]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
arm: socfpga: stratix10: Add SPL driver for Stratix10 SoC
authorLey Foon Tan <ley.foon.tan@intel.com>
Wed, 23 May 2018 16:17:28 +0000 (00:17 +0800)
committerMarek Vasut <marex@denx.de>
Thu, 12 Jul 2018 07:22:12 +0000 (09:22 +0200)
Add SPL driver support for Stratix SoC

Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
arch/arm/mach-socfpga/Makefile
arch/arm/mach-socfpga/include/mach/firewall_s10.h [new file with mode: 0644]
arch/arm/mach-socfpga/spl_s10.c [new file with mode: 0644]

index e8a1c0f45a711b33a87fb0372548ab0682c29c9c..3131949d68b2d6a76ce4f7a25fbc14b368e13cdc 100644 (file)
@@ -38,6 +38,7 @@ obj-y += system_manager_s10.o
 obj-y  += wrap_pinmux_config_s10.o
 obj-y  += wrap_pll_config_s10.o
 endif
+
 ifdef CONFIG_SPL_BUILD
 ifdef CONFIG_TARGET_SOCFPGA_GEN5
 obj-y  += spl_gen5.o
@@ -49,6 +50,9 @@ endif
 ifdef CONFIG_TARGET_SOCFPGA_ARRIA10
 obj-y  += spl_a10.o
 endif
+ifdef CONFIG_TARGET_SOCFPGA_STRATIX10
+obj-y  += spl_s10.o
+endif
 endif
 
 ifdef CONFIG_TARGET_SOCFPGA_GEN5
diff --git a/arch/arm/mach-socfpga/include/mach/firewall_s10.h b/arch/arm/mach-socfpga/include/mach/firewall_s10.h
new file mode 100644 (file)
index 0000000..b96f779
--- /dev/null
@@ -0,0 +1,120 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2017-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#ifndef        _FIREWALL_S10_
+#define        _FIREWALL_S10_
+
+struct socfpga_firwall_l4_per {
+       u32     nand;           /* 0x00 */
+       u32     nand_data;
+       u32     _pad_0x8;
+       u32     usb0;
+       u32     usb1;           /* 0x10 */
+       u32     _pad_0x14;
+       u32     _pad_0x18;
+       u32     spim0;
+       u32     spim1;          /* 0x20 */
+       u32     spis0;
+       u32     spis1;
+       u32     emac0;
+       u32     emac1;          /* 0x30 */
+       u32     emac2;
+       u32     _pad_0x38;
+       u32     _pad_0x3c;
+       u32     sdmmc;          /* 0x40 */
+       u32     gpio0;
+       u32     gpio1;
+       u32     _pad_0x4c;
+       u32     i2c0;           /* 0x50 */
+       u32     i2c1;
+       u32     i2c2;
+       u32     i2c3;
+       u32     i2c4;           /* 0x60 */
+       u32     timer0;
+       u32     timer1;
+       u32     uart0;
+       u32     uart1;          /* 0x70 */
+};
+
+struct socfpga_firwall_l4_sys {
+       u32     _pad_0x00;              /* 0x00 */
+       u32     _pad_0x04;
+       u32     dma_ecc;
+       u32     emac0rx_ecc;
+       u32     emac0tx_ecc;            /* 0x10 */
+       u32     emac1rx_ecc;
+       u32     emac1tx_ecc;
+       u32     emac2rx_ecc;
+       u32     emac2tx_ecc;            /* 0x20 */
+       u32     _pad_0x24;
+       u32     _pad_0x28;
+       u32     nand_ecc;
+       u32     nand_read_ecc;          /* 0x30 */
+       u32     nand_write_ecc;
+       u32     ocram_ecc;
+       u32     _pad_0x3c;
+       u32     sdmmc_ecc;              /* 0x40 */
+       u32     usb0_ecc;
+       u32     usb1_ecc;
+       u32     clock_manager;
+       u32     _pad_0x50;              /* 0x50 */
+       u32     io_manager;
+       u32     reset_manager;
+       u32     system_manager;
+       u32     osc0_timer;             /* 0x60 */
+       u32     osc1_timer;
+       u32     watchdog0;
+       u32     watchdog1;
+       u32     watchdog2;              /* 0x70 */
+       u32     watchdog3;
+};
+
+#define FIREWALL_L4_DISABLE_ALL                (BIT(0) | BIT(24) | BIT(16))
+#define FIREWALL_BRIDGE_DISABLE_ALL    (~0)
+
+/* Cache coherency unit (CCU) registers */
+#define CCU_CPU0_MPRT_ADBASE_DDRREG            0x4400
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE0         0x45c0
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1A                0x45e0
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1B                0x4600
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1C                0x4620
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1D                0x4640
+#define CCU_CPU0_MPRT_ADBASE_MEMSPACE1E                0x4660
+
+#define CCU_CPU0_MPRT_ADMASK_MEM_RAM0          0x4688
+
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE0          0x18560
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1A         0x18580
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1B         0x185a0
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1C         0x185c0
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1D         0x185e0
+#define CCU_IOM_MPRT_ADBASE_MEMSPACE1E         0x18600
+
+#define CCU_IOM_MPRT_ADMASK_MEM_RAM0           0x18628
+
+#define CCU_ADMASK_P_MASK                      BIT(0)
+#define CCU_ADMASK_NS_MASK                     BIT(1)
+
+#define CCU_ADBASE_DI_MASK                     BIT(4)
+
+#define CCU_REG_ADDR(reg)                      \
+       (SOCFPGA_CCU_ADDRESS + (reg))
+
+/* Firewall MPU DDR SCR registers */
+#define FW_MPU_DDR_SCR_EN                              0x00
+#define FW_MPU_DDR_SCR_EN_SET                          0x04
+#define FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMIT            0x18
+#define FW_MPU_DDR_SCR_MPUREGION0ADDR_LIMITEXT         0x1c
+#define FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMIT         0x98
+#define FW_MPU_DDR_SCR_NONMPUREGION0ADDR_LIMITEXT      0x9c
+
+#define MPUREGION0_ENABLE                              BIT(0)
+#define NONMPUREGION0_ENABLE                           BIT(8)
+
+#define FW_MPU_DDR_SCR_WRITEL(data, reg)               \
+       writel(data, SOCFPGA_FW_MPU_DDR_SCR_ADDRESS + (reg))
+
+#endif /* _FIREWALL_S10_ */
diff --git a/arch/arm/mach-socfpga/spl_s10.c b/arch/arm/mach-socfpga/spl_s10.c
new file mode 100644 (file)
index 0000000..69c2ee3
--- /dev/null
@@ -0,0 +1,199 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2016-2018 Intel Corporation <www.intel.com>
+ *
+ */
+
+#include <asm/io.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <common.h>
+#include <image.h>
+#include <spl.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/firewall_s10.h>
+#include <asm/arch/mailbox_s10.h>
+#include <asm/arch/reset_manager.h>
+#include <asm/arch/sdram_s10.h>
+#include <asm/arch/system_manager.h>
+#include <watchdog.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct socfpga_system_manager *sysmgr_regs =
+       (struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+u32 spl_boot_device(void)
+{
+       /* TODO: Get from SDM or handoff */
+       return BOOT_DEVICE_MMC1;
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(const u32 boot_device)
+{
+#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+       return MMCSD_MODE_FS;
+#else
+       return MMCSD_MODE_RAW;
+#endif
+}
+#endif
+
+void spl_disable_firewall_l4_per(void)
+{
+       const struct socfpga_firwall_l4_per *firwall_l4_per_base =
+               (struct socfpga_firwall_l4_per *)SOCFPGA_FIREWALL_L4_PER;
+       u32 i;
+       const u32 *addr[] = {
+                       &firwall_l4_per_base->nand,
+                       &firwall_l4_per_base->nand_data,
+                       &firwall_l4_per_base->usb0,
+                       &firwall_l4_per_base->usb1,
+                       &firwall_l4_per_base->spim0,
+                       &firwall_l4_per_base->spim1,
+                       &firwall_l4_per_base->emac0,
+                       &firwall_l4_per_base->emac1,
+                       &firwall_l4_per_base->emac2,
+                       &firwall_l4_per_base->sdmmc,
+                       &firwall_l4_per_base->gpio0,
+                       &firwall_l4_per_base->gpio1,
+                       &firwall_l4_per_base->i2c0,
+                       &firwall_l4_per_base->i2c1,
+                       &firwall_l4_per_base->i2c2,
+                       &firwall_l4_per_base->i2c3,
+                       &firwall_l4_per_base->i2c4,
+                       &firwall_l4_per_base->timer0,
+                       &firwall_l4_per_base->timer1,
+                       &firwall_l4_per_base->uart0,
+                       &firwall_l4_per_base->uart1
+                       };
+
+       /*
+        * The following lines of code will enable non-secure access
+        * to nand, usb, spi, emac, sdmmc, gpio, i2c, timers and uart. This
+        * is needed as most OS run in non-secure mode. Thus we need to
+        * enable non-secure access to these peripherals in order for the
+        * OS to use these peripherals.
+        */
+       for (i = 0; i < ARRAY_SIZE(addr); i++)
+               writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
+}
+
+void spl_disable_firewall_l4_sys(void)
+{
+       const struct socfpga_firwall_l4_sys *firwall_l4_sys_base =
+               (struct socfpga_firwall_l4_sys *)SOCFPGA_FIREWALL_L4_SYS;
+       u32 i;
+       const u32 *addr[] = {
+                       &firwall_l4_sys_base->dma_ecc,
+                       &firwall_l4_sys_base->emac0rx_ecc,
+                       &firwall_l4_sys_base->emac0tx_ecc,
+                       &firwall_l4_sys_base->emac1rx_ecc,
+                       &firwall_l4_sys_base->emac1tx_ecc,
+                       &firwall_l4_sys_base->emac2rx_ecc,
+                       &firwall_l4_sys_base->emac2tx_ecc,
+                       &firwall_l4_sys_base->nand_ecc,
+                       &firwall_l4_sys_base->nand_read_ecc,
+                       &firwall_l4_sys_base->nand_write_ecc,
+                       &firwall_l4_sys_base->ocram_ecc,
+                       &firwall_l4_sys_base->sdmmc_ecc,
+                       &firwall_l4_sys_base->usb0_ecc,
+                       &firwall_l4_sys_base->usb1_ecc,
+                       &firwall_l4_sys_base->clock_manager,
+                       &firwall_l4_sys_base->io_manager,
+                       &firwall_l4_sys_base->reset_manager,
+                       &firwall_l4_sys_base->system_manager,
+                       &firwall_l4_sys_base->watchdog0,
+                       &firwall_l4_sys_base->watchdog1,
+                       &firwall_l4_sys_base->watchdog2,
+                       &firwall_l4_sys_base->watchdog3
+               };
+
+       for (i = 0; i < ARRAY_SIZE(addr); i++)
+               writel(FIREWALL_L4_DISABLE_ALL, addr[i]);
+}
+
+void board_init_f(ulong dummy)
+{
+       const struct cm_config *cm_default_cfg = cm_get_default_config();
+       int ret;
+
+#ifdef CONFIG_HW_WATCHDOG
+       /* Ensure watchdog is paused when debugging is happening */
+       writel(SYSMGR_WDDBG_PAUSE_ALL_CPU, &sysmgr_regs->wddbg);
+
+       /* Enable watchdog before initializing the HW */
+       socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
+       socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
+       hw_watchdog_init();
+#endif
+
+       /* ensure all processors are not released prior Linux boot */
+       writeq(0, CPU_RELEASE_ADDR);
+
+       socfpga_per_reset(SOCFPGA_RESET(OSC1TIMER0), 0);
+       timer_init();
+
+       populate_sysmgr_pinmux();
+
+       /* configuring the HPS clocks */
+       cm_basic_init(cm_default_cfg);
+
+#ifdef CONFIG_DEBUG_UART
+       socfpga_per_reset(SOCFPGA_RESET(UART0), 0);
+       debug_uart_init();
+#endif
+       ret = spl_early_init();
+       if (ret) {
+               debug("spl_early_init() failed: %d\n", ret);
+               hang();
+       }
+
+       preloader_console_init();
+       cm_print_clock_quick_summary();
+
+       /* enable non-secure interface to DMA330 DMA and peripherals */
+       writel(SYSMGR_DMA_IRQ_NS | SYSMGR_DMA_MGR_NS, &sysmgr_regs->dma);
+       writel(SYSMGR_DMAPERIPH_ALL_NS, &sysmgr_regs->dma_periph);
+
+       spl_disable_firewall_l4_per();
+
+       spl_disable_firewall_l4_sys();
+
+       /* disable lwsocf2fpga and soc2fpga bridge security */
+       writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_SOC2FPGA);
+       writel(FIREWALL_BRIDGE_DISABLE_ALL, SOCFPGA_FIREWALL_LWSOC2FPGA);
+
+       /* disable SMMU security */
+       writel(FIREWALL_L4_DISABLE_ALL, SOCFPGA_FIREWALL_TCU);
+
+       /* disable ocram security at CCU for non secure access */
+       clrbits_le32(CCU_REG_ADDR(CCU_CPU0_MPRT_ADMASK_MEM_RAM0),
+                    CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
+       clrbits_le32(CCU_REG_ADDR(CCU_IOM_MPRT_ADMASK_MEM_RAM0),
+                    CCU_ADMASK_P_MASK | CCU_ADMASK_NS_MASK);
+
+       debug("DDR: Initializing Hard Memory Controller\n");
+       if (sdram_mmr_init_full(0)) {
+               puts("DDR: Initialization failed.\n");
+               hang();
+       }
+
+       gd->ram_size = sdram_calculate_size();
+       printf("DDR: %d MiB\n", (int)(gd->ram_size >> 20));
+
+       /* Sanity check ensure correct SDRAM size specified */
+       debug("DDR: Running SDRAM size sanity check\n");
+       if (get_ram_size(0, gd->ram_size) != gd->ram_size) {
+               puts("DDR: SDRAM size check failed!\n");
+               hang();
+       }
+       debug("DDR: SDRAM size check passed!\n");
+
+       mbox_init();
+
+#ifdef CONFIG_CADENCE_QSPI
+       mbox_qspi_open();
+#endif
+}