CONFIG_USB3_VBUS_PIN="PH15"
CONFIG_AXP_GPIO=y
CONFIG_SYS_I2C_SUN8I_RSB=y
-CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_AXP_USB_POWER=y
CONFIG_AXP809_POWER=y
CONFIG_USB3_VBUS_PIN="PH5"
CONFIG_AXP_GPIO=y
CONFIG_SYS_I2C_SUN8I_RSB=y
-CONFIG_DM_REGULATOR=y
CONFIG_REGULATOR_AXP_USB_POWER=y
CONFIG_AXP809_POWER=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
-CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_MONITOR_LEN=786432
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
CONFIG_SPL=y
CONFIG_TARGET_ANDES_AE350=y
CONFIG_RISCV_SMODE=y
# CONFIG_AVAILABLE_HARTS is not set
+CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_CACHE=y
CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
+CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_CMD_IMLS=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set
-CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
\ No newline at end of file
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_MONITOR_LEN=786432
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
CONFIG_SPL=y
CONFIG_TARGET_ANDES_AE350=y
CONFIG_RISCV_SMODE=y
CONFIG_SPL_XIP=y
+CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_CACHE=y
CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
+CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_CMD_IMLS=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set
-CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
\ No newline at end of file
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x10000000
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
-CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
CONFIG_SPL=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
# CONFIG_AVAILABLE_HARTS is not set
+CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x10000000
-CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_CACHE=y
CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
+CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_CMD_IMLS=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set
-CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
\ No newline at end of file
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="ae350_64"
CONFIG_SPL_TEXT_BASE=0x80000000
-CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SPL_SYS_MALLOC_F_LEN=0x2000000
CONFIG_SPL=y
CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_SPL_XIP=y
+CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
+CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
-CONFIG_SYS_MONITOR_BASE=0x88000000
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTDELAY=3
CONFIG_DISPLAY_CPUINFO=y
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_CACHE=y
CONFIG_SPL_OPENSBI_SCRATCH_OPTIONS=0x0
+CONFIG_SYS_PROMPT="RISC-V # "
CONFIG_SYS_PBSIZE=1050
CONFIG_SYS_BOOTM_LEN=0x4000000
CONFIG_CMD_IMLS=y
CONFIG_SPI=y
CONFIG_ATCSPI200_SPI=y
# CONFIG_BINMAN_FDT is not set
-CONFIG_SPL_LOAD_FIT_OPENSBI_OS_BOOT=y
\ No newline at end of file
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x2000
CONFIG_IDENT_STRING=" ##v01.06"
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x2000
CONFIG_IDENT_STRING=" ##v01.07"
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_GPIO_HOG=y
CONFIG_SPL_GPIO_HOG=y
CONFIG_MXC_GPIO=y
+CONFIG_DM_PCA953X=y
CONFIG_DM_I2C=y
CONFIG_I2C_MUX=y
CONFIG_I2C_MUX_PCA954x=y
CONFIG_USB_ETHER=y
CONFIG_USB_ETH_CDC=y
CONFIG_IMX_WATCHDOG=y
-CONFIG_DM_PCA953X=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5
-CONFIG_SDP_LOADADDR=0x0
CONFIG_IMX_WATCHDOG=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK=0x13e000
CONFIG_SPL=y
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL_STACK=0x13e000
CONFIG_SPL=y
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
-CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg"
CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_SPL_BOARD_INIT=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_LEGACY_IMAGE_FORMAT is not set
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
+CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg"
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_STACK=0x22050000
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_SYS_LOAD_ADDR=0x80480000
CONFIG_REMAKE_ELF=y
CONFIG_FIT=y
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_STACK=0x20519dd0
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_SYS_LOAD_ADDR=0x80400000
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x90000000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SPL_STACK=0x20519dd0
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
-CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_SYS_LOAD_ADDR=0x80400000
CONFIG_SYS_MEMTEST_START=0x80000000
CONFIG_SYS_MEMTEST_END=0x90000000
CONFIG_SPL_BSS_MAX_SIZE=0x2000
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_BOOTROM_SUPPORT=y
+CONFIG_SPL_LOAD_IMX_CONTAINER=y
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_SYS_MALLOC=y
CONFIG_SPL_HAS_CUSTOM_MALLOC_START=y
CONFIG_SYS_MONITOR_LEN=524288
CONFIG_SYS_LOAD_ADDR=0x24000000
CONFIG_FIT=y
-CONFIG_OF_BOARD_SETUP=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
+CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rw rootwait"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SPI=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_MAX_CONTROLLER_COUNT=2
CONFIG_USB_GADGET=y
CONFIG_USB_GADGET_MANUFACTURER="FSL"
CONFIG_USB_GADGET_VENDOR_NUM=0x0525
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_OFFSET=0xC0000
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa325"
-CONFIG_SYS_PROMPT="NSA325> "
CONFIG_IDENT_STRING="\nZyXEL NSA325 2-Bay Power Media Server"
CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_PCI=y
CONFIG_BOOTDELAY=10
CONFIG_USE_PREBOOT=y
CONFIG_BOARD_LATE_INIT=y
+CONFIG_SYS_PROMPT="NSA325> "
# CONFIG_BOOTM_PLAN9 is not set
# CONFIG_BOOTM_RTEMS is not set
# CONFIG_BOOTM_VXWORKS is not set
CONFIG_DRAM_CLK=672
CONFIG_MMC_SUNXI_SLOT_EXTRA=2
CONFIG_USB1_VBUS_PIN="PG13"
+CONFIG_USB3_VBUS_PIN="PG11"
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
CONFIG_SPL_I2C=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SY8106A_POWER=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_OHCI_HCD=y
-CONFIG_USB3_VBUS_PIN="PG11"
CONFIG_R_I2C_ENABLE=y
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_PWM=y
CONFIG_PWM_SUNXI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogoplug-series-4"
CONFIG_IDENT_STRING="\nPogoplug V4"
CONFIG_SYS_LOAD_ADDR=0x800000
-CONFIG_LTO=y
CONFIG_PCI=y
+CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_BOOTSTAGE=y
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_PREBOOT="setenv usb_pgood_delay 2000; usb start"
CONFIG_SPL_SYS_I2C_LEGACY=y
CONFIG_SYS_I2C_MVTWSI=y
-CONFIG_DM_REGULATOR_FIXED=y
CONFIG_DM_PWM=y
CONFIG_PWM_SUNXI=y
CONFIG_USB_EHCI_HCD=y
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_OFFSET=0x60000
CONFIG_TARGET_USBARMORY=y
-CONFIG_SYS_I2C_MXC_I2C1=y
-CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-usbarmory"
# CONFIG_CMD_BMODE is not set