]> git.dujemihanovic.xyz Git - u-boot.git/commitdiff
TQM85xx: Fix chip select configuration for second FLASH bank
authorWolfgang Grandegger <wg@grandegger.com>
Thu, 5 Jun 2008 11:12:03 +0000 (13:12 +0200)
committerAndrew Fleming-AFLEMING <afleming@freescale.com>
Wed, 11 Jun 2008 04:58:26 +0000 (23:58 -0500)
This patch fixes the re-calculation of the automatic chip select
configuration for boards with two populated FLASH banks.

Signed-off-by: Martin Krause <martin.krause@tqs.de>
board/tqc/tqm85xx/tqm85xx.c

index af8c170b3614b43bb3c15028cbfd2d0482d340e1..a45df2b734f4d87ecf93f08a6676565984b77d31 100644 (file)
@@ -275,52 +275,60 @@ int misc_init_r (void)
        gd->bd->bi_flashoffset = 0;
 
        /*
-        * Check if boot FLASH isn't max size
+        * Recalculate CS configuration if second FLASH bank is available
         */
-       if (gd->bd->bi_flashsize < (0 - CFG_FLASH0)) {
-               memctl->or0 =
-                   gd->bd->bi_flashstart | (CFG_OR0_PRELIM & 0x00007fff);
-               memctl->br0 =
-                   gd->bd->bi_flashstart | (CFG_BR0_PRELIM & 0x00007fff);
-
+       if (flash_info[0].size > 0) {
+               memctl->or1 = ((-flash_info[0].size) & 0xffff8000) |
+                       (CFG_OR1_PRELIM & 0x00007fff);
+               memctl->br1 = gd->bd->bi_flashstart |
+                       (CFG_BR1_PRELIM & 0x00007fff);
                /*
-                * Re-check to get correct base address
+                * Re-check to get correct base address for bank 1
                 */
-               flash_get_size (gd->bd->bi_flashstart, CFG_MAX_FLASH_BANKS - 1);
+               flash_get_size (gd->bd->bi_flashstart, 0);
+       } else {
+               memctl->or1 = 0;
+               memctl->br1 = 0;
        }
 
        /*
-        * Check if only one FLASH bank is available
+        *  If bank 1 is equipped, bank 0 is mapped after bank 1
         */
-       if (gd->bd->bi_flashsize != CFG_MAX_FLASH_BANKS * (0 - CFG_FLASH0)) {
-               memctl->or1 = 0;
-               memctl->br1 = 0;
+       memctl->or0 = ((-flash_info[1].size) & 0xffff8000) |
+               (CFG_OR0_PRELIM & 0x00007fff);
+       memctl->br0 = (gd->bd->bi_flashstart + flash_info[0].size) |
+               (CFG_BR0_PRELIM & 0x00007fff);
+       /*
+        * Re-check to get correct base address for bank 0
+        */
+       flash_get_size (gd->bd->bi_flashstart + flash_info[0].size, 1);
 
-               /*
-                * Re-do flash protection upon new addresses
-                */
-               flash_protect (FLAG_PROTECT_CLEAR,
-                              gd->bd->bi_flashstart, 0xffffffff,
-                              &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-               /* Monitor protection ON by default */
-               flash_protect (FLAG_PROTECT_SET,
-                              CFG_MONITOR_BASE,
-                              CFG_MONITOR_BASE + monitor_flash_len - 1,
-                              &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-               /* Environment protection ON by default */
-               flash_protect (FLAG_PROTECT_SET,
-                              CFG_ENV_ADDR,
-                              CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
-                              &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-
-               /* Redundant environment protection ON by default */
-               flash_protect (FLAG_PROTECT_SET,
-                              CFG_ENV_ADDR_REDUND,
-                              CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
-                              &flash_info[CFG_MAX_FLASH_BANKS - 1]);
-       }
+       /*
+        * Re-do flash protection upon new addresses
+        */
+       flash_protect (FLAG_PROTECT_CLEAR,
+                      gd->bd->bi_flashstart, 0xffffffff,
+                      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+       /* Monitor protection ON by default */
+       flash_protect (FLAG_PROTECT_SET,
+                      CFG_MONITOR_BASE,
+                      CFG_MONITOR_BASE + monitor_flash_len - 1,
+                      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+       /* Environment protection ON by default */
+       flash_protect (FLAG_PROTECT_SET,
+                      CFG_ENV_ADDR,
+                      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+                      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+
+#ifdef CFG_ENV_ADDR_REDUND
+       /* Redundant environment protection ON by default */
+       flash_protect (FLAG_PROTECT_SET,
+                      CFG_ENV_ADDR_REDUND,
+                      CFG_ENV_ADDR_REDUND + CFG_ENV_SIZE_REDUND - 1,
+                      &flash_info[CFG_MAX_FLASH_BANKS - 1]);
+#endif
 
        return 0;
 }