parameters from when MMC is being used in raw mode
(for falcon mode)
- CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
- Filename to read to load U-Boot when reading from filesystem
-
- CONFIG_SPL_FS_LOAD_KERNEL_NAME
- Filename to read to load kernel uImage when reading
- from filesystem (for Falcon mode)
-
- CONFIG_SPL_FS_LOAD_ARGS_NAME
- Filename to read to load kernel argument parameters
- when reading from filesystem (for Falcon mode)
-
CONFIG_SPL_MPC83XX_WAIT_FOR_NAND
Set this for NAND SPL on PPC mpc83xx targets, so that
start.S waits for the rest of the SPL to load before
filesystem from within SPL. Support for the underlying block
device (e.g. MMC or USB) must be enabled separately.
+config SPL_FS_LOAD_PAYLOAD_NAME
+ string "File to load for U-Boot from the filesystem"
+ depends on SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS
+ default "tispl.bin" if SYS_K3_SPL_ATF
+ default "u-boot.itb" if SPL_LOAD_FIT
+ default "u-boot.img"
+ help
+ Filename to read to load U-Boot when reading from filesystem.
+
+config SPL_FS_LOAD_KERNEL_NAME
+ string "File to load for the OS kernel from the filesystem"
+ depends on (SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS) && SPL_OS_BOOT
+ default "uImage"
+ help
+ Filename to read to load for the OS kernel when reading from the
+ filesystem.
+
+config SPL_FS_LOAD_ARGS_NAME
+ string "File to load for the OS kernel argument parameters from the filesystem"
+ depends on (SPL_FS_EXT4 || SPL_FS_FAT || SPL_FS_SQUASHFS) && SPL_OS_BOOT
+ default "args"
+ help
+ Filename to read to load for the OS kernel argument parameters from
+ the filesystem.
+
config SPL_FAT_WRITE
bool "Support write for FAT filesystems"
help
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
#endif
-#ifndef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#ifndef CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR
/* Dummy value to make the compiler happy */
#define CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR 0x100
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_ETH=y
# CONFIG_SPL_FS_EXT4 is not set
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_MUSB_NEW=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_ARCH_MISC_INIT=y
CONFIG_SPL_FIT_IMAGE_TINY=y
# CONFIG_SPL_FS_EXT4 is not set
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_FIT_IMAGE_TINY=y
# CONFIG_SPL_ENV_SUPPORT is not set
# CONFIG_SPL_FS_EXT4 is not set
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_ETH=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_BOOTCOMMAND="run findfdt; run finduuid; run distro_bootcmd"
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_ETH=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_ANDROID_AB=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_OS_BOOT=y
CONFIG_ANDROID_AB=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_ANDROID_AB=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_ETH=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_BOOTDELAY=0
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CLOCKS=y
+CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
+CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_MAXARGS=64
CONFIG_SYS_PBSIZE=2073
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
CONFIG_SPL_NAND_BASE=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_NAND_DRIVERS=y
CONFIG_SPL_NAND_ECC=y
# CONFIG_MISC_INIT_R is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
# CONFIG_SPL_NAND_SUPPORT is not set
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_RAM_SUPPORT=y
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
# CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR is not set
CONFIG_SPL_DMA=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_NAND_SUPPORT=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_SPL_STACK_R=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x1400
CONFIG_SPL_DMA=y
CONFIG_SPL_ENV_SUPPORT=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_DM_MAILBOX=y
CONFIG_SPL_MTD_SUPPORT=y
CONFIG_PREBOOT="if hdmidet; then usb start; setenv stdin serial,usbkbd; setenv stdout serial,vidconsole; setenv stderr serial,vidconsole; else setenv stdin serial; setenv stdout serial; setenv stderr serial; fi;"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_MAXARGS=32
CONFIG_SPL_LEGACY_IMAGE_FORMAT=y
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
CONFIG_HUSH_PARSER=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_MAXARGS=32
# CONFIG_SPL_BANNER_PRINT is not set
CONFIG_SPL_CPU=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="boot/fw_payload.bin"
CONFIG_SPL_RTC=y
CONFIG_SYS_PROMPT="openpiton$ "
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x18a
CONFIG_SPL_DMA=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_DM_SPI_FLASH=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x31400
CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE=y
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_SPL_USB_SDP_SUPPORT=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_RAW_IMAGE_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
+CONFIG_SPL_FS_LOAD_ARGS_NAME="imx6dl-riotboard.dtb"
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x0
CONFIG_USE_PREBOOT=y
CONFIG_CLOCKS=y
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb"
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_FALCON_BOOT_MMCSD=y
CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR=0x0
CONFIG_BOOTCOMMAND="run findfdt; run distro_bootcmd"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_MAXARGS=32
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_ENV_SUPPORT=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_MAXARGS=32
CONFIG_SYS_PBSIZE=532
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_USB_HOST=y
CONFIG_SPL_USB_GADGET=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL_FIT_IMAGE_TINY=y
CONFIG_SPL_FS_EXT4=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot-dtb.img"
CONFIG_SPL_I2C=y
CONFIG_SPL_WATCHDOG=y
CONFIG_SYS_MAXARGS=32
CONFIG_USE_PREBOOT=y
CONFIG_CLOCKS=y
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_FS_LOAD_PAYLOAD_NAME="u-boot.img"
+CONFIG_SPL_FS_LOAD_ARGS_NAME="system.dtb"
CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_CLOCKS=y
CONFIG_SPL_STACK_R=y
+CONFIG_SPL_FS_LOAD_KERNEL_NAME="atf-uboot.ub"
+CONFIG_SPL_FS_LOAD_ARGS_NAME="u-boot.bin"
CONFIG_SPL_FPGA=y
CONFIG_SPL_OS_BOOT=y
CONFIG_SPL_RAM_SUPPORT=y
#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
-/* Defines for SPL */
-
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
#endif /* __CONFIG_H */
/* DDR Configuration */
#define CONFIG_SYS_SDRAM_BASE1 0x880000000
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
-#endif
-
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
#if defined(CONFIG_TARGET_AM642_A53_EVM)
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SPL_TEXT_BASE + SZ_4M)
#define CONFIG_SYS_SPL_MALLOC_SIZE SZ_16M
#endif
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
-#endif
-
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_SYS_SPL_MALLOC_START 0x70080000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
#elif CONFIG_NAND_BOOT
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SYS_MCKR 0x1301
#define CONFIG_SYS_MCKR_CSS 0x1302
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SPL_MAX_SIZE 0x00100000
#define CONFIG_SPL_BSS_START_ADDR 0x04000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000
-
-#ifdef CONFIG_SPL_MMC
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
-#endif
#endif
#define RISCV_MMODE_TIMERBASE 0xe6000000
#include "imx6_spl.h"
/* RiOTboard */
#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "imx6dl-riotboard.dtb"
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* offset 69KB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* offset 69KB */
/* Falcon Mode */
#ifdef CONFIG_SPL_OS_BOOT
-# define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-# define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
# define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/* MMC support: args@1MB kernel@2MB */
#endif
/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_SATA_FAT_BOOT_PARTITION 1
#endif
-/* Define the payload for FAT/EXT support */
-#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
-# ifdef CONFIG_OF_CONTROL
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
-# else
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-# endif
-#endif
-
#if defined(CONFIG_MX6SX) || defined(CONFIG_MX6SL) || \
defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
#define CONFIG_SPL_BSS_START_ADDR 0x88200000
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
/* Falcon */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x13000000
/* MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
#endif
-/* Define the payload for FAT/EXT support */
-#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
-# ifdef CONFIG_OF_CONTROL
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
-# else
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-# endif
-#endif
-
#define CONFIG_SPL_BSS_START_ADDR 0x88200000
#define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
#define CONFIG_SYS_SPL_MALLOC_START 0x88300000
/* Image load address in RAM for DFU boot*/
#endif
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
-#endif
-
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/* Image load address in RAM for DFU boot*/
#endif
-#ifdef CONFIG_SYS_K3_SPL_ATF
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "tispl.bin"
-#endif
-
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_K3_MAX_DOWNLODABLE_IMAGE_SIZE
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#endif
#endif
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
#include <asm/fsl_secure_boot.h>
#endif /* __LS1046ARDB_H__ */
*/
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR (0x800)
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (0x80)
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "fitImage"
#define CONFIG_MXC_UART_BASE UART1_BASE
/* Falcon Mode */
#ifdef CONFIG_SPL_OS_BOOT
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#include "mx6sabre_common.h"
/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SPL_STACK (0x80000000 + 0x04000000 - \
GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "boot/fw_payload.bin"
#define CONFIG_SPL_GD_ADDR 0x85000000
#endif
#ifdef CONFIG_SPL_OS_BOOT
/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x18000000
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#ifdef CONFIG_SPL_OS_BOOT
/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#ifdef CONFIG_SPL_OS_BOOT
/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x88000000
/* Falcon Mode - MMC support: args@1MB kernel@2MB */
#define CONFIG_SYS_SPL_MALLOC_START 0x70080000
#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00080000
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
#elif CONFIG_NAND_BOOT
#define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000
/* RAW SD card / eMMC locations. */
-/* FAT sd card locations. */
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
#define CONFIG_SYS_SDRAM_BASE 0
#define SDRAM_BANK_SIZE (2UL << 30)
#define SDRAM_MAX_SIZE 0xfe000000
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
/* size of u-boot.bin to load */
#define CONFIG_SYS_MONITOR_LEN (2 * SZ_512K)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
/* Falcon boot support on raw MMC */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x100 /* 128 KiB */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS (CONFIG_CMD_SPL_WRITE_SIZE / 512)
#define CONFIG_SYS_SPL_ARGS_ADDR 0x22000000
/* Falcon boot support on FAT on MMC */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
/* Falcon boot support on raw NAND */
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x1a0000
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SYS_MONITOR_LEN (512 << 10)
-#ifdef CONFIG_SD_BOOT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
#define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
10, 11, 12, 13, 14, 15, 16, 17, \
18, 19, 20, 21, 22, 23, 24, 25, \
#define CONFIG_SYS_SPL_MALLOC_SIZE (1024 * 1024)
#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
/*
* Serial
*/
#define CONFIG_SPL_MAX_SIZE CONFIG_SYS_INIT_RAM_SIZE
#endif
-/* SPL SDMMC boot support */
-#ifdef CONFIG_SPL_MMC
-#if defined(CONFIG_SPL_FS_FAT) || defined(CONFIG_SPL_FS_EXT4)
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-#endif
-
/* SPL QSPI boot support */
/* SPL NAND boot support */
#define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_BSS_START_ADDR \
- CONFIG_SYS_SPL_MALLOC_SIZE)
-/* SPL SDMMC boot support */
-#ifdef CONFIG_SPL_LOAD_FIT
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
-#else
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#endif /* __CONFIG_SOCFPGA_SOC64_COMMON_H__ */
#define CONFIG_SPL_BSS_START_ADDR 0x80000000
#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-
#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000
/*
CONFIG_SPL_TEXT_BASE)
#endif
-
-/* FAT sd card locations. */
-#ifndef CONFIG_SPL_FS_LOAD_PAYLOAD_NAME
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
#ifdef CONFIG_SPL_OS_BOOT
/* FAT */
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
/* RAW SD card / eMMC */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0x1500 /* address 0x2A0000 */
/* SPL settings */
#undef CONFIG_SPL_MAX_FOOTPRINT
#define CONFIG_SPL_MAX_FOOTPRINT CONFIG_SYS_SPI_U_BOOT_OFFS
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
/* Setup proper boot sequences for Miami boards */
#ifndef CONFIG_TPL_BUILD
/* Falcon Mode */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "args"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x0ffe5000
/* Falcon Mode - MMC support: args@16MB kernel@17MB */
#endif
/* u-boot is like dtb */
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin"
#define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000
/* ATF is my kernel image */
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub"
/* MMC support */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */
# define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */
-# if defined(CONFIG_SPL_LOAD_FIT)
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.itb"
-# else
-# define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-# endif
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU)
# define CONFIG_SPL_HASH
/* Boot FreeBSD/vxWorks from an ELF image */
#define CONFIG_SYS_MMC_MAX_DEVICE 1
-/* MMC support */
-#ifdef CONFIG_MMC_SDHCI_ZYNQ
-#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
-#endif
-
/* Address in RAM where the parameters must be copied by SPL. */
#define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000
-#define CONFIG_SPL_FS_LOAD_ARGS_NAME "system.dtb"
-#define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage"
-
/* Not using MMC raw mode - just for compilation purpose */
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0
#define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0