Now that we have consistent usage, migrate this symbol to Kconfig.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Path within the source tree to the linker script to use for the
main U-Boot binary.
+config SYS_LOAD_ADDR
+ hex "Address in memory to use by default"
+ default 0x01000000 if ARCH_SOCFPGA
+ default 0x02000000 if PPC || X86
+ default 0x22000000 if MACH_SUN9I
+ default 0x42000000 if ARCH_SUNXI && !MACH_SUN9I
+ default 0x82000000 if ARCH_KEYSTONE || ARCH_OMAP2PLUS || ARCH_K3
+ default 0x82000000 if ARCH_MX6 && (MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL)
+ default 0x12000000 if ARCH_MX6 && !(MX6SL || MX6SLL || MX6SX || MX6UL || MX6ULL)
+ default 0x80800000 if ARCH_MX7
+ default 0x90000000 if FSL_LSCH2 || FSL_LSCH3
+ help
+ Address in memory to use as the default safe load address.
+
config ERR_PTR_OFFSET
hex
default 0x0
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="10m50_devboard"
+CONFIG_SYS_LOAD_ADDR=0xcc000000
CONFIG_FIT=y
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="3c120_devboard"
+CONFIG_SYS_LOAD_ADDR=0xd4000000
CONFIG_FIT=y
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5208EVBE"
CONFIG_TARGET_M5208EVBE=y
+CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5235EVB_Flash32"
CONFIG_TARGET_M5235EVB=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_EXTRA_OPTIONS="NORFLASH_PS32BIT"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5235EVB"
CONFIG_TARGET_M5235EVB=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5249EVB"
CONFIG_TARGET_M5249EVB=y
+CONFIG_SYS_LOAD_ADDR=0x200000
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SYS_DEVICE_NULLDEV=y
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="M5253DEMO"
CONFIG_TARGET_M5253DEMO=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5272C3"
CONFIG_TARGET_M5272C3=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5275EVB"
CONFIG_TARGET_M5275EVB=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5282EVB"
CONFIG_TARGET_M5282EVB=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_ENV_SECT_SIZE=0x8000
CONFIG_DEFAULT_DEVICE_TREE="M53017EVB"
CONFIG_TARGET_M53017EVB=y
+CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock3 rw rootfstype=jffs2"
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5329AFEE"
CONFIG_TARGET_M5329EVB=y
+CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=0"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5329BFEE"
CONFIG_TARGET_M5329EVB=y
+CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="M5373EVB"
CONFIG_TARGET_M5373EVB=y
+CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_EXTRA_OPTIONS="NANDFLASH_SIZE=16"
CONFIG_BOOTDELAY=1
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SYS_BR7_PRELIM_BOOL=y
CONFIG_SYS_BR7_PRELIM=0x1C000001
CONFIG_SYS_OR7_PRELIM=0xFFFF810A
+CONFIG_SYS_LOAD_ADDR=0x200000
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=5
CONFIG_AUTOBOOT_KEYED=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifkw"
CONFIG_IDENT_STRING="\nSBx81LIFKW"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_BOOTDELAY=3
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-atl-sbx81lifxcat"
CONFIG_IDENT_STRING="\nSBx81LIFXCAT"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_BOOTDELAY=3
CONFIG_SILENT_CONSOLE=y
CONFIG_SILENT_U_BOOT_ONLY=y
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="ae3xx"
CONFIG_TARGET_ADP_AE3XX=y
+CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="ag101p"
CONFIG_TARGET_ADP_AG101P=y
+CONFIG_SYS_LOAD_ADDR=0x300000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
# CONFIG_AUTO_COMPLETE is not set
CONFIG_DEFAULT_DEVICE_TREE="ae350_32"
CONFIG_TARGET_AX25_AE350=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_TARGET_AX25_AE350=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_BOOTDELAY=3
CONFIG_RISCV_SMODE=y
CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_BOOTDELAY=3
CONFIG_TARGET_AX25_AE350=y
CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_TARGET_AX25_AE350=y
CONFIG_ARCH_RV64I=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x00200000
CONFIG_BOOTDELAY=3
CONFIG_RISCV_SMODE=y
CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80010000
CONFIG_BOOTDELAY=3
CONFIG_ARCH_RV64I=y
CONFIG_XIP=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_BOARD_INIT=y
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="amcore"
CONFIG_TARGET_AMCORE=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_BOOTDELAY=1
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DEBUG_UART_CLOCK=25000000
CONFIG_ARCH_ATH79=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
CONFIG_ARCH_ATH79=y
CONFIG_TARGET_AP143=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
CONFIG_ARCH_ATH79=y
CONFIG_TARGET_AP152=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qm-apalis"
CONFIG_TARGET_APALIS_IMX8=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis-imx8/apalis-imx8-imximage.cfg"
CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-apalis"
CONFIG_TARGET_APALIS_IMX8X=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x89000000
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/apalis-imx8x/apalis-imx8x-imximage.cfg"
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA124=y
CONFIG_TARGET_APALIS_TK1=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_BOOTDELAY=1
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA30=y
CONFIG_TARGET_APALIS_T30=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_ARCH_RMOBILE_BOARD_STRING="Armadillo-800EVA Board"
CONFIG_R8A7740=y
CONFIG_TARGET_ARMADILLO_800EVA=y
+CONFIG_SYS_LOAD_ADDR=0x44000000
CONFIG_BOOTDELAY=3
# CONFIG_CMDLINE_EDITING is not set
# CONFIG_AUTO_COMPLETE is not set
CONFIG_SPL=y
CONFIG_IDENT_STRING=" for ARNDALE"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x43e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_USE_PREBOOT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x20000
CONFIG_IDENT_STRING="\nMarvell-Aspenite DB"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ENV_SECT_SIZE=0x8000
CONFIG_DEFAULT_DEVICE_TREE="astro_mcf5373l"
CONFIG_TARGET_ASTRO_MCF5373L=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS=" console=ttyS2,115200 rootfstype=romfs loaderversion=$loaderversion"
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_DATAFLASH_CS1"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_DATAFLASH_CS3"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_BOOT_NORFLASH"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NORFLASH"
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_DATAFLASH_CS3"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G10,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_MMC"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,AT91SAM9G20EK_2MMC,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_DATAFLASH_CS1"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xffffee00
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_MMC"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9RL,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS0"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_DATAFLASH_CS1"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xfa
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2068"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTCOMMAND=y
CONFIG_DEBUG_UART_CLOCK=33333333
CONFIG_SYS_CLK_FREQ=750000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS3,115200n8"
CONFIG_DEBUG_UART_CLOCK=33333333
CONFIG_SYS_CLK_FREQ=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS3,115200n8"
CONFIG_ENV_SIZE=0x10000
CONFIG_ENV_OFFSET=0x814800
CONFIG_ENV_OFFSET_REDUND=0x824800
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTDELAY=1
CONFIG_ENV_OFFSET=0x1E0000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_ENV_OFFSET_REDUND=0x1F0000
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_BOOTDELAY=1
CONFIG_DEFAULT_DEVICE_TREE="bcm963158"
CONFIG_TARGET_BCM963158=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x10000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_RSASSA_PSS=y
CONFIG_DEFAULT_DEVICE_TREE="bcm968360bg"
CONFIG_TARGET_BCM968360BG=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x10000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
CONFIG_DEFAULT_DEVICE_TREE="bcm968580xref"
CONFIG_TARGET_BCM968580XREF=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x10000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_ENV_SIZE=0x80000
CONFIG_DEFAULT_DEVICE_TREE="ns3-board"
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_SIGNATURE_MAX_SIZE=0x20000000
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA30=y
CONFIG_TARGET_BEAVER=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" beelink"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" beelink"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_TARGET_BG0900=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200"
CONFIG_DEBUG_UART=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_ENV_OFFSET_REDUND=0x220000
CONFIG_TARGET_BK4R1=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_ARCH_RMOBILE_BOARD_STRING="Blanche"
CONFIG_R8A7792=y
CONFIG_TARGET_BLANCHE=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_HUSH_PARSER=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff88000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x50000
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=0
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=0
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPI_BOOT=y
CONFIG_SPL_SPI_SUPPORT=y
# CONFIG_CMD_BMODE is not set
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x10700000
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
CONFIG_SPI_BOOT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=0
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x50000
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=0
CONFIG_MACH_S900=y
CONFIG_IDENT_STRING="\nBubblegum-96"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x7ffc0
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyOWL5,115200n8"
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA30=y
CONFIG_TARGET_CARDHU=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_TEGRA124=y
CONFIG_TARGET_CEI_TK1_SOM=y
CONFIG_ARMV7_PSCI_0_1=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-mickey.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-gru-bob.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-jerry.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-minnie.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_PAYLOAD="u-boot.img"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-veyron-speedy.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL=y
CONFIG_ARCH_JZ47XX=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_FIT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS4,115200 rw rootwait root=/dev/mmcblk0p1"
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="cobra5272"
CONFIG_TARGET_COBRA5272=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
# CONFIG_CMDLINE_EDITING is not set
CONFIG_DEFAULT_DEVICE_TREE="fsl-imx8qxp-colibri"
CONFIG_TARGET_COLIBRI_IMX8X=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri-imx8x/colibri-imx8x-imximage.cfg"
CONFIG_LOG=y
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0xa0000000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=tty0 console=ttyS0,115200"
CONFIG_SYS_DEVICE_NULLDEV=y
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_COLIBRI_T20=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA30=y
CONFIG_TARGET_COLIBRI_T30=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-colibri"
CONFIG_TARGET_COLIBRI_VF=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x80008000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/toradex/colibri_vf/imximage.cfg,IMX_NAND"
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_OF_BOARD_FIXUP=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SYS_LOAD_ADDR=0x10000000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SYS_LOAD_ADDR=0x10000000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="ca-presidio-engboard"
CONFIG_IDENT_STRING="Presidio-SoC"
+CONFIG_SYS_LOAD_ADDR=0x10000000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x180000
+CONFIG_SYS_LOAD_ADDR=0x70000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9M10G45,MACH_TYPE=2066,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s-bit"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs305-1g-4s"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s-bit"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs326-24g-2s"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s-bit"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-crs328-4c-20s-4s"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_MACH_S700=y
CONFIG_IDENT_STRING="\ncubieboard7"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x7ffc0
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyOWL3,115200n8"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-d2net"
CONFIG_IDENT_STRING=" D2 v2"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="D2NET_V2"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
CONFIG_BOOTDELAY=3
CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb"
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="da850-evm"
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="mem=32M console=ttyS2,115200n8 root=/dev/mtdblock2 rw noinitrd ip=dhcp"
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_SYS_EXTRA_OPTIONS="MAC_ADDR_IN_SPIFLASH"
CONFIG_BOOTDELAY=3
CONFIG_DEFAULT_FDT_FILE="da850-evm.dtb"
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA114=y
CONFIG_TARGET_DALMORE=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=200000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_DEFAULT_DEVICE_TREE="armada-xp-db-xc3-24g4xg"
CONFIG_BUILD_TARGET="u-boot.kwb"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_ENV_OFFSET_REDUND=0x2000
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/siemens/capricorn/imximage.cfg"
CONFIG_SPL_TEXT_BASE=0x00000000
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x80008000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dns325"
CONFIG_IDENT_STRING="\nD-Link DNS-325"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dockstar"
CONFIG_IDENT_STRING="\nSeagate FreeAgent DockStar"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
CONFIG_DEFAULT_DEVICE_TREE="dragonboard410c"
CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 410C"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_TARGET_DRAGONBOARD820C=y
CONFIG_IDENT_STRING="\nQualcomm-DragonBoard 820C"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyMSM0,115200n8"
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-dreamplug"
CONFIG_IDENT_STRING="\nMarvell-DreamPlug"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ds109"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_USE_PREBOOT=y
CONFIG_HUSH_PARSER=y
# CONFIG_CMD_FLASH is not set
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 ip=off initrd=0x8000040,8M root=/dev/md0 rw syno_hw_version=DS414r1 ihd_num=4 netif_num=2 flash_size=8 SataLedSpecial=1 HddHotplug=1"
# CONFIG_PSCI_RESET is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x90000000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200 earlycon=pl011,0x28001000 root=/dev/sda2 rw"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_TARGET_EA_LPC3250DEVKITV2=y
CONFIG_DEFAULT_DEVICE_TREE="lpc3250-ea3250"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80100000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
# CONFIG_AUTOBOOT is not set
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282"
CONFIG_TARGET_EB_CPU5282=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xFF000400"
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="eb_cpu5282_internal"
CONFIG_TARGET_EB_CPU5282=y
+CONFIG_SYS_LOAD_ADDR=0x20000
CONFIG_SYS_EXTRA_OPTIONS="SYS_MONITOR_BASE=0xF0000418"
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_TARGET_EDISON=y
CONFIG_SMP=y
CONFIG_GENERATE_ACPI_TABLE=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_LAST_STAGE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" EDMiniV2"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_DEBUG_UART_BASE=0x10210000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x62000000
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_DEFAULT_FDT_FILE="rv1108-elgin-r1.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="emsdp"
CONFIG_SYS_CLK_FREQ=40000000
+CONFIG_SYS_LOAD_ADDR=0x10000000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOARD_EARLY_INIT_R=y
CONFIG_HUSH_PARSER=y
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="exynos7420-espresso7420"
CONFIG_IDENT_STRING=" for ESPRESSO7420"
+CONFIG_SYS_LOAD_ADDR=0x43e00000
# CONFIG_AUTOBOOT is not set
CONFIG_SILENT_CONSOLE=y
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
CONFIG_ENV_SECT_SIZE=0x21000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="ethernut5"
+CONFIG_SYS_LOAD_ADDR=0x020000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9XE"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_ENV_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="ast2500-evb"
CONFIG_PRE_CON_BUF_ADDR=0x1e720000
+CONFIG_SYS_LOAD_ADDR=0x83000000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS4,115200n8 root=/dev/ram rw"
CONFIG_USE_BOOTCOMMAND=y
CONFIG_SPL=y
# CONFIG_ARMV7_NONSEC is not set
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x83000000
CONFIG_FIT=y
# CONFIG_LEGACY_IMAGE_FORMAT is not set
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_BASE=0x20068000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x60800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3036-evb.dtb"
CONFIG_DEBUG_UART_BASE=0x20068000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x60800800
CONFIG_FIT=y
CONFIG_DEFAULT_FDT_FILE="rk3128-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART_BASE=0x11030000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x61800800
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_BASE=0xFF0C0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-evb.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_BASE=0xFE660000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3568-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_DEBUG_UART_BASE=0x10210000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x62000000
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_DEFAULT_FDT_FILE="rv1108-evb.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL_STACK_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-firefly.dtb"
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-firefly.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_SYS_I2C_MXC_I2C1=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_SYS_I2C_MXC_I2C3=y
+CONFIG_SYS_LOAD_ADDR=0x80800000
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=0
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_DEBUG_UART_BASE=0xFF690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-geekbox.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ENV_OFFSET_REDUND=0x2000
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_IMX_CONTAINER_CFG="board/siemens/capricorn/uboot-container.cfg"
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/siemens/capricorn/imximage.cfg"
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-goflexnet"
CONFIG_IDENT_STRING="\nSeagate GoFlex Home"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_CONSOLE_MUX=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_BOARD_INIT=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="r7s72100-gr-peach-u-boot"
CONFIG_RZA1=y
+CONFIG_SYS_LOAD_ADDR=0x20400000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="ignore_loglevel"
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x80000
CONFIG_DEFAULT_DEVICE_TREE="at91sam9g45-gurnard"
+CONFIG_SYS_LOAD_ADDR=0x23000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G45"
CONFIG_BOOTDELAY=3
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-guruplug-server-plus"
CONFIG_IDENT_STRING="\nMarvell-GuruPlug"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_HARMONY=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SYS_PROMPT="Tegra20 (Harmony) # "
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SYS_BOOTCOUNT_ADDR=0xfff3cf0c
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_HIHOPE_RZG2=y
# CONFIG_SPL is not set
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_DEFAULT_DEVICE_TREE="hi3660-hikey960"
CONFIG_IDENT_STRING="\nHikey960"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA6,115200n8 root=/dev/mmcblk0p2 rw"
CONFIG_DEFAULT_DEVICE_TREE="hi6220-hikey"
CONFIG_IDENT_STRING="hikey"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80000
CONFIG_BOOTDELAY=10
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/mmcblk0p9 rw"
CONFIG_DEBUG_UART_CLOCK=33333333
CONFIG_SYS_CLK_FREQ=500000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_DEBUG_UART_CLOCK=33333333
CONFIG_SYS_CLK_FREQ=500000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ib62x0"
CONFIG_IDENT_STRING=" RaidSonic ICY BOX IB-NAS62x0"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-iconnect"
CONFIG_IDENT_STRING=" Iomega iConnect"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ACR_RPTCNT_4=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_TARGET_XILFPGA=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
+CONFIG_SYS_LOAD_ADDR=0x80500000
CONFIG_BOOTDELAY=5
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_SPL_PAYLOAD="u-boot.img"
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_FIT_SIGNATURE=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_OFFSET_REDUND=0xff8000
CONFIG_LTO=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_SPL_FIT_PRINT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_TARGET_IMX8MQ_PHANBELL=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL=y
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qm_mek/uboot-container.cfg"
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qm_mek/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_GENERATOR="arch/arm/mach-imx/mkimage_fit_atf.sh"
CONFIG_SPL=y
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_IMX_CONTAINER_CFG="board/freescale/imx8qxp_mek/uboot-container.cfg"
+CONFIG_SYS_LOAD_ADDR=0x80280000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/imx8qxp_mek/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x88000000
CONFIG_SPL_LOAD_IMX_CONTAINER=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80480000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=0
CONFIG_SPL_SIZE_LIMIT=0x20000
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x20209000
CONFIG_SD_BOOT=y
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SIZE_LIMIT=0x20000
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x20209000
CONFIG_SD_BOOT=y
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-is2"
CONFIG_IDENT_STRING=" IS v2"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="INETSPACE_V2"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_CM720T=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x8000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CM920T=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x8000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CM926EJ_S=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x8000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_CM946ES=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x8000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAM0 console=tty"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x2000
CONFIG_ENV_SECT_SIZE=0x40000
+CONFIG_SYS_LOAD_ADDR=0x7fc0
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock0 console=ttyAMA0 console=tty ip=dhcp netdev=27,0,0xfc800000,0xfc800010,eth0 video=clcdfb:0"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEFAULT_DEVICE_TREE="iot_devkit"
CONFIG_SYS_CLK_FREQ=16000000
CONFIG_LOCALVERSION="-iotdk-1.0"
+CONFIG_SYS_LOAD_ADDR=0x30000000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_SYS_PROMPT="IoTDK# "
# CONFIG_CMD_BOOTD is not set
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA124=y
CONFIG_TARGET_JETSON_TK1=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge-captain.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-khadas-edge-v.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim2"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim3"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim3l"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" khadas-vim"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0x2000
CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood 128M16"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_128M16"
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0x2000
CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD"
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0x2000
CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood PCI"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_PCI"
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_LCRR_DBYP_PLL_BYPASSED=y
CONFIG_LCRR_EADC_2=y
CONFIG_LCRR_CLKDIV_4=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0xD0000
CONFIG_IDENT_STRING="\nHitachi Power Grids COGE5UN"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="KM_COGE5UN"
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_LCRR_DBYP_PLL_BYPASSED=y
CONFIG_LCRR_EADC_2=y
CONFIG_LCRR_CLKDIV_4=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0xD0000
CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="KM_NUSA"
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_BOOTCOUNT_BOOTLIMIT=3
CONFIG_ENV_OFFSET_REDUND=0xD0000
CONFIG_IDENT_STRING="\nHitachi Power Grids Kirkwood"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="KM_SUSE2"
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n"
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SYS_EXTRA_OPTIONS="KMTEGR1"
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_BOARD_INIT=y
# CONFIG_PSCI_RESET is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_USE_SPL_FIT_GENERATOR is not set
CONFIG_DEFAULT_DEVICE_TREE="imx53-kp"
CONFIG_ENV_OFFSET_REDUND=0x102000
# CONFIG_CMD_BMODE is not set
+CONFIG_SYS_LOAD_ADDR=0x72000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53loco/imximage.cfg"
CONFIG_DEBUG_UART_BASE=0x20068000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x60800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3036-kylin.dtb"
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_ARCH_RMOBILE_BOARD_STRING="KMC KZM-A9-GT"
CONFIG_TARGET_KZM9G=y
+CONFIG_SYS_LOAD_ADDR=0x43000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/null console=ttySC4,115200"
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_BOARD_INIT=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-leez-p710.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_STACK_R=y
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="da850-lego-ev3"
+CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_BOOTDELAY=0
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds - press 'l' to stop...\n"
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" libretech-ac"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" libretech-cc"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" libretech-cc-v2"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" libretech-s905d-pc"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" libretech-s912-pc"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-iot-duart"
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="QSPI_BOOT"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SD_BOOT,SD_BOOT_QSPI"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-lpuart"
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-qds-duart"
CONFIG_FSL_USE_PCA9547_MUX=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SD_BOOT"
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SD_BOOT,SD_BOOT_QSPI"
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-tsn"
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_SPL=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-lpuart"
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="ls1021a-twr-duart"
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPL=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPL=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lschlv2"
CONFIG_IDENT_STRING=" LS-CHLv2"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_API=y
CONFIG_SYS_EXTRA_OPTIONS="LSCHLV2"
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-lsxhl"
CONFIG_IDENT_STRING=" LS-XHL"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_API=y
CONFIG_SYS_EXTRA_OPTIONS="LSXHL"
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_SYS_BOOTCOUNT_SINGLEWORD=y
CONFIG_ENV_OFFSET_REDUND=0x180000
# CONFIG_CMD_BMODE is not set
+CONFIG_SYS_LOAD_ADDR=0x70800000
CONFIG_FIT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/menlo/m53menlo/imximage.cfg"
CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
CONFIG_TARGET_MALTA=y
CONFIG_CPU_MIPS64_R2=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff81000000
# CONFIG_AUTOBOOT is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_BUILD_TARGET="u-boot-swap.bin"
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_CPU_MIPS64_R2=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff81000000
# CONFIG_AUTOBOOT is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_DEFAULT_DEVICE_TREE="mti,malta"
CONFIG_TARGET_MALTA=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
# CONFIG_AUTOBOOT is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_TARGET_MALTA=y
CONFIG_BUILD_TARGET="u-boot-swap.bin"
CONFIG_SYS_LITTLE_ENDIAN=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
# CONFIG_AUTOBOOT is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_MEDCOM_WIDE=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_ENV_SECT_SIZE=0x210
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_LOAD_ADDR=0x20100000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_ENV_OFFSET=0xC0000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_LOAD_ADDR=0x20100000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_NANDFLASH"
CONFIG_BOOTDELAY=3
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=-1
CONFIG_RISCV_SMODE=y
CONFIG_SBI_V01=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-miqi.dtb"
CONFIG_SOC_JR2=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_ARCH_MSCC=y
CONFIG_SYS_LITTLE_ENDIAN=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_SOC_SERVAL=y
CONFIG_DDRTYPE_H5TQ1G63BFA=y
CONFIG_SYS_LITTLE_ENDIAN=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_ARCH_MSCC=y
CONFIG_SOC_SERVALT=y
CONFIG_SYS_LITTLE_ENDIAN=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x80010000
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x80010000
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_SPL_SYS_MALLOC_SIMPLE=y
CONFIG_DEBUG_UART_BASE=0x11002000
CONFIG_DEBUG_UART_CLOCK=25000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x4007ff28
CONFIG_FIT=y
CONFIG_DEFAULT_FDT_FILE="mt7622-rfb"
CONFIG_LOGLEVEL=7
CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc"
CONFIG_TARGET_MT7623=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x84000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=3
CONFIG_DEFAULT_DEVICE_TREE="mt7623n-bananapi-bpi-r2"
CONFIG_TARGET_MT7623=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x84000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=3
CONFIG_BOARD_MT7628_RFB=y
CONFIG_RESTORE_EXCEPTION_VECTOR_BASE=y
CONFIG_MIPS_BOOT_FDT=y
+CONFIG_SYS_LOAD_ADDR=0x80010000
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_SPL_PAYLOAD="u-boot-lzma.img"
CONFIG_BUILD_TARGET="u-boot-mtk.bin"
CONFIG_SPL_IMAGE="spl/u-boot-spl-mtk.bin"
+CONFIG_SYS_LOAD_ADDR=0x42007f1c
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=26000000
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x4c000000
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="mt8512-bm1-emmc"
CONFIG_TARGET_MT8512=y
+CONFIG_SYS_LOAD_ADDR=0x41000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DEFAULT_FDT_FILE="mt8512-bm1-emmc.dtb"
CONFIG_DEBUG_UART_CLOCK=26000000
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x4c000000
CONFIG_FIT=y
# CONFIG_FIT_SHA256 is not set
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_ENV_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="mt8518-ap1-emmc"
CONFIG_TARGET_MT8518=y
+CONFIG_SYS_LOAD_ADDR=0x41000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DEFAULT_FDT_FILE="mt8518-ap1-emmc.dtb"
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x6000000
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x6000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autoboot in %d seconds, to stop use 's' key\n"
CONFIG_AUTOBOOT_STOP_STR="s"
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_TARGET_MX23EVK=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_TARGET_MX28EVK=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_SYS_EXTRA_OPTIONS="MXS_AUART,MXS_AUART_BASE=MXS_UARTAPP3_BASE"
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_TARGET_MX28EVK=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_FIT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x380000
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_TARGET_MX28EVK=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x42000000
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx51-babbage"
# CONFIG_CMD_BMODE is not set
+CONFIG_SYS_LOAD_ADDR=0x92000000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx51evk/imximage.cfg"
CONFIG_USE_PREBOOT=y
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
# CONFIG_CMD_BMODE is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x70010000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/beckhoff/mx53cx9020/imximage.cfg"
CONFIG_BOOTDELAY=1
CONFIG_USE_PREBOOT=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-qsb"
# CONFIG_CMD_BMODE is not set
+CONFIG_SYS_LOAD_ADDR=0x72000000
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx53loco/imximage.cfg"
CONFIG_USE_PREBOOT=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-ppd"
CONFIG_BOOTCOUNT_BOOTLIMIT=10
+CONFIG_SYS_LOAD_ADDR=0x72000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com"
CONFIG_LDO_ENABLED_MODE=y
CONFIG_TARGET_MX7ULP_COM=y
+CONFIG_SYS_LOAD_ADDR=0x60800000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/ea/mx7ulp_com/imximage.cfg"
CONFIG_DEFAULT_FDT_FILE="imx7ulp-com"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
CONFIG_TARGET_MX7ULP_EVK=y
+CONFIG_SYS_LOAD_ADDR=0x60800000
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk"
CONFIG_TARGET_MX7ULP_EVK=y
+CONFIG_SYS_LOAD_ADDR=0x60800000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx7ulp_evk/imximage.cfg"
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopc-t4.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" nanopi-k2"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4-2gb.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-m4b.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-neo4.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-nanopi-r4s.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-blackarmor-nas220"
CONFIG_IDENT_STRING="\nNAS 220"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-net2big"
CONFIG_IDENT_STRING=" 2Big v2"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="NET2BIG_V2"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2lite"
CONFIG_IDENT_STRING=" NS v2 Lite"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_LITE_V2"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2max"
CONFIG_IDENT_STRING=" NS Max v2"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MAX_V2"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2mini"
CONFIG_IDENT_STRING=" NS v2 Mini"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_MINI_V2"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-ns2"
CONFIG_IDENT_STRING=" NS v2"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="NETSPACE_V2"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_OPTIMIZE_INLINING=y
CONFIG_LTO=y
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x80000000
# CONFIG_FIT is not set
CONFIG_BOOTDELAY=30
CONFIG_AUTOBOOT_KEYED=y
CONFIG_ENV_OFFSET=0xE0000
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-nsa310s"
CONFIG_IDENT_STRING="\nZyXEL NSA310S/320S 1/2-Bay Power Media Server"
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DEBUG_UART_CLOCK=70000000
CONFIG_SYS_CLK_FREQ=70000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_DEBUG_UART_CLOCK=70000000
CONFIG_SYS_CLK_FREQ=70000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_DEBUG_UART_CLOCK=70000000
CONFIG_SYS_CLK_FREQ=70000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_DEBUG_UART_CLOCK=70000000
CONFIG_SYS_CLK_FREQ=70000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_TEGRA124=y
CONFIG_TARGET_NYAN_BIG=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x82408000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_MIPS_RELOCATION_TABLE_SIZE=0xc000
CONFIG_DEBUG_UART=y
CONFIG_OF_BOARD_FIXUP=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_BOARD_LATE_INIT=y
CONFIG_HUSH_PARSER=y
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_OF_BOARD_FIXUP=y
+CONFIG_SYS_LOAD_ADDR=0xffffffff80100000
CONFIG_SYS_CONSOLE_ENV_OVERWRITE=y
# CONFIG_SYS_DEVICE_NULLDEV is not set
CONFIG_ARCH_MISC_INIT=y
CONFIG_DEBUG_UART_BASE=0x87e028000000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x4000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x4000000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x2800000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x2800000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" odroid-c2"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" odroid-c4/hc4"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" odroid-n2/n2-plus"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_IDENT_STRING=" for ODROID-XU3/XU4/HC1/HC2"
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x43e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_DEFAULT_DEVICE_TREE="exynos4412-odroid"
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x43e00000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_MMC_SUPPORT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0xc0700000
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=3
# CONFIG_DISPLAY_CPUINFO is not set
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_ENV_VARS_UBOOT_CONFIG=y
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x87000000
# CONFIG_LEGACY_IMAGE_FORMAT is not set
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_SYS_PROMPT="openpiton$ "
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_ENV_VARS_UBOOT_CONFIG=y
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x87000000
# CONFIG_LEGACY_IMAGE_FORMAT is not set
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
# CONFIG_SPL_LEGACY_IMAGE_SUPPORT is not set
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-base"
CONFIG_IDENT_STRING="\nOpenRD-Base"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_BASE"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-client"
CONFIG_IDENT_STRING="\nOpenRD-Client"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_CLIENT"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-openrd-ultimate"
CONFIG_IDENT_STRING="\nOpenRD-Ultimate"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_SYS_EXTRA_OPTIONS="BOARD_IS_OPENRD_ULTIMATE"
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-orangepi.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
CONFIG_SPL=y
CONFIG_IDENT_STRING=" for ORIGEN"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x43e00000
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_SYS_CONSOLE_IS_IN_ENV=y
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" p200"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" p201"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" p212"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_CONSOLE_MUX=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_OFFSET=0xFFFFE000
CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-0000"
CONFIG_TEGRA210=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2371-2180"
CONFIG_TEGRA210=y
CONFIG_TARGET_P2371_2180=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_DEFAULT_DEVICE_TREE="tegra210-p2571"
CONFIG_TEGRA210=y
CONFIG_TARGET_P2571=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_ENV_OFFSET=0xFFFFE000
CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-000"
CONFIG_TEGRA186=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_ENV_OFFSET=0xFFFFE000
CONFIG_DEFAULT_DEVICE_TREE="tegra186-p2771-0000-500"
CONFIG_TEGRA186=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_DEFAULT_DEVICE_TREE="tegra210-p3450-0000"
CONFIG_TEGRA210=y
CONFIG_TARGET_P3450_0000=y
+CONFIG_SYS_LOAD_ADDR=0x80080000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_PAZ00=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SYS_PROMPT="Tegra20 (Paz00) MOD # "
CONFIG_DEFAULT_DEVICE_TREE="vf610-pcm052"
CONFIG_ENV_OFFSET_REDUND=0xC0000
CONFIG_TARGET_PCM052=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/phytec/pcm052/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" for Peach-Pi"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x23e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" for Peach-Pit"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x23e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x3E0000
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_SPL_IMX_ROMAPI_LOADADDR=0x48000000
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-phycore-rdk.dtb"
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x88500000
CONFIG_BOOTDELAY=5
CONFIG_SYS_PROMPT="dask # "
# CONFIG_CMD_SAVEENV is not set
CONFIG_TARGET_PICO_IMX8MQ=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-pinebook-pro.dtb"
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_PLUTUX=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9261ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9261"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="at91sam9263ek"
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-pogo_e02"
CONFIG_IDENT_STRING="\nPogo E02"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_DEFAULT_DEVICE_TREE="hi3798cv200-poplar"
CONFIG_IDENT_STRING="poplar"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x800000
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_PROMPT="poplar# "
CONFIG_CMD_MMC=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-popmetal.dtb"
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_BOARD_INIT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_MISC_INIT_R=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x600
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
CONFIG_ENV_SIZE=0x20000
CONFIG_TARGET_QEMU_VIRT=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_TARGET_QEMU_VIRT=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_TARGET_QEMU_VIRT=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_DISPLAY_CPUINFO=y
CONFIG_TARGET_QEMU_VIRT=y
CONFIG_ARCH_RV64I=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_DISPLAY_BOARDINFO=y
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr};"
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x80200000
CONFIG_DISPLAY_CPUINFO=y
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40200000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_ARMV7_LPAE=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40200000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_DEFAULT_DEVICE_TREE="sh7751-r2dplus"
CONFIG_TARGET_R2DPLUS=y
+CONFIG_SYS_LOAD_ADDR=0x8e000000
CONFIG_BOOTDELAY=-1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttySC0,115200"
CONFIG_TARGET_BEACON_RZG2M=y
# CONFIG_SPL is not set
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_TARGET_BEACON_RZG2N=y
# CONFIG_SPL is not set
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_TARGET_BEACON_RZG2H=y
# CONFIG_SPL is not set
CONFIG_LTO=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_EAGLE=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_CONDOR=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_EBISU=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_DRAAK=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_TARGET_FALCON=y
# CONFIG_PSCI_RESET is not set
CONFIG_ARMV8_PSCI=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_SALVATOR_X=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_TEXT_BASE=0xe6338000
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_ULCB=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_BASE=0xFF0C0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4b.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock-pi-4c.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399pro-rock-pi-n10.dtb"
# CONFIG_CONSOLE_MUX is not set
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_SILENT_CONSOLE=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-rock2-square.dtb"
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_DEBUG_UART_BASE=0xFF1A0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rock960.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_DEBUG_UART_BASE=0x20064000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x60800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3188-radxarock.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-zero-w"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="bcm2836-rpi-2-b"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b-plus"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="bcm2837-rpi-3-b"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ENV_SIZE=0x4000
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="pci enum; usb start;"
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ENV_SIZE=0x4000
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="pci enum; usb start;"
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_ENV_SIZE=0x4000
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="pci enum; usb start;"
CONFIG_ENV_SIZE=0x4000
CONFIG_DEFAULT_DEVICE_TREE="bcm2835-rpi-b"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" s400"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_ROOT_DEV=1
CONFIG_BOOT_PART=1
CONFIG_ROOT_PART=2
+CONFIG_SYS_LOAD_ADDR=0x71080000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-goni"
CONFIG_TARGET_S5P_GONI=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x34000000
# CONFIG_AUTOBOOT is not set
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock8 rootfstype=ext4 ${console} ${meminfo} ${mtdparts}"
CONFIG_ENV_OFFSET=0x7000
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-universal_c210"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x44800000
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="Please use defined boot"
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
CONFIG_DEBUG_UART_BASE=0xfffff200
CONFIG_DEBUG_UART_CLOCK=200000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=200000000
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=200000000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_QSPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_SD_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_SD_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_SD_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_QSPI_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_SD_BOOT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_QSPI_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_SD_BOOT=y
CONFIG_DEBUG_UART_CLOCK=82000000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_SD_BOOT=y
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2"
CONFIG_NAND_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
CONFIG_SD_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
CONFIG_SD_BOOT=y
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
CONFIG_QSPI_BOOT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=132000000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_LIBDISK_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_ENV_OFFSET_REDUND=0x100000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_NAND_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_DEBUG_UART_CLOCK=200000000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x62000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_USE_BOOTARGS=y
CONFIG_DEBUG_UART_CLOCK=200000000
CONFIG_DEBUG_UART=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x62000000
CONFIG_FIT=y
CONFIG_SD_BOOT=y
CONFIG_USE_BOOTARGS=y
CONFIG_SANDBOX64=y
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_RSASSA_PSS=y
CONFIG_BOOTSTAGE_STASH_ADDR=0x0
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SANDBOX_SPL=y
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SANDBOX_SPL=y
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_SEABOARD=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_SYS_PROMPT="Tegra20 (SeaBoard) # "
CONFIG_IDENT_STRING=" sei510"
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="run load_logo"
CONFIG_IDENT_STRING=" sei610"
# CONFIG_PSCI_RESET is not set
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_PREBOOT="run load_logo"
# CONFIG_MIPS_BOOT_ENV_LEGACY is not set
CONFIG_MIPS_BOOT_FDT=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_DISPLAY_CPUINFO=y
CONFIG_HUSH_PARSER=y
CONFIG_DEBUG_UART_BASE=0xFF1b0000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3368-sheep.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEFAULT_DEVICE_TREE="kirkwood-sheevaplug"
CONFIG_IDENT_STRING="\nMarvell-Sheevaplug"
# CONFIG_SYS_MALLOC_F is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_BOARDINFO is not set
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000
CONFIG_DEFAULT_FDT_FILE="sifive/hifive-unleashed-a00.dtb"
CONFIG_RISCV_SMODE=y
# CONFIG_SPL_USE_ARCH_MEMMOVE is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x80200000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT_ADDRESS=0x84000000
CONFIG_DEFAULT_FDT_FILE="sifive/hifive-unmatched-a00.dtb"
CONFIG_SPL_TEXT_BASE=0xe6318000
CONFIG_RCAR_GEN3=y
CONFIG_TARGET_SILINUX_EK874=y
+CONFIG_SYS_LOAD_ADDR=0x58000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_BOARD_INIT=y
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_TARGET_SIPEED_MAIX=y
CONFIG_ARCH_RV64I=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
CONFIG_STACK_SIZE=0x100000
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run k210_bootcmd"
CONFIG_TARGET_SIPEED_MAIX=y
CONFIG_ARCH_RV64I=y
CONFIG_RISCV_SMODE=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
CONFIG_STACK_SIZE=0x100000
CONFIG_USE_BOOTCOMMAND=y
CONFIG_BOOTCOMMAND="run k210_bootcmd"
CONFIG_SPL_SYS_MALLOC_F_LEN=0x400
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x180000
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
CONFIG_BOOTDELAY=3
CONFIG_SPL=y
CONFIG_IDENT_STRING=" for SMDK5250"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x43e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_SPL=y
CONFIG_IDENT_STRING=" for SMDK5420"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x23e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_DEFAULT_DEVICE_TREE="s5pc1xx-smdkc100"
CONFIG_TARGET_SMDKC100=y
CONFIG_IDENT_STRING=" for SMDKC100"
+CONFIG_SYS_LOAD_ADDR=0x30000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="root=/dev/mtdblock5 ubi.mtd=4 rootfstype=cramfs console=ttySAC0,115200n8 mem=128M mtdparts=s3c-onenand:256k(bootloader),128k@0x40000(params),3m@0x60000(kernel),16m@0x360000(test),-(UBI)"
CONFIG_SPL=y
CONFIG_IDENT_STRING=" for SMDKC210/V310"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x43e00000
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_SPL_FRAMEWORK is not set
CONFIG_SYS_PROMPT="SMDKV310 # "
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x80000
+CONFIG_SYS_LOAD_ADDR=0x23000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9260"
CONFIG_BOOTDELAY=3
CONFIG_NR_DRAM_BANKS=1
CONFIG_ENV_SIZE=0x40000
CONFIG_ENV_OFFSET=0x80000
+CONFIG_SYS_LOAD_ADDR=0x23000000
CONFIG_FIT=y
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20"
CONFIG_BOOTDELAY=3
CONFIG_IDENT_STRING=" for snow"
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x43e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
CONFIG_IDENT_STRING="socfpga_agilex"
CONFIG_SPL_FS_FAT=y
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_FIT=y
CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_IDENT_STRING="socfpga_agilex"
CONFIG_SPL_FS_FAT=y
# CONFIG_PSCI_RESET is not set
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon"
CONFIG_TARGET_SOCFPGA_AGILEX_SOCDK=y
CONFIG_IDENT_STRING="socfpga_agilex"
CONFIG_SPL_FS_FAT=y
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_FIT=y
CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_SPL_SPI_SUPPORT is not set
CONFIG_BUILD_TARGET="u-boot-with-nand-spl.sfp"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_FIT=y
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 ubi.fm_autoconvert=1 uio_pdrv_genirq.of_id=\"idq,regbank\""
CONFIG_TARGET_SOCFPGA_STRATIX10_SOCDK=y
CONFIG_IDENT_STRING="socfpga_stratix10"
CONFIG_SPL_FS_FAT=y
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_FIT=y
CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
# CONFIG_PSCI_RESET is not set
CONFIG_OPTIMIZE_INLINING=y
CONFIG_SPL_OPTIMIZE_INLINING=y
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="earlycon"
CONFIG_IDENT_STRING=" for spring"
CONFIG_DEBUG_UART=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x43e00000
CONFIG_FIT=y
CONFIG_FIT_BEST_MATCH=y
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_TEXT_BASE=0x100000
CONFIG_NR_DRAM_BANKS=2
CONFIG_DEFAULT_DEVICE_TREE="ste-ux500-samsung-stemmy"
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_HUSH_PARSER=y
CONFIG_CMD_CONFIG=y
CONFIG_DEFAULT_DEVICE_TREE="stih410-b2260"
CONFIG_IDENT_STRING="STMicroelectronics STiH410-B2260"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_USE_BOOTARGS=y
CONFIG_STM32F4=y
CONFIG_TARGET_STM32F429_DISCOVERY=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x90400000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 earlyprintk consoleblank=0 ignore_loglevel"
CONFIG_STM32F4=y
CONFIG_TARGET_STM32F429_EVALUATION=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x400000
CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_STM32F4=y
CONFIG_TARGET_STM32F469_DISCOVERY=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x400000
CONFIG_BOOTDELAY=3
# CONFIG_USE_BOOTCOMMAND is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x8008000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_STM32F7=y
CONFIG_TARGET_STM32F746_DISCO=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x8008000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_STM32H7=y
CONFIG_TARGET_STM32H743_DISCO=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xd0400000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_STM32H7=y
CONFIG_TARGET_STM32H743_EVAL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xd0400000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Hit SPACE in %d seconds to stop autoboot.\n"
CONFIG_STM32H7=y
CONFIG_TARGET_STM32H750_ART_PI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc1800000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
# CONFIG_ARMV7_VIRT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
# CONFIG_ARMV7_VIRT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
# CONFIG_ARMV7_VIRT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_ENV_OFFSET_REDUND=0x2C0000
# CONFIG_ARMV7_VIRT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
CONFIG_SPL_SPI_SUPPORT=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_ENV_OFFSET_REDUND=0x4C0000
CONFIG_TYPEC_STUSB160X=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_SPL_SPI_SUPPORT=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its"
CONFIG_SPL_SPI_SUPPORT=y
# CONFIG_ARMV7_VIRT is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its"
CONFIG_ENV_OFFSET_REDUND=0x2C0000
CONFIG_TYPEC_STUSB160X=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0xc2000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=1
CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="stmark2"
CONFIG_TARGET_STMARK2=y
+CONFIG_SYS_LOAD_ADDR=0x40010000
CONFIG_SYS_EXTRA_OPTIONS="CF_SBF,SYS_SERIAL_BOOT,SYS_INPUT_CLKSRC=30000000"
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/ram0 rw rootfstype=ramfs rdinit=/bin/init devtmpfs.mount=1"
CONFIG_SPL=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
+CONFIG_SYS_LOAD_ADDR=0x50000000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_SPL_BOARD_INIT=y
CONFIG_ENV_OFFSET=0x30000
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_DEFAULT_DEVICE_TREE="stv0991"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_SYS_EXTRA_OPTIONS="STV0991"
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_DEFAULT_DEVICE_TREE="synquacer-sc2a11-developerbox"
CONFIG_TARGET_DEVELOPERBOX=y
CONFIG_AHCI=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
CONFIG_FIT=y
CONFIG_BOOTSTAGE_STASH_SIZE=4096
CONFIG_HUSH_PARSER=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9G20,MACH_TYPE=2067"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_ENV_SIZE=0x800
CONFIG_DEFAULT_DEVICE_TREE="abilis_tb100"
CONFIG_SYS_CLK_FREQ=500000000
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200n8"
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA30=y
CONFIG_TARGET_TEC_NG=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_TEC=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_FIT=y
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_PREBOOT=y
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI_SUPPORT=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_BOOTDELAY=3
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press \"<Esc><Esc>\" to stop\n"
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" for Cavium Thunder CN88XX ARM v8 Multi-Core"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x500000
CONFIG_BOOTDELAY=5
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200n8 earlycon=pl011,0x87e024000000 debug maxcpus=48 rootwait rw root=/dev/sda2 coherent_pool=16M"
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-tinker.dtb"
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
# CONFIG_ANDROID_BOOT_IMAGE is not set
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-tinker-s.dtb"
CONFIG_SYS_TEXT_BASE=0
CONFIG_ENV_SIZE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="sandbox"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_BOOTDELAY=0
CONFIG_USE_PREBOOT=y
CONFIG_SPL_STACK_R=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_BOOTDELAY=0
CONFIG_USE_PREBOOT=y
CONFIG_SPL_STACK_R=y
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_BOOTDELAY=0
CONFIG_USE_PREBOOT=y
CONFIG_SPL_STACK_R=y
CONFIG_ENV_SIZE=0x2a00000
CONFIG_DEFAULT_DEVICE_TREE="total_compute"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x90000000
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_DEFAULT_DEVICE_TREE="tplink_wdr4300"
CONFIG_ARCH_ATH79=y
CONFIG_BOARD_TPLINK_WDR4300=y
+CONFIG_SYS_LOAD_ADDR=0xa1000000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS0,115200 root=/dev/mtdblock2 rootfstype=squashfs"
CONFIG_DEFAULT_DEVICE_TREE="exynos4412-trats2"
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x43e00000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_USE_BOOTARGS=y
CONFIG_ENV_OFFSET=0x7000
CONFIG_DEFAULT_DEVICE_TREE="exynos4210-trats"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x44800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_USE_BOOTARGS=y
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_TRIMSLICE=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_OF_BOARD_FIXUP=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x800000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_ACR_PARKM_USB_I2C1_BOOT=y
CONFIG_LCRR_EADC_1=y
CONFIG_LCRR_CLKDIV_2=y
+CONFIG_SYS_LOAD_ADDR=0x100000
CONFIG_OF_BOARD_SETUP=y
CONFIG_OF_STDOUT_VIA_ALIAS=y
CONFIG_AUTOBOOT_KEYED=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" u200"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SYS_LOAD_ADDR=0x6000000
CONFIG_FIT=y
CONFIG_SPI_BOOT=y
CONFIG_USE_PREBOOT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_LOAD_ADDR=0x85000000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_USE_PREBOOT=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_LOAD_ADDR=0x85000000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_DEVICE_TREE="uniphier-ld20-ref"
CONFIG_ARCH_UNIPHIER_V8_MULTI=y
CONFIG_MICRO_SUPPORT_CARD=y
+CONFIG_SYS_LOAD_ADDR=0x85000000
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_BOOTCOMMAND="run ${bootdev}script; run ${bootdev}boot"
CONFIG_USE_PREBOOT=y
CONFIG_ENV_SECT_SIZE=0x2000
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="usb_a9263"
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SYS_EXTRA_OPTIONS="AT91SAM9263,SYS_USE_DATAFLASH"
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-usbarmory"
# CONFIG_CMD_BMODE is not set
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x72000000
# CONFIG_USE_BOOTCOMMAND is not set
CONFIG_CMD_MEMTEST=y
CONFIG_CMD_FUSE=y
CONFIG_SPL_TEXT_BASE=0x80108000
CONFIG_TEGRA124=y
CONFIG_TARGET_VENICE2=y
+CONFIG_SYS_LOAD_ADDR=0x81000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_CONSOLE_MUX=y
CONFIG_SYS_STDIO_DEREGISTER=y
CONFIG_SPL_TEXT_BASE=0x00108000
CONFIG_TEGRA20=y
CONFIG_TARGET_VENTANA=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_SYSTEM_SETUP=y
CONFIG_USE_PREBOOT=y
CONFIG_SYS_PROMPT="Tegra20 (Ventana) # "
CONFIG_SPL_DRIVERS_MISC=y
CONFIG_SPL=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x40480000
CONFIG_FIT=y
CONFIG_FIT_EXTERNAL_OFFSET=0x3000
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_SECT_SIZE=0x10000
CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x90000000
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyAMA0,115200n8 root=/dev/sda2 rw rootwait earlycon=pl011,0x7ff80000 debug user_debug=31 androidboot.hardware=juno loglevel=9"
CONFIG_ENV_SECT_SIZE=0x40000
CONFIG_IDENT_STRING=" vexpress_aemv8a"
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x90000000
CONFIG_ANDROID_BOOT_IMAGE=y
CONFIG_BOOTDELAY=1
CONFIG_USE_BOOTARGS=y
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=3
CONFIG_SYS_I2C_MXC_I2C2=y
CONFIG_DM_GPIO=y
CONFIG_DEFAULT_DEVICE_TREE="vf610-twr"
+CONFIG_SYS_LOAD_ADDR=0x82000000
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/vf610twr/imximage.cfg"
CONFIG_BOOTDELAY=3
CONFIG_LOGLEVEL=3
CONFIG_ENV_SECT_SIZE=0x1000
CONFIG_DEFAULT_DEVICE_TREE="at91-vinco"
CONFIG_ENV_VARS_UBOOT_CONFIG=y
+CONFIG_SYS_LOAD_ADDR=0x22000000
CONFIG_SPI_BOOT=y
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_ENV_VARS_UBOOT_CONFIG=y
CONFIG_SYS_BOOT_GET_CMDLINE=y
CONFIG_SYS_BOOT_GET_KBD=y
+CONFIG_SYS_LOAD_ADDR=0x80100000
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_DEBUG_UART_BASE=0xff690000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x800800
CONFIG_USE_PREBOOT=y
CONFIG_DEFAULT_FDT_FILE="rk3288-vyasa.dtb"
CONFIG_SILENT_CONSOLE=y
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_IDENT_STRING=" wetek-core2"
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_OF_BOARD_SETUP=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_MISC_INIT_R=y
CONFIG_SPL_SERIAL_SUPPORT=y
CONFIG_SPL=y
CONFIG_ENV_OFFSET_REDUND=0x120000
+CONFIG_SYS_LOAD_ADDR=0x80008000
CONFIG_BOOTDELAY=3
CONFIG_USE_BOOTARGS=y
CONFIG_BOOTARGS="console=ttyS2,115200n8"
CONFIG_DEBUG_UART_BASE=0xd0012000
CONFIG_DEBUG_UART_CLOCK=250000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x1000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SILENT_CONSOLE=y
CONFIG_SYS_TEXT_BASE=0x40080000
CONFIG_SYS_MALLOC_F_LEN=0x2000
CONFIG_IDENT_STRING=" xenguest"
+CONFIG_SYS_LOAD_ADDR=0x40000000
CONFIG_BOOTDELAY=10
CONFIG_SYS_PROMPT="xenguest# "
# CONFIG_CMD_BDI is not set
CONFIG_COUNTER_FREQUENCY=100000000
# CONFIG_PSCI_RESET is not set
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
# CONFIG_LEGACY_IMAGE_FORMAT is not set
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
CONFIG_COUNTER_FREQUENCY=100000000
# CONFIG_PSCI_RESET is not set
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_COUNTER_FREQUENCY=100000000
# CONFIG_PSCI_RESET is not set
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
# CONFIG_AUTOBOOT is not set
CONFIG_SYS_CONSOLE_INFO_QUIET=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEFINE_TCM_OCM_MMAP=y
CONFIG_COUNTER_FREQUENCY=100000000
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
CONFIG_DISTRO_DEFAULTS=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_FIT=y
CONFIG_FIT_SIGNATURE=y
CONFIG_FIT_VERBOSE=y
CONFIG_SYS_MEM_RSVD_FOR_MMU=y
CONFIG_ZYNQMP_PSU_INIT_ENABLED=y
# CONFIG_CMD_ZYNQMP is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
# CONFIG_LEGACY_IMAGE_FORMAT is not set
# CONFIG_AUTOBOOT is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL=y
# CONFIG_CMD_ZYNQMP is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
# CONFIG_AUTOBOOT is not set
CONFIG_SPL_SYS_MALLOC_F_LEN=0x600
CONFIG_SPL=y
# CONFIG_CMD_ZYNQMP is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
# CONFIG_AUTOBOOT is not set
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
# CONFIG_CMD_ZYNQMP is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
# CONFIG_AUTOBOOT is not set
CONFIG_ENV_SIZE=0x80
CONFIG_DEFAULT_DEVICE_TREE="zynqmp-mini-nand"
# CONFIG_CMD_ZYNQMP is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_FIT=y
CONFIG_SUPPORT_RAW_INITRD=y
# CONFIG_AUTOBOOT is not set
# CONFIG_CMD_ZYNQMP is not set
# CONFIG_PSCI_RESET is not set
# CONFIG_EXPERT is not set
+CONFIG_SYS_LOAD_ADDR=0x8000000
# CONFIG_LEGACY_IMAGE_FORMAT is not set
# CONFIG_AUTOBOOT is not set
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART_BASE=0xff010000
CONFIG_DEBUG_UART_CLOCK=100000000
CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x0
CONFIG_BOOTSTAGE=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SYS_PROMPT="ZynqMP r5> "
CONFIG_ZYNQMP_USB=y
CONFIG_AHCI=y
CONFIG_DISTRO_DEFAULTS=y
+CONFIG_SYS_LOAD_ADDR=0x8000000
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_XTFPGA_KC705=y
+CONFIG_SYS_LOAD_ADDR=0x02000000
CONFIG_SHOW_BOOT_PROGRESS=y
CONFIG_BOOTDELAY=10
CONFIG_AUTOBOOT_KEYED=y
CONFIG_ENV_SIZE=0x20000
CONFIG_ENV_SECT_SIZE=0x20000
CONFIG_TARGET_ZMX25=y
+CONFIG_SYS_LOAD_ADDR=0x80000000
CONFIG_BOOTDELAY=5
CONFIG_AUTOBOOT_KEYED=y
CONFIG_AUTOBOOT_PROMPT="boot in %d s\n"
CONFIG_SPL=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
# CONFIG_AUTOBOOT is not set
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_SPL=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
# CONFIG_AUTOBOOT is not set
CONFIG_USE_PREBOOT=y
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DEBUG_UART=y
CONFIG_SYS_CUSTOM_LDSCRIPT=y
CONFIG_SYS_LDSCRIPT="arch/arm/mach-zynq/u-boot.lds"
+CONFIG_SYS_LOAD_ADDR=0x0
# CONFIG_ARCH_FIXUP_FDT_MEMORY is not set
# CONFIG_AUTOBOOT is not set
CONFIG_USE_PREBOOT=y
* (which is common practice).
*/
-/*
- * MISC
- */
-#define CONFIG_SYS_LOAD_ADDR 0xcc000000 /* Half of RAM */
#endif /* __CONFIG_H */
* (which is common practice).
*/
-/*
- * MISC
- */
-#define CONFIG_SYS_LOAD_ADDR 0xd4000000 /* Half of RAM */
#endif /* __CONFIG_H */
#define CONFIG_PRAM 512 /* 512 KB */
-#define CONFIG_SYS_LOAD_ADDR 0x40010000
-
#define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */
#define CONFIG_SYS_PLL_ODR 0x36
#define CONFIG_SYS_PLL_FDR 0x7D
#define CONFIG_PRAM 512 /* 512 KB */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE+0x20000)
-
#define CONFIG_SYS_CLK 75000000
#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 2
*/
#undef CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */
-
/*
* Clock configuration: enable only one of the following options
*/
#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFFFE7FF)
#define CONFIG_SYS_I2C_PINMUX_SET (0)
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
-
#undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */
#define CONFIG_SYS_FAST_CLK
#ifdef CONFIG_SYS_FAST_CLK
"save\0" \
""
-#define CONFIG_SYS_LOAD_ADDR 0x20000
#define CONFIG_SYS_CLK 66000000
/*
#define CONFIG_SYS_I2C_PINMUX_CLR (0xFFF0)
#define CONFIG_SYS_I2C_PINMUX_SET (0x000F)
-#define CONFIG_SYS_LOAD_ADDR 0x800000
-
#define CONFIG_BOOTCOMMAND "bootm ffe40000"
#ifdef CONFIG_MCFFEC
"save\0" \
""
-#define CONFIG_SYS_LOAD_ADDR 0x20000
-
#define CONFIG_SYS_CLK 64000000
/* PLL Configuration: Ext Clock * 6 (see table 9-4 of MCF user manual) */
#define CONFIG_PRAM 512 /* 512 KB */
-#define CONFIG_SYS_LOAD_ADDR 0x40010000
-
#define CONFIG_SYS_CLK 80000000
#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
#define CONFIG_PRAM 512 /* 512 KB */
-#define CONFIG_SYS_LOAD_ADDR 0x40010000
-
#define CONFIG_SYS_CLK 80000000
#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
#define CONFIG_PRAM 512 /* 512 KB */
-#define CONFIG_SYS_LOAD_ADDR 0x40010000
-
#define CONFIG_SYS_CLK 80000000
#define CONFIG_SYS_CPU_CLK CONFIG_SYS_CLK * 3
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR 0x200000
-
#define CONFIG_SYS_HZ 1000
/* Definitions for initial stack pointer and data area (in DPRAM) */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
#define CONFIG_PHY_BASE_ADR 0x01
#endif /* CONFIG_CMD_NET */
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */
-
#endif /* _CONFIG_SBX81LIFKW_H */
#define CONFIG_PHY_BASE_ADR 0x01
#endif /* CONFIG_CMD_NET */
-#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default location for tftp and bootm */
-
#endif /* _CONFIG_SBX81LIFXCAT_H */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms tick */
/*
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
GENERATED_GBL_DATA_SIZE)
-/*
- * Load address and memory test area should agree with
- * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x300000
-
-/* memtest works on 63 MB in DRAM */
-
/*
* Static memory controller configuration
*/
GENERATED_GBL_DATA_SIZE)
#endif /* CONFIG_MEM_REMAP */
-/*
- * Load address and memory test area should agree with
- * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x300000
-
-/* memtest works on 63 MB in DRAM */
-
/*
* Static memory controller configuration
*/
"erase 0xfff00000 0xffffffff; " \
"cp.b 0x20000 0xfff00000 ${filesize}\0"
-/* undef to save memory */
-
-#define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */
-
#define CONFIG_SYS_HZ 1000
#define CONFIG_SYS_CLK 45000000
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
"${blkcnt}; fi\0"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x89000000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
#define CONFIG_NETMASK 255.255.255.0
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP 192.168.10.1
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
#define CONFIG_SYS_SDRAM_BASE (ARMADILLO_800EVA_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (ARMADILLO_800EVA_SDRAM_SIZE)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
- 64 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#endif
#endif
-/* default RAM address for user programs */
-#define CONFIG_SYS_LOAD_ADDR 0x20000
-
#define CONFIG_FPGA_COUNT 1
#define CONFIG_SYS_FPGA_PROG_FEEDBACK
#define CONFIG_SYS_FPGA_WAIT 1000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#endif
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_SYS_USE_DATAFLASH
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_RESET_PHY_R
#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_NAND_BOOT
/* bootstrap + u-boot + env in nandflash */
"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
-/* Ethernet */
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* USB host */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_ATMEL
/* Ethernet - not present */
-/* USB - not supported */
-
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_SYS_USE_DATAFLASH
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#endif
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_NAND_BOOT
/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_BOOTCOMMAND "nand read " \
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000000 - \
GENERATED_GBL_DATA_SIZE)
-/*
- * Load address and memory test area should agree with
- * arch/riscv/config.mk. Be careful not to overwrite U-Boot itself.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* SDRAM */
-
-/*
- * memtest works on 512 MB in DRAM
- */
-
-/*
- * FLASH and environment organization
- */
-
/* use CFI framework */
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
#define CONFIG_SYS_MALLOC_LEN SZ_2M
#define CONFIG_SYS_BOOTM_LEN SZ_128M
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* UART configuration
#define PHYS_SDRAM_1 V2M_BASE
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x80000)
/*
* Initial SP before reloaction is placed at end of first DRAM bank,
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
CONFIG_SYS_INIT_RAM_SIZE - \
GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_LOAD_ADDR 0x2000000
/*
* CONFIG_SYS_LOAD_ADDR - 1 MiB.
/* Boot Linux */
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTCOMMAND "bootm"
-#define CONFIG_SYS_LOAD_ADDR 0x42000000
/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
#define FSL_QSPI_FLASH_NUM 2
#define CONFIG_SYS_FSL_QSPI_LE
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_BOARD_SIZE_LIMIT 520192
#define CONFIG_SYS_SDRAM_BASE 0x80000000
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* CONFIG_USB_OHCI_HCD */
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* CONFIG_USB_OHCI_HCD */
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* CONFIG_USB_OHCI_HCD */
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_SDRAM_BASE 0x80000000
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* CONFIG_USB_OHCI_HCD */
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* CONFIG_USB_OHCI_HCD */
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* CONFIG_USB_OHCI_HCD */
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* CONFIG_USB_OHCI_HCD */
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_SDRAM_BASE 0x80000000
/* U-Boot */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + SZ_1M
#if defined(CONFIG_BMIPS_BOOT_RAM)
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x08000000)
-
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
/*
/* U-Boot */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SKIP_LOWLEVEL_INIT
/* U-Boot */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SKIP_LOWLEVEL_INIT
/* U-Boot */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_16M)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_POSTCLK_INIT
#define CONFIG_MXC_GPT_HCLK
-#define CONFIG_SYS_LOAD_ADDR 0x10700000
-
/* MMC */
#define CONFIG_FSL_USDHC
#if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_NOR_BOOT)
#define CONFIG_SKIP_LOWLEVEL_INIT
#endif /* !CONFIG_SPL_BUILD, ... */
-/*
- * Our DDR memory always starts at 0x80000000 and U-Boot shall have
- * relocated itself to higher in memory by the time this value is used.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x80000000
/*
* ----------------------------------------------------------------------------
* DDR information. We say (for simplicity) that we have 1 bank,
"reset;"
/* Default location for tftp and bootm */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
/* On CCP board, USDHC1 is for eMMC */
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* cached (KSEG0) address */
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x20000 /*Defines default RAM address
-from which user programs will be started */
-
/*---*/
/*
"vidargs=video=imxdpufb5:off video=imxdpufb6:off video=imxdpufb7:off\0"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
#undef CONFIG_SERVERIP
#define CONFIG_SERVERIP 192.168.10.1
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
-
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 1) \
#define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */
#define CONFIG_SYS_DRAM_SIZE 0x04000000 /* 64 MB DRAM */
-#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR 0x5c010000
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
-#define CONFIG_SYS_LOAD_ADDR 0x80008000
#define CONFIG_FDTADDR 0x84000000
/* We boot from the gfxRAM area of the OCRAM. */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
/* DFU class support */
#define DFU_MANIFEST_POLL_TIMEOUT 25000
-#define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6
-
/* bootstrap + u-boot + env in nandflash */
#define CONFIG_BOOTCOMMAND \
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
/*
* Linux Information
#define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE
#define CONFIG_SYS_SDRAM_SIZE SZ_64M
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K)
-
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K \
- GENERATED_GBL_DATA_SIZE)
#define CONFIG_HW_WATCHDOG
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
-
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc0,115200\0" \
#define PHYS_SDRAM_1_SIZE SZ_1G
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/* UART */
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/* Generic Timer Definitions */
#define PHYS_SDRAM_1_SIZE 0x7B000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000000)
-
/* Size of Malloc Pool */
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024 + CONFIG_ENV_SIZE)
/*
* cmd
*/
-#define CONFIG_SYS_LOAD_ADDR 0x80100000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_4K - GENERATED_GBL_DATA_SIZE)
/*
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0x20000
-
/*#define CONFIG_SYS_DRAM_TEST 1 */
#undef CONFIG_SYS_DRAM_TEST
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
/* Memory */
-#define CONFIG_SYS_LOAD_ADDR 0x100000
#define CONFIG_PHYSMEM
#define CONFIG_SYS_STACK_SIZE (32 * 1024)
* Other required minimal configurations
*/
-#define CONFIG_SYS_LOAD_ADDR 0x00800000
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000
/* Enable command line editing */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_1M)
#define CONFIG_SYS_MALLOC_LEN SZ_64K
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
/*
* Environment
/* 128MB SDRAM in 1 bank */
#define CONFIG_SYS_SDRAM_BASE 0x20000000
#define CONFIG_SYS_SDRAM_SIZE (128 << 20)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
/* 512kB on-chip NOR flash */
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
-/* Memory Info */
-#define CONFIG_SYS_LOAD_ADDR 0x83000000
-
#endif /* __CONFIG_H */
#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
-/* Memory Info */
-#define CONFIG_SYS_LOAD_ADDR 0x83000000
-
#endif /* __CONFIG_H */
/* MMC SPL */
#define COPY_BL2_FNPTR_ADDR 0x02020030
-/* specific .lds file */
-
-/* Boot Argument Buffer Size */
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
#define CONFIG_RD_LVL
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
/* select serial console configuration */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define PHYS_SDRAM_1_SIZE SDRAM_BANK_SIZE
#define PHYS_SDRAM_2 (CONFIG_SYS_SDRAM_BASE + SDRAM_BANK_SIZE)
#define CONFIG_NET_RETRY_COUNT 100
-#define CONFIG_SYS_LOAD_ADDR 0x80800000 /* loadaddr env var */
-
/*
* Ethernet on SOC (FEC)
*/
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4
#define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* SPL */
#define CONFIG_SPL_MAX_SIZE 0x7000
#define CONFIG_SPL_STACK 0x308000
/* RAM */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
-
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* SPL */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_BOOTCOMMAND MMCBOOTCOMMAND
#endif
-
-/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
-
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_SIZE (10 * 1024 * 1024)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - 1024 * 1024)
-#define CONFIG_SYS_LOAD_ADDR \
- (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
/* Malloc */
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024)
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0x800000
#define CONFIG_SYS_64BIT_LBA
/* Environment data setup
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
-
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 19000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x80000)
-
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 19000000
#define CONFIG_SYS_MALLOC_LEN SZ_2M
#define CONFIG_SYS_BOOTM_LEN SZ_128M
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* UART configuration
#define CONFIG_SYS_MALLOC_LEN SZ_2M
#define CONFIG_SYS_BOOTM_LEN SZ_128M
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* UART configuration
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0x100000
#define CONFIG_LOADS_ECHO
#define CONFIG_TIMESTAMP
#define CONFIG_BOOTCOMMAND "run boot_cramfs"
#define CONFIG_SYS_MALLOC_LEN (256 << 10)
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_LOAD_ADDR 0x80500000 /* default load address */
/*----------------------------------------------------------------------
* Commands
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* loadaddr env var */
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=eth0\0" \
"nfsargs=setenv bootargs root=/dev/nfs rw " \
#endif
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
"fi;"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
BOOTENV
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE SZ_2M
"scriptaddr=0x46000000\0"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
/* Enable Distro Boot */
#ifndef CONFIG_SPL_BUILD
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x200000
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80280000
#define CONFIG_SYS_INIT_SP_ADDR 0x80200000
"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x80480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x80000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
#define CONFIG_SYS_INIT_SP_ADDR 0x20240000
-#ifdef CONFIG_SUPPORT_SPL
-#define CONFIG_SYS_LOAD_ADDR 0x20209000
-#else
-#define CONFIG_SYS_LOAD_ADDR 0x80000000
-#endif
-
#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1
#define CONFIG_SYS_INIT_SP_ADDR 0x20280000
-#ifdef CONFIG_SUPPORT_SPL
-#define CONFIG_SYS_LOAD_ADDR 0x20209000
-#else
-#define CONFIG_SYS_LOAD_ADDR 0x80000000
-#endif
-
#define CONFIG_SYS_FSL_ERRATUM_ESDHC135 1
#define ESDHCI_QUIRK_BROKEN_TIMEOUT_VALUE 1
*/
#define CONFIG_SYS_TIMERBASE 0x13000100 /* Timer1 */
-#define CONFIG_SYS_LOAD_ADDR 0x7fc0 /* default load address */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024) /* Size of malloc() pool */
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
#define CONFIG_SYS_MALLOC_LEN SZ_64K
#define CONFIG_SYS_BOOTM_LEN SZ_128K
-#define CONFIG_SYS_LOAD_ADDR SRAM_BASE
#define ROM_BASE CONFIG_SYS_MONITOR_BASE
#define ROM_SIZE SZ_256K
/* EEprom support 24C08, 24C16, 24C64 */
#define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE
-#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
-
/* Reserve 4 MB for malloc */
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#include "asm/arch/config.h"
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
-
/* architecture specific default bootargs */
#define CONFIG_KM_DEF_BOOT_ARGS_CPU \
"bootcountaddr=${bootcountaddr} ${mtdparts}" \
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
#define CONFIG_LS102XA_STREAM_ID
#define CONFIG_SYS_INIT_SP_OFFSET \
#define SPD_EEPROM_ADDRESS 0x54
#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
-
/******************************************************************************
* (PRAM usage)
* ... -------------------------------------------------------
/* environment */
/* see include/configs/ti_armv7_common.h */
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
#define ENV_MEM_LAYOUT_SETTINGS \
"loadaddr=0x82000000\0" \
"kernel_addr_r=0x82000000\0" \
#define CONFIG_MXC_USB_FLAGS 0
/* Command definition */
-#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* loadaddr env var */
#define CONFIG_EXTRA_ENV_SETTINGS \
"console=ttymxc1,115200\0" \
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2 /* Enabled USB controller number */
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
#ifndef CONFIG_SPL_BUILD
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_SDRAM_OFFSET_FOR_RT (16 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE (KZM_SDRAM_BASE + CONFIG_SDRAM_OFFSET_FOR_RT)
#define CONFIG_SYS_SDRAM_SIZE (PHYS_SDRAM_SIZE - CONFIG_SDRAM_OFFSET_FOR_RT)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE (KZM_FLASH_BASE)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
#define CONFIG_BOOTFILE "uImage" /* Boot file name */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
/*
* Linux Information
/* RAM */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
-
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* SPL */
#else
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
#endif
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
#define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000
#define CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY 0
*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
#define CONFIG_LS102XA_STREAM_ID
#define CONFIG_SYS_INIT_SP_OFFSET \
*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
#define CONFIG_LS102XA_STREAM_ID
#define CONFIG_SYS_INIT_SP_OFFSET \
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
#define CONFIG_LS102XA_STREAM_ID
#define CONFIG_SYS_INIT_SP_OFFSET \
*/
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
#define CONFIG_LS102XA_STREAM_ID
#define CONFIG_SYS_INIT_SP_OFFSET \
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
/* Physical Memory Map */
#define CONFIG_CHIP_SELECTS_PER_CTRL 4
#endif
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#endif
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
#define CONFIG_HWCONFIG
#define HWCONFIG_BUFFER_SIZE 128
#endif
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
/* SATA */
#ifdef CONFIG_SCSI
#endif
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
/* Physical Memory Map */
/* fixme: these need to be checked against the board */
#define CONFIG_SYS_MONITOR_LEN (936 * 1024)
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000)
/* SMP Definitinos */
#define CPU_RELEASE_ADDR secondary_boot_addr
#define CONFIG_REVISION_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_BOOTFILE "boot/fitImage"
-#define CONFIG_SYS_LOAD_ADDR 0x70800000
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
/*
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x01000000)
-
#define CONFIG_SYS_MALLOC_LEN (128 * 1024)
#define CONFIG_SYS_BOOTPARAMS_LEN (128 * 1024)
#define CONFIG_SYS_BOOTM_LEN (64 * 1024 * 1024)
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_SIZE
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00100000)
-
/*
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
* leaving the correct space for initial global data structure above
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_SYS_INIT_SP_ADDR 0x20000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */
/* ROM USB boot support, auto-execute boot.scr at scriptaddr */
#define CONFIG_SYS_CBSIZE 512
/* max number of command args */
#define CONFIG_SYS_MAXARGS 15
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR 0
#define CONFIG_HOSTNAME "microblaze-generic"
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-
#define CONFIG_SYS_MALLOC_LEN SZ_8M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR 0x80010000
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \
GENERATED_GBL_DATA_SIZE)
-/* UBoot -> Kernel */
-#define CONFIG_SYS_LOAD_ADDR 0x4007ff28
-
/* DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + SZ_2M - \
GENERATED_GBL_DATA_SIZE)
-/* UBoot -> Kernel */
-#define CONFIG_SYS_LOAD_ADDR 0x84000000
-
/* MMC */
#define MMC_SUPPORTS_TUNING
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR 0x80010000
#define CONFIG_SYS_INIT_SP_OFFSET 0x80000
/* UBoot -> Kernel */
#define CONFIG_SYS_SPL_ARGS_ADDR 0x40000000
-#define CONFIG_SYS_LOAD_ADDR 0x42007f1c
/* DRAM */
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#include <linux/sizes.h>
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN SZ_4M
#define CONFIG_CPU_ARMV8
#define COUNTER_FREQUENCY 13000000
-#define CONFIG_SYS_LOAD_ADDR 0x41000000
-
#define CONFIG_SYS_MALLOC_LEN SZ_32M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#include <linux/sizes.h>
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN SZ_4M
#define CONFIG_CPU_ARMV8
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define CONFIG_SYS_SDRAM_SIZE 0x20000000
-#define CONFIG_SYS_LOAD_ADDR 0x41000000
-
#define CONFIG_SYS_MALLOC_LEN SZ_32M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/*
* Other required minimal configurations
*/
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/*
* Other required minimal configurations
*/
-#define CONFIG_SYS_LOAD_ADDR 0x06000000 /* default load adr */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/*
* Other required minimal configurations
*/
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
/* Booting Linux */
#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_SYS_LOAD_ADDR 0x42000000
/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
/* Boot Linux */
#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_SYS_LOAD_ADDR 0x42000000
/* Extra Environments */
#define CONFIG_EXTRA_ENV_SETTINGS \
/* Boot Linux */
#define CONFIG_BOOTFILE "uImage"
-#define CONFIG_SYS_LOAD_ADDR 0x42000000
/* Extra Environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
#define CONFIG_ETHPRIME "FEC0"
-#define CONFIG_SYS_LOAD_ADDR 0x92000000 /* loadaddr env var */
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
/* Command definition */
-#define CONFIG_SYS_LOAD_ADDR 0x70010000 /* loadaddr env var */
-
#define BOOT_TARGET_DEVICES(func) \
func(MMC, mmc, 0) \
func(MMC, mmc, 1) \
#define CONFIG_ETHPRIME "FEC0"
-#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* loadaddr env var */
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
/* Command definition */
-#define CONFIG_SYS_LOAD_ADDR 0x72000000 /* loadaddr env var */
-
#define PPD_CONFIG_NFS \
"nfsserver=192.168.252.95\0" \
"gatewayip=192.168.252.95\0" \
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
-/* Boot options */
-#if defined(CONFIG_MX6SL) || defined(CONFIG_MX6SLL) || \
- defined(CONFIG_MX6SX) || \
- defined(CONFIG_MX6UL) || defined(CONFIG_MX6ULL)
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-#else
-#define CONFIG_SYS_LOAD_ADDR 0x12000000
-#endif
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MAXARGS 32
/* Enable iomux-lpsr support */
#define CONFIG_IOMUX_LPSR
-#define CONFIG_SYS_LOAD_ADDR 0x80800000
-
/* Miscellaneous configurable options */
#define CONFIG_SYS_CBSIZE 512
#define CONFIG_SYS_MAXARGS 32
#define PHYS_SDRAM 0x60000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_LOAD_ADDR 0x60800000
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"image=zImage\0" \
"console=ttyLP0\0" \
#define PHYS_SDRAM_SIZE SZ_1G
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
-#define CONFIG_SYS_LOAD_ADDR 0x60800000
-
#define CONFIG_EXTRA_ENV_SETTINGS \
"script=boot.scr\0" \
"image=zImage\0" \
"run attachboot;" \
"echo"
-/* default load address */
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
-
/*
* OMAP3 has 12 GP timers, they can be driven by the system clock
* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
#define CONFIG_SYS_MALLOC_LEN SZ_2M
#define CONFIG_SYS_BOOTM_LEN SZ_32M
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* Environment configuration
/* SPI */
#define CONFIG_SPI_FLASH_SIZE (4 << 20)
-#undef CONFIG_SYS_LOAD_ADDR
-#define CONFIG_SYS_LOAD_ADDR 0x82408000
-
#include "tegra-common-usb-gadget.h"
#include "tegra-common-post.h"
#define CONFIG_SYS_SDRAM_BASE 0xffffffff80000000
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + (1 << 20))
-
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
#endif /* __OCTEON_COMMON_H__ */
/** Heap size for U-Boot */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64 * 1024 * 1024)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-
#define CONFIG_LAST_STAGE_INIT
/* Allow environment variable to be overwritten */
/** Heap size for U-Boot */
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 64 * 1024 * 1024)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-
/* Allow environment variable to be overwritten */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_SYS_MEM_TOP_HIDE (1UL << 20UL)
#define CONFIG_TZSW_RESERVED_DRAM_SIZE CONFIG_SYS_MEM_TOP_HIDE
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
#include <linux/sizes.h>
#define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run autoboot"
#define CONFIG_BOOTFILE "zImage" /* Boot file name */
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */
-#define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000)
/*
* USB Configs
/* Environment options */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32M)
-#define CONFIG_SYS_LOAD_ADDR 0x87000000
#define CONFIG_SYS_MALLOC_LEN SZ_256M
#define CONFIG_SYS_BOOTM_LEN SZ_256M
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
#define CONFIG_MACH_TYPE MACH_TYPE_ORIGEN
#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */
#define CONFIG_SYS_MALLOC_LEN (32 * 1024 * 1024)
/* Some commands use this as the default load address */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x7ffc0)
/*
* This is the initial SP which is used only briefly for relocating the u-boot
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
#define CONFIG_SYS_MAX_NAND_DEVICE 1
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_BOARD_SIZE_LIMIT 520192
"fi;"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K
"fi;"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE SZ_512K
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
-#define CONFIG_SYS_LOAD_ADDR 0x88500000 /* default load address */
#define CONFIG_SYS_ENV_ADDR 0x88300000
#define CONFIG_SYS_FDT_ADDR 0x89d00000
"else booti ${loadaddr} - ${fdt_addr}; fi"
/* Link Definitions */
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x80000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_LOAD_ADDR 0x22000000
-
#undef CONFIG_SYS_USE_DATAFLASH_CS0
#undef CONFIG_SYS_USE_NANDFLASH
#define CONFIG_SYS_USE_FLASH 1
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9263"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#define CONFIG_SYS_USE_FLASH 1
#undef CONFIG_SYS_USE_DATAFLASH
#undef CONFIG_SYS_USE_NANDFLASH
#define CONFIG_RESET_PHY_R
#define CONFIG_AT91_WANTS_COMMON_PHY
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_NAND_BOOT
/* bootstrap + u-boot + env in nandflash */
/* SYS */
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_SYS_INIT_SP_ADDR 0x200000
-#define CONFIG_SYS_LOAD_ADDR 0x800000
#define CONFIG_SYS_MALLOC_LEN SZ_32M
/* ATF bl33.bin load address (must match) */
#define CONFIG_BOOTP_BOOTFILESIZE
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (DDR_BASE + 0x10000000)
#define CONFIG_LAST_STAGE_INIT
/* SDRAM Bank #1 */
#define CONFIG_IRAM_BASE 0xff020000
#define CONFIG_SYS_INIT_SP_ADDR 0x00400000
-#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0x00400000
#define CONFIG_SPL_MAX_SIZE 0x20000
#define CONFIG_SPL_BSS_START_ADDR 0x4000000
/* The DTB generated by QEMU is placed at start of RAM, stay away from there */
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
#define CONFIG_SYS_MALLOC_LEN SZ_16M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-
#define CONFIG_SYS_MALLOC_LEN SZ_8M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_SYS_PBSIZE 256
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
/* Address of u-boot image in Flash */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_SDRAM_BASE (RCAR_GEN2_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (RCAR_GEN2_UBOOT_SDRAM_SIZE)
-#define CONFIG_SYS_LOAD_ADDR 0x50000000
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define DRAM_RSV_SIZE 0x08000000
#define CONFIG_SYS_SDRAM_BASE (0x40000000 + DRAM_RSV_SIZE)
#define CONFIG_SYS_SDRAM_SIZE (0x80000000u - DRAM_RSV_SIZE)
-#define CONFIG_SYS_LOAD_ADDR 0x58000000
#define CONFIG_VERY_BIG_RAM
#define CONFIG_MAX_MEM_MAPPED (0x80000000u - DRAM_RSV_SIZE)
#define CONFIG_SYS_HZ_CLOCK 24000000
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
-#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_SPL_STACK 0x10081fff
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (4 << 10)
#define CONFIG_IRAM_BASE 0x10080000
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
-#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
/* Bootrom will load u-boot binary to 0x60000000 once return from SPL */
#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
-#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (0x8000 - 0x800)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK31"
#define CONFIG_SYS_HZ_CLOCK 24000000
#define CONFIG_SYS_INIT_SP_ADDR 0x61100000
-#define CONFIG_SYS_LOAD_ADDR 0x61800800
#define CONFIG_SPL_MAX_SIZE 0x100000
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (28 << 10)
/* Bootrom will load u-boot binary to 0x0 once return from SPL */
#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x00100000
-#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0xff718000
#define CONFIG_IRAM_BASE 0xff700000
#define CONFIG_ROCKCHIP_STIMER_BASE 0xff1b00a0
#define CONFIG_IRAM_BASE 0xfff80000
#define CONFIG_SYS_INIT_SP_ADDR 0x00800000
-#define CONFIG_SYS_LOAD_ADDR 0x00C00800
#define CONFIG_SPL_STACK 0x00400000
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
-#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_STACK 0x00400000
#define CONFIG_SPL_MAX_SIZE 0x40000
#define CONFIG_SPL_BSS_START_ADDR 0x2000000
#define CONFIG_IRAM_BASE 0xff8c0000
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
-#define CONFIG_SYS_LOAD_ADDR 0x00800800
#define CONFIG_SPL_MAX_SIZE 0x40000
#define CONFIG_SPL_BSS_START_ADDR 0x400000
#define CONFIG_IRAM_BASE 0xff8c0000
#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
-#define CONFIG_SYS_LOAD_ADDR 0x00800800
#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
#define CONFIG_SPL_STACK 0x00400000
#define CONFIG_IRAM_BASE 0xfdcc0000
#define CONFIG_SYS_INIT_SP_ADDR 0x00c00000
-#define CONFIG_SYS_LOAD_ADDR 0x00c00800
#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
#define CONFIG_SYS_SDRAM_BASE 0
#define CONFIG_SYS_CBSIZE 1024
/* Environment */
-#define CONFIG_SYS_LOAD_ADDR 0x1000000
/* Shell */
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0x100000)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x2000000)
/* rockchip ohci host driver */
#define CONFIG_USB_OHCI_NEW
#define BMP_LOAD_ADDR 0x78000000
/* kernel load address */
-#define CONFIG_SYS_LOAD_ADDR 0x71080000
#define INITRD_START 0x79000000
#define KERNEL_DTB_ADDR 0x7A000000
"dfu_alt_info=" CONFIG_DFU_ALT "\0"
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4000000)
/* Goni has 3 banks of DRAM, but swap the bank */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* OneDRAM Bank #0 */
#define CONFIG_SYS_MONITOR_BASE 0x00000000
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-
/* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
#define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
#define CONFIG_SYS_NAND_ONFI_DETECTION
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#ifdef CONFIG_SD_BOOT
/* bootstrap + u-boot + env + linux in sd card */
#define CONFIG_BOOTCOMMAND \
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_SD_BOOT
/* bootstrap + u-boot + env in sd card */
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* SPL */
#define CONFIG_SPL_TEXT_BASE 0x200000
#define CONFIG_SPL_MAX_SIZE 0x10000
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* NAND flash */
/* SPI flash */
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* NAND Flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* SerialFlash */
#ifdef CONFIG_SD_BOOT
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* SPL */
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 3
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* SPL */
#define CONFIG_SPL_MAX_SIZE 0x18000
#define CONFIG_SPL_BSS_START_ADDR 0x20000000
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_SYS_MAX_NAND_DEVICE 1
GENERATED_GBL_DATA_SIZE)
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x62000000 /* load address */
-
#undef CONFIG_BOOTCOMMAND
#ifdef CONFIG_SD_BOOT
/* u-boot env in sd/mmc card */
#define CONFIG_I2C_EDID
-/* Memory things - we don't really want a memory test */
-#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_FDT_LOAD_ADDR 0x100
#define CONFIG_PHYSMEM
* start addr of ram disk
*/
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
-
/* Physical Memory Map */
#define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-
#define CONFIG_SYS_MALLOC_LEN SZ_8M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#define CONFIG_SYS_SDRAM_BASE 0x80000000
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_2M)
-
#define CONFIG_SYS_MALLOC_LEN SZ_8M
#define CONFIG_SYS_BOOTM_LEN SZ_64M
#include <linux/sizes.h>
-#define CONFIG_SYS_LOAD_ADDR 0x80000000
/* Start just below the second bank so we don't clobber it during reloc */
#define CONFIG_SYS_INIT_SP_ADDR 0x803FFFFF
#define CONFIG_SYS_MALLOC_LEN SZ_128K
#define CONFIG_BOOTCOMMAND "run flashboot"
#define CONFIG_SYS_CBSIZE 512
-/*
- * RAM Memory address where to put the
- * Linux Kernel befor starting.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x22000000
-
/*
* The NAND Flash partitions:
*/
* Miscellaneous configurable options
*/
#define CONFIG_SYS_PBSIZE 384 /* Print Buffer Size */
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
/* SMDKC100 has 1 banks of DRAM, we use only one in U-Boot */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE /* SDRAM Bank #1 */
#define CONFIG_BOOTCOMMAND "fatload mmc 0 40007000 uImage; bootm 40007000"
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
-
/* SMDKV310 has 4 bank of DRAM */
#define SDRAM_BANK_SIZE (512UL << 20UL) /* 512 MB */
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define I2C_DELAY udelay(2)
/* Boot options */
-#define CONFIG_SYS_LOAD_ADDR 0x23000000
#define CONFIG_BOOTP_BOOTFILESIZE
/* UARTs/Serial console */
/* Boot options */
-#define CONFIG_SYS_LOAD_ADDR 0x23000000
#define CONFIG_BOOTP_BOOTFILESIZE
* Boot
*/
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
#define CONFIG_BOOTCOMMAND \
"setenv boot_mmc_part ${kernel_mmc_part}; " \
"if test reboot-${reboot-mode} = reboot-r; then " \
#include <asm/arch/base_addr_a10.h>
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/*
* U-Boot general configurations
*/
#define CONFIG_BOOT_RETRY_TIME 45
#define CONFIG_RESET_TO_RETRY
-#define CONFIG_SYS_LOAD_ADDR CONFIG_KM_KERNEL_ADDR
-
/*
* FPGA Remote Update related environment
*
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
/* Booting Linux */
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
/* Environment is in MMC */
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
/* Booting Linux */
#define CONFIG_BOOTFILE "zImage"
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
/* Ethernet on SoC (EMAC) */
#if defined(CONFIG_CMD_NET)
/* Booting Linux */
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTCOMMAND "run mmc_mmc"
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
/* Environment is in MMC */
* U-Boot general configurations
*/
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_LOAD_ADDR 0x2000000
#define CONFIG_REMAKE_ELF
/* sysmgr.boot_scratch_cold4 & 5 (64bit) will be used for PSCI_CPU_ON call */
#define CPU_RELEASE_ADDR 0xFFD12210
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCDK */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SoCrates */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* The rest of the configuration is shared */
#include <configs/socfpga_common.h>
/* Memory configurations */
#define PHYS_SDRAM_1_SIZE 0x40000000 /* 1GiB on SR1500 */
-/* Booting Linux */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
-
/* Ethernet on SoC (EMAC) */
#define CONFIG_PHY_INTERFACE_MODE PHY_INTERFACE_MODE_RGMII
/* The PHY is autodetected, so no MII PHY address is needed here */
#define CONFIG_BOOTFILE "fitImage"
#define CONFIG_BOOTCOMMAND "run selboot"
#define CONFIG_SYS_BOOTM_LEN 0x2000000 /* 32 MiB */
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
/* Ethernet on SoC (EMAC) */
/*
* Miscellaneous configurable options
*/
-#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
/*
* For booting Linux, the board info and command line data
*/
#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN SZ_2M
#define PHYS_SDRAM_1 0x40000000
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
#define PHYS_SDRAM_1_SIZE 0x3E000000
-#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM_1 /* default load addr */
#define CONFIG_SYS_HZ_CLOCK 1000000000 /* 1 GHz */
/*
* Configuration of the external SDRAM memory
*/
-#define CONFIG_SYS_LOAD_ADDR 0x90400000
#define CONFIG_SYS_MAX_FLASH_SECT 12
#define CONFIG_SYS_MAX_FLASH_BANKS 2
/*
* Configuration of the external SDRAM memory
*/
-#define CONFIG_SYS_LOAD_ADDR 0x00400000
#define CONFIG_SYS_MAX_FLASH_SECT 12
#define CONFIG_SYS_MAX_FLASH_BANKS 2
/*
* Configuration of the external SDRAM memory
*/
-#define CONFIG_SYS_LOAD_ADDR 0x00400000
#define CONFIG_SYS_MAX_FLASH_SECT 12
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_FLASH_BASE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR 0x20050000
-#ifdef CONFIG_SUPPORT_SPL
-#define CONFIG_SYS_LOAD_ADDR 0x08008000
-#else
-#define CONFIG_SYS_LOAD_ADDR 0xC0400000
-#endif
-
/*
* Configuration of the external SDRAM memory
*/
#define CONFIG_SYS_FLASH_BASE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR 0x24040000
-/*
- * Configuration of the external SDRAM memory
- */
-#define CONFIG_SYS_LOAD_ADDR 0xD0400000
-
#define CONFIG_SYS_HZ_CLOCK 1000000
#define CONFIG_CMDLINE_TAG
#define CONFIG_SYS_FLASH_BASE 0x08000000
#define CONFIG_SYS_INIT_SP_ADDR 0x24040000
-/*
- * Configuration of the external SDRAM memory
- */
-#define CONFIG_SYS_LOAD_ADDR 0xD0400000
-
#define CONFIG_SYS_HZ_CLOCK 1000000
#define CONFIG_CMDLINE_TAG
#define CONFIG_SYS_FLASH_BASE 0x90000000
#define CONFIG_SYS_INIT_SP_ADDR 0x24040000
-/*
- * Configuration of the external SDRAM memory
- */
-#define CONFIG_SYS_LOAD_ADDR 0xC1800000
-
#define CONFIG_SYS_HZ_CLOCK 1000000
#define CONFIG_CMDLINE_TAG
*/
#define CONFIG_SYS_CBSIZE SZ_1K
-/*
- * default load address used for command tftp, bootm , loadb, ...
- */
-#define CONFIG_SYS_LOAD_ADDR 0xc2000000
-
/* ATAGs */
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000)
#define CONFIG_SYS_MBAR 0xFC000000
/*
#define CONFIG_SYS_CBSIZE 1024
/* MISC */
-#define CONFIG_SYS_LOAD_ADDR 0x00000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
#define CONFIG_SYS_INIT_RAM_ADDR 0x00190000
#define CONFIG_SYS_INIT_SP_OFFSET \
#ifdef CONFIG_MACH_SUN9I
#define SDRAM_OFFSET(x) 0x2##x
#define CONFIG_SYS_SDRAM_BASE 0x20000000
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* default load address */
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
* since it needs to fit in with the other values. By also #defining it
* we get warnings if the Kconfig value mismatches. */
#else
#define SDRAM_OFFSET(x) 0x4##x
#define CONFIG_SYS_SDRAM_BASE 0x40000000
-#define CONFIG_SYS_LOAD_ADDR 0x42000000 /* default load address */
/* V3s do not have enough memory to place code at 0x4a000000 */
/* Note SPL_STACK_R_ADDR is set through Kconfig, we include it here
* since it needs to fit in with the other values. By also #defining it
*/
#define CONFIG_SYS_INIT_SP_ADDR (0xe0000000) /* stack of init proccess */
#define CONFIG_SYS_MALLOC_LEN (0x01000000) /* 16Mbyte size of malloc() */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE /* default kernel load address */
/*
* Hardware drivers support
#define CONFIG_SYS_MAXARGS 32 /* max number of command */
/* args */
-/* memtest works on */
-
-#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default load */
- /* address */
/*
* AM3517 has 12 GP timers, they can be driven by the system clock
/* SPL related */
#endif
-/* load address */
-#define CONFIG_SYS_LOAD_ADDR 0x22000000
-
/* bootstrap in spi flash , u-boot + env + linux in nandflash */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_LEN SZ_128K
#define CONFIG_SYS_BOOTM_LEN SZ_32M
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
/*
* UART configuration
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x80080000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x01000000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x10000000\0" \
"pxefile_addr_r=0x10100000\0" \
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x80080000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
* ramdisk_addr_r simply shouldn't overlap anything else. Choosing 49M allows
* for the FDT/DTB to be up to 1M, which is hopefully plenty.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x81000000
#define MEM_LAYOUT_ENV_SETTINGS \
"scriptaddr=0x90000000\0" \
"pxefile_addr_r=0x90100000\0" \
#define CONFIG_BOOTP_BOOTFILESIZE
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (MEM_BASE)
/* Physical Memory Map */
#define PHYS_SDRAM_1 (MEM_BASE) /* SDRAM Bank #1 */
/* Console I/O Buffer Size */
#define CONFIG_SYS_CBSIZE 512
-#define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default */
-
/**
* Physical Memory Map
*/
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
-/*
- * Our DDR memory always starts at 0x80000000 and U-Boot shall have
- * relocated itself to higher in memory by the time this value is used.
- * However, set this to a 32MB offset to allow for easier Linux kernel
- * booting as the default is often used as the kernel load address.
- */
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
/*
* We setup defaults based on constraints from the Linux kernel, which should
* also be safe elsewhere. We have the default load at 32MB into DDR (for
#define CONFIG_PL011_CLOCK 7372800
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR 0x90000000
/* Physical Memory Map */
#define PHYS_SDRAM_1 0x80000000
#define CONFIG_SYS_BOOTPARAMS_LEN 0x20000
#define CONFIG_SYS_SDRAM_BASE 0xa0000000
-#define CONFIG_SYS_LOAD_ADDR 0xa1000000
#define CONFIG_SYS_INIT_RAM_ADDR 0xbd000000
#define CONFIG_SYS_INIT_RAM_SIZE 0x8000
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x4800000)
-
#define CONFIG_MACH_TYPE MACH_TYPE_TRATS
#define CONFIG_BOOTCOMMAND "run autoboot"
#define CONFIG_SYS_SDRAM_BASE 0x40000000
#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
-/* memtest works on */
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
#define CONFIG_BOOTCOMMAND "run autoboot"
/*
* Other required minimal configurations
*/
-#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
#define CONFIG_GATEWAYIP 192.168.11.1
#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_SYS_LOAD_ADDR 0x85000000
#define CONFIG_SYS_BOOTM_LEN (32 << 20)
#if defined(CONFIG_ARM64)
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
#endif
-#define CONFIG_SYS_LOAD_ADDR 0x22000000
-
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_BOOTCOMMAND "nboot 21000000 0"
#define CONFIG_EXTRA_ENV_SETTINGS \
/* Fuse */
#define CONFIG_FSL_IIM
-/* U-Boot memory offsets */
-#define CONFIG_SYS_LOAD_ADDR 0x72000000
-
/* Linux boot */
#define CONFIG_HOSTNAME "usbarmory"
#define CONFIG_BOOTCOMMAND \
/* Onboard devices */
#define CONFIG_SYS_MALLOC_LEN 0x1F0000
-#define CONFIG_SYS_LOAD_ADDR 0x00100000
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#if defined(CONFIG_SOC_LUTON) || defined(CONFIG_SOC_SERVAL)
"ramdisk_addr_r=0x46400000\0" \
"scriptaddr=0x46000000\0"
-#define CONFIG_SYS_LOAD_ADDR 0x40480000
-
/* Enable Distro Boot */
#ifndef CONFIG_SPL_BUILD
#define BOOT_TARGET_DEVICES(func) \
#define CONFIG_BOOTP_BOOTFILESIZE
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x10000000)
/* Physical Memory Map */
#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
#define CONFIG_BOOTP_BOOTFILESIZE
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
/* Physical Memory Map */
/* I2C Configs */
#define CONFIG_SYS_SPD_BUS_NUM 0
-
-#define CONFIG_SYS_LOAD_ADDR 0x82000000
-
/* We boot from the gfxRAM area of the OCRAM. */
#define CONFIG_BOARD_SIZE_LIMIT 520192
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
-
/* SerialFlash */
#ifdef CONFIG_CMD_SF
/* RAM */
#define CONFIG_SYS_SDRAM_BASE 0x80000000
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE + 0x100000
-
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
/* SPL */
#define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE
#define CONFIG_SYS_SDRAM_SIZE SZ_128M
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K)
-
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \
- GENERATED_GBL_DATA_SIZE)
"fdt_high=0x10000000\0" \
"initrd_high=0x10000000\0"
-#define CONFIG_SYS_LOAD_ADDR 0x1000000
#define CONFIG_UBI_PART user
#define CONFIG_UBIFS_VOLUME user
*/
#define CONFIG_SYS_CBSIZE 512
-#define CONFIG_SYS_LOAD_ADDR 0x20000000
-
/*-----------------------------------------------------------------------
* CPU Features
*/
/* Booting Linux */
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_BOOTCOMMAND "run ${bootpri} ; run ${bootsec}"
-#define CONFIG_SYS_LOAD_ADDR 0x42000000
/* Extra Environment */
#define CONFIG_HOSTNAME "xea"
* This can be any arbitrary address as we are using PIE, but
* please note, that CONFIG_SYS_TEXT_BASE must match the below.
*/
-#define CONFIG_SYS_LOAD_ADDR 0x40000000
#define CONFIG_LNX_KRNL_IMG_TEXT_OFFSET_BASE CONFIG_SYS_LOAD_ADDR
/* Size of malloc() pool */
#define CONFIG_BOOTP_MAY_FAIL
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR 0x8000000
/* Monitor Command Prompt */
/* Console I/O Buffer Size */
#endif
/* Miscellaneous configurable options */
-#define CONFIG_SYS_LOAD_ADDR 0x8000000
#if defined(CONFIG_ZYNQMP_USB)
#define DFU_DEFAULT_POLL_TIMEOUT 300
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
/* Boot configuration */
-#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
#define XTENSA_SYS_TEXT_ADDR \
(MEMADDR(CONFIG_SYS_MEMORY_SIZE) - CONFIG_SYS_MONITOR_LEN)
-/* Used by tftpboot; env var 'loadaddr' */
-#define CONFIG_SYS_LOAD_ADDR MEMADDR(0x02000000)
-
/*==============================*/
/* U-Boot general configuration */
/*==============================*/
* CFI FLASH driver setup
*/
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-
/*
* Size of malloc() pool
/* enable preboot to be loaded before CONFIG_BOOTDELAY */
/* Boot configuration */
-#define CONFIG_SYS_LOAD_ADDR 0 /* default? */
#ifdef CONFIG_SPL_BUILD
#define BOOTENV