select OF_CONTROL
select SYS_CACHE_SHIFT_7
+config ARCH_ASPEED
+ bool "Support Aspeed SoCs"
+ select OF_CONTROL
+ select DM
+
endchoice
+source "arch/arm/mach-aspeed/Kconfig"
+
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-bcm283x/Kconfig"
# Machine directory name. This list is sorted alphanumerically
# by CONFIG_* macro name.
+machine-$(CONFIG_ARCH_ASPEED) += aspeed
machine-$(CONFIG_ARCH_AT91) += at91
machine-$(CONFIG_ARCH_BCM283X) += bcm283x
machine-$(CONFIG_ARCH_DAVINCI) += davinci
--- /dev/null
+/*
+ * Copyright (c) 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#ifndef _ASM_ARCH_TIMER_H
+#define _ASM_ARCH_TIMER_H
+
+/* Each timer has 4 control bits in ctrl1 register.
+ * Timer1 uses bits 0:3, Timer2 uses bits 4:7 and so on,
+ * such that timer X uses bits (4 * X - 4):(4 * X - 1)
+ * If the timer does not support PWM, bit 4 is reserved.
+ */
+#define AST_TMC_EN (1 << 0)
+#define AST_TMC_1MHZ (1 << 1)
+#define AST_TMC_OVFINTR (1 << 2)
+#define AST_TMC_PWM (1 << 3)
+
+/* Timers are counted from 1 in the datasheet. */
+#define AST_TMC_CTRL1_SHIFT(n) (4 * ((n) - 1))
+
+#define AST_TMC_RATE (1000*1000)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * All timers share control registers, which makes it harder to make them
+ * separate devices. Since only one timer is needed at the moment, making
+ * it this just one device.
+ */
+
+struct ast_timer_counter {
+ u32 status;
+ u32 reload_val;
+ u32 match1;
+ u32 match2;
+};
+
+struct ast_timer {
+ struct ast_timer_counter timers1[3];
+ u32 ctrl1;
+ u32 ctrl2;
+#ifdef CONFIG_ASPEED_AST2500
+ u32 ctrl3;
+ u32 ctrl1_clr;
+#else
+ u32 reserved[2];
+#endif
+ struct ast_timer_counter timers2[5];
+};
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_TIMER_H */
--- /dev/null
+/*
+ * (C) Copyright 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _ASM_ARCH_WDT_H
+#define _ASM_ARCH_WDT_H
+
+#define WDT_BASE 0x1e785000
+
+/*
+ * Special value that needs to be written to counter_restart register to
+ * (re)start the timer
+ */
+#define WDT_COUNTER_RESTART_VAL 0x4755
+
+/* Control register */
+#define WDT_CTRL_RESET_MODE_SHIFT 5
+#define WDT_CTRL_RESET_MODE_MASK 3
+
+#define WDT_CTRL_EN (1 << 0)
+#define WDT_CTRL_RESET (1 << 1)
+#define WDT_CTRL_CLK1MHZ (1 << 4)
+#define WDT_CTRL_2ND_BOOT (1 << 7)
+
+/* Values for Reset Mode */
+#define WDT_CTRL_RESET_SOC 0
+#define WDT_CTRL_RESET_CHIP 1
+#define WDT_CTRL_RESET_CPU 2
+#define WDT_CTRL_RESET_MASK 3
+
+/* Reset Mask register */
+#define WDT_RESET_ARM (1 << 0)
+#define WDT_RESET_COPROC (1 << 1)
+#define WDT_RESET_SDRAM (1 << 2)
+#define WDT_RESET_AHB (1 << 3)
+#define WDT_RESET_I2C (1 << 4)
+#define WDT_RESET_MAC1 (1 << 5)
+#define WDT_RESET_MAC2 (1 << 6)
+#define WDT_RESET_GCRT (1 << 7)
+#define WDT_RESET_USB20 (1 << 8)
+#define WDT_RESET_USB11_HOST (1 << 9)
+#define WDT_RESET_USB11_EHCI2 (1 << 10)
+#define WDT_RESET_VIDEO (1 << 11)
+#define WDT_RESET_HAC (1 << 12)
+#define WDT_RESET_LPC (1 << 13)
+#define WDT_RESET_SDSDIO (1 << 14)
+#define WDT_RESET_MIC (1 << 15)
+#define WDT_RESET_CRT2C (1 << 16)
+#define WDT_RESET_PWM (1 << 17)
+#define WDT_RESET_PECI (1 << 18)
+#define WDT_RESET_JTAG (1 << 19)
+#define WDT_RESET_ADC (1 << 20)
+#define WDT_RESET_GPIO (1 << 21)
+#define WDT_RESET_MCTP (1 << 22)
+#define WDT_RESET_XDMA (1 << 23)
+#define WDT_RESET_SPI (1 << 24)
+#define WDT_RESET_MISC (1 << 25)
+
+#ifndef __ASSEMBLY__
+struct ast_wdt {
+ u32 counter_status;
+ u32 counter_reload_val;
+ u32 counter_restart;
+ u32 ctrl;
+ u32 timeout_status;
+ u32 clr_timeout_status;
+ u32 reset_width;
+#ifdef CONFIG_ASPEED_AST2500
+ u32 reset_mask;
+#else
+ u32 reserved0;
+#endif
+};
+
+void wdt_stop(struct ast_wdt *wdt);
+void wdt_start(struct ast_wdt *wdt, u32 timeout);
+
+/**
+ * Reset peripherals specified by mask
+ *
+ * Note, that this is only supported by ast2500 SoC
+ *
+ * @wdt: watchdog to use for this reset
+ * @mask: reset mask.
+ */
+int ast_wdt_reset_masked(struct ast_wdt *wdt, u32 mask);
+
+/**
+ * ast_get_wdt() - get a pointer to watchdog registers
+ *
+ * @wdt_number: 0-based WDT peripheral number
+ * @return pointer to registers or -ve error on error
+ */
+struct ast_wdt *ast_get_wdt(u8 wdt_number);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_ARCH_WDT_H */
--- /dev/null
+if ARCH_ASPEED
+
+config SYS_ARCH
+ default "arm"
+
+config SYS_SOC
+ default "aspeed"
+
+config SYS_TEXT_BASE
+ default 0x00000000
+
+config ASPEED_AST2500
+ bool "Support Aspeed AST2500 SoC"
+ select CPU_ARM1176
+ help
+ The Aspeed AST2500 is a ARM-based SoC with arm1176 CPU.
+ It is used as Board Management Controller on many server boards,
+ which is enabled by support of LPC and eSPI peripherals.
+
+config WDT_NUM
+ int "Number of Watchdog Timers"
+ default 3 if ASPEED_AST2500
+ help
+ The number of Watchdot Timers on a SoC.
+ AST2500 has three WDTsk earlier versions have two or fewer.
+
+endif
--- /dev/null
+#
+# Copyright (c) 2016 Google, Inc
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-$(CONFIG_ARCH_ASPEED) += ast_wdt.o
--- /dev/null
+/*
+ * (C) Copyright 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/wdt.h>
+#include <linux/err.h>
+
+void wdt_stop(struct ast_wdt *wdt)
+{
+ clrbits_le32(&wdt->ctrl, WDT_CTRL_EN);
+}
+
+void wdt_start(struct ast_wdt *wdt, u32 timeout)
+{
+ writel(timeout, &wdt->counter_reload_val);
+ writel(WDT_COUNTER_RESTART_VAL, &wdt->counter_restart);
+ /*
+ * Setting CLK1MHZ bit is just for compatibility with ast2400 part.
+ * On ast2500 watchdog timer clock is fixed at 1MHz and the bit is
+ * read-only
+ */
+ setbits_le32(&wdt->ctrl,
+ WDT_CTRL_EN | WDT_CTRL_RESET | WDT_CTRL_CLK1MHZ);
+}
+
+struct ast_wdt *ast_get_wdt(u8 wdt_number)
+{
+ if (wdt_number > CONFIG_WDT_NUM - 1)
+ return ERR_PTR(-EINVAL);
+
+ return (struct ast_wdt *)(WDT_BASE +
+ sizeof(struct ast_wdt) * wdt_number);
+}
+
+int ast_wdt_reset_masked(struct ast_wdt *wdt, u32 mask)
+{
+#ifdef CONFIG_ASPEED_AST2500
+ if (!mask)
+ return -EINVAL;
+
+ writel(mask, &wdt->reset_mask);
+ clrbits_le32(&wdt->ctrl,
+ WDT_CTRL_RESET_MASK << WDT_CTRL_RESET_MODE_SHIFT);
+ wdt_start(wdt, 1);
+
+ /* Wait for WDT to reset */
+ while (readl(&wdt->ctrl) & WDT_CTRL_EN)
+ ;
+ wdt_stop(wdt);
+
+ return 0;
+#else
+ return -EINVAL;
+#endif
+}
obj-$(CONFIG_SANDBOX) += sysreset_sandbox.o
obj-$(CONFIG_ARCH_SNAPDRAGON) += sysreset_snapdragon.o
obj-$(CONFIG_TARGET_XTFPGA) += sysreset_xtfpga.o
+obj-$(CONFIG_ARCH_ASPEED) += sysreset_ast.o
--- /dev/null
+/*
+ * (C) Copyright 2016 Google, Inc
+ *
+ * SPDX-License-Identifier: GPL-2.0
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <sysreset.h>
+#include <asm/io.h>
+#include <asm/arch/wdt.h>
+#include <linux/err.h>
+
+/* Number of Watchdog Timer ticks before reset */
+#define AST_WDT_RESET_TIMEOUT 10
+#define AST_WDT_FOR_RESET 0
+
+static int ast_sysreset_request(struct udevice *dev, enum sysreset_t type)
+{
+ struct ast_wdt *wdt = ast_get_wdt(AST_WDT_FOR_RESET);
+ u32 reset_mode = 0;
+
+ if (IS_ERR(wdt))
+ return PTR_ERR(wdt);
+
+ switch (type) {
+ case SYSRESET_WARM:
+ reset_mode = WDT_CTRL_RESET_CPU;
+ break;
+ case SYSRESET_COLD:
+ reset_mode = WDT_CTRL_RESET_CHIP;
+ break;
+ default:
+ return -EPROTONOSUPPORT;
+ }
+
+ /* Clear reset mode bits */
+ clrsetbits_le32(&wdt->ctrl,
+ (WDT_CTRL_RESET_MODE_MASK << WDT_CTRL_RESET_MODE_SHIFT),
+ (reset_mode << WDT_CTRL_RESET_MODE_SHIFT));
+ wdt_start(wdt, AST_WDT_RESET_TIMEOUT);
+
+ return -EINPROGRESS;
+}
+
+static struct sysreset_ops ast_sysreset = {
+ .request = ast_sysreset_request,
+};
+
+U_BOOT_DRIVER(sysreset_ast) = {
+ .name = "ast_sysreset",
+ .id = UCLASS_SYSRESET,
+ .ops = &ast_sysreset,
+};
help
Select this to enable an timer for Omap devices.
+config AST_TIMER
+ bool "Aspeed ast2400/ast2500 timer support"
+ depends on TIMER
+ default y if ARCH_ASPEED
+ help
+ Select this to enable timer for Aspeed ast2400/ast2500 devices.
+ This is a simple sys timer driver, it is compatible with lib/time.c,
+ but does not support any interrupts. Even though SoC has 8 hardware
+ counters, they are all treated as a single device by this driver.
+ This is mostly because they all share several registers which
+ makes it difficult to completely separate them.
+
endmenu
obj-$(CONFIG_SANDBOX_TIMER) += sandbox_timer.o
obj-$(CONFIG_X86_TSC_TIMER) += tsc_timer.o
obj-$(CONFIG_OMAP_TIMER) += omap-timer.o
+obj-$(CONFIG_AST_TIMER) += ast_timer.o
--- /dev/null
+/*
+ * Copyright 2016 Google Inc.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <timer.h>
+#include <asm/io.h>
+#include <asm/arch/timer.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define AST_TICK_TIMER 1
+#define AST_TMC_RELOAD_VAL 0xffffffff
+
+struct ast_timer_priv {
+ struct ast_timer *regs;
+ struct ast_timer_counter *tmc;
+};
+
+static struct ast_timer_counter *ast_get_timer_counter(struct ast_timer *timer,
+ int n)
+{
+ if (n > 3)
+ return &timer->timers2[n - 4];
+ else
+ return &timer->timers1[n - 1];
+}
+
+static int ast_timer_probe(struct udevice *dev)
+{
+ struct ast_timer_priv *priv = dev_get_priv(dev);
+ struct timer_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+
+ writel(AST_TMC_RELOAD_VAL, &priv->tmc->reload_val);
+
+ /*
+ * Stop the timer. This will also load reload_val into
+ * the status register.
+ */
+ clrbits_le32(&priv->regs->ctrl1,
+ AST_TMC_EN << AST_TMC_CTRL1_SHIFT(AST_TICK_TIMER));
+ /* Start the timer from the fixed 1MHz clock. */
+ setbits_le32(&priv->regs->ctrl1,
+ (AST_TMC_EN | AST_TMC_1MHZ) <<
+ AST_TMC_CTRL1_SHIFT(AST_TICK_TIMER));
+
+ uc_priv->clock_rate = AST_TMC_RATE;
+
+ return 0;
+}
+
+static int ast_timer_get_count(struct udevice *dev, u64 *count)
+{
+ struct ast_timer_priv *priv = dev_get_priv(dev);
+
+ *count = AST_TMC_RELOAD_VAL - readl(&priv->tmc->status);
+
+ return 0;
+}
+
+static int ast_timer_ofdata_to_platdata(struct udevice *dev)
+{
+ struct ast_timer_priv *priv = dev_get_priv(dev);
+
+ priv->regs = dev_get_addr_ptr(dev);
+ if (IS_ERR(priv->regs))
+ return PTR_ERR(priv->regs);
+
+ priv->tmc = ast_get_timer_counter(priv->regs, AST_TICK_TIMER);
+
+ return 0;
+}
+
+static const struct timer_ops ast_timer_ops = {
+ .get_count = ast_timer_get_count,
+};
+
+static const struct udevice_id ast_timer_ids[] = {
+ { .compatible = "aspeed,ast2500-timer" },
+ { .compatible = "aspeed,ast2400-timer" },
+ { }
+};
+
+U_BOOT_DRIVER(ast_timer) = {
+ .name = "ast_timer",
+ .id = UCLASS_TIMER,
+ .of_match = ast_timer_ids,
+ .probe = ast_timer_probe,
+ .priv_auto_alloc_size = sizeof(struct ast_timer_priv),
+ .ofdata_to_platdata = ast_timer_ofdata_to_platdata,
+ .ops = &ast_timer_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
projects / u-boot.git / commitdiff