249 250 251 252 253 254 255>;
- default-brightness-level = <200>;
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- dc_12v: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- key-power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&ir_int>;
- pinctrl-names = "default";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
-
- work_led: led-0 {
- label = "work";
- default-state = "on";
- gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- };
-
- diy_led: led-1 {
- label = "diy";
- default-state = "off";
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- };
- };
-
- rt5640-sound {
- compatible = "simple-audio-card";
- simple-audio-card,name = "rockchip,rt5640-codec";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Headphone", "Headphone Jack";
- simple-audio-card,routing =
- "Mic Jack", "MICBIAS1",
- "IN1P", "Mic Jack",
- "Headphone Jack", "HPOL",
- "Headphone Jack", "HPOR";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&rt5640>;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- sound-dit {
- compatible = "audio-graph-card";
- label = "SPDIF";
- dais = <&spdif_p0>;
- };
-
- spdif-dit {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
-
- port {
- dit_p0_0: endpoint {
- remote-endpoint = <&spdif_p0_0>;
- };
- };
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pwr_en>;
- regulator-name = "vcc3v3_pcie";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc_12v>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sys>;
- };
-
- /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc5v0_typec: vcc5v0-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec_en>;
- regulator-name = "vcc5v0_typec";
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vcc_sys>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <430000>;
- regulator-max-microvolt = <1400000>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sys>;
- vcc10-supply = <&vcc_sys>;
- vcc11-supply = <&vcc_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc1v8_pmu>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc2v8_dvp: LDO_REG2 {
- regulator-name = "vcc2v8_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmu: LDO_REG3 {
- regulator-name = "vcc1v8_pmu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <0>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-
- rt5640: rt5640@1c {
- compatible = "realtek,rt5640";
- reg = <0x1c>;
- clocks = <&cru SCLK_I2S_8CH_OUT>;
- clock-names = "mclk";
- realtek,in1-differential;
- #sound-dai-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&rt5640_hpcon>;
- };
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb0: typec-portc@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vcc5v0_typec>;
- status = "okay";
-
- connector {
- compatible = "usb-c-connector";
- data-role = "host";
- label = "USB-C";
- op-sink-microwatt = <1000000>;
- power-role = "dual";
- sink-pdos =
- <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
- source-pdos =
- <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
- try-power-role = "sink";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- usbc_hs: endpoint {
- remote-endpoint =
- <&u2phy0_typec_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- usbc_ss: endpoint {
- remote-endpoint =
- <&tcphy0_typec_ss>;
- };
- };
- };
- };
- };
-
- accelerometer@68 {
- compatible = "invensense,mpu6500";
- reg = <0x68>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
- };
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcca1v8_codec>;
- sdmmc-supply = <&vcc_sdio>;
- gpio1830-supply = <&vcc_3v0>;
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- fusb302x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- ir {
- ir_int: ir-int {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lcd-panel {
- lcd_panel_reset: lcd-panel-reset {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- work_led_pin: work-led-pin {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- diy_led_pin: diy-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_pwr_en: pcie-pwr-en {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_3g_drv: pcie-3g-drv {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- rt5640 {
- rt5640_hpcon: rt5640-hpcon {
- rockchip,pins = <4 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb-typec {
- vcc5v0_typec_en: vcc5v0_typec_en {
- rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdio0 {
- /* WiFi & BT combo module Ampak AP6356S */
- bus-width = <4>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
-
- /* Power supply */
- vqmmc-supply = <&vcc1v8_s3>; /* IO line */
- vmmc-supply = <&vcc_sdio>; /* card's power */
-
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- brcm,drive-strength = <5>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&spdif {
- pinctrl-0 = <&spdif_bus_1>;
- status = "okay";
-
- spdif_p0: port {
- spdif_p0_0: endpoint {
- remote-endpoint = <&dit_p0_0>;
- };
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy0_usb3 {
- port {
- tcphy0_typec_ss: endpoint {
- remote-endpoint = <&usbc_ss>;
- };
- };
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-
- port {
- u2phy0_typec_hs: endpoint {
- remote-endpoint = <&usbc_hs>;
- };
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "otg";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru-Bob Rev 4+ board device tree source
- *
- * Copyright 2018 Google, Inc
- */
-
-/dts-v1/;
-#include "rk3399-gru-chromebook.dtsi"
-
-/ {
- model = "Google Bob";
- compatible = "google,bob-rev13", "google,bob-rev12",
- "google,bob-rev11", "google,bob-rev10",
- "google,bob-rev9", "google,bob-rev8",
- "google,bob-rev7", "google,bob-rev6",
- "google,bob-rev5", "google,bob-rev4",
- "google,bob", "google,gru", "rockchip,rk3399";
- chassis-type = "convertible";
-
- edp_panel: edp-panel {
- compatible = "boe,nv101wxmn51";
- backlight = <&backlight>;
- power-supply = <&pp3300_disp>;
-
- port {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
-};
-
-&ap_i2c_ts {
- touchscreen: touchscreen@10 {
- compatible = "elan,ekth3500";
- reg = <0x10>;
- interrupt-parent = <&gpio3>;
- interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&touch_int_l &touch_reset_l>;
- reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
- };
-};
-
-&ap_i2c_tp {
- trackpad: trackpad@15 {
- compatible = "elan,ekth3000";
- reg = <0x15>;
- interrupt-parent = <&gpio1>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&trackpad_int_l>;
- wakeup-source;
- };
-};
-
-&backlight {
- pwms = <&cros_ec_pwm 0>;
-};
-
-&cpu_alert0 {
- temperature = <65000>;
-};
-
-&cpu_alert1 {
- temperature = <70000>;
-};
-
-&spi0 {
- status = "okay";
-
- tpm@0 {
- compatible = "google,cr50";
- reg = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <5 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&h1_int_od_l>;
- spi-max-frequency = <800000>;
- };
-};
-
-&pinctrl {
- tpm {
- h1_int_od_l: h1-int-od-l {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&wlan_host_wake_l {
- /* Kevin has an external pull up, but Bob does not. */
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru-Chromebook shared properties
- *
- * Copyright 2018 Google, Inc
- */
-
-#include "rk3399-gru.dtsi"
-
-/ {
- pp900_ap: pp900-ap {
- compatible = "regulator-fixed";
- regulator-name = "pp900_ap";
-
- /* EC turns on w/ pp900_ap_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- /* EC turns on w/ pp900_usb_en */
- pp900_usb: pp900-ap {
- };
-
- /* EC turns on w/ pp900_pcie_en */
- pp900_pcie: pp900-ap {
- };
-
- pp3000: pp3000 {
- compatible = "regulator-fixed";
- regulator-name = "pp3000";
- pinctrl-names = "default";
- pinctrl-0 = <&pp3000_en>;
-
- enable-active-high;
- gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
-
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- ppvar_centerlogic_pwm: ppvar-centerlogic-pwm {
- compatible = "pwm-regulator";
- regulator-name = "ppvar_centerlogic_pwm";
-
- pwms = <&pwm3 0 3337 0>;
- pwm-supply = <&ppvar_sys>;
- pwm-dutycycle-range = <100 0>;
- pwm-dutycycle-unit = <100>;
-
- /* EC turns on w/ ppvar_centerlogic_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <799434>;
- regulator-max-microvolt = <1049925>;
- };
-
- ppvar_centerlogic: ppvar-centerlogic {
- compatible = "vctrl-regulator";
- regulator-name = "ppvar_centerlogic";
-
- regulator-min-microvolt = <799434>;
- regulator-max-microvolt = <1049925>;
-
- ctrl-supply = <&ppvar_centerlogic_pwm>;
- ctrl-voltage-range = <799434 1049925>;
-
- regulator-settling-time-up-us = <378>;
- min-slew-down-rate = <225>;
- ovp-threshold-percent = <16>;
- };
-
- /* Schematics call this PPVAR even though it's fixed */
- ppvar_logic: ppvar-logic {
- compatible = "regulator-fixed";
- regulator-name = "ppvar_logic";
-
- /* EC turns on w/ ppvar_logic_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp1800_audio: pp1800-audio {
- compatible = "regulator-fixed";
- regulator-name = "pp1800_audio";
- pinctrl-names = "default";
- pinctrl-0 = <&pp1800_audio_en>;
-
- enable-active-high;
- gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>;
-
- regulator-always-on;
- regulator-boot-on;
-
- vin-supply = <&pp1800>;
- };
-
- /* gpio is shared with pp3300_wifi_bt */
- pp1800_pcie: pp1800-pcie {
- compatible = "regulator-fixed";
- regulator-name = "pp1800_pcie";
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_module_pd_l>;
-
- enable-active-high;
- gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
- /*
- * Need to wait 1ms + ramp-up time before we can power on WiFi.
- * This has been approximated as 8ms total.
- */
- regulator-enable-ramp-delay = <8000>;
-
- vin-supply = <&pp1800>;
- };
-
- /* Always on; plain and simple */
- pp3000_ap: pp3000_emmc: pp3000 {
- };
-
- pp1500_ap_io: pp1500-ap-io {
- compatible = "regulator-fixed";
- regulator-name = "pp1500_ap_io";
- pinctrl-names = "default";
- pinctrl-0 = <&pp1500_en>;
-
- enable-active-high;
- gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>;
-
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
-
- vin-supply = <&pp1800>;
- };
-
- pp3300_disp: pp3300-disp {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_disp";
- pinctrl-names = "default";
- pinctrl-0 = <&pp3300_disp_en>;
-
- enable-active-high;
- gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>;
-
- startup-delay-us = <2000>;
- vin-supply = <&pp3300>;
- };
-
- /* EC turns on w/ pp3300_usb_en_l */
- pp3300_usb: pp3300 {
- };
-
- /* gpio is shared with pp1800_pcie and pinctrl is set there */
- pp3300_wifi_bt: pp3300-wifi-bt {
- compatible = "regulator-fixed";
- regulator-name = "pp3300_wifi_bt";
-
- enable-active-high;
- gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>;
-
- vin-supply = <&pp3300>;
- };
-
- /*
- * This is a bit of a hack. The WiFi module should be reset at least
- * 1ms after its regulators have ramped up (max rampup time is ~7ms).
- * With some stretching of the imagination, we can call the 1.8V
- * regulator a supply.
- */
- wlan_pd_n: wlan-pd-n {
- compatible = "regulator-fixed";
- regulator-name = "wlan_pd_n";
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_module_reset_l>;
-
- enable-active-high;
- gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>;
-
- vin-supply = <&pp1800_pcie>;
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- power-supply = <&pp3300_disp>;
- pinctrl-names = "default";
- pinctrl-0 = <&bl_en>;
- };
-
- gpio_keys: gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l>;
-
- wake_on_bt: key-wake-on-bt {
- label = "Wake-on-Bluetooth";
- gpios = <&gpio0 3 GPIO_ACTIVE_LOW>;
- linux,code = <KEY_WAKEUP>;
- wakeup-source;
- };
- };
-};
-
-&ppvar_bigcpu {
- min-slew-down-rate = <225>;
- ovp-threshold-percent = <16>;
-};
-
-&ppvar_litcpu {
- min-slew-down-rate = <225>;
- ovp-threshold-percent = <16>;
-};
-
-&ppvar_gpu {
- min-slew-down-rate = <225>;
- ovp-threshold-percent = <16>;
-};
-
-&cdn_dp {
- extcon = <&usbc_extcon0>, <&usbc_extcon1>;
-};
-
-&dmc {
- center-supply = <&ppvar_centerlogic>;
- rockchip,pd-idle-dis-freq-hz = <800000000>;
- rockchip,sr-idle-dis-freq-hz = <800000000>;
- rockchip,sr-mc-gate-idle-dis-freq-hz = <800000000>;
-};
-
-&edp {
- status = "okay";
-
- /*
- * eDP PHY/clk don't sync reliably at anything other than 24 MHz. Only
- * set this here, because rk3399-gru.dtsi ensures we can generate this
- * off GPLL=600MHz, whereas some other RK3399 boards may not.
- */
- assigned-clocks = <&cru PCLK_EDP>;
- assigned-clock-rates = <24000000>;
-
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&gpio0 {
- gpio-line-names = /* GPIO0 A 0-7 */
- "AP_RTC_CLK_IN",
- "EC_AP_INT_L",
- "PP1800_AUDIO_EN",
- "BT_HOST_WAKE_L",
- "WLAN_MODULE_PD_L",
- "H1_INT_OD_L",
- "CENTERLOGIC_DVS_PWM",
- "",
-
- /* GPIO0 B 0-4 */
- "WIFI_HOST_WAKE_L",
- "PMUIO2_33_18_L",
- "PP1500_EN",
- "AP_EC_WARM_RESET_REQ",
- "PP3000_EN";
-};
-
-&gpio1 {
- gpio-line-names = /* GPIO1 A 0-7 */
- "",
- "",
- "SPK_PA_EN",
- "",
- "TRACKPAD_INT_L",
- "AP_EC_S3_S0_L",
- "AP_EC_OVERTEMP",
- "AP_SPI_FLASH_MISO",
-
- /* GPIO1 B 0-7 */
- "AP_SPI_FLASH_MOSI_R",
- "AP_SPI_FLASH_CLK_R",
- "AP_SPI_FLASH_CS_L_R",
- "WLAN_MODULE_RESET_L",
- "WIFI_DISABLE_L",
- "MIC_INT",
- "",
- "AP_I2C_DVS_SDA",
-
- /* GPIO1 C 0-7 */
- "AP_I2C_DVS_SCL",
- "AP_BL_EN",
- /*
- * AP_FLASH_WP is crossystem ABI. Schematics call it
- * AP_FW_WP or CPU1_FW_WP, depending on the variant.
- */
- "AP_FLASH_WP",
- "LITCPU_DVS_PWM",
- "AP_I2C_AUDIO_SDA",
- "AP_I2C_AUDIO_SCL",
- "",
- "HEADSET_INT_L";
-};
-
-&gpio2 {
- gpio-line-names = /* GPIO2 A 0-7 */
- "",
- "",
- "SD_IO_PWR_EN",
- "",
- "",
- "",
- "",
- "",
-
- /* GPIO2 B 0-7 */
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
-
- /* GPIO2 C 0-7 */
- "",
- "",
- "",
- "",
- "AP_SPI_EC_MISO",
- "AP_SPI_EC_MOSI",
- "AP_SPI_EC_CLK",
- "AP_SPI_EC_CS_L",
-
- /* GPIO2 D 0-4 */
- "BT_DEV_WAKE_L",
- "",
- "WIFI_PCIE_CLKREQ_L",
- "WIFI_PERST_L",
- "SD_PWR_3000_1800_L";
-};
-
-&gpio3 {
- gpio-line-names = /* GPIO3 A 0-7 */
- "",
- "",
- "",
- "",
- "AP_SPI_TPM_MISO",
- "AP_SPI_TPM_MOSI_R",
- "AP_SPI_TPM_CLK_R",
- "AP_SPI_TPM_CS_L_R",
-
- /* GPIO3 B 0-7 */
- "EC_IN_RW",
- "",
- "AP_I2C_TP_SDA",
- "AP_I2C_TP_SCL",
- "AP_I2C_TP_PU_EN",
- "TOUCH_INT_L",
- "",
- "",
-
- /* GPIO3 C 0-7 */
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
-
- /* GPIO3 D 0-7 */
- "I2S0_SCLK",
- "I2S0_LRCK_RX",
- "I2S0_LRCK_TX",
- "I2S0_SDI_0",
- "I2S0_SDI_1",
- "",
- "I2S0_SDO_1",
- "I2S0_SDO_0";
-};
-
-&gpio4 {
- gpio-line-names = /* GPIO4 A 0-7 */
- "I2S_MCLK",
- "AP_I2C_MIC_SDA",
- "AP_I2C_MIC_SCL",
- "",
- "",
- "",
- "",
- "",
-
- /* GPIO4 B 0-7 */
- "",
- "",
- "",
- "",
- "",
- "",
- "",
- "",
-
- /* GPIO4 C 0-7 */
- "AP_I2C_TS_SDA",
- "AP_I2C_TS_SCL",
- "GPU_DVS_PWM",
- "UART_DBG_TX_AP_RX",
- "UART_AP_TX_DBG_RX",
- "",
- "BIGCPU_DVS_PWM",
- "EDP_HPD_3V0",
-
- /* GPIO4 D 0-5 */
- "SD_CARD_DET_L",
- "USB_DP_HPD",
- "TOUCH_RESET_L",
- "PP3300_DISP_EN",
- "",
- "SD_SLOT_PWR_EN";
-};
-
-ap_i2c_mic: &i2c1 {
- status = "okay";
-
- clock-frequency = <400000>;
-
- /* These are relatively safe rise/fall times */
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-
- headsetcodec: rt5514@57 {
- compatible = "realtek,rt5514";
- reg = <0x57>;
- realtek,dmic-init-delay-ms = <20>;
- };
-};
-
-ap_i2c_tp: &i2c5 {
- status = "okay";
-
- clock-frequency = <400000>;
-
- /* These are relatively safe rise/fall times */
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-
- /*
- * Note strange pullup enable. Apparently this avoids leakage but
- * still allows us to get nice 4.7K pullups for high speed i2c
- * transfers. Basically we want the pullup on whenever the ap is
- * alive, so the "en" pin just gets set to output high.
- */
- pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>;
-};
-
-&cros_ec {
- cros_ec_pwm: pwm {
- compatible = "google,cros-ec-pwm";
- #pwm-cells = <1>;
- };
-
- usbc_extcon1: extcon1 {
- compatible = "google,extcon-usbc-cros-ec";
- google,usb-port-id = <1>;
- };
-};
-
-&sound {
- rockchip,codec = <&max98357a &headsetcodec
- &codec &wacky_spi_audio &cdn_dp>;
-};
-
-&spi2 {
- wacky_spi_audio: spi2@0 {
- compatible = "realtek,rt5514";
- reg = <0>;
- interrupt-parent = <&gpio1>;
- interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&mic_int>;
- /* May run faster once verified. */
- spi-max-frequency = <10000000>;
- wakeup-source;
- };
-};
-
-&pci_rootport {
- mvl_wifi: wifi@0,0 {
- compatible = "pci1b4b,2b42";
- reg = <0x0000 0x0 0x0 0x0 0x0>;
- interrupt-parent = <&gpio0>;
- interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&wlan_host_wake_l>;
- wakeup-source;
- };
-};
-
-&tcphy1 {
- status = "okay";
- extcon = <&usbc_extcon1>;
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
- extcon = <&usbc_extcon1>;
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&pinctrl {
- discrete-regulators {
- pp1500_en: pp1500-en {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO
- &pcfg_pull_none>;
- };
-
- pp1800_audio_en: pp1800-audio-en {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO
- &pcfg_pull_down>;
- };
-
- pp3000_en: pp3000-en {
- rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO
- &pcfg_pull_none>;
- };
-
- pp3300_disp_en: pp3300-disp-en {
- rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO
- &pcfg_pull_none>;
- };
-
- wlan_module_pd_l: wlan-module-pd-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO
- &pcfg_pull_down>;
- };
- };
-};
-
-&wifi {
- wifi_perst_l: wifi-perst-l {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wlan_host_wake_l: wlan-host-wake-l {
- /* Kevin has an external pull up, but Bob does not */
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru-Kevin Rev 6+ board device tree source
- *
- * Copyright 2016-2017 Google, Inc
- */
-
-/dts-v1/;
-#include "rk3399-gru-chromebook.dtsi"
-#include <dt-bindings/input/linux-event-codes.h>
-
-/*
- * Kevin-specific things
- *
- * Things in this section should use names from Kevin schematic since no
- * equivalent exists in Gru schematic. If referring to signals that exist
- * in Gru we use the Gru names, though. Confusing enough for you?
- */
-/ {
- model = "Google Kevin";
- compatible = "google,kevin-rev15", "google,kevin-rev14",
- "google,kevin-rev13", "google,kevin-rev12",
- "google,kevin-rev11", "google,kevin-rev10",
- "google,kevin-rev9", "google,kevin-rev8",
- "google,kevin-rev7", "google,kevin-rev6",
- "google,kevin", "google,gru", "rockchip,rk3399";
- chassis-type = "convertible";
-
- /* Power tree */
-
- p3_3v_dig: p3-3v-dig {
- compatible = "regulator-fixed";
- regulator-name = "p3.3v_dig";
- pinctrl-names = "default";
- pinctrl-0 = <&cpu3_pen_pwr_en>;
-
- enable-active-high;
- gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>;
- vin-supply = <&pp3300>;
- };
-
- edp_panel: edp-panel {
- compatible = "sharp,lq123p1jx31";
- backlight = <&backlight>;
- power-supply = <&pp3300_disp>;
-
- panel-timing {
- clock-frequency = <266666667>;
- hactive = <2400>;
- hfront-porch = <48>;
- hback-porch = <84>;
- hsync-len = <32>;
- hsync-active = <0>;
- vactive = <1600>;
- vfront-porch = <3>;
- vback-porch = <120>;
- vsync-len = <10>;
- vsync-active = <0>;
- };
-
- port {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
-
- thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu {
- compatible = "murata,ncp15wb473";
- pullup-uv = <1800000>;
- pullup-ohm = <25500>;
- pulldown-ohm = <0>;
- io-channels = <&saradc 2>;
- #thermal-sensor-cells = <0>;
- };
-
- thermistor_ppvar_litcpu: thermistor-ppvar-litcpu {
- compatible = "murata,ncp15wb473";
- pullup-uv = <1800000>;
- pullup-ohm = <25500>;
- pulldown-ohm = <0>;
- io-channels = <&saradc 3>;
- #thermal-sensor-cells = <0>;
- };
-};
-
-&backlight {
- pwms = <&cros_ec_pwm 1>;
-};
-
-&gpio_keys {
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>;
-
- switch-pen-insert {
- label = "Pen Insert";
- /* Insert = low, eject = high */
- gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
- linux,code = <SW_PEN_INSERTED>;
- linux,input-type = <EV_SW>;
- wakeup-source;
- };
-};
-
-&thermal_zones {
- bigcpu_reg_thermal: bigcpu-reg-thermal {
- polling-delay-passive = <100>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
- thermal-sensors = <&thermistor_ppvar_bigcpu 0>;
- sustainable-power = <4000>;
-
- ppvar_bigcpu_trips: trips {
- ppvar_bigcpu_on: ppvar-bigcpu-on {
- temperature = <40000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ppvar_bigcpu_alert: ppvar-bigcpu-alert {
- temperature = <50000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ppvar_bigcpu_crit: ppvar-bigcpu-crit {
- temperature = <90000>; /* millicelsius */
- hysteresis = <0>; /* millicelsius */
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&ppvar_bigcpu_alert>;
- cooling-device =
- <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- contribution = <4096>;
- };
- map1 {
- trip = <&ppvar_bigcpu_alert>;
- cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- contribution = <1024>;
- };
- };
- };
-
- litcpu_reg_thermal: litcpu-reg-thermal {
- polling-delay-passive = <100>; /* milliseconds */
- polling-delay = <1000>; /* milliseconds */
- thermal-sensors = <&thermistor_ppvar_litcpu 0>;
- sustainable-power = <4000>;
-
- ppvar_litcpu_trips: trips {
- ppvar_litcpu_on: ppvar-litcpu-on {
- temperature = <40000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ppvar_litcpu_alert: ppvar-litcpu-alert {
- temperature = <50000>; /* millicelsius */
- hysteresis = <2000>; /* millicelsius */
- type = "passive";
- };
-
- ppvar_litcpu_crit: ppvar-litcpu-crit {
- temperature = <90000>; /* millicelsius */
- hysteresis = <0>; /* millicelsius */
- type = "critical";
- };
- };
- };
-};
-
-ap_i2c_tpm: &i2c0 {
- status = "okay";
-
- clock-frequency = <400000>;
-
- /* These are relatively safe rise/fall times. */
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-
- tpm: tpm@20 {
- compatible = "infineon,slb9645tt";
- reg = <0x20>;
- powered-while-suspended;
- };
-};
-
-ap_i2c_dig: &i2c2 {
- status = "okay";
-
- clock-frequency = <400000>;
-
- /* These are relatively safe rise/fall times. */
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-
- digitizer: digitizer@9 {
- /* wacom,w9013 */
- compatible = "hid-over-i2c";
- reg = <0x9>;
- pinctrl-names = "default";
- pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>;
-
- vdd-supply = <&p3_3v_dig>;
- post-power-on-delay-ms = <100>;
-
- interrupt-parent = <&gpio2>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
-
- hid-descr-addr = <0x1>;
- };
-};
-
-/* Adjustments to things in the gru baseboard */
-
-&ap_i2c_tp {
- trackpad@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- pinctrl-names = "default";
- pinctrl-0 = <&trackpad_int_l>;
- interrupt-parent = <&gpio1>;
- interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
- linux,gpio-keymap = <KEY_RESERVED
- KEY_RESERVED
- KEY_RESERVED
- BTN_LEFT>;
- wakeup-source;
- };
-};
-
-&ap_i2c_ts {
- touchscreen@4b {
- compatible = "atmel,maxtouch";
- reg = <0x4b>;
- pinctrl-names = "default";
- pinctrl-0 = <&touch_int_l>;
- interrupt-parent = <&gpio3>;
- interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&ppvar_bigcpu_pwm {
- regulator-min-microvolt = <798674>;
- regulator-max-microvolt = <1302172>;
-};
-
-&ppvar_bigcpu {
- regulator-min-microvolt = <798674>;
- regulator-max-microvolt = <1302172>;
- ctrl-voltage-range = <798674 1302172>;
-};
-
-&ppvar_litcpu_pwm {
- regulator-min-microvolt = <799065>;
- regulator-max-microvolt = <1303738>;
-};
-
-&ppvar_litcpu {
- regulator-min-microvolt = <799065>;
- regulator-max-microvolt = <1303738>;
- ctrl-voltage-range = <799065 1303738>;
-};
-
-&ppvar_gpu_pwm {
- regulator-min-microvolt = <785782>;
- regulator-max-microvolt = <1217729>;
-};
-
-&ppvar_gpu {
- regulator-min-microvolt = <785782>;
- regulator-max-microvolt = <1217729>;
- ctrl-voltage-range = <785782 1217729>;
-};
-
-&ppvar_centerlogic_pwm {
- regulator-min-microvolt = <800069>;
- regulator-max-microvolt = <1049692>;
-};
-
-&ppvar_centerlogic {
- regulator-min-microvolt = <800069>;
- regulator-max-microvolt = <1049692>;
- ctrl-voltage-range = <800069 1049692>;
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&pp1800_ap_io>;
-};
-
-&mvl_wifi {
- marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */
-};
-
-&pinctrl {
- digitizer {
- /* Has external pullup */
- cpu1_dig_irq_l: cpu1-dig-irq-l {
- rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- /* Has external pullup */
- cpu1_dig_pdct_l: cpu1-dig-pdct-l {
- rockchip,pins = <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- discrete-regulators {
- cpu3_pen_pwr_en: cpu3-pen-pwr-en {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pen {
- cpu1_pen_eject: cpu1-pen-eject {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Gru (and derivatives) board device tree source
- *
- * Copyright 2016-2017 Google, Inc
- */
-
-#include <dt-bindings/input/input.h>
-#include "rk3399.dtsi"
-#include "rk3399-op1-opp.dtsi"
-
-/ {
- aliases {
- mmc0 = &sdmmc;
- mmc1 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- /*
- * Power Tree
- *
- * In general an attempt is made to include all rails called out by
- * the schematic as long as those rails interact in some way with
- * the AP. AKA:
- * - Rails that only connect to the EC (or devices that the EC talks to)
- * are not included.
- * - Rails _are_ included if the rails go to the AP even if the AP
- * doesn't currently care about them / they are always on. The idea
- * here is that it makes it easier to map to the schematic or extend
- * later.
- *
- * If two rails are substantially the same from the AP's point of
- * view, though, we won't create a full fixed regulator. We'll just
- * put the child rail as an alias of the parent rail. Sometimes rails
- * look the same to the AP because one of these is true:
- * - The EC controls the enable and the EC always enables a rail as
- * long as the AP is running.
- * - The rails are actually connected to each other by a jumper and
- * the distinction is just there to add clarity/flexibility to the
- * schematic.
- */
-
- ppvar_sys: ppvar-sys {
- compatible = "regulator-fixed";
- regulator-name = "ppvar_sys";
- regulator-always-on;
- regulator-boot-on;
- };
-
- pp1200_lpddr: pp1200-lpddr {
- compatible = "regulator-fixed";
- regulator-name = "pp1200_lpddr";
-
- /* EC turns on w/ lpddr_pwr_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp1800: pp1800 {
- compatible = "regulator-fixed";
- regulator-name = "pp1800";
-
- /* Always on when ppvar_sys shows power good */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp3300: pp3300 {
- compatible = "regulator-fixed";
- regulator-name = "pp3300";
-
- /* Always on; plain and simple */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- pp5000: pp5000 {
- compatible = "regulator-fixed";
- regulator-name = "pp5000";
-
- /* EC turns on w/ pp5000_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
-
- vin-supply = <&ppvar_sys>;
- };
-
- ppvar_bigcpu_pwm: ppvar-bigcpu-pwm {
- compatible = "pwm-regulator";
- regulator-name = "ppvar_bigcpu_pwm";
-
- pwms = <&pwm1 0 3337 0>;
- pwm-supply = <&ppvar_sys>;
- pwm-dutycycle-range = <100 0>;
- pwm-dutycycle-unit = <100>;
-
- /* EC turns on w/ ap_core_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800107>;
- regulator-max-microvolt = <1302232>;
- };
-
- ppvar_bigcpu: ppvar-bigcpu {
- compatible = "vctrl-regulator";
- regulator-name = "ppvar_bigcpu";
-
- regulator-min-microvolt = <800107>;
- regulator-max-microvolt = <1302232>;
-
- ctrl-supply = <&ppvar_bigcpu_pwm>;
- ctrl-voltage-range = <800107 1302232>;
-
- regulator-settling-time-up-us = <322>;
- };
-
- ppvar_litcpu_pwm: ppvar-litcpu-pwm {
- compatible = "pwm-regulator";
- regulator-name = "ppvar_litcpu_pwm";
-
- pwms = <&pwm2 0 3337 0>;
- pwm-supply = <&ppvar_sys>;
- pwm-dutycycle-range = <100 0>;
- pwm-dutycycle-unit = <100>;
-
- /* EC turns on w/ ap_core_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <797743>;
- regulator-max-microvolt = <1307837>;
- };
-
- ppvar_litcpu: ppvar-litcpu {
- compatible = "vctrl-regulator";
- regulator-name = "ppvar_litcpu";
-
- regulator-min-microvolt = <797743>;
- regulator-max-microvolt = <1307837>;
-
- ctrl-supply = <&ppvar_litcpu_pwm>;
- ctrl-voltage-range = <797743 1307837>;
-
- regulator-settling-time-up-us = <384>;
- };
-
- ppvar_gpu_pwm: ppvar-gpu-pwm {
- compatible = "pwm-regulator";
- regulator-name = "ppvar_gpu_pwm";
-
- pwms = <&pwm0 0 3337 0>;
- pwm-supply = <&ppvar_sys>;
- pwm-dutycycle-range = <100 0>;
- pwm-dutycycle-unit = <100>;
-
- /* EC turns on w/ ap_core_en; always on for AP */
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <786384>;
- regulator-max-microvolt = <1217747>;
- };
-
- ppvar_gpu: ppvar-gpu {
- compatible = "vctrl-regulator";
- regulator-name = "ppvar_gpu";
-
- regulator-min-microvolt = <786384>;
- regulator-max-microvolt = <1217747>;
-
- ctrl-supply = <&ppvar_gpu_pwm>;
- ctrl-voltage-range = <786384 1217747>;
-
- regulator-settling-time-up-us = <390>;
- };
-
- /* EC turns on w/ pp900_ddrpll_en */
- pp900_ddrpll: pp900-ap {
- };
-
- /* EC turns on w/ pp900_pll_en */
- pp900_pll: pp900-ap {
- };
-
- /* EC turns on w/ pp900_pmu_en */
- pp900_pmu: pp900-ap {
- };
-
- /* EC turns on w/ pp1800_s0_en_l */
- pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 {
- };
-
- /* EC turns on w/ pp1800_avdd_en_l */
- pp1800_avdd: pp1800 {
- };
-
- /* EC turns on w/ pp1800_lid_en_l */
- pp1800_lid: pp1800_mic: pp1800 {
- };
-
- /* EC turns on w/ lpddr_pwr_en */
- pp1800_lpddr: pp1800 {
- };
-
- /* EC turns on w/ pp1800_pmu_en_l */
- pp1800_pmu: pp1800 {
- };
-
- /* EC turns on w/ pp1800_usb_en_l */
- pp1800_usb: pp1800 {
- };
-
- pp3000_sd_slot: pp3000-sd-slot {
- compatible = "regulator-fixed";
- regulator-name = "pp3000_sd_slot";
- pinctrl-names = "default";
- pinctrl-0 = <&sd_slot_pwr_en>;
-
- enable-active-high;
- gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>;
-
- vin-supply = <&pp3000>;
- };
-
- /*
- * Technically, this is a small abuse of 'regulator-gpio'; this
- * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are
- * always on though, so it is sufficient to simply control the mux
- * here.
- */
- ppvar_sd_card_io: ppvar-sd-card-io {
- compatible = "regulator-gpio";
- regulator-name = "ppvar_sd_card_io";
- pinctrl-names = "default";
- pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>;
-
- enable-active-high;
- enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1>,
- <3000000 0x0>;
-
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- };
-
- /* EC turns on w/ pp3300_trackpad_en_l */
- pp3300_trackpad: pp3300-trackpad {
- };
-
- /* EC turns on w/ usb_a_en */
- pp5000_usb_a_vbus: pp5000 {
- };
-
- ap_rtc_clk: ap-rtc-clk {
- compatible = "fixed-clock";
- clock-frequency = <32768>;
- clock-output-names = "xin32k";
- #clock-cells = <0>;
- };
-
- max98357a: max98357a {
- compatible = "maxim,max98357a";
- pinctrl-names = "default";
- pinctrl-0 = <&sdmode_en>;
- sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
- sdmode-delay = <2>;
- #sound-dai-cells = <0>;
- status = "okay";
- };
-
- sound: sound {
- compatible = "rockchip,rk3399-gru-sound";
- rockchip,cpu = <&i2s0 &spdif>;
- };
-};
-
-&cdn_dp {
- status = "okay";
-};
-
-/*
- * Set some suspend operating points to avoid OVP in suspend
- *
- * When we go into S3 ARM Trusted Firmware will transition our PWM regulators
- * from wherever they're at back to the "default" operating point (whatever
- * voltage we get when we set the PWM pins to "input").
- *
- * This quick transition under light load has the possibility to trigger the
- * regulator "over voltage protection" (OVP).
- *
- * To make extra certain that we don't hit this OVP at suspend time, we'll
- * transition to a voltage that's much closer to the default (~1.0 V) so that
- * there will not be a big jump. Technically we only need to get within 200 mV
- * of the default voltage, but the speed here should be fast enough and we need
- * suspend/resume to be rock solid.
- */
-
-&cluster0_opp {
- opp05 {
- opp-suspend;
- };
-};
-
-&cluster1_opp {
- opp06 {
- opp-suspend;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_l1 {
- cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_l2 {
- cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_l3 {
- cpu-supply = <&ppvar_litcpu>;
-};
-
-&cpu_b0 {
- cpu-supply = <&ppvar_bigcpu>;
-};
-
-&cpu_b1 {
- cpu-supply = <&ppvar_bigcpu>;
-};
-
-
-&cru {
- assigned-clocks =
- <&cru PLL_GPLL>, <&cru PLL_CPLL>,
- <&cru PLL_NPLL>,
- <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
- <&cru PCLK_PERIHP>,
- <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
- <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
- <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
- <&cru ACLK_VIO>, <&cru ACLK_HDCP>,
- <&cru ACLK_GIC_PRE>,
- <&cru PCLK_DDR>;
- assigned-clock-rates =
- <600000000>, <800000000>,
- <1000000000>,
- <150000000>, <75000000>,
- <37500000>,
- <100000000>, <100000000>,
- <50000000>, <800000000>,
- <100000000>, <50000000>,
- <400000000>, <400000000>,
- <200000000>,
- <200000000>;
-};
-
-&dfi {
- status = "okay";
-};
-
-&dmc {
- status = "okay";
-
- rockchip,pd-idle-ns = <160>;
- rockchip,sr-idle-ns = <10240>;
- rockchip,sr-mc-gate-idle-ns = <40960>;
- rockchip,srpd-lite-idle-ns = <61440>;
- rockchip,standby-idle-ns = <81920>;
-
- rockchip,ddr3_odt_dis_freq = <666000000>;
- rockchip,lpddr3_odt_dis_freq = <666000000>;
- rockchip,lpddr4_odt_dis_freq = <666000000>;
-
- rockchip,sr-mc-gate-idle-dis-freq-hz = <1000000000>;
- rockchip,srpd-lite-idle-dis-freq-hz = <0>;
- rockchip,standby-idle-dis-freq-hz = <928000000>;
-};
-
-&dmc_opp_table {
- opp03 {
- opp-suspend;
- };
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&ppvar_gpu>;
- status = "okay";
-};
-
-ap_i2c_ts: &i2c3 {
- status = "okay";
-
- clock-frequency = <400000>;
-
- /* These are relatively safe rise/fall times */
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-};
-
-ap_i2c_audio: &i2c8 {
- status = "okay";
-
- clock-frequency = <400000>;
-
- /* These are relatively safe rise/fall times */
- i2c-scl-falling-time-ns = <50>;
- i2c-scl-rising-time-ns = <300>;
-
- codec: da7219@1a {
- compatible = "dlg,da7219";
- reg = <0x1a>;
- interrupt-parent = <&gpio1>;
- interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
- clocks = <&cru SCLK_I2S_8CH_OUT>;
- clock-names = "mclk";
- dlg,micbias-lvl = <2600>;
- dlg,mic-amp-in-sel = "diff";
- pinctrl-names = "default";
- pinctrl-0 = <&headset_int_l>;
- VDD-supply = <&pp1800>;
- VDDMIC-supply = <&pp3300>;
- VDDIO-supply = <&pp1800>;
-
- da7219_aad {
- dlg,adc-1bit-rpt = <1>;
- dlg,btn-avg = <4>;
- dlg,btn-cfg = <50>;
- dlg,mic-det-thr = <500>;
- dlg,jack-ins-deb = <20>;
- dlg,jack-det-rate = "32ms_64ms";
- dlg,jack-rem-deb = <1>;
-
- dlg,a-d-btn-thr = <0xa>;
- dlg,d-b-btn-thr = <0x16>;
- dlg,b-c-btn-thr = <0x21>;
- dlg,c-mic-btn-thr = <0x3E>;
- };
- };
-};
-
-&i2s0 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- audio-supply = <&pp1800_audio>; /* APIO5_VDD; 3d 4a */
- bt656-supply = <&pp1800_ap_io>; /* APIO2_VDD; 2a 2b */
- gpio1830-supply = <&pp3000_ap>; /* APIO4_VDD; 4c 4d */
- sdmmc-supply = <&ppvar_sd_card_io>; /* SDMMC0_VDD; 4b */
-};
-
-&pcie0 {
- status = "okay";
-
- ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>;
- vpcie3v3-supply = <&pp3300_wifi_bt>;
- vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */
- vpcie0v9-supply = <&pp900_pcie>;
-
- pci_rootport: pcie@0,0 {
- reg = <0x0000 0 0 0 0>;
- #address-cells = <3>;
- #size-cells = <2>;
- ranges;
- device_type = "pci";
- };
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pmu_io_domains {
- status = "okay";
-
- pmu1830-supply = <&pp1800_pmu>; /* PMUIO2_VDD */
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&sdhci {
- /*
- * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the
- * same (or nearly the same) performance for all eMMC that are intended
- * to be used.
- */
- assigned-clock-rates = <150000000>;
-
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- status = "okay";
-
- /*
- * Note: configure "sdmmc_cd" as card detect even though it's actually
- * hooked to ground. Because we specified "cd-gpios" below dw_mmc
- * should be ignoring card detect anyway. Specifying the pin as
- * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag)
- * turned on that the system will still make sure the port is
- * configured as SDMMC and not JTAG.
- */
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_pin
- &sdmmc_bus4>;
-
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
- disable-wp;
- sd-uhs-sdr12;
- sd-uhs-sdr25;
- sd-uhs-sdr50;
- sd-uhs-sdr104;
- vmmc-supply = <&pp3000_sd_slot>;
- vqmmc-supply = <&ppvar_sd_card_io>;
-};
-
-&spdif {
- status = "okay";
-
- /*
- * SPDIF is routed internally to DP; we either don't use these pins, or
- * mux them to something else.
- */
- /delete-property/ pinctrl-0;
- /delete-property/ pinctrl-names;
-};
-
-&spi1 {
- status = "okay";
-
- pinctrl-names = "default", "sleep";
- pinctrl-1 = <&spi1_sleep>;
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
-
- /* May run faster once verified. */
- spi-max-frequency = <10000000>;
- };
-};
-
-&spi2 {
- status = "okay";
-};
-
-&spi5 {
- status = "okay";
-
- cros_ec: ec@0 {
- compatible = "google,cros-ec-spi";
- reg = <0>;
- interrupt-parent = <&gpio0>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ec_ap_int_l>;
- spi-max-frequency = <3000000>;
-
- i2c_tunnel: i2c-tunnel {
- compatible = "google,cros-ec-i2c-tunnel";
- google,remote-bus = <4>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
-
- usbc_extcon0: extcon0 {
- compatible = "google,extcon-usbc-cros-ec";
- google,usb-port-id = <0>;
- };
- };
-};
-
-&tsadc {
- status = "okay";
-
- rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */
-};
-
-&tcphy0 {
- status = "okay";
- extcon = <&usbc_extcon0>;
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy0_host {
- status = "okay";
-};
-
-&u2phy1_host {
- status = "okay";
-};
-
-&u2phy0_otg {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
- extcon = <&usbc_extcon0>;
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
-
-#include <cros-ec-keyboard.dtsi>
-#include <cros-ec-sbs.dtsi>
-
-&pinctrl {
- /*
- * pinctrl settings for pins that have no real owners.
- *
- * At the moment settings are identical for S0 and S3, but if we later
- * need to configure things differently for S3 we'll adjust here.
- */
- pinctrl-names = "default";
- pinctrl-0 = <
- &ap_pwroff /* AP will auto-assert this when in S3 */
- &clk_32k /* This pin is always 32k on gru boards */
- >;
-
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- pcfg_pull_none_8ma: pcfg-pull-none-8ma {
- bias-disable;
- drive-strength = <8>;
- };
-
- backlight-enable {
- bl_en: bl-en {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- cros-ec {
- ec_ap_int_l: ec-ap-int-l {
- rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- discrete-regulators {
- sd_io_pwr_en: sd-io-pwr-en {
- rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO
- &pcfg_pull_none>;
- };
-
- sd_pwr_1800_sel: sd-pwr-1800-sel {
- rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO
- &pcfg_pull_none>;
- };
-
- sd_slot_pwr_en: sd-slot-pwr-en {
- rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO
- &pcfg_pull_none>;
- };
- };
-
- codec {
- /* Has external pullup */
- headset_int_l: headset-int-l {
- rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- mic_int: mic-int {
- rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- max98357a {
- sdmode_en: sdmode-en {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- pcie {
- pcie_clkreqn_cpm: pci-clkreqn-cpm {
- /*
- * Since our pcie doesn't support ClockPM(CPM), we want
- * to hack this as gpio, so the EP could be able to
- * de-assert it along and make ClockPM(CPM) work.
- */
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- /*
- * We run sdmmc at max speed; bump up drive strength.
- * We also have external pulls, so disable the internal ones.
- */
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 RK_PB0 1 &pcfg_pull_none_8ma>,
- <4 RK_PB1 1 &pcfg_pull_none_8ma>,
- <4 RK_PB2 1 &pcfg_pull_none_8ma>,
- <4 RK_PB3 1 &pcfg_pull_none_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 RK_PB4 1 &pcfg_pull_none_8ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 RK_PB5 1 &pcfg_pull_none_8ma>;
- };
-
- /*
- * In our case the official card detect is hooked to ground
- * to avoid getting access to JTAG just by sticking something
- * in the SD card slot (see the force_jtag bit in the TRM).
- *
- * We still configure it as card detect because it doesn't
- * hurt and dw_mmc will ignore it. We make sure to disable
- * the pull though so we don't burn needless power.
- */
- sdmmc_cd: sdmmc-cd {
- rockchip,pins =
- <0 RK_PA7 1 &pcfg_pull_none>;
- };
-
- /* This is where we actually hook up CD; has external pull */
- sdmmc_cd_pin: sdmmc-cd-pin {
- rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- spi1 {
- spi1_sleep: spi1-sleep {
- /*
- * Pull down SPI1 CLK/CS/RX/TX during suspend, to
- * prevent leakage.
- */
- rockchip,pins = <1 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>,
- <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- touchscreen {
- touch_int_l: touch-int-l {
- rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- touch_reset_l: touch-reset-l {
- rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- trackpad {
- ap_i2c_tp_pu_en: ap-i2c-tp-pu-en {
- rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_output_high>;
- };
-
- trackpad_int_l: trackpad-int-l {
- rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- wifi: wifi {
- wlan_module_reset_l: wlan-module-reset-l {
- rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- /* Kevin has an external pull up, but Gru does not */
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- write-protect {
- ap_fw_wp: ap-fw-wp {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include "rk3399-khadas-edge.dtsi"
-
-/ {
- model = "Khadas Edge-Captain";
- compatible = "khadas,edge-captain", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- };
-};
-
-&gmac {
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include "rk3399-khadas-edge.dtsi"
-
-/ {
- model = "Khadas Edge-V";
- compatible = "khadas,edge-v", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- };
-};
-
-&gmac {
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include "rk3399-khadas-edge.dtsi"
-
-/ {
- model = "Khadas Edge";
- compatible = "khadas,edge", "rockchip,rk3399";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Shenzhen Wesion Technology Co., Ltd.
- * (https://www.khadas.com)
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- aliases {
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_LOW>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_pcie";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vsys_3v3>;
- };
-
- /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vsys_5v0>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vsys_3v3>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- };
-
- vsys: vsys {
- compatible = "regulator-fixed";
- regulator-name = "vsys";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vsys_3v3: vsys-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "vsys_3v3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vsys>;
- };
-
- vsys_5v0: vsys-5v0 {
- compatible = "regulator-fixed";
- regulator-name = "vsys_5v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vsys>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
-
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <18000>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- key-power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
- linux,rc-map-name = "rc-khadas";
- pinctrl-names = "default";
- pinctrl-0 = <&ir_rx>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&sys_led_pin>, <&user_led_pin>;
-
- sys_led: led-0 {
- label = "sys_led";
- linux,default-trigger = "heartbeat";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
- };
-
- user_led: led-1 {
- label = "user_led";
- default-state = "off";
- gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_HIGH>;
- };
- };
-
- fan: pwm-fan {
- compatible = "pwm-fan";
- cooling-levels = <0 150 200 255>;
- #cooling-cells = <2>;
- fan-supply = <&vsys_5v0>;
- pwms = <&pwm0 0 40000 0>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_thermal {
- trips {
- cpu_warm: cpu_warm {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- cpu_hot: cpu_hot {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
- };
- };
-
- cooling-maps {
- map2 {
- trip = <&cpu_warm>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
- };
-
- map3 {
- trip = <&cpu_hot>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&gpu_thermal {
- trips {
- gpu_warm: gpu_warm {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- gpu_hot: gpu_hot {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
- };
- };
-
- cooling-maps {
- map1 {
- trip = <&gpu_warm>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
- };
-
- map2 {
- trip = <&gpu_hot>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PC6 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vsys_3v3>;
- vcc2-supply = <&vsys_3v3>;
- vcc3-supply = <&vsys_3v3>;
- vcc4-supply = <&vsys_3v3>;
- vcc6-supply = <&vsys_3v3>;
- vcc7-supply = <&vsys_3v3>;
- vcc8-supply = <&vsys_3v3>;
- vcc9-supply = <&vsys_3v3>;
- vcc10-supply = <&vsys_3v3>;
- vcc11-supply = <&vsys_3v3>;
- vcc12-supply = <&vsys_3v3>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_apio2: LDO_REG1 {
- regulator-name = "vcc1v8_apio2";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_vldo2: LDO_REG2 {
- regulator-name = "vcc_vldo2";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmupll: LDO_REG3 {
- regulator-name = "vcc1v8_pmupll";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG4 {
- regulator-name = "vccio_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_vldo5: LDO_REG5 {
- regulator-name = "vcc_vldo5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcc1v8_codec: LDO_REG7 {
- regulator-name = "vcc1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&cpu_b_sleep>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsys_3v3>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpu_sleep>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vsys_3v3>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c8 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <160>;
- i2c-scl-falling-time-ns = <30>;
- status = "okay";
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- bt656-supply = <&vcc1v8_apio2>;
- audio-supply = <&vcc1v8_codec>;
- sdmmc-supply = <&vccio_sd>;
- gpio1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&pinctrl {
- bt {
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_reg_on_h: bt-reg-on-h {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- ir {
- ir_rx: ir-rx {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- leds {
- sys_led_pin: sys-led-pin {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led_pin: user-led-pin {
- rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- cpu_b_sleep: cpu-b-sleep {
- rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- gpu_sleep: gpu-sleep {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdio0 {
- /* WiFi & BT combo module Ampak AP6356S */
- bus-width = <4>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- vqmmc-supply = <&vcc1v8_s3>;
- vmmc-supply = <&vccio_sd>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- brcm,drive-strength = <5>;
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- non-removable;
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-
- spiflash: flash@0 {
- compatible = "winbond,w25q128fw", "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- max-speed = <4000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
- vbat-supply = <&vsys_3v3>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "otg";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Leez RK3399 P710";
- compatible = "leez,p710", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_reg_on_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- dc5v_adp: dc5v-adp {
- compatible = "regulator-fixed";
- regulator-name = "dc5v_adapter";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc3v3_lan: vcc3v3-lan {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_lan";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_host0: vcc5v0_host1: vcc5v0-host {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_host";
- regulator-boot-on;
- regulator-always-on;
- regulator-min-microvolt = <5500000>;
- regulator-max-microvolt = <5500000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_host3: vcc5v0-host3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_host3";
- enable-active-high;
- gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host3_en>;
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc5v_adp>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vcc5v0_sys>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc3v3_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c7>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_hdmi: LDO_REG2 {
- regulator-name = "vcc1v8_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vccio_sd: LDO_REG4 {
- regulator-name = "vccio_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcc0v9_hdmi: LDO_REG7 {
- regulator-name = "vcc0v9_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_pin>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_pin>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcc_1v8>;
- sdmmc-supply = <&vccio_sd>;
- gpio1830-supply = <&vcc_3v0>;
-};
-
-&pmu_io_domains {
- status = "okay";
- pmu1830-supply = <&vcc_3v0>;
-};
-
-&pinctrl {
- bt {
- bt_reg_on_h: bt-reg-on-h {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- usb2 {
- vcc5v0_host3_en: vcc5v0-host3-en {
- rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_reg_on_h: wifi-reg-on-h {
- rockchip,pins =
- <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- status = "okay";
-
- vref-supply = <&vcc_1v8>;
-};
-
-&sdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- status = "okay";
-
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host0>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host1>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "otg";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPC-T4 board device tree source
- *
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- */
-
-/dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
- model = "FriendlyElec NanoPC-T4";
- compatible = "friendlyarm,nanopc-t4", "rockchip,rk3399";
-
- vcc12v0_sys: vcc12v0-sys {
- compatible = "regulator-fixed";
- regulator-always-on;
- regulator-boot-on;
- regulator-max-microvolt = <12000000>;
- regulator-min-microvolt = <12000000>;
- regulator-name = "vcc12v0_sys";
- };
-
- vcc5v0_host0: vcc5v0-host0 {
- compatible = "regulator-fixed";
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc5v0_host0";
- vin-supply = <&vcc5v0_sys>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
-
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <18000>;
- };
- };
-
- ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_rx>;
- };
-
- fan: pwm-fan {
- compatible = "pwm-fan";
- /*
- * With 20KHz PWM and an EVERCOOL EC4007H12SA fan, these levels
- * work out to 0, ~1200, ~3000, and 5000RPM respectively.
- */
- cooling-levels = <0 12 18 255>;
- #cooling-cells = <2>;
- fan-supply = <&vcc12v0_sys>;
- pwms = <&pwm1 0 50000 0>;
- };
-};
-
-&cpu_thermal {
- trips {
- cpu_warm: cpu_warm {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- cpu_hot: cpu_hot {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
- };
- };
-
- cooling-maps {
- map2 {
- trip = <&cpu_warm>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
- };
-
- map3 {
- trip = <&cpu_hot>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&pcie0 {
- ep-gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- vpcie3v3-supply = <&vcc3v3_sys>;
-};
-
-&pinctrl {
- ir {
- ir_rx: ir-rx {
- /* external pullup to VCC3V3_SYS, despite being 1.8V :/ */
- rockchip,pins = <0 RK_PA6 1 &pcfg_pull_none>;
- };
- };
-};
-
-&sdhci {
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_host0>;
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_host0>;
-};
-
-&vcc5v0_sys {
- vin-supply = <&vcc12v0_sys>;
-};
-
-&vcc3v3_sys {
- vin-supply = <&vcc12v0_sys>;
-};
-
-&vbus_typec {
- enable-active-high;
- gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
- vin-supply = <&vcc5v0_sys>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPi M4 board device tree source
- *
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2019 Arm Ltd.
- */
-
-/dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
- model = "FriendlyElec NanoPi M4";
- compatible = "friendlyarm,nanopi-m4", "rockchip,rk3399";
-
- vdd_5v: vdd-5v {
- compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc5v0_core: vcc5v0-core {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_core";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_5v>;
- };
-
- vcc5v0_usb1: vcc5v0-usb1 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb1";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_usb2: vcc5v0-usb2 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb2";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_core>;
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_usb1>;
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_usb2>;
-};
-
-&vbus_typec {
- regulator-always-on;
- vin-supply = <&vdd_5v>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPi M4B board device tree source
- *
- * Copyright (c) 2020 Chen-Yu Tsai <wens@csie.org>
- */
-
-/dts-v1/;
-#include "rk3399-nanopi-m4.dts"
-
-/ {
- model = "FriendlyElec NanoPi M4B";
- compatible = "friendlyarm,nanopi-m4b", "rockchip,rk3399";
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1500000>;
- poll-interval = <100>;
-
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <18000>;
- };
- };
-};
-
-/* No USB type-C PD power manager */
-/delete-node/ &fusb0;
-
-&i2c4 {
- status = "disabled";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_usb2>;
-};
-
-&u2phy0_otg {
- phy-supply = <&vbus_typec>;
-};
-
-&u2phy1_otg {
- phy-supply = <&vcc5v0_usb1>;
-};
-
-&vbus_typec {
- enable-active-high;
- gpios = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (C) 2019 Amarula Solutions B.V.
- * Author: Jagan Teki <jagan@amarulasolutions.com>
- */
-
-/dts-v1/;
-
-#include "rk3399-nanopi4.dtsi"
-
-/ {
- model = "FriendlyARM NanoPi NEO4";
- compatible = "friendlyarm,nanopi-neo4", "rockchip,rk3399";
-
- vdd_5v: vdd-5v {
- compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc5v0_core: vcc5v0-core {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_core";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vdd_5v>;
- };
-
- vcc5v0_usb1: vcc5v0-usb1 {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb1";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_core>;
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_usb1>;
-};
-
-&vbus_typec {
- regulator-always-on;
- vin-supply = <&vdd_5v>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * FriendlyElec NanoPC-T4 board device tree source
- *
- * Copyright (c) 2020 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- *
- * Copyright (c) 2020 Jensen Huang <jensenhuang@friendlyarm.com>
- * Copyright (c) 2020 Marty Jones <mj8263788@gmail.com>
- * Copyright (c) 2021 Tianling Shen <cnsztl@gmail.com>
- */
-
-/dts-v1/;
-#include "rk3399-nanopi4.dtsi"
-
-/ {
- model = "FriendlyElec NanoPi R4S";
- compatible = "friendlyarm,nanopi-r4s", "rockchip,rk3399";
-
- /delete-node/ display-subsystem;
-
- gpio-leds {
- pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
-
- /delete-node/ led-0;
-
- lan_led: led-lan {
- gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
- label = "green:lan";
- };
-
- sys_led: led-sys {
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- label = "red:power";
- default-state = "on";
- };
-
- wan_led: led-wan {
- gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- label = "green:wan";
- };
- };
-
- gpio-keys {
- pinctrl-0 = <&reset_button_pin>;
-
- /delete-node/ key-power;
-
- key-reset {
- debounce-interval = <50>;
- gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
- label = "reset";
- linux,code = <KEY_RESTART>;
- };
- };
-
- vdd_5v: vdd-5v {
- compatible = "regulator-fixed";
- regulator-name = "vdd_5v";
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&emmc_phy {
- status = "disabled";
-};
-
-&i2c4 {
- status = "disabled";
-};
-
-&pcie0 {
- max-link-speed = <1>;
- num-lanes = <1>;
- vpcie3v3-supply = <&vcc3v3_sys>;
-};
-
-&pinctrl {
- gpio-leds {
- /delete-node/ status-led-pin;
-
- lan_led_pin: lan-led-pin {
- rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- sys_led_pin: sys-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wan_led_pin: wan-led-pin {
- rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- rockchip-key {
- /delete-node/ power-key;
-
- reset_button_pin: reset-button-pin {
- rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&sdhci {
- status = "disabled";
-};
-
-&sdio0 {
- status = "disabled";
-};
-
-&u2phy0_host {
- phy-supply = <&vdd_5v>;
-};
-
-&u2phy1_host {
- status = "disabled";
-};
-
-&uart0 {
- status = "disabled";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "host";
-};
-
-&vcc3v3_sys {
- vin-supply = <&vcc5v0_sys>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * RK3399-based FriendlyElec boards device tree source
- *
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- *
- * Copyright (c) 2018 FriendlyElec Computer Tech. Co., Ltd.
- * (http://www.friendlyarm.com)
- *
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2019 Arm Ltd.
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc3v3_sys";
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-name = "vcc5v0_sys";
- vin-supply = <&vdd_5v>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8_s3";
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v0_sd: vcc3v0-sd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_pwr_h>;
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc3v0_sd";
- vin-supply = <&vcc3v3_sys>;
- };
-
- /*
- * Really, this is supplied by vcc_1v8, and vcc1v8_s3 only
- * drives the enable pin, but we can't quite model that.
- */
- vcca0v9_s3: vcca0v9-s3 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vcca0v9_s3";
- vin-supply = <&vcc1v8_s3>;
- };
-
- /* As above, actually supplied by vcc3v3_sys */
- vcca1v8_s3: vcca1v8-s3 {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcca1v8_s3";
- vin-supply = <&vcc1v8_s3>;
- };
-
- vbus_typec: vbus-typec {
- compatible = "regulator-fixed";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-name = "vbus_typec";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&power_key>;
-
- key-power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- leds: gpio-leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&status_led_pin>;
-
- status_led: led-0 {
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- label = "status_led";
- linux,default-trigger = "heartbeat";
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_reg_on_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&emmc_phy {
- rockchip,enable-strobe-pulldown;
- status = "okay";
-};
-
-&gmac {
- assigned-clock-parents = <&clkin_gmac>;
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- clock_in_out = "input";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
- phy-handle = <&rtl8211e>;
- phy-mode = "rgmii";
- phy-supply = <&vcc3v3_s3>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtl8211e: ethernet-phy@1 {
- reg = <1>;
- interrupt-parent = <&gpio3>;
- interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
- reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c7>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <160>;
- i2c-scl-falling-time-ns = <30>;
- status = "okay";
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&cpu_b_sleep>;
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vdd_cpu_b";
- regulator-ramp-delay = <1000>;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpu_sleep>;
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vdd_gpu";
- regulator-ramp-delay = <1000>;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- clock-output-names = "xin32k", "rtc_clko_wifi";
- #clock-cells = <1>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>, <&ap_pwroff>, <&clk_32k>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_3v0>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_center";
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-name = "vdd_cpu_l";
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_cam: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8_cam";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v0_touch: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc3v0_touch";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmupll: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc1v8_pmupll";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_sdio";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcca3v0_codec";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vcc_1v5";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcca1v8_codec";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc_3v0";
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc3v3_s3";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc3v3_s0";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <200000>;
- i2c-scl-rising-time-ns = <150>;
- i2c-scl-falling-time-ns = <30>;
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c4 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <160>;
- i2c-scl-falling-time-ns = <30>;
- status = "okay";
-
- fusb0: typec-portc@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vbus_typec>;
- };
-};
-
-&i2c7 {
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- bt656-supply = <&vcc_1v8>;
- audio-supply = <&vcca1v8_codec>;
- sdmmc-supply = <&vcc_sdio>;
- gpio1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pcie_phy {
- assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>;
- assigned-clock-rates = <100000000>;
- assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
- status = "okay";
-};
-
-&pcie0 {
- num-lanes = <2>;
- vpcie0v9-supply = <&vcca0v9_s3>;
- vpcie1v8-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&pinctrl {
- fusb30x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- gpio-leds {
- status_led_pin: status-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- gmac {
- phy_intb: phy-intb {
- rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- phy_rstb: phy-rstb {
- rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- cpu_b_sleep: cpu-b-sleep {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- gpu_sleep: gpu-sleep {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- rockchip-key {
- power_key: power-key {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sdio {
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_reg_on_h: bt-reg-on-h {
- /* external pullup to VCC1V8_PMUPLL */
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wifi_reg_on_h: wifi-reg_on-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc0_det_l: sdmmc0-det-l {
- rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- sdmmc0_pwr_h: sdmmc0-pwr-h {
- rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&pwm2 {
- pinctrl-names = "active";
- pinctrl-0 = <&pwm2_pin_pull_down>;
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-mmc-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_bus4 &sdmmc_clk &sdmmc_cmd &sdmmc0_det_l>;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc3v0_sd>;
- vqmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy0_host {
- status = "okay";
-};
-
-&u2phy0_otg {
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy1_host {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_rts &uart0_cts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- max-speed = <4000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_reg_on_h &bt_host_wake_l &bt_wake_l>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- dr_mode = "host";
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/ {
- cluster0_opp: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <800000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <825000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <850000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <900000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <975000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1100000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt = <1150000>;
- };
- };
-
- cluster1_opp: opp-table-1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <800000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <800000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <825000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <850000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <900000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <975000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1050000>;
- };
- opp07 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1150000>;
- };
- opp08 {
- opp-hz = /bits/ 64 <2016000000>;
- opp-microvolt = <1250000>;
- };
- };
-
- gpu_opp_table: opp-table-2 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <800000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <297000000>;
- opp-microvolt = <800000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <825000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <850000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <925000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <1075000>;
- };
- };
-
- dmc_opp_table: opp-table-3 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <900000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <666000000>;
- opp-microvolt = <900000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <900000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <928000000>;
- opp-microvolt = <925000>;
- };
- };
-};
-
-&cpu_l0 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l1 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l2 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l3 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_b0 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&cpu_b1 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&dmc {
- operating-points-v2 = <&dmc_opp_table>;
-};
-
-&gpu {
- operating-points-v2 = <&gpu_opp_table>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-/ {
- cluster0_opp: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <825000 825000 1250000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <825000 825000 1250000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <850000 850000 1250000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <925000 925000 1250000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1000000 1000000 1250000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1125000 1125000 1250000>;
- };
- };
-
- cluster1_opp: opp-table-1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <825000 825000 1250000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <825000 825000 1250000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <825000 825000 1250000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <875000 875000 1250000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <950000 950000 1250000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1025000 1025000 1250000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1608000000>;
- opp-microvolt = <1100000 1100000 1250000>;
- };
- opp07 {
- opp-hz = /bits/ 64 <1800000000>;
- opp-microvolt = <1200000 1200000 1250000>;
- };
- };
-
- gpu_opp_table: opp-table-2 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <825000 825000 1150000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <297000000>;
- opp-microvolt = <825000 825000 1150000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <825000 825000 1150000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <500000000>;
- opp-microvolt = <875000 875000 1150000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <925000 925000 1150000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <800000000>;
- opp-microvolt = <1100000 1100000 1150000>;
- };
- };
-};
-
-&cpu_l0 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l1 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l2 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l3 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_b0 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&cpu_b1 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&gpu {
- operating-points-v2 = <&gpu_opp_table>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- */
-
-/dts-v1/;
-
-#include "dt-bindings/pwm/pwm.h"
-#include "dt-bindings/input/input.h"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include "dt-bindings/usb/pd.h"
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Orange Pi RK3399 Board";
- compatible = "rockchip,rk3399-orangepi", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1800000>;
- poll-interval = <100>;
-
- button-up {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- press-threshold-microvolt = <100000>;
- };
-
- button-down {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- press-threshold-microvolt = <300000>;
- };
-
- button-back {
- label = "Back";
- linux,code = <KEY_BACK>;
- press-threshold-microvolt = <985000>;
- };
-
- button-menu {
- label = "Menu";
- linux,code = <KEY_MENU>;
- press-threshold-microvolt = <1314000>;
- };
- };
-
- dc_12v: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- keys: gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
-
- key-power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Power";
- linux,code = <KEY_POWER>;
- linux,input-type = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_btn>;
- wakeup-source;
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_reg_on_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v0_sd: vcc3v0-sd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_pwr_h>;
- regulator-boot-on;
- regulator-max-microvolt = <3000000>;
- regulator-min-microvolt = <3000000>;
- regulator-name = "vcc3v0_sd";
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vbus_typec: vbus-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec_en>;
- regulator-name = "vbus_typec";
- vin-supply = <&vcc_sys>;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vcc_sys>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc3v3_s3>;
- phy-mode = "rgmii";
- phy-handle = <&rtl8211e>;
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>, <&phy_intb>, <&phy_rstb>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-
- mdio {
- compatible = "snps,dwmac-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
-
- rtl8211e: ethernet-phy@1 {
- reg = <1>;
- interrupt-parent = <&gpio3>;
- interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
- reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
- reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- };
- };
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "rtc_clko_soc", "rtc_clko_wifi";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_3v0>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <700000>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3400000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v0_tp: LDO_REG2 {
- regulator-name = "vcc3v0_tp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3400000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmupll: LDO_REG3 {
- regulator-name = "vcc1v8_pmupll";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3400000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3400000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <2500000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3400000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&cpu_b_sleep>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&gpu_sleep>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-
- ak09911@c {
- compatible = "asahi-kasei,ak09911";
- reg = <0x0c>;
- vdd-supply = <&vcc3v3_s3>;
- vid-supply = <&vcc3v3_s3>;
- };
-
- mpu6500@68 {
- compatible = "invensense,mpu6500";
- reg = <0x68>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PC6 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&gsensor_int_l>;
- vddio-supply = <&vcc3v3_s3>;
- };
-
- lsm6ds3@6a {
- compatible = "st,lsm6ds3";
- reg = <0x6a>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&gyr_int_l>;
- vdd-supply = <&vcc3v3_s3>;
- vddio-supply = <&vcc3v3_s3>;
- };
-
- cm32181@10 {
- compatible = "capella,cm32181";
- reg = <0x10>;
- interrupt-parent = <&gpio4>;
- interrupts = <RK_PD0 IRQ_TYPE_EDGE_RISING>;
- pinctrl-names = "default";
- pinctrl-0 = <&light_int_l>;
- vdd-supply = <&vcc3v3_s3>;
- };
-
- fusb302@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&chg_cc_int_l>;
- vbus-supply = <&vbus_typec>;
-
- typec_con: connector {
- compatible = "usb-c-connector";
- data-role = "host";
- label = "USB-C";
- op-sink-microwatt = <1000000>;
- power-role = "dual";
- sink-pdos =
- <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
- source-pdos =
- <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
- try-power-role = "sink";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- typec_hs: endpoint {
- remote-endpoint = <&u2phy0_typec_hs>;
- };
- };
- port@1 {
- reg = <1>;
- typec_ss: endpoint {
- remote-endpoint = <&tcphy0_typec_ss>;
- };
- };
- port@2 {
- reg = <2>;
- typec_dp: endpoint {
- remote-endpoint = <&tcphy0_typec_dp>;
- };
- };
- };
- };
- };
-};
-
-&io_domains {
- status = "okay";
- bt656-supply = <&vcc_3v0>;
- audio-supply = <&vcca1v8_codec>;
- sdmmc-supply = <&vcc_sdio>;
- gpio1830-supply = <&vcc_3v0>;
-};
-
-&pmu_io_domains {
- status = "okay";
- pmu1830-supply = <&vcc_3v0>;
-};
-
-&pinctrl {
- buttons {
- pwr_btn: pwr-btn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- gmac {
- phy_intb: phy-intb {
- rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- phy_rstb: phy-rstb {
- rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- cpu_b_sleep: cpu-b-sleep {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- gpu_sleep: gpu-sleep {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- sd {
- sdmmc0_pwr_h: sdmmc0-pwr-h {
- rockchip,pins =
- <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins =
- <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- vcc5v0_typec_en: vcc5v0-typec-en {
- rockchip,pins =
- <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdio-pwrseq {
- wifi_reg_on_h: wifi-reg-on-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- bluetooth {
- bt_reg_on_h: bt-enable-h {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- mpu6500 {
- gsensor_int_l: gsensor-int-l {
- rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lsm6ds3 {
- gyr_int_l: gyr-int-l {
- rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- cm32181 {
- light_int_l: light-int-l {
- rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- fusb302 {
- chg_cc_int_l: chg-cc-int-l {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- clock-frequency = <50000000>;
- disable-wp;
- keep-power-in-suspend;
- max-frequency = <50000000>;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- clock-frequency = <150000000>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc3v0_sd>;
- vqmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy0_dp {
- port {
- tcphy0_typec_dp: endpoint {
- remote-endpoint = <&typec_dp>;
- };
- };
-};
-
-&tcphy0_usb3 {
- port {
- tcphy0_typec_ss: endpoint {
- remote-endpoint = <&typec_ss>;
- };
- };
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- phy-supply = <&vbus_typec>;
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-
- port {
- u2phy0_typec_hs: endpoint {
- remote-endpoint = <&typec_hs>;
- };
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_reg_on_h>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2020 Tobias Schramm <t.schramm@manjaro.org>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include <dt-bindings/usb/pd.h>
-#include <dt-bindings/leds/common.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Pine64 Pinebook Pro";
- compatible = "pine64,pinebook-pro", "rockchip,rk3399";
- chassis-type = "laptop";
-
- aliases {
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- backlight: edp-backlight {
- compatible = "pwm-backlight";
- power-supply = <&vcc_12v>;
- pwms = <&pwm0 0 740740 0>;
- };
-
- bat: battery {
- compatible = "simple-battery";
- charge-full-design-microamp-hours = <9800000>;
- voltage-max-design-microvolt = <4350000>;
- voltage-min-design-microvolt = <3000000>;
- };
-
- edp_panel: edp-panel {
- compatible = "boe,nv140fhmn49";
- backlight = <&backlight>;
- enable-gpios = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&panel_en_pin>;
- power-supply = <&vcc3v3_panel>;
-
- port {
- panel_in_edp: endpoint {
- remote-endpoint = <&edp_out_panel>;
- };
- };
- };
-
- /*
- * Use separate nodes for gpio-keys to allow for selective deactivation
- * of wakeup sources via sysfs without disabling the whole key
- */
- gpio-key-lid {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&lidbtn_pin>;
-
- switch-lid {
- debounce-interval = <20>;
- gpios = <&gpio1 RK_PA1 GPIO_ACTIVE_LOW>;
- label = "Lid";
- linux,code = <SW_LID>;
- linux,input-type = <EV_SW>;
- wakeup-event-action = <EV_ACT_DEASSERTED>;
- wakeup-source;
- };
- };
-
- gpio-key-power {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn_pin>;
-
- key-power {
- debounce-interval = <20>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_led_pin &slp_led_pin>;
-
- green_led: led-0 {
- color = <LED_COLOR_ID_GREEN>;
- default-state = "on";
- function = LED_FUNCTION_POWER;
- gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
- label = "green:power";
- };
-
- red_led: led-1 {
- color = <LED_COLOR_ID_RED>;
- default-state = "off";
- function = LED_FUNCTION_STANDBY;
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- label = "red:standby";
- panic-indicator;
- retain-state-suspended;
- };
- };
-
- /* Power sequence for SDIO WiFi module */
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h_pin>;
- post-power-on-delay-ms = <100>;
- power-off-delay-us = <500000>;
-
- /* WL_REG_ON on module */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- /* Audio components */
- es8316-sound {
- compatible = "simple-audio-card";
- pinctrl-names = "default";
- pinctrl-0 = <&hp_det_pin>;
- simple-audio-card,name = "rockchip,es8316-codec";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
-
- simple-audio-card,widgets =
- "Microphone", "Mic Jack",
- "Headphone", "Headphones",
- "Speaker", "Speaker";
- simple-audio-card,routing =
- "MIC1", "Mic Jack",
- "Headphones", "HPOL",
- "Headphones", "HPOR",
- "Speaker Amplifier INL", "HPOL",
- "Speaker Amplifier INR", "HPOR",
- "Speaker", "Speaker Amplifier OUTL",
- "Speaker", "Speaker Amplifier OUTR";
-
- simple-audio-card,hp-det-gpio = <&gpio0 RK_PB0 GPIO_ACTIVE_HIGH>;
- simple-audio-card,aux-devs = <&speaker_amp>;
- simple-audio-card,pin-switches = "Speaker";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s1>;
- };
-
- simple-audio-card,codec {
- sound-dai = <&es8316>;
- };
- };
-
- speaker_amp: speaker-amplifier {
- compatible = "simple-audio-amplifier";
- enable-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
- sound-name-prefix = "Speaker Amplifier";
- VCC-supply = <&pa_5v>;
- };
-
- /* Power tree */
- /* Root power source */
- vcc_sysin: vcc-sysin {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sysin";
- regulator-always-on;
- regulator-boot-on;
- };
-
- /* Regulators supplied by vcc_sysin */
- /* LCD backlight supply */
- vcc_12v: vcc-12v {
- compatible = "regulator-fixed";
- regulator-name = "vcc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- vin-supply = <&vcc_sysin>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /* Main 3.3 V supply */
- vcc3v3_sys: wifi_bat: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sysin>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- /* 5 V USB power supply */
- vcc5v0_usb: pa_5v: vcc5v0-usb-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_5v_pin>;
- regulator-name = "vcc5v0_usb";
- regulator-always-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_sysin>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /* RK3399 logic supply */
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vcc_sysin>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- /* Regulators supplied by vcc3v3_sys */
- /* 0.9 V supply, always on */
- vcc_0v9: vcc-0v9 {
- compatible = "regulator-fixed";
- regulator-name = "vcc_0v9";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- /* S3 1.8 V supply, switched by vcc1v8_s3 */
- vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcca1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- /* micro SD card power */
- vcc3v0_sd: vcc3v0-sd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_pwr_h_pin>;
- regulator-name = "vcc3v0_sd";
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /* LCD panel power, called VCC3V3_S0 in schematic */
- vcc3v3_panel: vcc3v3-panel {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&lcdvcc_en_pin>;
- regulator-name = "vcc3v3_panel";
- regulator-always-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-enable-ramp-delay = <100000>;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /* M.2 adapter power, switched by vcc1v8_s3 */
- vcc3v3_ssd: vcc3v3-ssd {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_ssd";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- /* Regulators supplied by vcc5v0_usb */
- /* USB 3 port power supply regulator */
- vcc5v0_otg: vcc5v0-otg {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en_pin>;
- regulator-name = "vcc5v0_otg";
- regulator-always-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_usb>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /* Regulators supplied by vcc5v0_usb */
- /* Type C port power supply regulator */
- vbus_5vout: vbus_typec: vbus-5vout {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec0_en_pin>;
- regulator-name = "vbus_5vout";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc5v0_usb>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /* Regulators supplied by vcc_1v8 */
- /* Primary 0.9 V LDO */
- vcca0v9_s3: vcca0v9-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc0v9_s3";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_1v8>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- mains_charger: dc-charger {
- compatible = "gpio-charger";
- charger-type = "mains";
- gpios = <&gpio4 RK_PD0 GPIO_ACTIVE_LOW>;
-
- /* Also triggered by USB charger */
- pinctrl-names = "default";
- pinctrl-0 = <&dc_det_pin>;
- };
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&edp {
- force-hpd;
- pinctrl-names = "default";
- pinctrl-0 = <&edp_hpd>;
- status = "okay";
-
- ports {
- edp_out: port@1 {
- reg = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_out_panel: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&panel_in_edp>;
- };
- };
- };
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <4>;
- i2c-scl-rising-time-ns = <168>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- interrupt-parent = <&gpio3>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l_pin>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sysin>;
- vcc2-supply = <&vcc_sysin>;
- vcc3-supply = <&vcc_sysin>;
- vcc4-supply = <&vcc_sysin>;
- vcc6-supply = <&vcc_sysin>;
- vcc7-supply = <&vcc_sysin>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc_sysin>;
- vcc10-supply = <&vcc_sysin>;
- vcc11-supply = <&vcc_sysin>;
- vcc12-supply = <&vcc3v3_sys>;
-
- regulators {
- /* rk3399 center logic supply */
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: vcc_wl: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- /* not used */
- LDO_REG1 {
- };
-
- /* not used */
- LDO_REG2 {
- };
-
- vcc1v8_pmupll: LDO_REG3 {
- regulator-name = "vcc1v8_pmupll";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_pin>;
- regulator-name = "vdd_cpu_b";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- vin-supply = <&vcc_1v8>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_pin>;
- regulator-name = "vdd_gpu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- vin-supply = <&vcc_1v8>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- clock-frequency = <100000>;
- i2c-scl-falling-time-ns = <4>;
- i2c-scl-rising-time-ns = <168>;
- status = "okay";
-
- es8316: audio-codec@11 {
- compatible = "everest,es8316";
- reg = <0x11>;
- clocks = <&cru SCLK_I2S_8CH_OUT>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
- };
-};
-
-&i2c3 {
- i2c-scl-falling-time-ns = <15>;
- i2c-scl-rising-time-ns = <450>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-falling-time-ns = <20>;
- i2c-scl-rising-time-ns = <600>;
- status = "okay";
-
- fusb0: fusb30x@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int_pin>;
- vbus-supply = <&vbus_typec>;
-
- connector {
- compatible = "usb-c-connector";
- data-role = "dual";
- label = "USB-C";
- op-sink-microwatt = <1000000>;
- power-role = "dual";
- sink-pdos =
- <PDO_FIXED(5000, 2500, PDO_FIXED_USB_COMM)>;
- source-pdos =
- <PDO_FIXED(5000, 1400, PDO_FIXED_USB_COMM)>;
- try-power-role = "sink";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- usbc_hs: endpoint {
- remote-endpoint =
- <&u2phy0_typec_hs>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- usbc_ss: endpoint {
- remote-endpoint =
- <&tcphy0_typec_ss>;
- };
- };
-
- port@2 {
- reg = <2>;
-
- usbc_dp: endpoint {
- remote-endpoint =
- <&tcphy0_typec_dp>;
- };
- };
- };
- };
- };
-
- cw2015@62 {
- compatible = "cellwise,cw2015";
- reg = <0x62>;
- cellwise,battery-profile = /bits/ 8 <
- 0x17 0x67 0x80 0x73 0x6E 0x6C 0x6B 0x63
- 0x77 0x51 0x5C 0x58 0x50 0x4C 0x48 0x36
- 0x15 0x0C 0x0C 0x19 0x5B 0x7D 0x6F 0x69
- 0x69 0x5B 0x0C 0x29 0x20 0x40 0x52 0x59
- 0x57 0x56 0x54 0x4F 0x3B 0x1F 0x7F 0x17
- 0x06 0x1A 0x30 0x5A 0x85 0x93 0x96 0x2D
- 0x48 0x77 0x9C 0xB3 0x80 0x52 0x94 0xCB
- 0x2F 0x00 0x64 0xA5 0xB5 0x11 0xF0 0x11
- >;
- cellwise,monitor-interval-ms = <5000>;
- monitored-battery = <&bat>;
- power-supplies = <&mains_charger>, <&fusb0>;
- };
-};
-
-&i2s1 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2s_8ch_mclk_pin>, <&i2s1_2ch_bus>;
- rockchip,capture-channels = <8>;
- rockchip,playback-channels = <8>;
- status = "okay";
-};
-
-&io_domains {
- audio-supply = <&vcc_3v0>;
- gpio1830-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- bus-scan-delay-ms = <1000>;
- ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- vpcie0v9-supply = <&vcca0v9_s3>;
- vpcie1v8-supply = <&vcca1v8_s3>;
- vpcie3v3-supply = <&vcc3v3_ssd>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- pwrbtn_pin: pwrbtn-pin {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- lidbtn_pin: lidbtn-pin {
- rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- dc-charger {
- dc_det_pin: dc-det-pin {
- rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- es8316 {
- hp_det_pin: hp-det-pin {
- rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- fusb302x {
- fusb0_int_pin: fusb0-int-pin {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- i2s1 {
- i2s_8ch_mclk_pin: i2s-8ch-mclk-pin {
- rockchip,pins = <4 RK_PA0 1 &pcfg_pull_none>;
- };
- };
-
- lcd-panel {
- lcdvcc_en_pin: lcdvcc-en-pin {
- rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- panel_en_pin: panel-en-pin {
- rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- lcd_panel_reset_pin: lcd-panel-reset-pin {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- pwr_led_pin: pwr-led-pin {
- rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- slp_led_pin: slp-led-pin {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l_pin: pmic-int-l-pin {
- rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdcard {
- sdmmc0_pwr_h_pin: sdmmc0-pwr-h-pin {
- rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- };
-
- sdio-pwrseq {
- wifi_enable_h_pin: wifi-enable-h-pin {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb-typec {
- vcc5v0_typec0_en_pin: vcc5v0-typec0-en-pin {
- rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- pwr_5v_pin: pwr-5v-pin {
- rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- vcc5v0_host_en_pin: vcc5v0-host-en-pin {
- rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wireless-bluetooth {
- bt_wake_pin: bt-wake-pin {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_pin: bt-host-wake-pin {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_reset_pin: bt-reset-pin {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- sd-uhs-sdr50;
- vmmc-supply = <&vcc3v0_sd>;
- vqmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&spi1 {
- max-freq = <10000000>;
- status = "okay";
-
- spiflash: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- m25p,fast-read;
- spi-max-frequency = <10000000>;
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy0_dp {
- port {
- tcphy0_typec_dp: endpoint {
- remote-endpoint = <&usbc_dp>;
- };
- };
-};
-
-&tcphy0_usb3 {
- port {
- tcphy0_typec_ss: endpoint {
- remote-endpoint = <&usbc_ss>;
- };
- };
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_otg>;
- status = "okay";
- };
-
- port {
- u2phy0_typec_hs: endpoint {
- remote-endpoint = <&usbc_hs>;
- };
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_otg>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4345c5";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- max-speed = <1500000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- vbat-supply = <&wifi_bat>;
- vddio-supply = <&vcc_wl>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "host";
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- dr_mode = "host";
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2020 Martijn Braam <martijn@brixit.nl>
- * Copyright (c) 2021 Kamil Trzciński <ayufan@ayufan.eu>
- */
-
-/*
- * PinePhone Pro datasheet:
- * https://files.pine64.org/doc/PinePhonePro/PinephonePro-Schematic-V1.0-20211127.pdf
- */
-
-/dts-v1/;
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/linux-event-codes.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Pine64 PinePhonePro";
- compatible = "pine64,pinephone-pro", "rockchip,rk3399";
- chassis-type = "handset";
-
- aliases {
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:115200n8";
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1600000>;
- poll-interval = <100>;
-
- button-up {
- label = "Volume Up";
- linux,code = <KEY_VOLUMEUP>;
- press-threshold-microvolt = <100000>;
- };
-
- button-down {
- label = "Volume Down";
- linux,code = <KEY_VOLUMEDOWN>;
- press-threshold-microvolt = <600000>;
- };
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 50000 0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn_pin>;
-
- key-power {
- debounce-interval = <20>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- vcc_sys: vcc-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_sys";
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc3v3_sys: vcc3v3-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_sys>;
- };
-
- vcca1v8_s3: vcc1v8-s3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcca1v8_s3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc3v3_sys>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc1v8_codec: vcc1v8-codec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc1v8_codec_en>;
- regulator-name = "vcc1v8_codec";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- wifi_pwrseq: sdio-wifi-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk818 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h_pin>;
- /*
- * Wait between power-on and SDIO access for CYP43455
- * POR circuit.
- */
- post-power-on-delay-ms = <110>;
- /*
- * Wait between consecutive toggles for CYP43455 CBUCK
- * regulator discharge.
- */
- power-off-delay-us = <10000>;
-
- /* WL_REG_ON on module */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- /* MIPI DSI panel 1.8v supply */
- vcc1v8_lcd: vcc1v8-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- regulator-name = "vcc1v8_lcd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc3v3_sys>;
- gpio = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- };
-
- /* MIPI DSI panel 2.8v supply */
- vcc2v8_lcd: vcc2v8-lcd {
- compatible = "regulator-fixed";
- enable-active-high;
- regulator-name = "vcc2v8_lcd";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- vin-supply = <&vcc3v3_sys>;
- gpio = <&gpio3 RK_PA1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- };
-};
-
-&cpu_alert0 {
- temperature = <65000>;
-};
-&cpu_alert1 {
- temperature = <68000>;
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk818: pmic@1c {
- compatible = "rockchip,rk818";
- reg = <0x1c>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc_sys>;
- vcc2-supply = <&vcc_sys>;
- vcc3-supply = <&vcc_sys>;
- vcc4-supply = <&vcc_sys>;
- vcc6-supply = <&vcc_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc_sys>;
- vcc9-supply = <&vcc3v3_sys>;
-
- regulators {
- vdd_cpu_l: DCDC_REG1 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <875000>;
- regulator-max-microvolt = <975000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_center: DCDC_REG2 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1000000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcca3v0_codec: LDO_REG1 {
- regulator-name = "vcca3v0_codec";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vcc3v0_touch: LDO_REG2 {
- regulator-name = "vcc3v0_touch";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- vcca1v8_codec: LDO_REG3 {
- regulator-name = "vcca1v8_codec";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- rk818_pwr_on: LDO_REG4 {
- regulator-name = "rk818_pwr_on";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG5 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc1v8_dvp: LDO_REG7 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- vcc3v3_s3: LDO_REG8 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd: LDO_REG9 {
- regulator-name = "vccio_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- };
-
- vcc3v3_s0: SWITCH_REG {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_pin>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <875000>;
- regulator-max-microvolt = <1150000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_pin>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <875000>;
- regulator-max-microvolt = <975000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-
- touchscreen@14 {
- compatible = "goodix,gt1158";
- reg = <0x14>;
- interrupt-parent = <&gpio3>;
- interrupts = <RK_PB5 IRQ_TYPE_EDGE_RISING>;
- irq-gpios = <&gpio3 RK_PB5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_HIGH>;
- AVDD28-supply = <&vcc3v0_touch>;
- VDDIO-supply = <&vcc3v0_touch>;
- touchscreen-size-x = <720>;
- touchscreen-size-y = <1440>;
- };
-};
-
-&cluster0_opp {
- opp04 {
- status = "disabled";
- };
-
- opp05 {
- status = "disabled";
- };
-};
-
-&cluster1_opp {
- opp06 {
- opp-hz = /bits/ 64 <1500000000>;
- opp-microvolt = <1100000 1100000 1150000>;
- };
-
- opp07 {
- status = "disabled";
- };
-};
-
-&io_domains {
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcca1v8_codec>;
- sdmmc-supply = <&vccio_sd>;
- gpio1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&mipi_dsi {
- status = "okay";
- clock-master;
-
- ports {
- mipi_out: port@1 {
- #address-cells = <0>;
- #size-cells = <0>;
- reg = <1>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
- };
- };
- };
-
- panel@0 {
- compatible = "hannstar,hsd060bhw4";
- reg = <0>;
- backlight = <&backlight>;
- reset-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_LOW>;
- vcc-supply = <&vcc2v8_lcd>;
- iovcc-supply = <&vcc1v8_lcd>;
- pinctrl-names = "default";
-
- port {
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- pwrbtn_pin: pwrbtn-pin {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h_pin: wifi-enable-h-pin {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sound {
- vcc1v8_codec_en: vcc1v8-codec-en {
- rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- wireless-bluetooth {
- bt_wake_pin: bt-wake-pin {
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_pin: bt-host-wake-pin {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_reset_pin: bt-reset-pin {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- disable-wp;
- keep-power-in-suspend;
- mmc-pwrseq = <&wifi_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc3v3_sys>;
- vqmmc-supply = <&vccio_sd>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- uart-has-rtscts;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4345c5";
- clocks = <&rk818 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- max-speed = <1500000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_pin &bt_wake_pin &bt_reset_pin>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
- assigned-clocks = <&cru DCLK_VOP0_DIV>, <&cru DCLK_VOP0>,
- <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
- assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
- assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP0_DIV>;
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
- assigned-clocks = <&cru DCLK_VOP1_DIV>, <&cru DCLK_VOP1>,
- <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
- assigned-clock-rates = <0>, <0>, <400000000>, <100000000>;
- assigned-clock-parents = <&cru PLL_GPLL>, <&cru DCLK_VOP1_DIV>;
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-#include "rk3399-puma.dtsi"
-#include <dt-bindings/input/input.h>
-
-/ {
- model = "Theobroma Systems RK3399-Q7 SoM";
- compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
-
- aliases {
- mmc1 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&haikou_keys_pin>;
- pinctrl-names = "default";
-
- button-batlow-n {
- gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- label = "BATLOW#";
- linux,code = <KEY_BATTERY>;
- };
-
- button-slp-btn-n {
- gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
- label = "SLP_BTN#";
- linux,code = <KEY_SLEEP>;
- };
-
- button-wake-n {
- gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_LOW>;
- label = "WAKE#";
- linux,code = <KEY_WAKEUP>;
- wakeup-source;
- };
-
- switch-lid-btn-n {
- gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
- label = "LID_BTN#";
- linux,code = <SW_LID>;
- linux,input-type = <EV_SW>;
- };
- };
-
- leds {
- pinctrl-0 = <&module_led_pin>, <&sd_card_led_pin>;
-
- sd_card_led: led-1 {
- label = "sd_card_led";
- gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "mmc0";
- };
- };
-
- i2s0-sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,name = "Haikou,I2S-codec";
- simple-audio-card,mclk-fs = <512>;
-
- simple-audio-card,codec {
- clocks = <&sgtl5000_clk>;
- sound-dai = <&sgtl5000>;
- };
-
- simple-audio-card,cpu {
- bitclock-master;
- frame-master;
- sound-dai = <&i2s0>;
- };
- };
-
- sgtl5000_clk: sgtl5000-oscillator {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
-
- dc_12v: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "dc_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc3v3_baseboard: vcc3v3-baseboard {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_baseboard";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&dc_12v>;
- };
-
- vcc5v0_baseboard: vcc5v0-baseboard {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_baseboard";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&dc_12v>;
- };
-
- vcc5v0_otg: vcc5v0-otg-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&otg_vbus_drv>;
- regulator-name = "vcc5v0_otg";
- regulator-always-on;
- };
-
- vdda_codec: vdda-codec {
- compatible = "regulator-fixed";
- regulator-name = "vdda_codec";
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_baseboard>;
- };
-
- vddd_codec: vddd-codec {
- compatible = "regulator-fixed";
- regulator-name = "vddd_codec";
- regulator-boot-on;
- regulator-min-microvolt = <1600000>;
- regulator-max-microvolt = <1600000>;
- vin-supply = <&vcc5v0_baseboard>;
- };
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <400000>;
-};
-
-&i2c2 {
- status = "okay";
- clock-frequency = <400000>;
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
- clock-frequency = <400000>;
-
- sgtl5000: codec@a {
- compatible = "fsl,sgtl5000";
- reg = <0x0a>;
- clocks = <&sgtl5000_clk>;
- #sound-dai-cells = <0>;
- VDDA-supply = <&vdda_codec>;
- VDDIO-supply = <&vdda_codec>;
- VDDD-supply = <&vddd_codec>;
- status = "okay";
- };
-};
-
-&i2c6 {
- status = "okay";
- clock-frequency = <400000>;
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- haikou_keys_pin: haikou-keys-pin {
- rockchip,pins =
- /* LID_BTN */
- <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
- /* BATLOW# */
- <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
- /* SLP_BTN# */
- <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
- /* WAKE# */
- <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- sd_card_led_pin: sd-card-led-pin {
- rockchip,pins =
- <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb2 {
- otg_vbus_drv: otg-vbus-drv {
- rockchip,pins =
- <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <40000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- vmmc-supply = <&vcc3v3_baseboard>;
- status = "okay";
-};
-
-&spi5 {
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
- extcon = <&extcon_usb3>;
- status = "okay";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_otg>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdhci;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&module_led_pin>;
-
- module_led: led-0 {
- label = "module_led";
- gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- panic-indicator;
- };
- };
-
- extcon_usb3: extcon-usb3 {
- compatible = "linux,extcon-usb-gpio";
- id-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&usb3_id>;
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- vcc1v2_phy: vcc1v2-phy {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v2_phy";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vcc5v0_sys>;
- regulator-name = "vdd_log";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&emmc_phy {
- status = "okay";
- drive-impedance-ohm = <33>;
-};
-
-&gpio0 {
- /*
- * The BIOS_DISABLE hog is a feedback pin for the actual status of the
- * signal. This usually represents the state of a switch on the baseboard.
- * The pin has a 10k pull-up resistor connected, so no pull-up setting is needed.
- */
- bios-disable-hog {
- gpios = <RK_PB0 GPIO_ACTIVE_HIGH>;
- gpio-hog;
- input;
- line-name = "bios_disable";
- };
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc1v2_phy>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x10>;
- rx_delay = <0x10>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- clock-frequency = <400000>;
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc1v8_pmu>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_ldo1: LDO_REG1 {
- regulator-name = "vcc_ldo1";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_hdmi: LDO_REG2 {
- regulator-name = "vcc1v8_hdmi";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmu: LDO_REG3 {
- regulator-name = "vcc1v8_pmu";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_ldo5: LDO_REG5 {
- regulator-name = "vcc_ldo5";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ldo6: LDO_REG6 {
- regulator-name = "vcc_ldo6";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc0v9_hdmi: LDO_REG7 {
- regulator-name = "vcc0v9_hdmi";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_efuse: LDO_REG8 {
- regulator-name = "vcc_efuse";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_gpu: regulator@60 {
- compatible = "fcs,fan53555";
- reg = <0x60>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1230000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&i2c7 {
- status = "okay";
- clock-frequency = <400000>;
-
- fan: fan@18 {
- compatible = "ti,amc6821";
- reg = <0x18>;
- #cooling-cells = <2>;
- };
-
- rtc_twi: rtc@6f {
- compatible = "isil,isl1208";
- reg = <0x6f>;
- };
-};
-
-&i2c8 {
- status = "okay";
- clock-frequency = <400000>;
-
- vdd_cpu_b: regulator@60 {
- compatible = "fcs,fan53555";
- reg = <0x60>;
- vin-supply = <&vcc5v0_sys>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <600000>;
- regulator-max-microvolt = <1230000>;
- regulator-ramp-delay = <1000>;
- fcs,suspend-voltage-selector = <1>;
- regulator-always-on;
- regulator-boot-on;
- };
-};
-
-&i2s0 {
- pinctrl-0 = <&i2s0_2ch_bus>;
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-/*
- * As Q7 does not specify neither a global nor a RX clock for I2S these
- * signals are not used. Furthermore I2S0_LRCK_RX is used as GPIO.
- * Therefore we have to redefine the i2s0_2ch_bus definition to prevent
- * conflicts.
- */
-&i2s0_2ch_bus {
- rockchip,pins =
- <3 RK_PD0 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>;
-};
-
-&io_domains {
- status = "okay";
- bt656-supply = <&vcc_1v8>;
- audio-supply = <&vcc_1v8>;
- sdmmc-supply = <&vcc_sd>;
- gpio1830-supply = <&vcc_1v8>;
-};
-
-&pmu_io_domains {
- status = "okay";
- pmu1830-supply = <&vcc_1v8>;
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&pinctrl {
- i2c8 {
- i2c8_xfer_a: i2c8-xfer {
- rockchip,pins =
- <1 RK_PC4 1 &pcfg_pull_up>,
- <1 RK_PC5 1 &pcfg_pull_up>;
- };
- };
-
- leds {
- module_led_pin: module-led-pin {
- rockchip,pins =
- <2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins =
- <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb3 {
- usb3_id: usb3-id {
- rockchip,pins =
- <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdhci {
- /*
- * Signal integrity isn't great at 200MHz but 100MHz has proven stable
- * enough.
- */
- max-frequency = <100000000>;
-
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- vqmmc-supply = <&vcc_sd>;
-};
-
-&spi1 {
- status = "okay";
-
- norflash: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <50000000>;
- };
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
- * Copyright (c) 2019 Markus Reichl <m.reichl@fivetechno.de>
- */
-
-/dts-v1/;
-#include "rk3399-roc-pc.dtsi"
-
-/ {
- model = "Firefly ROC-RK3399-PC Mezzanine Board";
- compatible = "firefly,roc-rk3399-pc-mezzanine", "rockchip,rk3399";
-
- aliases {
- mmc2 = &sdio0;
- };
-
- /* MP8009 PoE PD */
- poe_12v: poe-12v {
- compatible = "regulator-fixed";
- regulator-name = "poe_12v";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc3v3_ngff: vcc3v3-ngff {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_ngff";
- enable-active-high;
- gpio = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc3v3_ngff_en>;
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&sys_12v>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_pcie";
- enable-active-high;
- gpio = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc3v3_pcie_en>;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&sys_12v>;
- };
-};
-
-&sys_12v {
- vin-supply = <&poe_12v>;
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_perst>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- vpcie1v8-supply = <&vcc1v8_pmu>;
- vpcie0v9-supply = <&vcca_0v9>;
- status = "okay";
-};
-
-&pinctrl {
- ngff {
- vcc3v3_ngff_en: vcc3v3-ngff-en {
- rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- vcc3v3_pcie_en: vcc3v3-pcie-en {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_perst: pcie-perst {
- rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc3v3_ngff>;
- vqmmc-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
- */
-
-/dts-v1/;
-#include "rk3399-roc-pc.dtsi"
-
-/ {
- model = "Firefly ROC-RK3399-PC Board";
- compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 T-Chip Intelligent Technology Co., Ltd
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Firefly ROC-RK3399-PC Board";
- compatible = "firefly,roc-rk3399-pc", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdmmc;
- mmc1 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- backlight: backlight {
- compatible = "pwm-backlight";
- pwms = <&pwm0 0 25000 0>;
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- adc-keys {
- compatible = "adc-keys";
- io-channels = <&saradc 1>;
- io-channel-names = "buttons";
- keyup-threshold-microvolt = <1500000>;
- poll-interval = <100>;
-
- button-recovery {
- label = "Recovery";
- linux,code = <KEY_VENDOR>;
- press-threshold-microvolt = <18000>;
- };
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwr_key_l>;
-
- key-power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&ir_int>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&work_led_pin>, <&diy_led_pin>, <&yellow_led_pin>;
-
- work_led: led-0 {
- label = "green:work";
- gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- linux,default-trigger = "heartbeat";
- };
-
- diy_led: led-1 {
- label = "red:diy";
- gpios = <&gpio0 RK_PB5 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc2";
- };
-
- yellow_led: led-2 {
- label = "yellow:yellow-led";
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- linux,default-trigger = "mmc1";
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
-
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- vcc_vbus_typec0: vcc-vbus-typec0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc_vbus_typec0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- sys_12v: sys-12v {
- compatible = "regulator-fixed";
- regulator-name = "sys_12v";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&dc_12v>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- vcc3v0_sd: vcc3v0-sd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc3v0_sd_en>;
- regulator-name = "vcc3v0_sd";
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&sys_12v>;
- };
-
- vcca_0v9: vcca-0v9 {
- compatible = "regulator-fixed";
- regulator-name = "vcca_0v9";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en &hub_rst>;
- regulator-name = "vcc5v0_host";
- vin-supply = <&vcc_sys>;
- };
-
- vcc_vbus_typec1: vcc-vbus-typec1 {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PB5 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc_vbus_typec1_en>;
- regulator-name = "vcc_vbus_typec1";
- regulator-always-on;
- vin-supply = <&vcc_sys>;
- };
-
- vcc_sys: vcc-sys {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PA6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc_sys_en>;
- regulator-name = "vcc_sys";
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&sys_12v>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <450000>;
- regulator-max-microvolt = <1400000>;
- pwm-supply = <&vcc3v3_sys>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- avdd-0v9-supply = <&vcca0v9_hdmi>;
- avdd-1v8-supply = <&vcca1v8_hdmi>;
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc3v3_sys>;
- vcc2-supply = <&vcc3v3_sys>;
- vcc3-supply = <&vcc3v3_sys>;
- vcc4-supply = <&vcc3v3_sys>;
- vcc6-supply = <&vcc3v3_sys>;
- vcc7-supply = <&vcc3v3_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc3v3_sys>;
- vcc10-supply = <&vcc3v3_sys>;
- vcc11-supply = <&vcc3v3_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_3v0>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_codec: LDO_REG1 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca1v8_hdmi: LDO_REG2 {
- regulator-name = "vcca1v8_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc1v8_pmu: LDO_REG3 {
- regulator-name = "vcc1v8_pmu";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_pin>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_pin>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb1: usb-typec@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb1_int>;
- vbus-supply = <&vcc_vbus_typec1>;
- status = "okay";
- };
-};
-
-&i2c7 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb0: usb-typec@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vcc_vbus_typec0>;
- status = "okay";
- };
-
- mp8859: regulator@66 {
- compatible = "mps,mp8859";
- reg = <0x66>;
- dc_12v: mp8859_dcdc {
- regulator-name = "dc_12v";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc_vbus_typec0>;
-
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <12000000>;
- };
- };
- };
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- audio-supply = <&vcca1v8_codec>;
- bt656-supply = <&vcc_3v0>;
- gpio1830-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pinctrl {
- buttons {
- pwr_key_l: pwr-key-l {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- ir {
- ir_int: ir-int {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- lcd-panel {
- lcd_panel_reset: lcd-panel-reset {
- rockchip,pins = <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- diy_led_pin: diy-led-pin {
- rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- work_led_pin: work-led-pin {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- yellow_led_pin: yellow-led-pin {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- vcc3v0_sd_en: vcc3v0-sd-en {
- rockchip,pins = <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- vcc_sys_en: vcc-sys-en {
- rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- hub_rst: hub-rst {
- rockchip,pins = <2 RK_PA4 RK_FUNC_GPIO &pcfg_output_high>;
- };
- };
-
- usb-typec {
- vcc_vbus_typec1_en: vcc-vbus-typec1-en {
- rockchip,pins = <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- fusb30x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- fusb1_int: fusb1-int {
- rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- sd-uhs-sdr104;
- vmmc-supply = <&vcc3v0_sd>;
- vqmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- non-removable;
- status = "okay";
-};
-
-&spi1 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <30000000>;
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- phy-supply = <&vcc_vbus_typec0>;
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- phy-supply = <&vcc_vbus_typec1>;
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts>;
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2022 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include <dt-bindings/leds/common.h>
-#include "rk3399.dtsi"
-#include "rk3399-t-opp.dtsi"
-
-/ {
- model = "Radxa ROCK 4C+";
- compatible = "radxa,rock-4c-plus", "rockchip,rk3399";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdhci;
- mmc1 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&user_led1 &user_led2>;
-
- /* USER_LED1 */
- led-0 {
- function = LED_FUNCTION_POWER;
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&gpio3 RK_PD4 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "default-on";
- };
-
- /* USER_LED2 */
- led-1 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk809 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- vcc_3v3: vcc-3v3-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc_3v3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc3v3_phy1: vcc3v3-phy1-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_phy1";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc_3v3>;
- };
-
- vcc5v0_host1: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host1";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_host0_s0>;
- };
-
- vcc5v0_sys: vcc5v0-sys-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- };
-
- vcc5v0_typec: vcc5v0-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec0_en>;
- regulator-name = "vcc5v0_typec";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vdd_log: vdd-log-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <950000>;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc3v3_phy1>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x2a>;
- rx_delay = <0x21>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- avdd-0v9-supply = <&vcc_0v9_s0>;
- avdd-1v8-supply = <&vcc_1v8_s0>;
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- status = "okay";
- i2c-scl-falling-time-ns = <30>;
- i2c-scl-rising-time-ns = <180>;
- clock-frequency = <400000>;
-
- rk809: pmic@20 {
- compatible = "rockchip,rk809";
- reg = <0x20>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PC5 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc_buck5_s3>;
- vcc6-supply = <&vcc_buck5_s3>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vdd_center";
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vdd_cpu_l";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc_ddr";
- regulator-initial-mode = <0x2>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_sys: DCDC_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-initial-mode = <0x2>;
- regulator-name = "vcc3v3_sys";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_buck5_s3: DCDC_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_buck5_s3";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_0v9_s3: LDO_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vcc_0v9_s3";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v8_s3: LDO_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8_s3";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_0v9_s0: LDO_REG3 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-name = "vcc_0v9_s0";
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcc_1v8_s0: LDO_REG4 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-name = "vcc_1v8_s0";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_mipi: LDO_REG5 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc_mipi";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5_s0: LDO_REG6 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-name = "vcc_1v5_s0";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0_s0: LDO_REG7 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-name = "vcc_3v0_s0";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_sdio_s0: LDO_REG8 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_sdio_s0";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_cam: LDO_REG9 {
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-name = "vcc_cam";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc5v0_host0_s0: SWITCH_REG1 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "vcc5v0_host0_s0";
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- lcd_3v3: SWITCH_REG2 {
- regulator-always-on;
- regulator-boot-on;
- regulator-name = "lcd_3v3";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-compatible = "fan53555-reg";
- pinctrl-0 = <&vsel1_gpio>;
- vsel-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-compatible = "fan53555-reg";
- pinctrl-0 = <&vsel2_gpio>;
- vsel-gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_HIGH>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- regulator-initial-mode = <1>; /* 1:force PWM 2:auto */
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- audio-supply = <&vcc_1v8_s0>;
- bt656-supply = <&vcc_3v0_s0>;
- gpio1830-supply = <&vcc_3v0_s0>;
- sdmmc-supply = <&vcc_sdio_s0>;
- status = "okay";
-};
-
-&pinctrl {
- bt {
- bt_enable_h: bt-enable-h {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- leds {
- user_led1: user-led1 {
- rockchip,pins = <3 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led2: user-led2 {
- rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_gpio: vsel1-gpio {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_gpio: vsel2-gpio {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdmmc {
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins = <4 8 1 &pcfg_pull_up_8ma>,
- <4 9 1 &pcfg_pull_up_8ma>,
- <4 10 1 &pcfg_pull_up_8ma>,
- <4 11 1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins = <4 12 1 &pcfg_pull_none_18ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins = <4 13 1 &pcfg_pull_up_8ma>;
- };
- };
-
- usb-typec {
- vcc5v0_typec0_en: vcc5v0-typec-en {
- rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- wifi {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0_s0>;
- status = "okay";
-};
-
-&saradc {
- status = "okay";
- vref-supply = <&vcc_1v8_s3>;
-};
-
-&sdhci {
- max-frequency = <150000000>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&sdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- card-detect-delay = <800>;
- disable-wp;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- vqmmc-supply = <&vcc_sdio_s0>;
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host1>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host1>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4345c5";
- clocks = <&rk809 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- max-speed = <1500000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8_s3>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- extcon = <&u2phy0>;
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
- */
-
-/dts-v1/;
-#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-t-opp.dtsi"
-
-/ {
- model = "Radxa ROCK 4SE";
- compatible = "radxa,rock-4se", "rockchip,rk3399";
-
- aliases {
- mmc2 = &sdio0;
- };
-};
-
-&pinctrl {
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&sdio0 {
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&uart0 {
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4345c5";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- max-speed = <1500000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&vcc5v0_host {
- enable-active-high;
- gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
- */
-
-/dts-v1/;
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-
-/ {
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdhci;
- mmc1 = &sdmmc;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&user_led2>;
-
- /* USER_LED2 */
- led-0 {
- function = LED_FUNCTION_STATUS;
- color = <LED_COLOR_ID_BLUE>;
- gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
- linux,default-trigger = "heartbeat";
- };
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- sound: sound {
- compatible = "audio-graph-card";
- label = "Analog";
- dais = <&i2s0_p0>;
- };
-
- sound-dit {
- compatible = "audio-graph-card";
- label = "SPDIF";
- dais = <&spdif_p0>;
- };
-
- spdif-dit {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
-
- port {
- dit_p0_0: endpoint {
- remote-endpoint = <&spdif_p0_0>;
- };
- };
- };
-
- vbus_typec: vbus-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec_en>;
- regulator-name = "vbus_typec";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc12v_dcin: dc-12v {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- vcc3v3_lan: vcc3v3-lan-regulator {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_lan";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pwr_en>;
- regulator-name = "vcc3v3_pcie";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc5v0_sys: vcc-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc_0v9: vcc-0v9 {
- compatible = "regulator-fixed";
- regulator-name = "vcc_0v9";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vcc5v0_sys>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1400000>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc3v3_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- avdd-0v9-supply = <&vcca0v9_hdmi>;
- avdd-1v8-supply = <&vcca1v8_hdmi>;
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_codec: LDO_REG1 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca1v8_hdmi: LDO_REG2 {
- regulator-name = "vcca1v8_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_cam: SWITCH_REG1 {
- regulator-name = "vcc_cam";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_mipi: SWITCH_REG2 {
- regulator-name = "vcc_mipi";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_pin>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_pin>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-
- es8316: codec@11 {
- compatible = "everest,es8316";
- reg = <0x11>;
- clocks = <&cru SCLK_I2S_8CH_OUT>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
-
- port {
- es8316_p0_0: endpoint {
- remote-endpoint = <&i2s0_p0_0>;
- };
- };
- };
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-};
-
-&i2s0 {
- pinctrl-0 = <&i2s0_2ch_bus>;
- pinctrl-1 = <&i2s0_2ch_bus_bclk_off>;
- rockchip,capture-channels = <2>;
- rockchip,playback-channels = <2>;
- status = "okay";
-
- i2s0_p0: port {
- i2s0_p0_0: endpoint {
- dai-format = "i2s";
- mclk-fs = <256>;
- remote-endpoint = <&es8316_p0_0>;
- };
- };
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- audio-supply = <&vcca1v8_codec>;
- bt656-supply = <&vcc_3v0>;
- gpio1830-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio4 RK_PD3 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-0 = <&pcie_clkreqnb_cpm>;
- pinctrl-names = "default";
- vpcie0v9-supply = <&vcc_0v9>;
- vpcie1v8-supply = <&vcc_1v8>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pinctrl {
- bt {
- bt_enable_h: bt-enable-h {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- es8316 {
- hp_detect: hp-detect {
- rockchip,pins = <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- hp_int: hp-int {
- rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- leds {
- user_led2: user-led2 {
- rockchip,pins = <3 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_pwr_en: pcie-pwr-en {
- rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio0 {
- sdio0_bus4: sdio0-bus4 {
- rockchip,pins = <2 RK_PC4 1 &pcfg_pull_up_20ma>,
- <2 RK_PC5 1 &pcfg_pull_up_20ma>,
- <2 RK_PC6 1 &pcfg_pull_up_20ma>,
- <2 RK_PC7 1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_cmd: sdio0-cmd {
- rockchip,pins = <2 RK_PD0 1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_clk: sdio0-clk {
- rockchip,pins = <2 RK_PD1 1 &pcfg_pull_none_20ma>;
- };
- };
-
- usb-typec {
- vcc5v0_typec_en: vcc5v0-typec-en {
- rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- status = "okay";
-
- vref-supply = <&vcc_1v8>;
-};
-
-&sdhci {
- max-frequency = <150000000>;
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&sdio0 {
- #address-cells = <1>;
- #size-cells = <0>;
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>;
- status = "okay";
-};
-
-&spdif {
-
- spdif_p0: port {
- spdif_p0_0: endpoint {
- remote-endpoint = <&dit_p0_0>;
- };
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- status = "okay";
-
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
- */
-
-/dts-v1/;
-#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Radxa ROCK Pi 4A";
- compatible = "radxa,rockpi4a", "radxa,rockpi4", "rockchip,rk3399";
-};
-
-&spi1 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "rk3399-rock-pi-4.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- model = "Radxa ROCK Pi 4C";
- compatible = "radxa,rockpi4c", "radxa,rockpi4", "rockchip,rk3399";
-
- aliases {
- mmc2 = &sdio0;
- };
-};
-
-&es8316 {
- pinctrl-0 = <&hp_detect &hp_int>;
- pinctrl-names = "default";
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA1 IRQ_TYPE_LEVEL_HIGH>;
-};
-
-&sdio0 {
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sound {
- hp-det-gpio = <&gpio1 RK_PA0 GPIO_ACTIVE_HIGH>;
-};
-
-&spi1 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&uart0 {
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm4345c5";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- max-speed = <1500000>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&vcc5v0_host {
- gpio = <&gpio3 RK_PD6 GPIO_ACTIVE_HIGH>;
-};
-
-&vcc5v0_host_en {
- rockchip,pins = <3 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Linaro Ltd.
- */
-
-/dts-v1/;
-#include "rk3399-rock960.dtsi"
-
-/ {
- model = "96boards Rock960";
- compatible = "vamrs,rock960", "rockchip,rk3399";
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&user_led1_pin>, <&user_led2_pin>,
- <&user_led3_pin>, <&user_led4_pin>,
- <&wlan_led_pin>, <&bt_led_pin>;
-
- user_led1: led-1 {
- label = "green:user1";
- gpios = <&gpio4 RK_PC2 0>;
- linux,default-trigger = "heartbeat";
- };
-
- user_led2: led-2 {
- label = "green:user2";
- gpios = <&gpio4 RK_PC6 0>;
- linux,default-trigger = "mmc0";
- };
-
- user_led3: led-3 {
- label = "green:user3";
- gpios = <&gpio4 RK_PD0 0>;
- linux,default-trigger = "mmc1";
- };
-
- user_led4: led-4 {
- label = "green:user4";
- gpios = <&gpio4 RK_PD4 0>;
- panic-indicator;
- linux,default-trigger = "none";
- };
-
- wlan_active_led: led-5 {
- label = "yellow:wlan";
- gpios = <&gpio4 RK_PD5 0>;
- linux,default-trigger = "phy0tx";
- default-state = "off";
- };
-
- bt_active_led: led-6 {
- label = "blue:bt";
- gpios = <&gpio4 RK_PD6 0>;
- linux,default-trigger = "hci0-power";
- default-state = "off";
- };
- };
-
-};
-
-&cpu_alert0 {
- temperature = <65000>;
-};
-
-&cpu_thermal {
- sustainable-power = <1550>;
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert1>;
- };
- };
-};
-
-&pcie0 {
- ep-gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>;
-};
-
-&pinctrl {
- leds {
- user_led1_pin: user-led1-pin {
- rockchip,pins =
- <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led2_pin: user-led2-pin {
- rockchip,pins =
- <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led3_pin: user-led3-pin {
- rockchip,pins =
- <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- user_led4_pin: user-led4-pin {
- rockchip,pins =
- <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- wlan_led_pin: wlan-led-pin {
- rockchip,pins =
- <4 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_led_pin: bt-led-pin {
- rockchip,pins =
- <4 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_drv: pcie-drv {
- rockchip,pins =
- <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb2 {
- host_vbus_drv: host-vbus-drv {
- rockchip,pins =
- <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&spi0 {
- /* On Low speed expansion (LS-SPI0) */
- status = "okay";
-};
-
-&spi4 {
- /* On High speed expansion (HS-SPI1) */
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- dr_mode = "otg";
-};
-
-&usbdrd_dwc3_1 {
- dr_mode = "host";
-};
-
-&vcc3v3_pcie {
- gpio = <&gpio2 5 GPIO_ACTIVE_HIGH>;
-};
-
-&vcc5v0_host {
- gpio = <&gpio4 25 GPIO_ACTIVE_HIGH>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2018 Collabora Ltd.
- * Copyright (c) 2018 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Linaro Ltd.
- */
-
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-#include <dt-bindings/interrupt-controller/irq.h>
-
-/ {
- aliases {
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- vcc12v_dcin: vcc12v-dcin {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- vcc1v8_s0: vcc1v8-s0 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s0";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_drv>;
- regulator-boot-on;
- regulator-name = "vcc3v3_pcie";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc3v3_sys>;
- };
-
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- pinctrl-names = "default";
- pinctrl-0 = <&host_vbus_drv>;
- regulator-name = "vcc5v0_host";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-always-on;
- vin-supply = <&vcc5v0_sys>;
- };
-
- vcc_0v9: vcc-0v9 {
- compatible = "regulator-fixed";
- regulator-name = "vcc_0v9";
- regulator-always-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- vin-supply = <&vcc3v3_sys>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&hdmi {
- avdd-0v9-supply = <&vcca0v9_hdmi>;
- avdd-1v8-supply = <&vcca1v8_hdmi>;
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- status = "okay";
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio1>;
- interrupts = <21 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca1v8_hdmi: LDO_REG2 {
- regulator-name = "vcca1v8_hdmi";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sd: LDO_REG4 {
- regulator-name = "vcc_sd";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc3v0_sd: LDO_REG5 {
- regulator-name = "vcc3v0_sd";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca0v9_hdmi: LDO_REG7 {
- regulator-name = "vcca0v9_hdmi";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- bt656-supply = <&vcc1v8_s0>; /* bt656_gpio2ab_ms */
- audio-supply = <&vcc1v8_s0>; /* audio_gpio3d4a_ms */
- sdmmc-supply = <&vcc_sd>; /* sdmmc_gpio4b_ms */
- gpio1830-supply = <&vcc_3v0>; /* gpio1833_gpio4cd_ms */
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- vpcie0v9-supply = <&vcc_0v9>;
- vpcie1v8-supply = <&vcca_1v8>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_1v8>;
- status = "okay";
-};
-
-&pinctrl {
- bt {
- bt_enable_h: bt-enable-h {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 RK_PB0 1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 RK_PB0 1 &pcfg_pull_up_8ma>,
- <4 RK_PB1 1 &pcfg_pull_up_8ma>,
- <4 RK_PB2 1 &pcfg_pull_up_8ma>,
- <4 RK_PB3 1 &pcfg_pull_up_8ma>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 RK_PB4 1 &pcfg_pull_none_18ma>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 RK_PB5 1 &pcfg_pull_up_8ma>;
- };
- };
-
- sdio0 {
- sdio0_bus4: sdio0-bus4 {
- rockchip,pins =
- <2 RK_PC4 1 &pcfg_pull_up_20ma>,
- <2 RK_PC5 1 &pcfg_pull_up_20ma>,
- <2 RK_PC6 1 &pcfg_pull_up_20ma>,
- <2 RK_PC7 1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_cmd: sdio0-cmd {
- rockchip,pins =
- <2 RK_PD0 1 &pcfg_pull_up_20ma>;
- };
-
- sdio0_clk: sdio0-clk {
- rockchip,pins =
- <2 RK_PD1 1 &pcfg_pull_none_20ma>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins =
- <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins =
- <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins =
- <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins =
- <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- wifi {
- wifi_host_wake_l: wifi-host-wake-l {
- rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&pwm3 {
- status = "okay";
-};
-
-&sdio0 {
- bus-width = <4>;
- clock-frequency = <50000000>;
- cap-sdio-irq;
- cap-sd-highspeed;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- brcmf: wifi@1 {
- compatible = "brcm,bcm4329-fmac";
- reg = <1>;
- interrupt-parent = <&gpio0>;
- interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "host-wake";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_host_wake_l>;
- };
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-mmc-highspeed;
- cap-sd-highspeed;
- clock-frequency = <100000000>;
- max-frequency = <100000000>;
- cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- disable-wp;
- sd-uhs-sdr104;
- vqmmc-supply = <&vcc_sd>;
- card-detect-delay = <800>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- rockchip,hw-tshut-temp = <110000>;
- status = "okay";
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-};
-
-&u2phy1 {
- status = "okay";
-};
-
-&u2phy0_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy1_host {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
-};
-
-&u2phy0_otg {
- status = "okay";
-};
-
-&u2phy1_otg {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
- * Copyright (c) 2019 Katsuhiro Suzuki <katsuhiro@katsuster.net>
- */
-
-/dts-v1/;
-#include "rk3399-rockpro64.dtsi"
-
-/ {
- model = "Pine64 RockPro64 v2.1";
- compatible = "pine64,rockpro64-v2.1", "pine64,rockpro64", "rockchip,rk3399";
-};
-
-&i2c1 {
- es8316: codec@11 {
- compatible = "everest,es8316";
- reg = <0x11>;
- clocks = <&cru SCLK_I2S_8CH_OUT>;
- clock-names = "mclk";
- #sound-dai-cells = <0>;
-
- port {
- es8316_p0_0: endpoint {
- remote-endpoint = <&i2s1_p0_0>;
- };
- };
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd.
- * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com>
- */
-
-#include <dt-bindings/input/linux-event-codes.h>
-#include <dt-bindings/pwm/pwm.h>
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-
-/ {
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdio0;
- mmc1 = &sdmmc;
- mmc2 = &sdhci;
- };
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-
- /* enable for panel backlight support */
- backlight: backlight {
- compatible = "pwm-backlight";
- brightness-levels = <0 4 8 16 32 64 128 255>;
- default-brightness-level = <5>;
- pwms = <&pwm0 0 1000000 0>;
- status = "disabled";
- };
-
- clkin_gmac: external-gmac-clock {
- compatible = "fixed-clock";
- clock-frequency = <125000000>;
- clock-output-names = "clkin_gmac";
- #clock-cells = <0>;
- };
-
- gpio-keys {
- compatible = "gpio-keys";
- autorepeat;
- pinctrl-names = "default";
- pinctrl-0 = <&pwrbtn>;
-
- key-power {
- debounce-interval = <100>;
- gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>;
- label = "GPIO Key Power";
- linux,code = <KEY_POWER>;
- wakeup-source;
- };
- };
-
- ir-receiver {
- compatible = "gpio-ir-receiver";
- gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>;
- pinctrl-0 = <&ir_int>;
- pinctrl-names = "default";
- };
-
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&work_led_pin>, <&diy_led_pin>;
-
- work_led: led-0 {
- label = "work";
- default-state = "on";
- gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
- };
-
- diy_led: led-1 {
- label = "diy";
- default-state = "off";
- gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- fan: pwm-fan {
- compatible = "pwm-fan";
- cooling-levels = <0 100 150 200 255>;
- #cooling-cells = <2>;
- fan-supply = <&vcc12v_dcin>;
- pwms = <&pwm1 0 50000 0>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- clocks = <&rk808 1>;
- clock-names = "ext_clock";
- pinctrl-names = "default";
- pinctrl-0 = <&wifi_enable_h>;
- reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>;
- };
-
- sound {
- compatible = "audio-graph-card";
- label = "Analog";
- dais = <&i2s1_p0>;
- };
-
- sound-dit {
- compatible = "audio-graph-card";
- label = "SPDIF";
- dais = <&spdif_p0>;
- };
-
- spdif-dit {
- compatible = "linux,spdif-dit";
- #sound-dai-cells = <0>;
-
- port {
- dit_p0_0: endpoint {
- remote-endpoint = <&spdif_p0_0>;
- };
- };
- };
-
- avdd: avdd-regulator {
- compatible = "regulator-fixed";
- regulator-name = "avdd";
- regulator-min-microvolt = <11000000>;
- regulator-max-microvolt = <11000000>;
- vin-supply = <&vcc3v3_s0>;
- };
-
- vcc12v_dcin: vcc12v-dcin {
- compatible = "regulator-fixed";
- regulator-name = "vcc12v_dcin";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- };
-
- /* switched by pmic_sleep */
- vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 {
- compatible = "regulator-fixed";
- regulator-name = "vcc1v8_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_1v8>;
- };
-
- /* micro SD card power */
- vcc3v0_sd: vcc3v0-sd {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc0_pwr_h>;
- regulator-name = "vcc3v0_sd";
- regulator-always-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- vin-supply = <&vcc3v3_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_pcie: vcc3v3-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pwr_en>;
- regulator-name = "vcc3v3_pcie";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc3v3_sys: vcc3v3-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vcc5v0_sys>;
- };
-
- /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */
- vcc5v0_host: vcc5v0-host-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_host_en>;
- regulator-name = "vcc5v0_host";
- regulator-always-on;
- vin-supply = <&vcc5v0_usb>;
- };
-
- vcc5v0_typec: vcc5v0-typec-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&vcc5v0_typec_en>;
- regulator-name = "vcc5v0_typec";
- regulator-always-on;
- vin-supply = <&vcc5v0_usb>;
- };
-
- vcc5v0_sys: vcc5v0-sys {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vcc5v0_usb: vcc5v0-usb {
- compatible = "regulator-fixed";
- regulator-name = "vcc5v0_usb";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc12v_dcin>;
- };
-
- vdd_log: vdd-log {
- compatible = "pwm-regulator";
- pwms = <&pwm2 0 25000 1>;
- pwm-supply = <&vcc5v0_sys>;
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <1700000>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_b0 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_b1 {
- cpu-supply = <&vdd_cpu_b>;
-};
-
-&cpu_thermal {
- trips {
- cpu_warm: cpu_warm {
- temperature = <55000>;
- hysteresis = <2000>;
- type = "active";
- };
-
- cpu_hot: cpu_hot {
- temperature = <65000>;
- hysteresis = <2000>;
- type = "active";
- };
- };
-
- cooling-maps {
- map2 {
- trip = <&cpu_warm>;
- cooling-device = <&fan THERMAL_NO_LIMIT 1>;
- };
-
- map3 {
- trip = <&cpu_hot>;
- cooling-device = <&fan 2 THERMAL_NO_LIMIT>;
- };
- };
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- assigned-clock-parents = <&clkin_gmac>;
- clock_in_out = "input";
- phy-supply = <&vcc_lan>;
- phy-mode = "rgmii";
- pinctrl-names = "default";
- pinctrl-0 = <&rgmii_pins>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
- snps,reset-active-low;
- snps,reset-delays-us = <0 10000 50000>;
- tx_delay = <0x28>;
- rx_delay = <0x11>;
- status = "okay";
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
- status = "okay";
-};
-
-&hdmi_sound {
- status = "okay";
-};
-
-&gpu {
- mali-supply = <&vdd_gpu>;
- status = "okay";
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-rising-time-ns = <168>;
- i2c-scl-falling-time-ns = <4>;
- status = "okay";
-
- rk808: pmic@1b {
- compatible = "rockchip,rk808";
- reg = <0x1b>;
- interrupt-parent = <&gpio3>;
- interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "xin32k", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc6-supply = <&vcc5v0_sys>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
- vcc10-supply = <&vcc5v0_sys>;
- vcc11-supply = <&vcc5v0_sys>;
- vcc12-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcca_1v8>;
-
- regulators {
- vdd_center: DCDC_REG1 {
- regulator-name = "vdd_center";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc_1v8: DCDC_REG4 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc1v8_dvp: LDO_REG1 {
- regulator-name = "vcc1v8_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v0_touch: LDO_REG2 {
- regulator-name = "vcc3v0_touch";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcca_1v8: LDO_REG3 {
- regulator-name = "vcca_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_sdio: LDO_REG4 {
- regulator-name = "vcc_sdio";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcca3v0_codec: LDO_REG5 {
- regulator-name = "vcca3v0_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1500000>;
- };
- };
-
- vcca1v8_codec: LDO_REG7 {
- regulator-name = "vcca1v8_codec";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_3v0: LDO_REG8 {
- regulator-name = "vcc_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3000000>;
- };
- };
-
- vcc3v3_s3: vcc_lan: SWITCH_REG1 {
- regulator-name = "vcc3v3_s3";
- regulator-always-on;
- regulator-boot-on;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc3v3_s0: SWITCH_REG2 {
- regulator-name = "vcc3v3_s0";
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-
- vdd_cpu_b: regulator@40 {
- compatible = "silergy,syr827";
- reg = <0x40>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel1_pin>;
- regulator-name = "vdd_cpu_b";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vdd_gpu: regulator@41 {
- compatible = "silergy,syr828";
- reg = <0x41>;
- fcs,suspend-voltage-selector = <1>;
- pinctrl-names = "default";
- pinctrl-0 = <&vsel2_pin>;
- regulator-name = "vdd_gpu";
- regulator-min-microvolt = <712500>;
- regulator-max-microvolt = <1500000>;
- regulator-ramp-delay = <1000>;
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
-
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-};
-
-&i2c1 {
- i2c-scl-rising-time-ns = <300>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&i2c4 {
- i2c-scl-rising-time-ns = <600>;
- i2c-scl-falling-time-ns = <20>;
- status = "okay";
-
- fusb0: typec-portc@22 {
- compatible = "fcs,fusb302";
- reg = <0x22>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
- pinctrl-names = "default";
- pinctrl-0 = <&fusb0_int>;
- vbus-supply = <&vcc5v0_typec>;
- status = "okay";
- };
-
- /* enable for pine64 touch screen support */
- touch: touchscreen@5d {
- compatible = "goodix,gt911";
- reg = <0x5d>;
- interrupt-parent = <&gpio4>;
- interrupts = <RK_PD5 IRQ_TYPE_EDGE_FALLING>;
- AVDD28-supply = <&vcc3v0_touch>;
- VDDIO-supply = <&vcc3v0_touch>;
- irq-gpios = <&gpio4 RK_PD5 GPIO_ACTIVE_HIGH>;
- reset-gpios = <&gpio4 RK_PD6 GPIO_ACTIVE_HIGH>;
- status = "disabled";
- };
-};
-
-&i2s0 {
- rockchip,playback-channels = <8>;
- rockchip,capture-channels = <8>;
- status = "okay";
-};
-
-&i2s1 {
- rockchip,playback-channels = <2>;
- rockchip,capture-channels = <2>;
- status = "okay";
-
- i2s1_p0: port {
- i2s1_p0_0: endpoint {
- dai-format = "i2s";
- mclk-fs = <256>;
- remote-endpoint = <&es8316_p0_0>;
- };
- };
-};
-
-&i2s2 {
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
-
- bt656-supply = <&vcc1v8_dvp>;
- audio-supply = <&vcc_3v0>;
- sdmmc-supply = <&vcc_sdio>;
- gpio1830-supply = <&vcc_3v0>;
-};
-
-/* enable for pine64 panel display support */
-&mipi_dsi {
- clock-master;
- status = "disabled";
-
- ports {
- mipi_out: port@1 {
- reg = <1>;
-
- mipi_out_panel: endpoint {
- remote-endpoint = <&mipi_in_panel>;
- };
- };
- };
-
- mipi_panel: panel@0 {
- compatible = "feiyang,fy07024di26a30d";
- reg = <0>;
- avdd-supply = <&avdd>;
- backlight = <&backlight>;
- dvdd-supply = <&vcc3v3_s0>;
-
- port {
- mipi_in_panel: endpoint {
- remote-endpoint = <&mipi_out_panel>;
- };
- };
- };
-};
-
-&pcie0 {
- ep-gpios = <&gpio2 RK_PD4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_perst>;
- vpcie12v-supply = <&vcc12v_dcin>;
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pmu_io_domains {
- pmu1830-supply = <&vcc_3v0>;
- status = "okay";
-};
-
-&pinctrl {
- bt {
- bt_enable_h: bt-enable-h {
- rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- bt_host_wake_l: bt-host-wake-l {
- rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- bt_wake_l: bt-wake-l {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- buttons {
- pwrbtn: pwrbtn {
- rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- fusb302x {
- fusb0_int: fusb0-int {
- rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- ir {
- ir_int: ir-int {
- rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- leds {
- work_led_pin: work-led-pin {
- rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- diy_led_pin: diy-led-pin {
- rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_perst: pcie-perst {
- rockchip,pins = <2 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_pwr_en: pcie-pwr-en {
- rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
-
- vsel1_pin: vsel1-pin {
- rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>;
- };
-
- vsel2_pin: vsel2-pin {
- rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>;
- };
- };
-
- sdcard {
- sdmmc0_pwr_h: sdmmc0-pwr-h {
- rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- usb-typec {
- vcc5v0_typec_en: vcc5v0_typec_en {
- rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- usb2 {
- vcc5v0_host_en: vcc5v0-host-en {
- rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-};
-
-&pwm0 {
- status = "okay";
-};
-
-&pwm1 {
- status = "okay";
-};
-
-&pwm2 {
- status = "okay";
-};
-
-&saradc {
- vref-supply = <&vcca1v8_s3>;
- status = "okay";
-};
-
-&sdio0 {
- bus-width = <4>;
- cap-sd-highspeed;
- cap-sdio-irq;
- disable-wp;
- keep-power-in-suspend;
- mmc-pwrseq = <&sdio_pwrseq>;
- non-removable;
- pinctrl-names = "default";
- pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
- sd-uhs-sdr104;
- status = "okay";
-};
-
-&sdmmc {
- bus-width = <4>;
- cap-sd-highspeed;
- cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
- disable-wp;
- max-frequency = <150000000>;
- pinctrl-names = "default";
- pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
- vmmc-supply = <&vcc3v0_sd>;
- vqmmc-supply = <&vcc_sdio>;
- status = "okay";
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs200-1_8v;
- non-removable;
- status = "okay";
-};
-
-&spdif {
- pinctrl-0 = <&spdif_bus_1>;
-
- spdif_p0: port {
- spdif_p0_0: endpoint {
- remote-endpoint = <&dit_p0_0>;
- };
- };
-};
-
-&spi1 {
- status = "okay";
-
- flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <10000000>;
- };
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tcphy1 {
- status = "okay";
-};
-
-&tsadc {
- /* tshut mode 0:CRU 1:GPIO */
- rockchip,hw-tshut-mode = <1>;
- /* tshut polarity 0:LOW 1:HIGH */
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_otg: otg-port {
- status = "okay";
- };
-
- u2phy1_host: host-port {
- phy-supply = <&vcc5v0_host>;
- status = "okay";
- };
-};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
- status = "okay";
-
- bluetooth {
- compatible = "brcm,bcm43438-bt";
- clocks = <&rk808 1>;
- clock-names = "lpo";
- device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
- host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
- shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
- vbat-supply = <&vcc3v3_sys>;
- vddio-supply = <&vcc_1v8>;
- };
-};
-
-&uart2 {
- status = "okay";
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
- dr_mode = "host";
-};
-
-&usbdrd3_1 {
- status = "okay";
-};
-
-&usbdrd_dwc3_1 {
- status = "okay";
- dr_mode = "host";
-};
-
-&vopb {
- status = "okay";
-};
-
-&vopb_mmu {
- status = "okay";
-};
-
-&vopl {
- status = "okay";
-};
-
-&vopl_mmu {
- status = "okay";
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2022 Radxa Limited
- */
-
-/ {
- cluster0_opp: opp-table-0 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <875000 875000 1250000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <875000 875000 1250000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <900000 900000 1250000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <975000 975000 1250000>;
- };
- };
-
- cluster1_opp: opp-table-1 {
- compatible = "operating-points-v2";
- opp-shared;
-
- opp00 {
- opp-hz = /bits/ 64 <408000000>;
- opp-microvolt = <875000 875000 1250000>;
- clock-latency-ns = <40000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <875000 875000 1250000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <816000000>;
- opp-microvolt = <875000 875000 1250000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <1008000000>;
- opp-microvolt = <925000 925000 1250000>;
- };
- opp04 {
- opp-hz = /bits/ 64 <1200000000>;
- opp-microvolt = <1000000 1000000 1250000>;
- };
- opp05 {
- opp-hz = /bits/ 64 <1416000000>;
- opp-microvolt = <1075000 1075000 1250000>;
- };
- opp06 {
- opp-hz = /bits/ 64 <1512000000>;
- opp-microvolt = <1150000 1150000 1250000>;
- };
- };
-
- gpu_opp_table: opp-table-2 {
- compatible = "operating-points-v2";
-
- opp00 {
- opp-hz = /bits/ 64 <200000000>;
- opp-microvolt = <875000 875000 1150000>;
- };
- opp01 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <875000 875000 1150000>;
- };
- opp02 {
- opp-hz = /bits/ 64 <400000000>;
- opp-microvolt = <875000 875000 1150000>;
- };
- opp03 {
- opp-hz = /bits/ 64 <600000000>;
- opp-microvolt = <975000 975000 1150000>;
- };
- };
-};
-
-&cpu_l0 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l1 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l2 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_l3 {
- operating-points-v2 = <&cluster0_opp>;
-};
-
-&cpu_b0 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&cpu_b1 {
- operating-points-v2 = <&cluster1_opp>;
-};
-
-&gpu {
- operating-points-v2 = <&gpu_opp_table>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd
- */
-
-#include <dt-bindings/clock/rk3399-cru.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/power/rk3399-power.h>
-#include <dt-bindings/thermal/thermal.h>
-
-/ {
- compatible = "rockchip,rk3399";
-
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- gpio0 = &gpio0;
- gpio1 = &gpio1;
- gpio2 = &gpio2;
- gpio3 = &gpio3;
- gpio4 = &gpio4;
- i2c0 = &i2c0;
- i2c1 = &i2c1;
- i2c2 = &i2c2;
- i2c3 = &i2c3;
- i2c4 = &i2c4;
- i2c5 = &i2c5;
- i2c6 = &i2c6;
- i2c7 = &i2c7;
- i2c8 = &i2c8;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu-map {
- cluster0 {
- core0 {
- cpu = <&cpu_l0>;
- };
- core1 {
- cpu = <&cpu_l1>;
- };
- core2 {
- cpu = <&cpu_l2>;
- };
- core3 {
- cpu = <&cpu_l3>;
- };
- };
-
- cluster1 {
- core0 {
- cpu = <&cpu_b0>;
- };
- core1 {
- cpu = <&cpu_b1>;
- };
- };
- };
-
- cpu_l0: cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x0>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- };
-
- cpu_l1: cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x1>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- };
-
- cpu_l2: cpu@2 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x2>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- };
-
- cpu_l3: cpu@3 {
- device_type = "cpu";
- compatible = "arm,cortex-a53";
- reg = <0x0 0x3>;
- enable-method = "psci";
- capacity-dmips-mhz = <485>;
- clocks = <&cru ARMCLKL>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <100>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
- };
-
- cpu_b0: cpu@100 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <0x0 0x100>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&cru ARMCLKB>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <436>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-
- thermal-idle {
- #cooling-cells = <2>;
- duration-us = <10000>;
- exit-latency-us = <500>;
- };
- };
-
- cpu_b1: cpu@101 {
- device_type = "cpu";
- compatible = "arm,cortex-a72";
- reg = <0x0 0x101>;
- enable-method = "psci";
- capacity-dmips-mhz = <1024>;
- clocks = <&cru ARMCLKB>;
- #cooling-cells = <2>; /* min followed by max */
- dynamic-power-coefficient = <436>;
- cpu-idle-states = <&CPU_SLEEP &CLUSTER_SLEEP>;
-
- thermal-idle {
- #cooling-cells = <2>;
- duration-us = <10000>;
- exit-latency-us = <500>;
- };
- };
-
- idle-states {
- entry-method = "psci";
-
- CPU_SLEEP: cpu-sleep {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x0010000>;
- entry-latency-us = <120>;
- exit-latency-us = <250>;
- min-residency-us = <900>;
- };
-
- CLUSTER_SLEEP: cluster-sleep {
- compatible = "arm,idle-state";
- local-timer-stop;
- arm,psci-suspend-param = <0x1010000>;
- entry-latency-us = <400>;
- exit-latency-us = <500>;
- min-residency-us = <2000>;
- };
- };
- };
-
- display-subsystem {
- compatible = "rockchip,display-subsystem";
- ports = <&vopl_out>, <&vopb_out>;
- };
-
- dmc: memory-controller {
- compatible = "rockchip,rk3399-dmc";
- rockchip,pmu = <&pmugrf>;
- devfreq-events = <&dfi>;
- clocks = <&cru SCLK_DDRC>;
- clock-names = "dmc_clk";
- status = "disabled";
- };
-
- pmu_a53 {
- compatible = "arm,cortex-a53-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
- };
-
- pmu_a72 {
- compatible = "arm,cortex-a72-pmu";
- interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
- };
-
- psci {
- compatible = "arm,psci-1.0";
- method = "smc";
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
- <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
- <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
- <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
- arm,no-tick-in-suspend;
- };
-
- xin24m: xin24m {
- compatible = "fixed-clock";
- clock-frequency = <24000000>;
- clock-output-names = "xin24m";
- #clock-cells = <0>;
- };
-
- pcie0: pcie@f8000000 {
- compatible = "rockchip,rk3399-pcie";
- reg = <0x0 0xf8000000 0x0 0x2000000>,
- <0x0 0xfd000000 0x0 0x1000000>;
- reg-names = "axi-base", "apb-base";
- device_type = "pci";
- #address-cells = <3>;
- #size-cells = <2>;
- #interrupt-cells = <1>;
- aspm-no-l0s;
- bus-range = <0x0 0x1f>;
- clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
- <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
- clock-names = "aclk", "aclk-perf",
- "hclk", "pm";
- interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "sys", "legacy", "client";
- interrupt-map-mask = <0 0 0 7>;
- interrupt-map = <0 0 0 1 &pcie0_intc 0>,
- <0 0 0 2 &pcie0_intc 1>,
- <0 0 0 3 &pcie0_intc 2>,
- <0 0 0 4 &pcie0_intc 3>;
- max-link-speed = <1>;
- msi-map = <0x0 &its 0x0 0x1000>;
- phys = <&pcie_phy 0>, <&pcie_phy 1>,
- <&pcie_phy 2>, <&pcie_phy 3>;
- phy-names = "pcie-phy-0", "pcie-phy-1",
- "pcie-phy-2", "pcie-phy-3";
- ranges = <0x82000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x1e00000>,
- <0x81000000 0x0 0xfbe00000 0x0 0xfbe00000 0x0 0x100000>;
- resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
- <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
- <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
- <&cru SRST_A_PCIE>;
- reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
- "pm", "pclk", "aclk";
- status = "disabled";
-
- pcie0_intc: interrupt-controller {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <1>;
- };
- };
-
- pcie0_ep: pcie-ep@f8000000 {
- compatible = "rockchip,rk3399-pcie-ep";
- reg = <0x0 0xfd000000 0x0 0x1000000>,
- <0x0 0xfa000000 0x0 0x2000000>;
- reg-names = "apb-base", "mem-base";
- clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>,
- <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>;
- clock-names = "aclk", "aclk-perf",
- "hclk", "pm";
- max-functions = /bits/ 8 <8>;
- num-lanes = <4>;
- resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>,
- <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>,
- <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>,
- <&cru SRST_A_PCIE>;
- reset-names = "core", "mgmt", "mgmt-sticky", "pipe",
- "pm", "pclk", "aclk";
- phys = <&pcie_phy 0>, <&pcie_phy 1>,
- <&pcie_phy 2>, <&pcie_phy 3>;
- phy-names = "pcie-phy-0", "pcie-phy-1",
- "pcie-phy-2", "pcie-phy-3";
- rockchip,max-outbound-regions = <32>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqnb_cpm>;
- status = "disabled";
- };
-
- gmac: ethernet@fe300000 {
- compatible = "rockchip,rk3399-gmac";
- reg = <0x0 0xfe300000 0x0 0x10000>;
- interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "macirq";
- clocks = <&cru SCLK_MAC>, <&cru SCLK_MAC_RX>,
- <&cru SCLK_MAC_TX>, <&cru SCLK_MACREF>,
- <&cru SCLK_MACREF_OUT>, <&cru ACLK_GMAC>,
- <&cru PCLK_GMAC>;
- clock-names = "stmmaceth", "mac_clk_rx",
- "mac_clk_tx", "clk_mac_ref",
- "clk_mac_refout", "aclk_mac",
- "pclk_mac";
- power-domains = <&power RK3399_PD_GMAC>;
- resets = <&cru SRST_A_GMAC>;
- reset-names = "stmmaceth";
- rockchip,grf = <&grf>;
- snps,txpbl = <0x4>;
- status = "disabled";
- };
-
- sdio0: mmc@fe310000 {
- compatible = "rockchip,rk3399-dw-mshc",
- "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe310000 0x0 0x4000>;
- interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>;
- max-frequency = <150000000>;
- clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
- <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- resets = <&cru SRST_SDIO0>;
- reset-names = "reset";
- status = "disabled";
- };
-
- sdmmc: mmc@fe320000 {
- compatible = "rockchip,rk3399-dw-mshc",
- "rockchip,rk3288-dw-mshc";
- reg = <0x0 0xfe320000 0x0 0x4000>;
- interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>;
- max-frequency = <150000000>;
- assigned-clocks = <&cru HCLK_SD>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
- <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
- clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
- fifo-depth = <0x100>;
- power-domains = <&power RK3399_PD_SD>;
- resets = <&cru SRST_SDMMC>;
- reset-names = "reset";
- status = "disabled";
- };
-
- sdhci: mmc@fe330000 {
- compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1";
- reg = <0x0 0xfe330000 0x0 0x10000>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
- arasan,soc-ctl-syscon = <&grf>;
- assigned-clocks = <&cru SCLK_EMMC>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>;
- clock-names = "clk_xin", "clk_ahb";
- clock-output-names = "emmc_cardclock";
- #clock-cells = <0>;
- phys = <&emmc_phy>;
- phy-names = "phy_arasan";
- power-domains = <&power RK3399_PD_EMMC>;
- disable-cqe-dcmd;
- status = "disabled";
- };
-
- usb_host0_ehci: usb@fe380000 {
- compatible = "generic-ehci";
- reg = <0x0 0xfe380000 0x0 0x20000>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
- <&u2phy0>;
- phys = <&u2phy0_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- usb_host0_ohci: usb@fe3a0000 {
- compatible = "generic-ohci";
- reg = <0x0 0xfe3a0000 0x0 0x20000>;
- interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>,
- <&u2phy0>;
- phys = <&u2phy0_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- usb_host1_ehci: usb@fe3c0000 {
- compatible = "generic-ehci";
- reg = <0x0 0xfe3c0000 0x0 0x20000>;
- interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
- <&u2phy1>;
- phys = <&u2phy1_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- usb_host1_ohci: usb@fe3e0000 {
- compatible = "generic-ohci";
- reg = <0x0 0xfe3e0000 0x0 0x20000>;
- interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>,
- <&u2phy1>;
- phys = <&u2phy1_host>;
- phy-names = "usb";
- status = "disabled";
- };
-
- debug@fe430000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe430000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l0>;
- };
-
- debug@fe432000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe432000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l1>;
- };
-
- debug@fe434000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe434000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l2>;
- };
-
- debug@fe436000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe436000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_L>;
- clock-names = "apb_pclk";
- cpu = <&cpu_l3>;
- };
-
- debug@fe610000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe610000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_B>;
- clock-names = "apb_pclk";
- cpu = <&cpu_b0>;
- };
-
- debug@fe710000 {
- compatible = "arm,coresight-cpu-debug", "arm,primecell";
- reg = <0 0xfe710000 0 0x1000>;
- clocks = <&cru PCLK_COREDBG_B>;
- clock-names = "apb_pclk";
- cpu = <&cpu_b1>;
- };
-
- usbdrd3_0: usb@fe800000 {
- compatible = "rockchip,rk3399-dwc3";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>,
- <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
- <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
- clock-names = "ref_clk", "suspend_clk",
- "bus_clk", "aclk_usb3_rksoc_axi_perf",
- "aclk_usb3", "grf_clk";
- resets = <&cru SRST_A_USB3_OTG0>;
- reset-names = "usb3-otg";
- status = "disabled";
-
- usbdrd_dwc3_0: usb@fe800000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xfe800000 0x0 0x100000>;
- interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_USB3OTG0_REF>, <&cru ACLK_USB3OTG0>,
- <&cru SCLK_USB3OTG0_SUSPEND>;
- clock-names = "ref", "bus_early", "suspend";
- dr_mode = "otg";
- phys = <&u2phy0_otg>, <&tcphy0_usb3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- snps,dis_enblslpm_quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis_u2_susphy_quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- power-domains = <&power RK3399_PD_USB3>;
- status = "disabled";
- };
- };
-
- usbdrd3_1: usb@fe900000 {
- compatible = "rockchip,rk3399-dwc3";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>,
- <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>,
- <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>;
- clock-names = "ref_clk", "suspend_clk",
- "bus_clk", "aclk_usb3_rksoc_axi_perf",
- "aclk_usb3", "grf_clk";
- resets = <&cru SRST_A_USB3_OTG1>;
- reset-names = "usb3-otg";
- status = "disabled";
-
- usbdrd_dwc3_1: usb@fe900000 {
- compatible = "snps,dwc3";
- reg = <0x0 0xfe900000 0x0 0x100000>;
- interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_USB3OTG1_REF>, <&cru ACLK_USB3OTG1>,
- <&cru SCLK_USB3OTG1_SUSPEND>;
- clock-names = "ref", "bus_early", "suspend";
- dr_mode = "otg";
- phys = <&u2phy1_otg>, <&tcphy1_usb3>;
- phy-names = "usb2-phy", "usb3-phy";
- phy_type = "utmi_wide";
- snps,dis_enblslpm_quirk;
- snps,dis-u2-freeclk-exists-quirk;
- snps,dis_u2_susphy_quirk;
- snps,dis-del-phy-power-chg-quirk;
- snps,dis-tx-ipgap-linecheck-quirk;
- power-domains = <&power RK3399_PD_USB3>;
- status = "disabled";
- };
- };
-
- cdn_dp: dp@fec00000 {
- compatible = "rockchip,rk3399-cdn-dp";
- reg = <0x0 0xfec00000 0x0 0x100000>;
- interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru SCLK_DP_CORE>, <&cru SCLK_SPDIF_REC_DPTX>;
- assigned-clock-rates = <100000000>, <200000000>;
- clocks = <&cru SCLK_DP_CORE>, <&cru PCLK_DP_CTRL>,
- <&cru SCLK_SPDIF_REC_DPTX>, <&cru PCLK_VIO_GRF>;
- clock-names = "core-clk", "pclk", "spdif", "grf";
- phys = <&tcphy0_dp>, <&tcphy1_dp>;
- power-domains = <&power RK3399_PD_HDCP>;
- resets = <&cru SRST_DPTX_SPDIF_REC>, <&cru SRST_P_UPHY0_DPTX>,
- <&cru SRST_P_UPHY0_APB>, <&cru SRST_DP_CORE>;
- reset-names = "spdif", "dptx", "apb", "core";
- rockchip,grf = <&grf>;
- #sound-dai-cells = <1>;
- status = "disabled";
-
- ports {
- dp_in: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- dp_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_dp>;
- };
-
- dp_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_dp>;
- };
- };
- };
- };
-
- gic: interrupt-controller@fee00000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <4>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- interrupt-controller;
-
- reg = <0x0 0xfee00000 0 0x10000>, /* GICD */
- <0x0 0xfef00000 0 0xc0000>, /* GICR */
- <0x0 0xfff00000 0 0x10000>, /* GICC */
- <0x0 0xfff10000 0 0x10000>, /* GICH */
- <0x0 0xfff20000 0 0x10000>; /* GICV */
- interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
- its: msi-controller@fee20000 {
- compatible = "arm,gic-v3-its";
- msi-controller;
- #msi-cells = <1>;
- reg = <0x0 0xfee20000 0x0 0x20000>;
- };
-
- ppi-partitions {
- ppi_cluster0: interrupt-partition-0 {
- affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>;
- };
-
- ppi_cluster1: interrupt-partition-1 {
- affinity = <&cpu_b0 &cpu_b1>;
- };
- };
- };
-
- saradc: saradc@ff100000 {
- compatible = "rockchip,rk3399-saradc";
- reg = <0x0 0xff100000 0x0 0x100>;
- interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>;
- #io-channel-cells = <1>;
- clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
- clock-names = "saradc", "apb_pclk";
- resets = <&cru SRST_P_SARADC>;
- reset-names = "saradc-apb";
- status = "disabled";
- };
-
- crypto0: crypto@ff8b0000 {
- compatible = "rockchip,rk3399-crypto";
- reg = <0x0 0xff8b0000 0x0 0x4000>;
- interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_M_CRYPTO0>, <&cru HCLK_S_CRYPTO0>, <&cru SCLK_CRYPTO0>;
- clock-names = "hclk_master", "hclk_slave", "sclk";
- resets = <&cru SRST_CRYPTO0>, <&cru SRST_CRYPTO0_S>, <&cru SRST_CRYPTO0_M>;
- reset-names = "master", "slave", "crypto-rst";
- };
-
- crypto1: crypto@ff8b8000 {
- compatible = "rockchip,rk3399-crypto";
- reg = <0x0 0xff8b8000 0x0 0x4000>;
- interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru HCLK_M_CRYPTO1>, <&cru HCLK_S_CRYPTO1>, <&cru SCLK_CRYPTO1>;
- clock-names = "hclk_master", "hclk_slave", "sclk";
- resets = <&cru SRST_CRYPTO1>, <&cru SRST_CRYPTO1_S>, <&cru SRST_CRYPTO1_M>;
- reset-names = "master", "slave", "crypto-rst";
- };
-
- i2c1: i2c@ff110000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff110000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C1>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c1_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c2: i2c@ff120000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff120000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C2>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c3: i2c@ff130000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff130000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C3>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c3_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c5: i2c@ff140000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff140000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C5>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c5_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c6: i2c@ff150000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff150000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C6>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c6_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c7: i2c@ff160000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff160000 0x0 0x1000>;
- assigned-clocks = <&cru SCLK_I2C7>;
- assigned-clock-rates = <200000000>;
- clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c7_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart0: serial@ff180000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff180000 0x0 0x100>;
- clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_xfer>;
- status = "disabled";
- };
-
- uart1: serial@ff190000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff190000 0x0 0x100>;
- clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart1_xfer>;
- status = "disabled";
- };
-
- uart2: serial@ff1a0000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff1a0000 0x0 0x100>;
- clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart2c_xfer>;
- status = "disabled";
- };
-
- uart3: serial@ff1b0000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff1b0000 0x0 0x100>;
- clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart3_xfer>;
- status = "disabled";
- };
-
- spi0: spi@ff1c0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1c0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 10>, <&dmac_peri 11>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi1: spi@ff1d0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1d0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 12>, <&dmac_peri 13>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi2: spi@ff1e0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1e0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 14>, <&dmac_peri 15>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi4: spi@ff1f0000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff1f0000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_peri 18>, <&dmac_peri 19>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- spi5: spi@ff200000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff200000 0x0 0x1000>;
- clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 8>, <&dmac_bus 9>;
- dma-names = "tx", "rx";
- pinctrl-names = "default";
- pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- thermal_zones: thermal-zones {
- cpu_thermal: cpu-thermal {
- polling-delay-passive = <100>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsadc 0>;
-
- trips {
- cpu_alert0: cpu_alert0 {
- temperature = <70000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_alert1: cpu_alert1 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- cpu_crit: cpu_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&cpu_alert0>;
- cooling-device =
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- map1 {
- trip = <&cpu_alert1>;
- cooling-device =
- <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
- <&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
-
- gpu_thermal: gpu-thermal {
- polling-delay-passive = <100>;
- polling-delay = <1000>;
-
- thermal-sensors = <&tsadc 1>;
-
- trips {
- gpu_alert0: gpu_alert0 {
- temperature = <75000>;
- hysteresis = <2000>;
- type = "passive";
- };
- gpu_crit: gpu_crit {
- temperature = <95000>;
- hysteresis = <2000>;
- type = "critical";
- };
- };
-
- cooling-maps {
- map0 {
- trip = <&gpu_alert0>;
- cooling-device =
- <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
- };
- };
- };
- };
-
- tsadc: tsadc@ff260000 {
- compatible = "rockchip,rk3399-tsadc";
- reg = <0x0 0xff260000 0x0 0x100>;
- interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru SCLK_TSADC>;
- assigned-clock-rates = <750000>;
- clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
- clock-names = "tsadc", "apb_pclk";
- resets = <&cru SRST_TSADC>;
- reset-names = "tsadc-apb";
- rockchip,grf = <&grf>;
- rockchip,hw-tshut-temp = <95000>;
- pinctrl-names = "init", "default", "sleep";
- pinctrl-0 = <&otp_pin>;
- pinctrl-1 = <&otp_out>;
- pinctrl-2 = <&otp_pin>;
- #thermal-sensor-cells = <1>;
- status = "disabled";
- };
-
- qos_emmc: qos@ffa58000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa58000 0x0 0x20>;
- };
-
- qos_gmac: qos@ffa5c000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa5c000 0x0 0x20>;
- };
-
- qos_pcie: qos@ffa60080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa60080 0x0 0x20>;
- };
-
- qos_usb_host0: qos@ffa60100 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa60100 0x0 0x20>;
- };
-
- qos_usb_host1: qos@ffa60180 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa60180 0x0 0x20>;
- };
-
- qos_usb_otg0: qos@ffa70000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa70000 0x0 0x20>;
- };
-
- qos_usb_otg1: qos@ffa70080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa70080 0x0 0x20>;
- };
-
- qos_sd: qos@ffa74000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa74000 0x0 0x20>;
- };
-
- qos_sdioaudio: qos@ffa76000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa76000 0x0 0x20>;
- };
-
- qos_hdcp: qos@ffa90000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa90000 0x0 0x20>;
- };
-
- qos_iep: qos@ffa98000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffa98000 0x0 0x20>;
- };
-
- qos_isp0_m0: qos@ffaa0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa0000 0x0 0x20>;
- };
-
- qos_isp0_m1: qos@ffaa0080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa0080 0x0 0x20>;
- };
-
- qos_isp1_m0: qos@ffaa8000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa8000 0x0 0x20>;
- };
-
- qos_isp1_m1: qos@ffaa8080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffaa8080 0x0 0x20>;
- };
-
- qos_rga_r: qos@ffab0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffab0000 0x0 0x20>;
- };
-
- qos_rga_w: qos@ffab0080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffab0080 0x0 0x20>;
- };
-
- qos_video_m0: qos@ffab8000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffab8000 0x0 0x20>;
- };
-
- qos_video_m1_r: qos@ffac0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac0000 0x0 0x20>;
- };
-
- qos_video_m1_w: qos@ffac0080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac0080 0x0 0x20>;
- };
-
- qos_vop_big_r: qos@ffac8000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac8000 0x0 0x20>;
- };
-
- qos_vop_big_w: qos@ffac8080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffac8080 0x0 0x20>;
- };
-
- qos_vop_little: qos@ffad0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffad0000 0x0 0x20>;
- };
-
- qos_perihp: qos@ffad8080 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffad8080 0x0 0x20>;
- };
-
- qos_gpu: qos@ffae0000 {
- compatible = "rockchip,rk3399-qos", "syscon";
- reg = <0x0 0xffae0000 0x0 0x20>;
- };
-
- pmu: power-management@ff310000 {
- compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd";
- reg = <0x0 0xff310000 0x0 0x1000>;
-
- /*
- * Note: RK3399 supports 6 voltage domains including VD_CORE_L,
- * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU.
- * Some of the power domains are grouped together for every
- * voltage domain.
- * The detail contents as below.
- */
- power: power-controller {
- compatible = "rockchip,rk3399-power-controller";
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- /* These power domains are grouped by VD_CENTER */
- power-domain@RK3399_PD_IEP {
- reg = <RK3399_PD_IEP>;
- clocks = <&cru ACLK_IEP>,
- <&cru HCLK_IEP>;
- pm_qos = <&qos_iep>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_RGA {
- reg = <RK3399_PD_RGA>;
- clocks = <&cru ACLK_RGA>,
- <&cru HCLK_RGA>;
- pm_qos = <&qos_rga_r>,
- <&qos_rga_w>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VCODEC {
- reg = <RK3399_PD_VCODEC>;
- clocks = <&cru ACLK_VCODEC>,
- <&cru HCLK_VCODEC>;
- pm_qos = <&qos_video_m0>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VDU {
- reg = <RK3399_PD_VDU>;
- clocks = <&cru ACLK_VDU>,
- <&cru HCLK_VDU>,
- <&cru SCLK_VDU_CA>,
- <&cru SCLK_VDU_CORE>;
- pm_qos = <&qos_video_m1_r>,
- <&qos_video_m1_w>;
- #power-domain-cells = <0>;
- };
-
- /* These power domains are grouped by VD_GPU */
- power-domain@RK3399_PD_GPU {
- reg = <RK3399_PD_GPU>;
- clocks = <&cru ACLK_GPU>;
- pm_qos = <&qos_gpu>;
- #power-domain-cells = <0>;
- };
-
- /* These power domains are grouped by VD_LOGIC */
- power-domain@RK3399_PD_EDP {
- reg = <RK3399_PD_EDP>;
- clocks = <&cru PCLK_EDP_CTRL>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_EMMC {
- reg = <RK3399_PD_EMMC>;
- clocks = <&cru ACLK_EMMC>;
- pm_qos = <&qos_emmc>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_GMAC {
- reg = <RK3399_PD_GMAC>;
- clocks = <&cru ACLK_GMAC>,
- <&cru PCLK_GMAC>;
- pm_qos = <&qos_gmac>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_SD {
- reg = <RK3399_PD_SD>;
- clocks = <&cru HCLK_SDMMC>,
- <&cru SCLK_SDMMC>;
- pm_qos = <&qos_sd>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_SDIOAUDIO {
- reg = <RK3399_PD_SDIOAUDIO>;
- clocks = <&cru HCLK_SDIO>;
- pm_qos = <&qos_sdioaudio>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_TCPD0 {
- reg = <RK3399_PD_TCPD0>;
- clocks = <&cru SCLK_UPHY0_TCPDCORE>,
- <&cru SCLK_UPHY0_TCPDPHY_REF>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_TCPD1 {
- reg = <RK3399_PD_TCPD1>;
- clocks = <&cru SCLK_UPHY1_TCPDCORE>,
- <&cru SCLK_UPHY1_TCPDPHY_REF>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_USB3 {
- reg = <RK3399_PD_USB3>;
- clocks = <&cru ACLK_USB3>;
- pm_qos = <&qos_usb_otg0>,
- <&qos_usb_otg1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VIO {
- reg = <RK3399_PD_VIO>;
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@RK3399_PD_HDCP {
- reg = <RK3399_PD_HDCP>;
- clocks = <&cru ACLK_HDCP>,
- <&cru HCLK_HDCP>,
- <&cru PCLK_HDCP>;
- pm_qos = <&qos_hdcp>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_ISP0 {
- reg = <RK3399_PD_ISP0>;
- clocks = <&cru ACLK_ISP0>,
- <&cru HCLK_ISP0>;
- pm_qos = <&qos_isp0_m0>,
- <&qos_isp0_m1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_ISP1 {
- reg = <RK3399_PD_ISP1>;
- clocks = <&cru ACLK_ISP1>,
- <&cru HCLK_ISP1>;
- pm_qos = <&qos_isp1_m0>,
- <&qos_isp1_m1>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VO {
- reg = <RK3399_PD_VO>;
- #power-domain-cells = <1>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- power-domain@RK3399_PD_VOPB {
- reg = <RK3399_PD_VOPB>;
- clocks = <&cru ACLK_VOP0>,
- <&cru HCLK_VOP0>;
- pm_qos = <&qos_vop_big_r>,
- <&qos_vop_big_w>;
- #power-domain-cells = <0>;
- };
- power-domain@RK3399_PD_VOPL {
- reg = <RK3399_PD_VOPL>;
- clocks = <&cru ACLK_VOP1>,
- <&cru HCLK_VOP1>;
- pm_qos = <&qos_vop_little>;
- #power-domain-cells = <0>;
- };
- };
- };
- };
- };
-
- pmugrf: syscon@ff320000 {
- compatible = "rockchip,rk3399-pmugrf", "syscon", "simple-mfd";
- reg = <0x0 0xff320000 0x0 0x1000>;
-
- pmu_io_domains: io-domains {
- compatible = "rockchip,rk3399-pmu-io-voltage-domain";
- status = "disabled";
- };
- };
-
- spi3: spi@ff350000 {
- compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi";
- reg = <0x0 0xff350000 0x0 0x1000>;
- clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>;
- clock-names = "spiclk", "apb_pclk";
- interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- uart4: serial@ff370000 {
- compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart";
- reg = <0x0 0xff370000 0x0 0x100>;
- clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>;
- clock-names = "baudclk", "apb_pclk";
- interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>;
- reg-shift = <2>;
- reg-io-width = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&uart4_xfer>;
- status = "disabled";
- };
-
- i2c0: i2c@ff3c0000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff3c0000 0x0 0x1000>;
- assigned-clocks = <&pmucru SCLK_I2C0_PMU>;
- assigned-clock-rates = <200000000>;
- clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c4: i2c@ff3d0000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff3d0000 0x0 0x1000>;
- assigned-clocks = <&pmucru SCLK_I2C4_PMU>;
- assigned-clock-rates = <200000000>;
- clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c4_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- i2c8: i2c@ff3e0000 {
- compatible = "rockchip,rk3399-i2c";
- reg = <0x0 0xff3e0000 0x0 0x1000>;
- assigned-clocks = <&pmucru SCLK_I2C8_PMU>;
- assigned-clock-rates = <200000000>;
- clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>;
- clock-names = "i2c", "pclk";
- interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c8_xfer>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
- };
-
- pwm0: pwm@ff420000 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420000 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm0_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- pwm1: pwm@ff420010 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420010 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm1_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- pwm2: pwm@ff420020 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420020 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm2_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- pwm3: pwm@ff420030 {
- compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm";
- reg = <0x0 0xff420030 0x0 0x10>;
- #pwm-cells = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pwm3a_pin>;
- clocks = <&pmucru PCLK_RKPWM_PMU>;
- status = "disabled";
- };
-
- dfi: dfi@ff630000 {
- reg = <0x00 0xff630000 0x00 0x4000>;
- compatible = "rockchip,rk3399-dfi";
- rockchip,pmu = <&pmugrf>;
- interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_DDR_MON>;
- clock-names = "pclk_ddr_mon";
- };
-
- vpu: video-codec@ff650000 {
- compatible = "rockchip,rk3399-vpu";
- reg = <0x0 0xff650000 0x0 0x800>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "vepu", "vdpu";
- clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
- clock-names = "aclk", "hclk";
- iommus = <&vpu_mmu>;
- power-domains = <&power RK3399_PD_VCODEC>;
- };
-
- vpu_mmu: iommu@ff650800 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff650800 0x0 0x40>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power RK3399_PD_VCODEC>;
- };
-
- vdec: video-codec@ff660000 {
- compatible = "rockchip,rk3399-vdec";
- reg = <0x0 0xff660000 0x0 0x480>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>,
- <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>;
- clock-names = "axi", "ahb", "cabac", "core";
- iommus = <&vdec_mmu>;
- power-domains = <&power RK3399_PD_VDU>;
- };
-
- vdec_mmu: iommu@ff660480 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>;
- clock-names = "aclk", "iface";
- power-domains = <&power RK3399_PD_VDU>;
- #iommu-cells = <0>;
- };
-
- iep_mmu: iommu@ff670800 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff670800 0x0 0x40>;
- interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_IEP>, <&cru HCLK_IEP>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- rga: rga@ff680000 {
- compatible = "rockchip,rk3399-rga";
- reg = <0x0 0xff680000 0x0 0x10000>;
- interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>;
- clock-names = "aclk", "hclk", "sclk";
- resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>;
- reset-names = "core", "axi", "ahb";
- power-domains = <&power RK3399_PD_RGA>;
- };
-
- efuse0: efuse@ff690000 {
- compatible = "rockchip,rk3399-efuse";
- reg = <0x0 0xff690000 0x0 0x80>;
- #address-cells = <1>;
- #size-cells = <1>;
- clocks = <&cru PCLK_EFUSE1024NS>;
- clock-names = "pclk_efuse";
-
- /* Data cells */
- cpu_id: cpu-id@7 {
- reg = <0x07 0x10>;
- };
- cpub_leakage: cpu-leakage@17 {
- reg = <0x17 0x1>;
- };
- gpu_leakage: gpu-leakage@18 {
- reg = <0x18 0x1>;
- };
- center_leakage: center-leakage@19 {
- reg = <0x19 0x1>;
- };
- cpul_leakage: cpu-leakage@1a {
- reg = <0x1a 0x1>;
- };
- logic_leakage: logic-leakage@1b {
- reg = <0x1b 0x1>;
- };
- wafer_info: wafer-info@1c {
- reg = <0x1c 0x1>;
- };
- };
-
- dmac_bus: dma-controller@ff6d0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6d0000 0x0 0x4000>;
- interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC0_PERILP>;
- clock-names = "apb_pclk";
- };
-
- dmac_peri: dma-controller@ff6e0000 {
- compatible = "arm,pl330", "arm,primecell";
- reg = <0x0 0xff6e0000 0x0 0x4000>;
- interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>;
- #dma-cells = <1>;
- arm,pl330-periph-burst;
- clocks = <&cru ACLK_DMAC1_PERILP>;
- clock-names = "apb_pclk";
- };
-
- pmucru: clock-controller@ff750000 {
- compatible = "rockchip,rk3399-pmucru";
- reg = <0x0 0xff750000 0x0 0x1000>;
- clocks = <&xin24m>;
- clock-names = "xin24m";
- rockchip,grf = <&pmugrf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- assigned-clocks = <&pmucru PLL_PPLL>;
- assigned-clock-rates = <676000000>;
- };
-
- cru: clock-controller@ff760000 {
- compatible = "rockchip,rk3399-cru";
- reg = <0x0 0xff760000 0x0 0x1000>;
- clocks = <&xin24m>;
- clock-names = "xin24m";
- rockchip,grf = <&grf>;
- #clock-cells = <1>;
- #reset-cells = <1>;
- assigned-clocks =
- <&cru PLL_GPLL>, <&cru PLL_CPLL>,
- <&cru PLL_NPLL>,
- <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>,
- <&cru PCLK_PERIHP>,
- <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>,
- <&cru PCLK_PERILP0>, <&cru ACLK_CCI>,
- <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>,
- <&cru ACLK_VIO>, <&cru ACLK_HDCP>,
- <&cru ACLK_GIC_PRE>,
- <&cru PCLK_DDR>,
- <&cru ACLK_VDU>;
- assigned-clock-rates =
- <594000000>, <800000000>,
- <1000000000>,
- <150000000>, <75000000>,
- <37500000>,
- <100000000>, <100000000>,
- <50000000>, <600000000>,
- <100000000>, <50000000>,
- <400000000>, <400000000>,
- <200000000>,
- <200000000>,
- <400000000>;
- };
-
- grf: syscon@ff770000 {
- compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd";
- reg = <0x0 0xff770000 0x0 0x10000>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- io_domains: io-domains {
- compatible = "rockchip,rk3399-io-voltage-domain";
- status = "disabled";
- };
-
- mipi_dphy_rx0: mipi-dphy-rx0 {
- compatible = "rockchip,rk3399-mipi-dphy-rx0";
- clocks = <&cru SCLK_MIPIDPHY_REF>,
- <&cru SCLK_DPHY_RX0_CFG>,
- <&cru PCLK_VIO_GRF>;
- clock-names = "dphy-ref", "dphy-cfg", "grf";
- power-domains = <&power RK3399_PD_VIO>;
- #phy-cells = <0>;
- status = "disabled";
- };
-
- u2phy0: usb2phy@e450 {
- compatible = "rockchip,rk3399-usb2phy";
- reg = <0xe450 0x10>;
- clocks = <&cru SCLK_USB2PHY0_REF>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- clock-output-names = "clk_usbphy0_480m";
- status = "disabled";
-
- u2phy0_host: host-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "linestate";
- status = "disabled";
- };
-
- u2phy0_otg: otg-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "otg-bvalid", "otg-id",
- "linestate";
- status = "disabled";
- };
- };
-
- u2phy1: usb2phy@e460 {
- compatible = "rockchip,rk3399-usb2phy";
- reg = <0xe460 0x10>;
- clocks = <&cru SCLK_USB2PHY1_REF>;
- clock-names = "phyclk";
- #clock-cells = <0>;
- clock-output-names = "clk_usbphy1_480m";
- status = "disabled";
-
- u2phy1_host: host-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "linestate";
- status = "disabled";
- };
-
- u2phy1_otg: otg-port {
- #phy-cells = <0>;
- interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "otg-bvalid", "otg-id",
- "linestate";
- status = "disabled";
- };
- };
-
- emmc_phy: phy@f780 {
- compatible = "rockchip,rk3399-emmc-phy";
- reg = <0xf780 0x24>;
- clocks = <&sdhci>;
- clock-names = "emmcclk";
- drive-impedance-ohm = <50>;
- #phy-cells = <0>;
- status = "disabled";
- };
-
- pcie_phy: pcie-phy {
- compatible = "rockchip,rk3399-pcie-phy";
- clocks = <&cru SCLK_PCIEPHY_REF>;
- clock-names = "refclk";
- #phy-cells = <1>;
- resets = <&cru SRST_PCIEPHY>;
- reset-names = "phy";
- status = "disabled";
- };
- };
-
- tcphy0: phy@ff7c0000 {
- compatible = "rockchip,rk3399-typec-phy";
- reg = <0x0 0xff7c0000 0x0 0x40000>;
- clocks = <&cru SCLK_UPHY0_TCPDCORE>,
- <&cru SCLK_UPHY0_TCPDPHY_REF>;
- clock-names = "tcpdcore", "tcpdphy-ref";
- assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>;
- assigned-clock-rates = <50000000>;
- power-domains = <&power RK3399_PD_TCPD0>;
- resets = <&cru SRST_UPHY0>,
- <&cru SRST_UPHY0_PIPE_L00>,
- <&cru SRST_P_UPHY0_TCPHY>;
- reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
- rockchip,grf = <&grf>;
- status = "disabled";
-
- tcphy0_dp: dp-port {
- #phy-cells = <0>;
- };
-
- tcphy0_usb3: usb3-port {
- #phy-cells = <0>;
- };
- };
-
- tcphy1: phy@ff800000 {
- compatible = "rockchip,rk3399-typec-phy";
- reg = <0x0 0xff800000 0x0 0x40000>;
- clocks = <&cru SCLK_UPHY1_TCPDCORE>,
- <&cru SCLK_UPHY1_TCPDPHY_REF>;
- clock-names = "tcpdcore", "tcpdphy-ref";
- assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>;
- assigned-clock-rates = <50000000>;
- power-domains = <&power RK3399_PD_TCPD1>;
- resets = <&cru SRST_UPHY1>,
- <&cru SRST_UPHY1_PIPE_L00>,
- <&cru SRST_P_UPHY1_TCPHY>;
- reset-names = "uphy", "uphy-pipe", "uphy-tcphy";
- rockchip,grf = <&grf>;
- status = "disabled";
-
- tcphy1_dp: dp-port {
- #phy-cells = <0>;
- };
-
- tcphy1_usb3: usb3-port {
- #phy-cells = <0>;
- };
- };
-
- watchdog@ff848000 {
- compatible = "rockchip,rk3399-wdt", "snps,dw-wdt";
- reg = <0x0 0xff848000 0x0 0x100>;
- clocks = <&cru PCLK_WDT>;
- interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>;
- };
-
- rktimer: rktimer@ff850000 {
- compatible = "rockchip,rk3399-timer";
- reg = <0x0 0xff850000 0x0 0x1000>;
- interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>;
- clock-names = "pclk", "timer";
- };
-
- spdif: spdif@ff870000 {
- compatible = "rockchip,rk3399-spdif";
- reg = <0x0 0xff870000 0x0 0x1000>;
- interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 7>;
- dma-names = "tx";
- clock-names = "mclk", "hclk";
- clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>;
- pinctrl-names = "default";
- pinctrl-0 = <&spdif_bus>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s0: i2s@ff880000 {
- compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff880000 0x0 0x1000>;
- rockchip,grf = <&grf>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 0>, <&dmac_bus 1>;
- dma-names = "tx", "rx";
- clock-names = "i2s_clk", "i2s_hclk";
- clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>;
- pinctrl-names = "bclk_on", "bclk_off";
- pinctrl-0 = <&i2s0_8ch_bus>;
- pinctrl-1 = <&i2s0_8ch_bus_bclk_off>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s1: i2s@ff890000 {
- compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff890000 0x0 0x1000>;
- interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 2>, <&dmac_bus 3>;
- dma-names = "tx", "rx";
- clock-names = "i2s_clk", "i2s_hclk";
- clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2s1_2ch_bus>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- i2s2: i2s@ff8a0000 {
- compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s";
- reg = <0x0 0xff8a0000 0x0 0x1000>;
- interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>;
- dmas = <&dmac_bus 4>, <&dmac_bus 5>;
- dma-names = "tx", "rx";
- clock-names = "i2s_clk", "i2s_hclk";
- clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>;
- power-domains = <&power RK3399_PD_SDIOAUDIO>;
- #sound-dai-cells = <0>;
- status = "disabled";
- };
-
- vopl: vop@ff8f0000 {
- compatible = "rockchip,rk3399-vop-lit";
- reg = <0x0 0xff8f0000 0x0 0x2000>, <0x0 0xff8f2000 0x0 0x400>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
- assigned-clock-rates = <400000000>, <100000000>;
- clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>;
- clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
- iommus = <&vopl_mmu>;
- power-domains = <&power RK3399_PD_VOPL>;
- resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>;
- reset-names = "axi", "ahb", "dclk";
- status = "disabled";
-
- vopl_out: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vopl_out_mipi: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&mipi_in_vopl>;
- };
-
- vopl_out_edp: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&edp_in_vopl>;
- };
-
- vopl_out_hdmi: endpoint@2 {
- reg = <2>;
- remote-endpoint = <&hdmi_in_vopl>;
- };
-
- vopl_out_mipi1: endpoint@3 {
- reg = <3>;
- remote-endpoint = <&mipi1_in_vopl>;
- };
-
- vopl_out_dp: endpoint@4 {
- reg = <4>;
- remote-endpoint = <&dp_in_vopl>;
- };
- };
- };
-
- vopl_mmu: iommu@ff8f3f00 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff8f3f00 0x0 0x100>;
- interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VOP1>, <&cru HCLK_VOP1>;
- clock-names = "aclk", "iface";
- power-domains = <&power RK3399_PD_VOPL>;
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- vopb: vop@ff900000 {
- compatible = "rockchip,rk3399-vop-big";
- reg = <0x0 0xff900000 0x0 0x2000>, <0x0 0xff902000 0x0 0x1000>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
- assigned-clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
- assigned-clock-rates = <400000000>, <100000000>;
- clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>;
- clock-names = "aclk_vop", "dclk_vop", "hclk_vop";
- iommus = <&vopb_mmu>;
- power-domains = <&power RK3399_PD_VOPB>;
- resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>;
- reset-names = "axi", "ahb", "dclk";
- status = "disabled";
-
- vopb_out: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- vopb_out_edp: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&edp_in_vopb>;
- };
-
- vopb_out_mipi: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&mipi_in_vopb>;
- };
-
- vopb_out_hdmi: endpoint@2 {
- reg = <2>;
- remote-endpoint = <&hdmi_in_vopb>;
- };
-
- vopb_out_mipi1: endpoint@3 {
- reg = <3>;
- remote-endpoint = <&mipi1_in_vopb>;
- };
-
- vopb_out_dp: endpoint@4 {
- reg = <4>;
- remote-endpoint = <&dp_in_vopb>;
- };
- };
- };
-
- vopb_mmu: iommu@ff903f00 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff903f00 0x0 0x100>;
- interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_VOP0>, <&cru HCLK_VOP0>;
- clock-names = "aclk", "iface";
- power-domains = <&power RK3399_PD_VOPB>;
- #iommu-cells = <0>;
- status = "disabled";
- };
-
- isp0: isp0@ff910000 {
- compatible = "rockchip,rk3399-cif-isp";
- reg = <0x0 0xff910000 0x0 0x4000>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_ISP0>,
- <&cru ACLK_ISP0_WRAPPER>,
- <&cru HCLK_ISP0_WRAPPER>;
- clock-names = "isp", "aclk", "hclk";
- iommus = <&isp0_mmu>;
- phys = <&mipi_dphy_rx0>;
- phy-names = "dphy";
- power-domains = <&power RK3399_PD_ISP0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- };
-
- isp0_mmu: iommu@ff914000 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff914000 0x0 0x100>, <0x0 0xff915000 0x0 0x100>;
- interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_ISP0_WRAPPER>, <&cru HCLK_ISP0_WRAPPER>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power RK3399_PD_ISP0>;
- rockchip,disable-mmu-reset;
- };
-
- isp1: isp1@ff920000 {
- compatible = "rockchip,rk3399-cif-isp";
- reg = <0x0 0xff920000 0x0 0x4000>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_ISP1>,
- <&cru ACLK_ISP1_WRAPPER>,
- <&cru HCLK_ISP1_WRAPPER>;
- clock-names = "isp", "aclk", "hclk";
- iommus = <&isp1_mmu>;
- phys = <&mipi_dsi1>;
- phy-names = "dphy";
- power-domains = <&power RK3399_PD_ISP1>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- };
- };
- };
-
- isp1_mmu: iommu@ff924000 {
- compatible = "rockchip,iommu";
- reg = <0x0 0xff924000 0x0 0x100>, <0x0 0xff925000 0x0 0x100>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru ACLK_ISP1_WRAPPER>, <&cru HCLK_ISP1_WRAPPER>;
- clock-names = "aclk", "iface";
- #iommu-cells = <0>;
- power-domains = <&power RK3399_PD_ISP1>;
- rockchip,disable-mmu-reset;
- };
-
- hdmi_sound: hdmi-sound {
- compatible = "simple-audio-card";
- simple-audio-card,format = "i2s";
- simple-audio-card,mclk-fs = <256>;
- simple-audio-card,name = "hdmi-sound";
- status = "disabled";
-
- simple-audio-card,cpu {
- sound-dai = <&i2s2>;
- };
- simple-audio-card,codec {
- sound-dai = <&hdmi>;
- };
- };
-
- hdmi: hdmi@ff940000 {
- compatible = "rockchip,rk3399-dw-hdmi";
- reg = <0x0 0xff940000 0x0 0x20000>;
- interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_HDMI_CTRL>,
- <&cru SCLK_HDMI_SFR>,
- <&cru SCLK_HDMI_CEC>,
- <&cru PCLK_VIO_GRF>,
- <&cru PLL_VPLL>;
- clock-names = "iahb", "isfr", "cec", "grf", "ref";
- power-domains = <&power RK3399_PD_HDCP>;
- reg-io-width = <4>;
- rockchip,grf = <&grf>;
- #sound-dai-cells = <0>;
- status = "disabled";
-
- ports {
- hdmi_in: port {
- #address-cells = <1>;
- #size-cells = <0>;
-
- hdmi_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_hdmi>;
- };
- hdmi_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_hdmi>;
- };
- };
- };
- };
-
- mipi_dsi: dsi@ff960000 {
- compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0x0 0xff960000 0x0 0x8000>;
- interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI0>,
- <&cru SCLK_DPHY_TX0_CFG>, <&cru PCLK_VIO_GRF>;
- clock-names = "ref", "pclk", "phy_cfg", "grf";
- power-domains = <&power RK3399_PD_VIO>;
- resets = <&cru SRST_P_MIPI_DSI0>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_mipi>;
- };
-
- mipi_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_mipi>;
- };
- };
-
- mipi_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- mipi_dsi1: dsi@ff968000 {
- compatible = "rockchip,rk3399-mipi-dsi", "snps,dw-mipi-dsi";
- reg = <0x0 0xff968000 0x0 0x8000>;
- interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_DPHY_PLL>, <&cru PCLK_MIPI_DSI1>,
- <&cru SCLK_DPHY_TX1RX1_CFG>, <&cru PCLK_VIO_GRF>;
- clock-names = "ref", "pclk", "phy_cfg", "grf";
- power-domains = <&power RK3399_PD_VIO>;
- resets = <&cru SRST_P_MIPI_DSI1>;
- reset-names = "apb";
- rockchip,grf = <&grf>;
- #address-cells = <1>;
- #size-cells = <0>;
- #phy-cells = <0>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi1_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- mipi1_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_mipi1>;
- };
-
- mipi1_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_mipi1>;
- };
- };
-
- mipi1_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- edp: dp@ff970000 {
- compatible = "rockchip,rk3399-edp";
- reg = <0x0 0xff970000 0x0 0x8000>;
- interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>;
- clock-names = "dp", "pclk", "grf";
- pinctrl-names = "default";
- pinctrl-0 = <&edp_hpd>;
- power-domains = <&power RK3399_PD_EDP>;
- resets = <&cru SRST_P_EDP_CTRL>;
- reset-names = "dp";
- rockchip,grf = <&grf>;
- status = "disabled";
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_in: port@0 {
- reg = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- edp_in_vopb: endpoint@0 {
- reg = <0>;
- remote-endpoint = <&vopb_out_edp>;
- };
-
- edp_in_vopl: endpoint@1 {
- reg = <1>;
- remote-endpoint = <&vopl_out_edp>;
- };
- };
-
- edp_out: port@1 {
- reg = <1>;
- };
- };
- };
-
- gpu: gpu@ff9a0000 {
- compatible = "rockchip,rk3399-mali", "arm,mali-t860";
- reg = <0x0 0xff9a0000 0x0 0x10000>;
- interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>,
- <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
- interrupt-names = "job", "mmu", "gpu";
- clocks = <&cru ACLK_GPU>;
- #cooling-cells = <2>;
- dynamic-power-coefficient = <2640>;
- power-domains = <&power RK3399_PD_GPU>;
- status = "disabled";
- };
-
- pinctrl: pinctrl {
- compatible = "rockchip,rk3399-pinctrl";
- rockchip,grf = <&grf>;
- rockchip,pmu = <&pmugrf>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- gpio0: gpio@ff720000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff720000 0x0 0x100>;
- clocks = <&pmucru PCLK_GPIO0_PMU>;
- interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio1: gpio@ff730000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff730000 0x0 0x100>;
- clocks = <&pmucru PCLK_GPIO1_PMU>;
- interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio2: gpio@ff780000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff780000 0x0 0x100>;
- clocks = <&cru PCLK_GPIO2>;
- interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio3: gpio@ff788000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff788000 0x0 0x100>;
- clocks = <&cru PCLK_GPIO3>;
- interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- gpio4: gpio@ff790000 {
- compatible = "rockchip,gpio-bank";
- reg = <0x0 0xff790000 0x0 0x100>;
- clocks = <&cru PCLK_GPIO4>;
- interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>;
-
- gpio-controller;
- #gpio-cells = <0x2>;
-
- interrupt-controller;
- #interrupt-cells = <0x2>;
- };
-
- pcfg_pull_up: pcfg-pull-up {
- bias-pull-up;
- };
-
- pcfg_pull_down: pcfg-pull-down {
- bias-pull-down;
- };
-
- pcfg_pull_none: pcfg-pull-none {
- bias-disable;
- };
-
- pcfg_pull_none_12ma: pcfg-pull-none-12ma {
- bias-disable;
- drive-strength = <12>;
- };
-
- pcfg_pull_none_13ma: pcfg-pull-none-13ma {
- bias-disable;
- drive-strength = <13>;
- };
-
- pcfg_pull_none_18ma: pcfg-pull-none-18ma {
- bias-disable;
- drive-strength = <18>;
- };
-
- pcfg_pull_none_20ma: pcfg-pull-none-20ma {
- bias-disable;
- drive-strength = <20>;
- };
-
- pcfg_pull_up_2ma: pcfg-pull-up-2ma {
- bias-pull-up;
- drive-strength = <2>;
- };
-
- pcfg_pull_up_8ma: pcfg-pull-up-8ma {
- bias-pull-up;
- drive-strength = <8>;
- };
-
- pcfg_pull_up_18ma: pcfg-pull-up-18ma {
- bias-pull-up;
- drive-strength = <18>;
- };
-
- pcfg_pull_up_20ma: pcfg-pull-up-20ma {
- bias-pull-up;
- drive-strength = <20>;
- };
-
- pcfg_pull_down_4ma: pcfg-pull-down-4ma {
- bias-pull-down;
- drive-strength = <4>;
- };
-
- pcfg_pull_down_8ma: pcfg-pull-down-8ma {
- bias-pull-down;
- drive-strength = <8>;
- };
-
- pcfg_pull_down_12ma: pcfg-pull-down-12ma {
- bias-pull-down;
- drive-strength = <12>;
- };
-
- pcfg_pull_down_18ma: pcfg-pull-down-18ma {
- bias-pull-down;
- drive-strength = <18>;
- };
-
- pcfg_pull_down_20ma: pcfg-pull-down-20ma {
- bias-pull-down;
- drive-strength = <20>;
- };
-
- pcfg_output_high: pcfg-output-high {
- output-high;
- };
-
- pcfg_output_low: pcfg-output-low {
- output-low;
- };
-
- pcfg_input_enable: pcfg-input-enable {
- input-enable;
- };
-
- pcfg_input_pull_up: pcfg-input-pull-up {
- input-enable;
- bias-pull-up;
- };
-
- pcfg_input_pull_down: pcfg-input-pull-down {
- input-enable;
- bias-pull-down;
- };
-
- clock {
- clk_32k: clk-32k {
- rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>;
- };
- };
-
- cif {
- cif_clkin: cif-clkin {
- rockchip,pins =
- <2 RK_PB2 3 &pcfg_pull_none>;
- };
-
- cif_clkouta: cif-clkouta {
- rockchip,pins =
- <2 RK_PB3 3 &pcfg_pull_none>;
- };
- };
-
- edp {
- edp_hpd: edp-hpd {
- rockchip,pins =
- <4 RK_PC7 2 &pcfg_pull_none>;
- };
- };
-
- gmac {
- rgmii_pins: rgmii-pins {
- rockchip,pins =
- /* mac_txclk */
- <3 RK_PC1 1 &pcfg_pull_none_13ma>,
- /* mac_rxclk */
- <3 RK_PB6 1 &pcfg_pull_none>,
- /* mac_mdio */
- <3 RK_PB5 1 &pcfg_pull_none>,
- /* mac_txen */
- <3 RK_PB4 1 &pcfg_pull_none_13ma>,
- /* mac_clk */
- <3 RK_PB3 1 &pcfg_pull_none>,
- /* mac_rxdv */
- <3 RK_PB1 1 &pcfg_pull_none>,
- /* mac_mdc */
- <3 RK_PB0 1 &pcfg_pull_none>,
- /* mac_rxd1 */
- <3 RK_PA7 1 &pcfg_pull_none>,
- /* mac_rxd0 */
- <3 RK_PA6 1 &pcfg_pull_none>,
- /* mac_txd1 */
- <3 RK_PA5 1 &pcfg_pull_none_13ma>,
- /* mac_txd0 */
- <3 RK_PA4 1 &pcfg_pull_none_13ma>,
- /* mac_rxd3 */
- <3 RK_PA3 1 &pcfg_pull_none>,
- /* mac_rxd2 */
- <3 RK_PA2 1 &pcfg_pull_none>,
- /* mac_txd3 */
- <3 RK_PA1 1 &pcfg_pull_none_13ma>,
- /* mac_txd2 */
- <3 RK_PA0 1 &pcfg_pull_none_13ma>;
- };
-
- rmii_pins: rmii-pins {
- rockchip,pins =
- /* mac_mdio */
- <3 RK_PB5 1 &pcfg_pull_none>,
- /* mac_txen */
- <3 RK_PB4 1 &pcfg_pull_none_13ma>,
- /* mac_clk */
- <3 RK_PB3 1 &pcfg_pull_none>,
- /* mac_rxer */
- <3 RK_PB2 1 &pcfg_pull_none>,
- /* mac_rxdv */
- <3 RK_PB1 1 &pcfg_pull_none>,
- /* mac_mdc */
- <3 RK_PB0 1 &pcfg_pull_none>,
- /* mac_rxd1 */
- <3 RK_PA7 1 &pcfg_pull_none>,
- /* mac_rxd0 */
- <3 RK_PA6 1 &pcfg_pull_none>,
- /* mac_txd1 */
- <3 RK_PA5 1 &pcfg_pull_none_13ma>,
- /* mac_txd0 */
- <3 RK_PA4 1 &pcfg_pull_none_13ma>;
- };
- };
-
- i2c0 {
- i2c0_xfer: i2c0-xfer {
- rockchip,pins =
- <1 RK_PB7 2 &pcfg_pull_none>,
- <1 RK_PC0 2 &pcfg_pull_none>;
- };
- };
-
- i2c1 {
- i2c1_xfer: i2c1-xfer {
- rockchip,pins =
- <4 RK_PA2 1 &pcfg_pull_none>,
- <4 RK_PA1 1 &pcfg_pull_none>;
- };
- };
-
- i2c2 {
- i2c2_xfer: i2c2-xfer {
- rockchip,pins =
- <2 RK_PA1 2 &pcfg_pull_none_12ma>,
- <2 RK_PA0 2 &pcfg_pull_none_12ma>;
- };
- };
-
- i2c3 {
- i2c3_xfer: i2c3-xfer {
- rockchip,pins =
- <4 RK_PC1 1 &pcfg_pull_none>,
- <4 RK_PC0 1 &pcfg_pull_none>;
- };
- };
-
- i2c4 {
- i2c4_xfer: i2c4-xfer {
- rockchip,pins =
- <1 RK_PB4 1 &pcfg_pull_none>,
- <1 RK_PB3 1 &pcfg_pull_none>;
- };
- };
-
- i2c5 {
- i2c5_xfer: i2c5-xfer {
- rockchip,pins =
- <3 RK_PB3 2 &pcfg_pull_none>,
- <3 RK_PB2 2 &pcfg_pull_none>;
- };
- };
-
- i2c6 {
- i2c6_xfer: i2c6-xfer {
- rockchip,pins =
- <2 RK_PB2 2 &pcfg_pull_none>,
- <2 RK_PB1 2 &pcfg_pull_none>;
- };
- };
-
- i2c7 {
- i2c7_xfer: i2c7-xfer {
- rockchip,pins =
- <2 RK_PB0 2 &pcfg_pull_none>,
- <2 RK_PA7 2 &pcfg_pull_none>;
- };
- };
-
- i2c8 {
- i2c8_xfer: i2c8-xfer {
- rockchip,pins =
- <1 RK_PC5 1 &pcfg_pull_none>,
- <1 RK_PC4 1 &pcfg_pull_none>;
- };
- };
-
- i2s0 {
- i2s0_2ch_bus: i2s0-2ch-bus {
- rockchip,pins =
- <3 RK_PD0 1 &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
-
- i2s0_2ch_bus_bclk_off: i2s0-2ch-bus-bclk-off {
- rockchip,pins =
- <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
-
- i2s0_8ch_bus: i2s0-8ch-bus {
- rockchip,pins =
- <3 RK_PD0 1 &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD4 1 &pcfg_pull_none>,
- <3 RK_PD5 1 &pcfg_pull_none>,
- <3 RK_PD6 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
-
- i2s0_8ch_bus_bclk_off: i2s0-8ch-bus-bclk-off {
- rockchip,pins =
- <3 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>,
- <3 RK_PD1 1 &pcfg_pull_none>,
- <3 RK_PD2 1 &pcfg_pull_none>,
- <3 RK_PD3 1 &pcfg_pull_none>,
- <3 RK_PD4 1 &pcfg_pull_none>,
- <3 RK_PD5 1 &pcfg_pull_none>,
- <3 RK_PD6 1 &pcfg_pull_none>,
- <3 RK_PD7 1 &pcfg_pull_none>,
- <4 RK_PA0 1 &pcfg_pull_none>;
- };
- };
-
- i2s1 {
- i2s1_2ch_bus: i2s1-2ch-bus {
- rockchip,pins =
- <4 RK_PA3 1 &pcfg_pull_none>,
- <4 RK_PA4 1 &pcfg_pull_none>,
- <4 RK_PA5 1 &pcfg_pull_none>,
- <4 RK_PA6 1 &pcfg_pull_none>,
- <4 RK_PA7 1 &pcfg_pull_none>;
- };
-
- i2s1_2ch_bus_bclk_off: i2s1-2ch-bus-bclk-off {
- rockchip,pins =
- <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>,
- <4 RK_PA4 1 &pcfg_pull_none>,
- <4 RK_PA5 1 &pcfg_pull_none>,
- <4 RK_PA6 1 &pcfg_pull_none>,
- <4 RK_PA7 1 &pcfg_pull_none>;
- };
- };
-
- sdio0 {
- sdio0_bus1: sdio0-bus1 {
- rockchip,pins =
- <2 RK_PC4 1 &pcfg_pull_up>;
- };
-
- sdio0_bus4: sdio0-bus4 {
- rockchip,pins =
- <2 RK_PC4 1 &pcfg_pull_up>,
- <2 RK_PC5 1 &pcfg_pull_up>,
- <2 RK_PC6 1 &pcfg_pull_up>,
- <2 RK_PC7 1 &pcfg_pull_up>;
- };
-
- sdio0_cmd: sdio0-cmd {
- rockchip,pins =
- <2 RK_PD0 1 &pcfg_pull_up>;
- };
-
- sdio0_clk: sdio0-clk {
- rockchip,pins =
- <2 RK_PD1 1 &pcfg_pull_none>;
- };
-
- sdio0_cd: sdio0-cd {
- rockchip,pins =
- <2 RK_PD2 1 &pcfg_pull_up>;
- };
-
- sdio0_pwr: sdio0-pwr {
- rockchip,pins =
- <2 RK_PD3 1 &pcfg_pull_up>;
- };
-
- sdio0_bkpwr: sdio0-bkpwr {
- rockchip,pins =
- <2 RK_PD4 1 &pcfg_pull_up>;
- };
-
- sdio0_wp: sdio0-wp {
- rockchip,pins =
- <0 RK_PA3 1 &pcfg_pull_up>;
- };
-
- sdio0_int: sdio0-int {
- rockchip,pins =
- <0 RK_PA4 1 &pcfg_pull_up>;
- };
- };
-
- sdmmc {
- sdmmc_bus1: sdmmc-bus1 {
- rockchip,pins =
- <4 RK_PB0 1 &pcfg_pull_up>;
- };
-
- sdmmc_bus4: sdmmc-bus4 {
- rockchip,pins =
- <4 RK_PB0 1 &pcfg_pull_up>,
- <4 RK_PB1 1 &pcfg_pull_up>,
- <4 RK_PB2 1 &pcfg_pull_up>,
- <4 RK_PB3 1 &pcfg_pull_up>;
- };
-
- sdmmc_clk: sdmmc-clk {
- rockchip,pins =
- <4 RK_PB4 1 &pcfg_pull_none>;
- };
-
- sdmmc_cmd: sdmmc-cmd {
- rockchip,pins =
- <4 RK_PB5 1 &pcfg_pull_up>;
- };
-
- sdmmc_cd: sdmmc-cd {
- rockchip,pins =
- <0 RK_PA7 1 &pcfg_pull_up>;
- };
-
- sdmmc_wp: sdmmc-wp {
- rockchip,pins =
- <0 RK_PB0 1 &pcfg_pull_up>;
- };
- };
-
- suspend {
- ap_pwroff: ap-pwroff {
- rockchip,pins = <1 RK_PA5 1 &pcfg_pull_none>;
- };
-
- ddrio_pwroff: ddrio-pwroff {
- rockchip,pins = <0 RK_PA1 1 &pcfg_pull_none>;
- };
- };
-
- spdif {
- spdif_bus: spdif-bus {
- rockchip,pins =
- <4 RK_PC5 1 &pcfg_pull_none>;
- };
-
- spdif_bus_1: spdif-bus-1 {
- rockchip,pins =
- <3 RK_PC0 3 &pcfg_pull_none>;
- };
- };
-
- spi0 {
- spi0_clk: spi0-clk {
- rockchip,pins =
- <3 RK_PA6 2 &pcfg_pull_up>;
- };
- spi0_cs0: spi0-cs0 {
- rockchip,pins =
- <3 RK_PA7 2 &pcfg_pull_up>;
- };
- spi0_cs1: spi0-cs1 {
- rockchip,pins =
- <3 RK_PB0 2 &pcfg_pull_up>;
- };
- spi0_tx: spi0-tx {
- rockchip,pins =
- <3 RK_PA5 2 &pcfg_pull_up>;
- };
- spi0_rx: spi0-rx {
- rockchip,pins =
- <3 RK_PA4 2 &pcfg_pull_up>;
- };
- };
-
- spi1 {
- spi1_clk: spi1-clk {
- rockchip,pins =
- <1 RK_PB1 2 &pcfg_pull_up>;
- };
- spi1_cs0: spi1-cs0 {
- rockchip,pins =
- <1 RK_PB2 2 &pcfg_pull_up>;
- };
- spi1_rx: spi1-rx {
- rockchip,pins =
- <1 RK_PA7 2 &pcfg_pull_up>;
- };
- spi1_tx: spi1-tx {
- rockchip,pins =
- <1 RK_PB0 2 &pcfg_pull_up>;
- };
- };
-
- spi2 {
- spi2_clk: spi2-clk {
- rockchip,pins =
- <2 RK_PB3 1 &pcfg_pull_up>;
- };
- spi2_cs0: spi2-cs0 {
- rockchip,pins =
- <2 RK_PB4 1 &pcfg_pull_up>;
- };
- spi2_rx: spi2-rx {
- rockchip,pins =
- <2 RK_PB1 1 &pcfg_pull_up>;
- };
- spi2_tx: spi2-tx {
- rockchip,pins =
- <2 RK_PB2 1 &pcfg_pull_up>;
- };
- };
-
- spi3 {
- spi3_clk: spi3-clk {
- rockchip,pins =
- <1 RK_PC1 1 &pcfg_pull_up>;
- };
- spi3_cs0: spi3-cs0 {
- rockchip,pins =
- <1 RK_PC2 1 &pcfg_pull_up>;
- };
- spi3_rx: spi3-rx {
- rockchip,pins =
- <1 RK_PB7 1 &pcfg_pull_up>;
- };
- spi3_tx: spi3-tx {
- rockchip,pins =
- <1 RK_PC0 1 &pcfg_pull_up>;
- };
- };
-
- spi4 {
- spi4_clk: spi4-clk {
- rockchip,pins =
- <3 RK_PA2 2 &pcfg_pull_up>;
- };
- spi4_cs0: spi4-cs0 {
- rockchip,pins =
- <3 RK_PA3 2 &pcfg_pull_up>;
- };
- spi4_rx: spi4-rx {
- rockchip,pins =
- <3 RK_PA0 2 &pcfg_pull_up>;
- };
- spi4_tx: spi4-tx {
- rockchip,pins =
- <3 RK_PA1 2 &pcfg_pull_up>;
- };
- };
-
- spi5 {
- spi5_clk: spi5-clk {
- rockchip,pins =
- <2 RK_PC6 2 &pcfg_pull_up>;
- };
- spi5_cs0: spi5-cs0 {
- rockchip,pins =
- <2 RK_PC7 2 &pcfg_pull_up>;
- };
- spi5_rx: spi5-rx {
- rockchip,pins =
- <2 RK_PC4 2 &pcfg_pull_up>;
- };
- spi5_tx: spi5-tx {
- rockchip,pins =
- <2 RK_PC5 2 &pcfg_pull_up>;
- };
- };
-
- testclk {
- test_clkout0: test-clkout0 {
- rockchip,pins =
- <0 RK_PA0 1 &pcfg_pull_none>;
- };
-
- test_clkout1: test-clkout1 {
- rockchip,pins =
- <2 RK_PD1 2 &pcfg_pull_none>;
- };
-
- test_clkout2: test-clkout2 {
- rockchip,pins =
- <0 RK_PB0 3 &pcfg_pull_none>;
- };
- };
-
- tsadc {
- otp_pin: otp-pin {
- rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- otp_out: otp-out {
- rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none>;
- };
- };
-
- uart0 {
- uart0_xfer: uart0-xfer {
- rockchip,pins =
- <2 RK_PC0 1 &pcfg_pull_up>,
- <2 RK_PC1 1 &pcfg_pull_none>;
- };
-
- uart0_cts: uart0-cts {
- rockchip,pins =
- <2 RK_PC2 1 &pcfg_pull_none>;
- };
-
- uart0_rts: uart0-rts {
- rockchip,pins =
- <2 RK_PC3 1 &pcfg_pull_none>;
- };
- };
-
- uart1 {
- uart1_xfer: uart1-xfer {
- rockchip,pins =
- <3 RK_PB4 2 &pcfg_pull_up>,
- <3 RK_PB5 2 &pcfg_pull_none>;
- };
- };
-
- uart2a {
- uart2a_xfer: uart2a-xfer {
- rockchip,pins =
- <4 RK_PB0 2 &pcfg_pull_up>,
- <4 RK_PB1 2 &pcfg_pull_none>;
- };
- };
-
- uart2b {
- uart2b_xfer: uart2b-xfer {
- rockchip,pins =
- <4 RK_PC0 2 &pcfg_pull_up>,
- <4 RK_PC1 2 &pcfg_pull_none>;
- };
- };
-
- uart2c {
- uart2c_xfer: uart2c-xfer {
- rockchip,pins =
- <4 RK_PC3 1 &pcfg_pull_up>,
- <4 RK_PC4 1 &pcfg_pull_none>;
- };
- };
-
- uart3 {
- uart3_xfer: uart3-xfer {
- rockchip,pins =
- <3 RK_PB6 2 &pcfg_pull_up>,
- <3 RK_PB7 2 &pcfg_pull_none>;
- };
-
- uart3_cts: uart3-cts {
- rockchip,pins =
- <3 RK_PC0 2 &pcfg_pull_none>;
- };
-
- uart3_rts: uart3-rts {
- rockchip,pins =
- <3 RK_PC1 2 &pcfg_pull_none>;
- };
- };
-
- uart4 {
- uart4_xfer: uart4-xfer {
- rockchip,pins =
- <1 RK_PA7 1 &pcfg_pull_up>,
- <1 RK_PB0 1 &pcfg_pull_none>;
- };
- };
-
- uarthdcp {
- uarthdcp_xfer: uarthdcp-xfer {
- rockchip,pins =
- <4 RK_PC5 2 &pcfg_pull_up>,
- <4 RK_PC6 2 &pcfg_pull_none>;
- };
- };
-
- pwm0 {
- pwm0_pin: pwm0-pin {
- rockchip,pins =
- <4 RK_PC2 1 &pcfg_pull_none>;
- };
-
- pwm0_pin_pull_down: pwm0-pin-pull-down {
- rockchip,pins =
- <4 RK_PC2 1 &pcfg_pull_down>;
- };
-
- vop0_pwm_pin: vop0-pwm-pin {
- rockchip,pins =
- <4 RK_PC2 2 &pcfg_pull_none>;
- };
-
- vop1_pwm_pin: vop1-pwm-pin {
- rockchip,pins =
- <4 RK_PC2 3 &pcfg_pull_none>;
- };
- };
-
- pwm1 {
- pwm1_pin: pwm1-pin {
- rockchip,pins =
- <4 RK_PC6 1 &pcfg_pull_none>;
- };
-
- pwm1_pin_pull_down: pwm1-pin-pull-down {
- rockchip,pins =
- <4 RK_PC6 1 &pcfg_pull_down>;
- };
- };
-
- pwm2 {
- pwm2_pin: pwm2-pin {
- rockchip,pins =
- <1 RK_PC3 1 &pcfg_pull_none>;
- };
-
- pwm2_pin_pull_down: pwm2-pin-pull-down {
- rockchip,pins =
- <1 RK_PC3 1 &pcfg_pull_down>;
- };
- };
-
- pwm3a {
- pwm3a_pin: pwm3a-pin {
- rockchip,pins =
- <0 RK_PA6 1 &pcfg_pull_none>;
- };
- };
-
- pwm3b {
- pwm3b_pin: pwm3b-pin {
- rockchip,pins =
- <1 RK_PB6 1 &pcfg_pull_none>;
- };
- };
-
- hdmi {
- hdmi_i2c_xfer: hdmi-i2c-xfer {
- rockchip,pins =
- <4 RK_PC1 3 &pcfg_pull_none>,
- <4 RK_PC0 3 &pcfg_pull_none>;
- };
-
- hdmi_cec: hdmi-cec {
- rockchip,pins =
- <4 RK_PC7 1 &pcfg_pull_none>;
- };
- };
-
- pcie {
- pcie_clkreqn_cpm: pci-clkreqn-cpm {
- rockchip,pins =
- <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
- };
-
- pcie_clkreqnb_cpm: pci-clkreqnb-cpm {
- rockchip,pins =
- <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Radxa Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-/dts-v1/;
-#include "rk3399.dtsi"
-#include "rk3399-opp.dtsi"
-#include <rockchip-radxa-dalang-carrier.dtsi>
-#include "rk3399pro-vmarc-som.dtsi"
-
-/ {
- model = "Radxa ROCK Pi N10";
- compatible = "radxa,rockpi-n10", "vamrs,rk3399pro-vmarc-som",
- "rockchip,rk3399pro";
-
- chosen {
- stdout-path = "serial2:1500000n8";
- };
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd
- * Copyright (c) 2019 Vamrs Limited
- * Copyright (c) 2019 Amarula Solutions(India)
- */
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pinctrl/rockchip.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
- compatible = "vamrs,rk3399pro-vmarc-som", "rockchip,rk3399pro";
-
- aliases {
- ethernet0 = &gmac;
- mmc0 = &sdhci;
- mmc1 = &sdmmc;
- };
-
- vcc3v3_pcie: vcc-pcie-regulator {
- compatible = "regulator-fixed";
- enable-active-high;
- gpio = <&gpio4 RK_PD4 GPIO_ACTIVE_HIGH>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_pwr>;
- regulator-name = "vcc3v3_pcie";
- regulator-always-on;
- regulator-boot-on;
- vin-supply = <&vcc5v0_sys>;
- };
-};
-
-&cpu_l0 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l1 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l2 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&cpu_l3 {
- cpu-supply = <&vdd_cpu_l>;
-};
-
-&emmc_phy {
- status = "okay";
-};
-
-&gmac {
- assigned-clocks = <&cru SCLK_RMII_SRC>;
- phy-supply = <&vcc_lan>;
- snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
-};
-
-&hdmi {
- ddc-i2c-bus = <&i2c3>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_cec>;
-};
-
-&i2c0 {
- clock-frequency = <400000>;
- i2c-scl-falling-time-ns = <30>;
- i2c-scl-rising-time-ns = <180>;
- status = "okay";
-
- rk809: pmic@20 {
- compatible = "rockchip,rk809";
- reg = <0x20>;
- interrupt-parent = <&gpio1>;
- interrupts = <RK_PC2 IRQ_TYPE_LEVEL_LOW>;
- #clock-cells = <1>;
- clock-output-names = "rk808-clkout1", "rk808-clkout2";
- pinctrl-names = "default";
- pinctrl-0 = <&pmic_int_l>;
- rockchip,system-power-controller;
- wakeup-source;
-
- vcc1-supply = <&vcc5v0_sys>;
- vcc2-supply = <&vcc5v0_sys>;
- vcc3-supply = <&vcc5v0_sys>;
- vcc4-supply = <&vcc5v0_sys>;
- vcc5-supply = <&vcc_buck5>;
- vcc6-supply = <&vcc_buck5>;
- vcc7-supply = <&vcc5v0_sys>;
- vcc8-supply = <&vcc3v3_sys>;
- vcc9-supply = <&vcc5v0_sys>;
-
- regulators {
- vdd_log: DCDC_REG1 {
- regulator-name = "vdd_log";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-initial-mode = <0x2>;
- regulator-state-mem {
- regulator-off-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vdd_cpu_l: DCDC_REG2 {
- regulator-name = "vdd_cpu_l";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1350000>;
- regulator-ramp-delay = <6001>;
- regulator-initial-mode = <0x2>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_ddr: DCDC_REG3 {
- regulator-name = "vcc_ddr";
- regulator-always-on;
- regulator-boot-on;
- regulator-initial-mode = <0x2>;
- regulator-state-mem {
- regulator-on-in-suspend;
- };
- };
-
- vcc3v3_sys: DCDC_REG4 {
- regulator-name = "vcc3v3_sys";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-initial-mode = <0x2>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <3300000>;
- };
- };
-
- vcc_buck5: DCDC_REG5 {
- regulator-name = "vcc_buck5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <2200000>;
- regulator-max-microvolt = <2200000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <2200000>;
- };
- };
-
- vcca_0v9: LDO_REG1 {
- regulator-name = "vcca_0v9";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcc_1v8: LDO_REG2 {
- regulator-name = "vcc_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1800000>;
- };
- };
-
- vcc_0v9: LDO_REG3 {
- regulator-name = "vcc_0v9";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <900000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <900000>;
- };
- };
-
- vcca_1v8: LDO_REG4 {
- regulator-name = "vcca_1v8";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1850000>;
- regulator-max-microvolt = <1850000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <1850000>;
- };
- };
-
- /*
- * As per BSP, but schematic not showing any regulator
- * pin for LD05.
- */
- vdd1v5_dvp: LDO_REG5 {
- regulator-name = "vdd1v5_dvp";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc_1v5: LDO_REG6 {
- regulator-name = "vcc_1v5";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1500000>;
- regulator-max-microvolt = <1500000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_3v0: LDO_REG7 {
- regulator-name = "vccio_3v0";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vccio_sd: LDO_REG8 {
- regulator-name = "vccio_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- /*
- * As per BSP, but schematic not showing any regulator
- * pin for LD09.
- */
- vcc_sd: LDO_REG9 {
- regulator-name = "vcc_sd";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
-
- vcc5v0_usb2: SWITCH_REG1 {
- regulator-name = "vcc5v0_usb2";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- regulator-state-mem {
- regulator-on-in-suspend;
- regulator-suspend-microvolt = <5000000>;
- };
- };
-
- vccio_3v3: vcc_lan: SWITCH_REG2 {
- regulator-name = "vccio_3v3";
- regulator-always-on;
- regulator-boot-on;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-state-mem {
- regulator-off-in-suspend;
- };
- };
- };
- };
-};
-
-&i2c1 {
- i2c-scl-falling-time-ns = <30>;
- i2c-scl-rising-time-ns = <140>;
- status = "okay";
-};
-
-&i2c2 {
- clock-frequency = <400000>;
- status = "okay";
-
- hym8563: rtc@51 {
- compatible = "haoyu,hym8563";
- reg = <0x51>;
- #clock-cells = <0>;
- clock-output-names = "hym8563";
- pinctrl-names = "default";
- pinctrl-0 = <&hym8563_int>;
- interrupt-parent = <&gpio4>;
- interrupts = <RK_PD6 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&i2c3 {
- i2c-scl-rising-time-ns = <450>;
- i2c-scl-falling-time-ns = <15>;
- status = "okay";
-};
-
-&io_domains {
- status = "okay";
- bt656-supply = <&vcca_1v8>;
- gpio1830-supply = <&vccio_3v0>;
- sdmmc-supply = <&vccio_sd>;
-};
-
-&pcie_phy {
- status = "okay";
-};
-
-&pcie0 {
- ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-0 = <&pcie_clkreqnb_cpm>;
- pinctrl-names = "default";
- vpcie0v9-supply = <&vcca_0v9>; /* VCC_0V9_S0 */
- vpcie1v8-supply = <&vcca_1v8>; /* VCC_1V8_S0 */
- vpcie3v3-supply = <&vcc3v3_pcie>;
- status = "okay";
-};
-
-&pinctrl {
- hym8563 {
- hym8563_int: hym8563-int {
- rockchip,pins = <4 RK_PD6 0 &pcfg_pull_up>;
- };
- };
-
- pcie {
- pcie_pwr: pcie-pwr {
- rockchip,pins = <4 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- pmic {
- pmic_int_l: pmic-int-l {
- rockchip,pins = <1 RK_PC2 0 &pcfg_pull_up>;
- };
- };
-
- sdio-pwrseq {
- wifi_enable_h: wifi-enable-h {
- rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
- };
- };
-
- vbus_host {
- usb1_en_oc: usb1-en-oc {
- rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-
- vbus_typec {
- usb0_en_oc: usb0-en-oc {
- rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_up>;
- };
- };
-};
-
-&pmu_io_domains {
- status = "okay";
- pmu1830-supply = <&vcc_1v8>;
-};
-
-&sdio_pwrseq {
- /*
- * On the module itself this is one of these (depending
- * on the actual card populated):
- * - SDIO_RESET_L_WL_REG_ON
- * - PDN (power down when low)
- */
- reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
-};
-
-&sdhci {
- bus-width = <8>;
- mmc-hs400-1_8v;
- mmc-hs400-enhanced-strobe;
- non-removable;
- status = "okay";
-};
-
-&sdmmc {
- cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
- max-frequency = <150000000>;
-};
-
-&tcphy0 {
- status = "okay";
-};
-
-&tsadc {
- rockchip,hw-tshut-mode = <1>;
- rockchip,hw-tshut-polarity = <1>;
- status = "okay";
-};
-
-&u2phy0 {
- status = "okay";
-
- u2phy0_otg: otg-port {
- phy-supply = <&vbus_typec>;
- status = "okay";
- };
-
- u2phy0_host: host-port {
- phy-supply = <&vbus_host>;
- status = "okay";
- };
-};
-
-
-&u2phy1 {
- status = "okay";
-
- u2phy1_host: host-port {
- phy-supply = <&vbus_host>;
- status = "okay";
- };
-};
-
-&usb_host0_ehci {
- status = "okay";
-};
-
-&usb_host0_ohci {
- status = "okay";
-};
-
-&usb_host1_ehci {
- status = "okay";
-};
-
-&usb_host1_ohci {
- status = "okay";
-};
-
-&usbdrd3_0 {
- status = "okay";
-};
-
-&usbdrd_dwc3_0 {
- status = "okay";
-};
-
-&vbus_host {
- enable-active-high;
- gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>; /* USB1_EN_OC# */
- pinctrl-names = "default";
- pinctrl-0 = <&usb1_en_oc>;
-};
-
-&vbus_typec {
- enable-active-high;
- gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; /* USB0_EN_OC# */
- pinctrl-names = "default";
- pinctrl-0 = <&usb0_en_oc>;
-};
+++ /dev/null
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-// Copyright (c) 2019 Fuzhou Rockchip Electronics Co., Ltd.
-
-#include "rk3399.dtsi"
-
-/ {
- compatible = "rockchip,rk3399pro";
-};
-
-/* Default to enabled since AP talk to NPU part over pcie */
-&pcie_phy {
- status = "okay";
-};
-
-/* Default to enabled since AP talk to NPU part over pcie */
-&pcie0 {
- ep-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>;
- num-lanes = <4>;
- pinctrl-names = "default";
- pinctrl-0 = <&pcie_clkreqn_cpm>;
- status = "okay";
-};
+++ /dev/null
-Rockchip Dynamic Memory Controller Driver
-Required properties:
-- compatible: "rockchip,rk3399-dmc", "syscon"
-- rockchip,cru: this driver should access cru regs, so need get cru here
-- rockchip,pmucru: this driver should access pmucru regs, so need get pmucru here
-- rockchip,pmugrf: this driver should access pmugrf regs, so need get pmugrf here
-- rockchip,pmusgrf: this driver should access pmusgrf regs, so need get pmusgrf here
-- rockchip,cic: this driver should access cic regs, so need get cic here
-- reg: dynamic ram protocol controller(PCTL) address, PHY Independent(PI) address, phy controller(PHYCTL) address and memory schedule(MSCH) address
-- clock: must include clock specifiers corresponding to entries in the clock-names property.
- Must contain
- dmc_clk: for ddr working frequency
-- rockchip,sdram-params: SDRAM parameters, including all the information by ddr driver:
- Must contain
- Genarate by vendor tool and adjust for U-Boot dtsi.
-
-Example:
- dmc: dmc {
- bootph-all;
- compatible = "rockchip,rk3399-dmc";
- devfreq-events = <&dfi>;
- interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&cru SCLK_DDRCLK>;
- clock-names = "dmc_clk";
- reg = <0x0 0xffa80000 0x0 0x0800
- 0x0 0xffa80800 0x0 0x1800
- 0x0 0xffa82000 0x0 0x2000
- 0x0 0xffa84000 0x0 0x1000
- 0x0 0xffa88000 0x0 0x0800
- 0x0 0xffa88800 0x0 0x1800
- 0x0 0xffa8a000 0x0 0x2000
- 0x0 0xffa8c000 0x0 0x1000>;
- };
-
- &dmc {
- rockchip,sdram-params = <
- 0x2
- 0xa
- 0x3
- ...
- >;
- };
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Copyright (c) 2016 Rockchip Electronics Co. Ltd.
- * Author: Xing Zheng <zhengxing@rock-chips.com>
- */
-
-#ifndef _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H
-#define _DT_BINDINGS_CLK_ROCKCHIP_RK3399_H
-
-/* core clocks */
-#define PLL_APLLL 1
-#define PLL_APLLB 2
-#define PLL_DPLL 3
-#define PLL_CPLL 4
-#define PLL_GPLL 5
-#define PLL_NPLL 6
-#define PLL_VPLL 7
-#define ARMCLKL 8
-#define ARMCLKB 9
-
-/* sclk gates (special clocks) */
-#define SCLK_I2C1 65
-#define SCLK_I2C2 66
-#define SCLK_I2C3 67
-#define SCLK_I2C5 68
-#define SCLK_I2C6 69
-#define SCLK_I2C7 70
-#define SCLK_SPI0 71
-#define SCLK_SPI1 72
-#define SCLK_SPI2 73
-#define SCLK_SPI4 74
-#define SCLK_SPI5 75
-#define SCLK_SDMMC 76
-#define SCLK_SDIO 77
-#define SCLK_EMMC 78
-#define SCLK_TSADC 79
-#define SCLK_SARADC 80
-#define SCLK_UART0 81
-#define SCLK_UART1 82
-#define SCLK_UART2 83
-#define SCLK_UART3 84
-#define SCLK_SPDIF_8CH 85
-#define SCLK_I2S0_8CH 86
-#define SCLK_I2S1_8CH 87
-#define SCLK_I2S2_8CH 88
-#define SCLK_I2S_8CH_OUT 89
-#define SCLK_TIMER00 90
-#define SCLK_TIMER01 91
-#define SCLK_TIMER02 92
-#define SCLK_TIMER03 93
-#define SCLK_TIMER04 94
-#define SCLK_TIMER05 95
-#define SCLK_TIMER06 96
-#define SCLK_TIMER07 97
-#define SCLK_TIMER08 98
-#define SCLK_TIMER09 99
-#define SCLK_TIMER10 100
-#define SCLK_TIMER11 101
-#define SCLK_MACREF 102
-#define SCLK_MAC_RX 103
-#define SCLK_MAC_TX 104
-#define SCLK_MAC 105
-#define SCLK_MACREF_OUT 106
-#define SCLK_VOP0_PWM 107
-#define SCLK_VOP1_PWM 108
-#define SCLK_RGA_CORE 109
-#define SCLK_ISP0 110
-#define SCLK_ISP1 111
-#define SCLK_HDMI_CEC 112
-#define SCLK_HDMI_SFR 113
-#define SCLK_DP_CORE 114
-#define SCLK_PVTM_CORE_L 115
-#define SCLK_PVTM_CORE_B 116
-#define SCLK_PVTM_GPU 117
-#define SCLK_PVTM_DDR 118
-#define SCLK_MIPIDPHY_REF 119
-#define SCLK_MIPIDPHY_CFG 120
-#define SCLK_HSICPHY 121
-#define SCLK_USBPHY480M 122
-#define SCLK_USB2PHY0_REF 123
-#define SCLK_USB2PHY1_REF 124
-#define SCLK_UPHY0_TCPDPHY_REF 125
-#define SCLK_UPHY0_TCPDCORE 126
-#define SCLK_UPHY1_TCPDPHY_REF 127
-#define SCLK_UPHY1_TCPDCORE 128
-#define SCLK_USB3OTG0_REF 129
-#define SCLK_USB3OTG1_REF 130
-#define SCLK_USB3OTG0_SUSPEND 131
-#define SCLK_USB3OTG1_SUSPEND 132
-#define SCLK_CRYPTO0 133
-#define SCLK_CRYPTO1 134
-#define SCLK_CCI_TRACE 135
-#define SCLK_CS 136
-#define SCLK_CIF_OUT 137
-#define SCLK_PCIEPHY_REF 138
-#define SCLK_PCIE_CORE 139
-#define SCLK_M0_PERILP 140
-#define SCLK_M0_PERILP_DEC 141
-#define SCLK_CM0S 142
-#define SCLK_DBG_NOC 143
-#define SCLK_DBG_PD_CORE_B 144
-#define SCLK_DBG_PD_CORE_L 145
-#define SCLK_DFIMON0_TIMER 146
-#define SCLK_DFIMON1_TIMER 147
-#define SCLK_INTMEM0 148
-#define SCLK_INTMEM1 149
-#define SCLK_INTMEM2 150
-#define SCLK_INTMEM3 151
-#define SCLK_INTMEM4 152
-#define SCLK_INTMEM5 153
-#define SCLK_SDMMC_DRV 154
-#define SCLK_SDMMC_SAMPLE 155
-#define SCLK_SDIO_DRV 156
-#define SCLK_SDIO_SAMPLE 157
-#define SCLK_VDU_CORE 158
-#define SCLK_VDU_CA 159
-#define SCLK_PCIE_PM 160
-#define SCLK_SPDIF_REC_DPTX 161
-#define SCLK_DPHY_PLL 162
-#define SCLK_DPHY_TX0_CFG 163
-#define SCLK_DPHY_TX1RX1_CFG 164
-#define SCLK_DPHY_RX0_CFG 165
-#define SCLK_RMII_SRC 166
-#define SCLK_PCIEPHY_REF100M 167
-#define SCLK_DDRC 168
-#define SCLK_TESTCLKOUT1 169
-#define SCLK_TESTCLKOUT2 170
-
-#define DCLK_VOP0 180
-#define DCLK_VOP1 181
-#define DCLK_VOP0_DIV 182
-#define DCLK_VOP1_DIV 183
-#define DCLK_M0_PERILP 184
-#define DCLK_VOP0_FRAC 185
-#define DCLK_VOP1_FRAC 186
-
-#define FCLK_CM0S 190
-
-/* aclk gates */
-#define ACLK_PERIHP 192
-#define ACLK_PERIHP_NOC 193
-#define ACLK_PERILP0 194
-#define ACLK_PERILP0_NOC 195
-#define ACLK_PERF_PCIE 196
-#define ACLK_PCIE 197
-#define ACLK_INTMEM 198
-#define ACLK_TZMA 199
-#define ACLK_DCF 200
-#define ACLK_CCI 201
-#define ACLK_CCI_NOC0 202
-#define ACLK_CCI_NOC1 203
-#define ACLK_CCI_GRF 204
-#define ACLK_CENTER 205
-#define ACLK_CENTER_MAIN_NOC 206
-#define ACLK_CENTER_PERI_NOC 207
-#define ACLK_GPU 208
-#define ACLK_PERF_GPU 209
-#define ACLK_GPU_GRF 210
-#define ACLK_DMAC0_PERILP 211
-#define ACLK_DMAC1_PERILP 212
-#define ACLK_GMAC 213
-#define ACLK_GMAC_NOC 214
-#define ACLK_PERF_GMAC 215
-#define ACLK_VOP0_NOC 216
-#define ACLK_VOP0 217
-#define ACLK_VOP1_NOC 218
-#define ACLK_VOP1 219
-#define ACLK_RGA 220
-#define ACLK_RGA_NOC 221
-#define ACLK_HDCP 222
-#define ACLK_HDCP_NOC 223
-#define ACLK_HDCP22 224
-#define ACLK_IEP 225
-#define ACLK_IEP_NOC 226
-#define ACLK_VIO 227
-#define ACLK_VIO_NOC 228
-#define ACLK_ISP0 229
-#define ACLK_ISP1 230
-#define ACLK_ISP0_NOC 231
-#define ACLK_ISP1_NOC 232
-#define ACLK_ISP0_WRAPPER 233
-#define ACLK_ISP1_WRAPPER 234
-#define ACLK_VCODEC 235
-#define ACLK_VCODEC_NOC 236
-#define ACLK_VDU 237
-#define ACLK_VDU_NOC 238
-#define ACLK_PERI 239
-#define ACLK_EMMC 240
-#define ACLK_EMMC_CORE 241
-#define ACLK_EMMC_NOC 242
-#define ACLK_EMMC_GRF 243
-#define ACLK_USB3 244
-#define ACLK_USB3_NOC 245
-#define ACLK_USB3OTG0 246
-#define ACLK_USB3OTG1 247
-#define ACLK_USB3_RKSOC_AXI_PERF 248
-#define ACLK_USB3_GRF 249
-#define ACLK_GIC 250
-#define ACLK_GIC_NOC 251
-#define ACLK_GIC_ADB400_CORE_L_2_GIC 252
-#define ACLK_GIC_ADB400_CORE_B_2_GIC 253
-#define ACLK_GIC_ADB400_GIC_2_CORE_L 254
-#define ACLK_GIC_ADB400_GIC_2_CORE_B 255
-#define ACLK_CORE_ADB400_CORE_L_2_CCI500 256
-#define ACLK_CORE_ADB400_CORE_B_2_CCI500 257
-#define ACLK_ADB400M_PD_CORE_L 258
-#define ACLK_ADB400M_PD_CORE_B 259
-#define ACLK_PERF_CORE_L 260
-#define ACLK_PERF_CORE_B 261
-#define ACLK_GIC_PRE 262
-#define ACLK_VOP0_PRE 263
-#define ACLK_VOP1_PRE 264
-
-/* pclk gates */
-#define PCLK_PERIHP 320
-#define PCLK_PERIHP_NOC 321
-#define PCLK_PERILP0 322
-#define PCLK_PERILP1 323
-#define PCLK_PERILP1_NOC 324
-#define PCLK_PERILP_SGRF 325
-#define PCLK_PERIHP_GRF 326
-#define PCLK_PCIE 327
-#define PCLK_SGRF 328
-#define PCLK_INTR_ARB 329
-#define PCLK_CENTER_MAIN_NOC 330
-#define PCLK_CIC 331
-#define PCLK_COREDBG_B 332
-#define PCLK_COREDBG_L 333
-#define PCLK_DBG_CXCS_PD_CORE_B 334
-#define PCLK_DCF 335
-#define PCLK_GPIO2 336
-#define PCLK_GPIO3 337
-#define PCLK_GPIO4 338
-#define PCLK_GRF 339
-#define PCLK_HSICPHY 340
-#define PCLK_I2C1 341
-#define PCLK_I2C2 342
-#define PCLK_I2C3 343
-#define PCLK_I2C5 344
-#define PCLK_I2C6 345
-#define PCLK_I2C7 346
-#define PCLK_SPI0 347
-#define PCLK_SPI1 348
-#define PCLK_SPI2 349
-#define PCLK_SPI4 350
-#define PCLK_SPI5 351
-#define PCLK_UART0 352
-#define PCLK_UART1 353
-#define PCLK_UART2 354
-#define PCLK_UART3 355
-#define PCLK_TSADC 356
-#define PCLK_SARADC 357
-#define PCLK_GMAC 358
-#define PCLK_GMAC_NOC 359
-#define PCLK_TIMER0 360
-#define PCLK_TIMER1 361
-#define PCLK_EDP 362
-#define PCLK_EDP_NOC 363
-#define PCLK_EDP_CTRL 364
-#define PCLK_VIO 365
-#define PCLK_VIO_NOC 366
-#define PCLK_VIO_GRF 367
-#define PCLK_MIPI_DSI0 368
-#define PCLK_MIPI_DSI1 369
-#define PCLK_HDCP 370
-#define PCLK_HDCP_NOC 371
-#define PCLK_HDMI_CTRL 372
-#define PCLK_DP_CTRL 373
-#define PCLK_HDCP22 374
-#define PCLK_GASKET 375
-#define PCLK_DDR 376
-#define PCLK_DDR_MON 377
-#define PCLK_DDR_SGRF 378
-#define PCLK_ISP1_WRAPPER 379
-#define PCLK_WDT 380
-#define PCLK_EFUSE1024NS 381
-#define PCLK_EFUSE1024S 382
-#define PCLK_PMU_INTR_ARB 383
-#define PCLK_MAILBOX0 384
-#define PCLK_USBPHY_MUX_G 385
-#define PCLK_UPHY0_TCPHY_G 386
-#define PCLK_UPHY0_TCPD_G 387
-#define PCLK_UPHY1_TCPHY_G 388
-#define PCLK_UPHY1_TCPD_G 389
-#define PCLK_ALIVE 390
-
-/* hclk gates */
-#define HCLK_PERIHP 448
-#define HCLK_PERILP0 449
-#define HCLK_PERILP1 450
-#define HCLK_PERILP0_NOC 451
-#define HCLK_PERILP1_NOC 452
-#define HCLK_M0_PERILP 453
-#define HCLK_M0_PERILP_NOC 454
-#define HCLK_AHB1TOM 455
-#define HCLK_HOST0 456
-#define HCLK_HOST0_ARB 457
-#define HCLK_HOST1 458
-#define HCLK_HOST1_ARB 459
-#define HCLK_HSIC 460
-#define HCLK_SD 461
-#define HCLK_SDMMC 462
-#define HCLK_SDMMC_NOC 463
-#define HCLK_M_CRYPTO0 464
-#define HCLK_M_CRYPTO1 465
-#define HCLK_S_CRYPTO0 466
-#define HCLK_S_CRYPTO1 467
-#define HCLK_I2S0_8CH 468
-#define HCLK_I2S1_8CH 469
-#define HCLK_I2S2_8CH 470
-#define HCLK_SPDIF 471
-#define HCLK_VOP0_NOC 472
-#define HCLK_VOP0 473
-#define HCLK_VOP1_NOC 474
-#define HCLK_VOP1 475
-#define HCLK_ROM 476
-#define HCLK_IEP 477
-#define HCLK_IEP_NOC 478
-#define HCLK_ISP0 479
-#define HCLK_ISP1 480
-#define HCLK_ISP0_NOC 481
-#define HCLK_ISP1_NOC 482
-#define HCLK_ISP0_WRAPPER 483
-#define HCLK_ISP1_WRAPPER 484
-#define HCLK_RGA 485
-#define HCLK_RGA_NOC 486
-#define HCLK_HDCP 487
-#define HCLK_HDCP_NOC 488
-#define HCLK_HDCP22 489
-#define HCLK_VCODEC 490
-#define HCLK_VCODEC_NOC 491
-#define HCLK_VDU 492
-#define HCLK_VDU_NOC 493
-#define HCLK_SDIO 494
-#define HCLK_SDIO_NOC 495
-#define HCLK_SDIOAUDIO_NOC 496
-
-#define CLK_NR_CLKS (HCLK_SDIOAUDIO_NOC + 1)
-
-/* pmu-clocks indices */
-
-#define PLL_PPLL 1
-
-#define SCLK_32K_SUSPEND_PMU 2
-#define SCLK_SPI3_PMU 3
-#define SCLK_TIMER12_PMU 4
-#define SCLK_TIMER13_PMU 5
-#define SCLK_UART4_PMU 6
-#define SCLK_PVTM_PMU 7
-#define SCLK_WIFI_PMU 8
-#define SCLK_I2C0_PMU 9
-#define SCLK_I2C4_PMU 10
-#define SCLK_I2C8_PMU 11
-
-#define PCLK_SRC_PMU 19
-#define PCLK_PMU 20
-#define PCLK_PMUGRF_PMU 21
-#define PCLK_INTMEM1_PMU 22
-#define PCLK_GPIO0_PMU 23
-#define PCLK_GPIO1_PMU 24
-#define PCLK_SGRF_PMU 25
-#define PCLK_NOC_PMU 26
-#define PCLK_I2C0_PMU 27
-#define PCLK_I2C4_PMU 28
-#define PCLK_I2C8_PMU 29
-#define PCLK_RKPWM_PMU 30
-#define PCLK_SPI3_PMU 31
-#define PCLK_TIMER_PMU 32
-#define PCLK_MAILBOX_PMU 33
-#define PCLK_UART4_PMU 34
-#define PCLK_WDT_M0_PMU 35
-
-#define FCLK_CM0S_SRC_PMU 44
-#define FCLK_CM0S_PMU 45
-#define SCLK_CM0S_PMU 46
-#define HCLK_CM0S_PMU 47
-#define DCLK_CM0S_PMU 48
-#define PCLK_INTR_ARB_PMU 49
-#define HCLK_NOC_PMU 50
-
-#define CLKPMU_NR_CLKS (HCLK_NOC_PMU + 1)
-
-/* soft-reset indices */
-
-/* cru_softrst_con0 */
-#define SRST_CORE_L0 0
-#define SRST_CORE_B0 1
-#define SRST_CORE_PO_L0 2
-#define SRST_CORE_PO_B0 3
-#define SRST_L2_L 4
-#define SRST_L2_B 5
-#define SRST_ADB_L 6
-#define SRST_ADB_B 7
-#define SRST_A_CCI 8
-#define SRST_A_CCIM0_NOC 9
-#define SRST_A_CCIM1_NOC 10
-#define SRST_DBG_NOC 11
-
-/* cru_softrst_con1 */
-#define SRST_CORE_L0_T 16
-#define SRST_CORE_L1 17
-#define SRST_CORE_L2 18
-#define SRST_CORE_L3 19
-#define SRST_CORE_PO_L0_T 20
-#define SRST_CORE_PO_L1 21
-#define SRST_CORE_PO_L2 22
-#define SRST_CORE_PO_L3 23
-#define SRST_A_ADB400_GIC2COREL 24
-#define SRST_A_ADB400_COREL2GIC 25
-#define SRST_P_DBG_L 26
-#define SRST_L2_L_T 28
-#define SRST_ADB_L_T 29
-#define SRST_A_RKPERF_L 30
-#define SRST_PVTM_CORE_L 31
-
-/* cru_softrst_con2 */
-#define SRST_CORE_B0_T 32
-#define SRST_CORE_B1 33
-#define SRST_CORE_PO_B0_T 36
-#define SRST_CORE_PO_B1 37
-#define SRST_A_ADB400_GIC2COREB 40
-#define SRST_A_ADB400_COREB2GIC 41
-#define SRST_P_DBG_B 42
-#define SRST_L2_B_T 43
-#define SRST_ADB_B_T 45
-#define SRST_A_RKPERF_B 46
-#define SRST_PVTM_CORE_B 47
-
-/* cru_softrst_con3 */
-#define SRST_A_CCI_T 50
-#define SRST_A_CCIM0_NOC_T 51
-#define SRST_A_CCIM1_NOC_T 52
-#define SRST_A_ADB400M_PD_CORE_B_T 53
-#define SRST_A_ADB400M_PD_CORE_L_T 54
-#define SRST_DBG_NOC_T 55
-#define SRST_DBG_CXCS 56
-#define SRST_CCI_TRACE 57
-#define SRST_P_CCI_GRF 58
-
-/* cru_softrst_con4 */
-#define SRST_A_CENTER_MAIN_NOC 64
-#define SRST_A_CENTER_PERI_NOC 65
-#define SRST_P_CENTER_MAIN 66
-#define SRST_P_DDRMON 67
-#define SRST_P_CIC 68
-#define SRST_P_CENTER_SGRF 69
-#define SRST_DDR0_MSCH 70
-#define SRST_DDRCFG0_MSCH 71
-#define SRST_DDR0 72
-#define SRST_DDRPHY0 73
-#define SRST_DDR1_MSCH 74
-#define SRST_DDRCFG1_MSCH 75
-#define SRST_DDR1 76
-#define SRST_DDRPHY1 77
-#define SRST_DDR_CIC 78
-#define SRST_PVTM_DDR 79
-
-/* cru_softrst_con5 */
-#define SRST_A_VCODEC_NOC 80
-#define SRST_A_VCODEC 81
-#define SRST_H_VCODEC_NOC 82
-#define SRST_H_VCODEC 83
-#define SRST_A_VDU_NOC 88
-#define SRST_A_VDU 89
-#define SRST_H_VDU_NOC 90
-#define SRST_H_VDU 91
-#define SRST_VDU_CORE 92
-#define SRST_VDU_CA 93
-
-/* cru_softrst_con6 */
-#define SRST_A_IEP_NOC 96
-#define SRST_A_VOP_IEP 97
-#define SRST_A_IEP 98
-#define SRST_H_IEP_NOC 99
-#define SRST_H_IEP 100
-#define SRST_A_RGA_NOC 102
-#define SRST_A_RGA 103
-#define SRST_H_RGA_NOC 104
-#define SRST_H_RGA 105
-#define SRST_RGA_CORE 106
-#define SRST_EMMC_NOC 108
-#define SRST_EMMC 109
-#define SRST_EMMC_GRF 110
-
-/* cru_softrst_con7 */
-#define SRST_A_PERIHP_NOC 112
-#define SRST_P_PERIHP_GRF 113
-#define SRST_H_PERIHP_NOC 114
-#define SRST_USBHOST0 115
-#define SRST_HOSTC0_AUX 116
-#define SRST_HOST0_ARB 117
-#define SRST_USBHOST1 118
-#define SRST_HOSTC1_AUX 119
-#define SRST_HOST1_ARB 120
-#define SRST_SDIO0 121
-#define SRST_SDMMC 122
-#define SRST_HSIC 123
-#define SRST_HSIC_AUX 124
-#define SRST_AHB1TOM 125
-#define SRST_P_PERIHP_NOC 126
-#define SRST_HSICPHY 127
-
-/* cru_softrst_con8 */
-#define SRST_A_PCIE 128
-#define SRST_P_PCIE 129
-#define SRST_PCIE_CORE 130
-#define SRST_PCIE_MGMT 131
-#define SRST_PCIE_MGMT_STICKY 132
-#define SRST_PCIE_PIPE 133
-#define SRST_PCIE_PM 134
-#define SRST_PCIEPHY 135
-#define SRST_A_GMAC_NOC 136
-#define SRST_A_GMAC 137
-#define SRST_P_GMAC_NOC 138
-#define SRST_P_GMAC_GRF 140
-#define SRST_HSICPHY_POR 142
-#define SRST_HSICPHY_UTMI 143
-
-/* cru_softrst_con9 */
-#define SRST_USB2PHY0_POR 144
-#define SRST_USB2PHY0_UTMI_PORT0 145
-#define SRST_USB2PHY0_UTMI_PORT1 146
-#define SRST_USB2PHY0_EHCIPHY 147
-#define SRST_UPHY0_PIPE_L00 148
-#define SRST_UPHY0 149
-#define SRST_UPHY0_TCPDPWRUP 150
-#define SRST_USB2PHY1_POR 152
-#define SRST_USB2PHY1_UTMI_PORT0 153
-#define SRST_USB2PHY1_UTMI_PORT1 154
-#define SRST_USB2PHY1_EHCIPHY 155
-#define SRST_UPHY1_PIPE_L00 156
-#define SRST_UPHY1 157
-#define SRST_UPHY1_TCPDPWRUP 158
-
-/* cru_softrst_con10 */
-#define SRST_A_PERILP0_NOC 160
-#define SRST_A_DCF 161
-#define SRST_GIC500 162
-#define SRST_DMAC0_PERILP0 163
-#define SRST_DMAC1_PERILP0 164
-#define SRST_TZMA 165
-#define SRST_INTMEM 166
-#define SRST_ADB400_MST0 167
-#define SRST_ADB400_MST1 168
-#define SRST_ADB400_SLV0 169
-#define SRST_ADB400_SLV1 170
-#define SRST_H_PERILP0 171
-#define SRST_H_PERILP0_NOC 172
-#define SRST_ROM 173
-#define SRST_CRYPTO0_S 174
-#define SRST_CRYPTO0_M 175
-
-/* cru_softrst_con11 */
-#define SRST_P_DCF 176
-#define SRST_CM0S_NOC 177
-#define SRST_CM0S 178
-#define SRST_CM0S_DBG 179
-#define SRST_CM0S_PO 180
-#define SRST_CRYPTO0 181
-#define SRST_P_PERILP1_SGRF 182
-#define SRST_P_PERILP1_GRF 183
-#define SRST_CRYPTO1_S 184
-#define SRST_CRYPTO1_M 185
-#define SRST_CRYPTO1 186
-#define SRST_GIC_NOC 188
-#define SRST_SD_NOC 189
-#define SRST_SDIOAUDIO_BRG 190
-
-/* cru_softrst_con12 */
-#define SRST_H_PERILP1 192
-#define SRST_H_PERILP1_NOC 193
-#define SRST_H_I2S0_8CH 194
-#define SRST_H_I2S1_8CH 195
-#define SRST_H_I2S2_8CH 196
-#define SRST_H_SPDIF_8CH 197
-#define SRST_P_PERILP1_NOC 198
-#define SRST_P_EFUSE_1024 199
-#define SRST_P_EFUSE_1024S 200
-#define SRST_P_I2C0 201
-#define SRST_P_I2C1 202
-#define SRST_P_I2C2 203
-#define SRST_P_I2C3 204
-#define SRST_P_I2C4 205
-#define SRST_P_I2C5 206
-#define SRST_P_MAILBOX0 207
-
-/* cru_softrst_con13 */
-#define SRST_P_UART0 208
-#define SRST_P_UART1 209
-#define SRST_P_UART2 210
-#define SRST_P_UART3 211
-#define SRST_P_SARADC 212
-#define SRST_P_TSADC 213
-#define SRST_P_SPI0 214
-#define SRST_P_SPI1 215
-#define SRST_P_SPI2 216
-#define SRST_P_SPI3 217
-#define SRST_P_SPI4 218
-#define SRST_SPI0 219
-#define SRST_SPI1 220
-#define SRST_SPI2 221
-#define SRST_SPI3 222
-#define SRST_SPI4 223
-
-/* cru_softrst_con14 */
-#define SRST_I2S0_8CH 224
-#define SRST_I2S1_8CH 225
-#define SRST_I2S2_8CH 226
-#define SRST_SPDIF_8CH 227
-#define SRST_UART0 228
-#define SRST_UART1 229
-#define SRST_UART2 230
-#define SRST_UART3 231
-#define SRST_TSADC 232
-#define SRST_I2C0 233
-#define SRST_I2C1 234
-#define SRST_I2C2 235
-#define SRST_I2C3 236
-#define SRST_I2C4 237
-#define SRST_I2C5 238
-#define SRST_SDIOAUDIO_NOC 239
-
-/* cru_softrst_con15 */
-#define SRST_A_VIO_NOC 240
-#define SRST_A_HDCP_NOC 241
-#define SRST_A_HDCP 242
-#define SRST_H_HDCP_NOC 243
-#define SRST_H_HDCP 244
-#define SRST_P_HDCP_NOC 245
-#define SRST_P_HDCP 246
-#define SRST_P_HDMI_CTRL 247
-#define SRST_P_DP_CTRL 248
-#define SRST_S_DP_CTRL 249
-#define SRST_C_DP_CTRL 250
-#define SRST_P_MIPI_DSI0 251
-#define SRST_P_MIPI_DSI1 252
-#define SRST_DP_CORE 253
-#define SRST_DP_I2S 254
-
-/* cru_softrst_con16 */
-#define SRST_GASKET 256
-#define SRST_VIO_GRF 258
-#define SRST_DPTX_SPDIF_REC 259
-#define SRST_HDMI_CTRL 260
-#define SRST_HDCP_CTRL 261
-#define SRST_A_ISP0_NOC 262
-#define SRST_A_ISP1_NOC 263
-#define SRST_H_ISP0_NOC 266
-#define SRST_H_ISP1_NOC 267
-#define SRST_H_ISP0 268
-#define SRST_H_ISP1 269
-#define SRST_ISP0 270
-#define SRST_ISP1 271
-
-/* cru_softrst_con17 */
-#define SRST_A_VOP0_NOC 272
-#define SRST_A_VOP1_NOC 273
-#define SRST_A_VOP0 274
-#define SRST_A_VOP1 275
-#define SRST_H_VOP0_NOC 276
-#define SRST_H_VOP1_NOC 277
-#define SRST_H_VOP0 278
-#define SRST_H_VOP1 279
-#define SRST_D_VOP0 280
-#define SRST_D_VOP1 281
-#define SRST_VOP0_PWM 282
-#define SRST_VOP1_PWM 283
-#define SRST_P_EDP_NOC 284
-#define SRST_P_EDP_CTRL 285
-
-/* cru_softrst_con18 */
-#define SRST_A_GPU 288
-#define SRST_A_GPU_NOC 289
-#define SRST_A_GPU_GRF 290
-#define SRST_PVTM_GPU 291
-#define SRST_A_USB3_NOC 292
-#define SRST_A_USB3_OTG0 293
-#define SRST_A_USB3_OTG1 294
-#define SRST_A_USB3_GRF 295
-#define SRST_PMU 296
-
-/* cru_softrst_con19 */
-#define SRST_P_TIMER0_5 304
-#define SRST_TIMER0 305
-#define SRST_TIMER1 306
-#define SRST_TIMER2 307
-#define SRST_TIMER3 308
-#define SRST_TIMER4 309
-#define SRST_TIMER5 310
-#define SRST_P_TIMER6_11 311
-#define SRST_TIMER6 312
-#define SRST_TIMER7 313
-#define SRST_TIMER8 314
-#define SRST_TIMER9 315
-#define SRST_TIMER10 316
-#define SRST_TIMER11 317
-#define SRST_P_INTR_ARB_PMU 318
-#define SRST_P_ALIVE_SGRF 319
-
-/* cru_softrst_con20 */
-#define SRST_P_GPIO2 320
-#define SRST_P_GPIO3 321
-#define SRST_P_GPIO4 322
-#define SRST_P_GRF 323
-#define SRST_P_ALIVE_NOC 324
-#define SRST_P_WDT0 325
-#define SRST_P_WDT1 326
-#define SRST_P_INTR_ARB 327
-#define SRST_P_UPHY0_DPTX 328
-#define SRST_P_UPHY0_APB 330
-#define SRST_P_UPHY0_TCPHY 332
-#define SRST_P_UPHY1_TCPHY 333
-#define SRST_P_UPHY0_TCPDCTRL 334
-#define SRST_P_UPHY1_TCPDCTRL 335
-
-/* pmu soft-reset indices */
-
-/* pmu_cru_softrst_con0 */
-#define SRST_P_NOC 0
-#define SRST_P_INTMEM 1
-#define SRST_H_CM0S 2
-#define SRST_H_CM0S_NOC 3
-#define SRST_DBG_CM0S 4
-#define SRST_PO_CM0S 5
-#define SRST_P_SPI6 6
-#define SRST_SPI6 7
-#define SRST_P_TIMER_0_1 8
-#define SRST_P_TIMER_0 9
-#define SRST_P_TIMER_1 10
-#define SRST_P_UART4 11
-#define SRST_UART4 12
-#define SRST_P_WDT 13
-
-/* pmu_cru_softrst_con1 */
-#define SRST_P_I2C6 16
-#define SRST_P_I2C7 17
-#define SRST_P_I2C8 18
-#define SRST_P_MAILBOX 19
-#define SRST_P_RKPWM 20
-#define SRST_P_PMUGRF 21
-#define SRST_P_SGRF 22
-#define SRST_P_GPIO0 23
-#define SRST_P_GPIO1 24
-#define SRST_P_CRU 25
-#define SRST_P_INTR 26
-#define SRST_PVTM 27
-#define SRST_I2C6 28
-#define SRST_I2C7 29
-#define SRST_I2C8 30
-
-#endif
+++ /dev/null
-#ifndef __DT_BINDINGS_POWER_RK3399_POWER_H__
-#define __DT_BINDINGS_POWER_RK3399_POWER_H__
-
-/* VD_CORE_L */
-#define RK3399_PD_A53_L0 0
-#define RK3399_PD_A53_L1 1
-#define RK3399_PD_A53_L2 2
-#define RK3399_PD_A53_L3 3
-#define RK3399_PD_SCU_L 4
-
-/* VD_CORE_B */
-#define RK3399_PD_A72_B0 5
-#define RK3399_PD_A72_B1 6
-#define RK3399_PD_SCU_B 7
-
-/* VD_LOGIC */
-#define RK3399_PD_TCPD0 8
-#define RK3399_PD_TCPD1 9
-#define RK3399_PD_CCI 10
-#define RK3399_PD_CCI0 11
-#define RK3399_PD_CCI1 12
-#define RK3399_PD_PERILP 13
-#define RK3399_PD_PERIHP 14
-#define RK3399_PD_VIO 15
-#define RK3399_PD_VO 16
-#define RK3399_PD_VOPB 17
-#define RK3399_PD_VOPL 18
-#define RK3399_PD_ISP0 19
-#define RK3399_PD_ISP1 20
-#define RK3399_PD_HDCP 21
-#define RK3399_PD_GMAC 22
-#define RK3399_PD_EMMC 23
-#define RK3399_PD_USB3 24
-#define RK3399_PD_EDP 25
-#define RK3399_PD_GIC 26
-#define RK3399_PD_SD 27
-#define RK3399_PD_SDIOAUDIO 28
-#define RK3399_PD_ALIVE 29
-
-/* VD_CENTER */
-#define RK3399_PD_CENTER 30
-#define RK3399_PD_VCODEC 31
-#define RK3399_PD_VDU 32
-#define RK3399_PD_RGA 33
-#define RK3399_PD_IEP 34
-
-/* VD_GPU */
-#define RK3399_PD_GPU 35
-
-/* VD_PMU */
-#define RK3399_PD_PMU 36
-
-#endif
projects / u-boot.git / commitdiff