km-arm: i2c support for suenx based boards

This patch renames the suen3 defines and functions to KM_KIRKWOOD
which is more generic and more precise, because these values
and functions where used by all suenX boards and not only suen3.

Signed-off-by: Lukas Roggli <lukas.roggli@keymile.com>
Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
Signed-off-by: Heiko Schocher <hs@denx.de>
cc: Prafulla Wadaskar <prafulla@marvell.com>

diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index 7c4347540856884799b55c047213818046b39420..0f1a6d1d7ac779ea433608e57390f4e2b98f30b5 100644 (file)
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -93,7 +93,7 @@ u32 kwmpp_config[] = {
        MPP41_GPIO,             /* Piggy3 LED[4] */
        MPP42_GPIO,             /* Piggy3 LED[5] */
        MPP43_GPIO,             /* Piggy3 LED[6] */
-       MPP44_GPIO,             /* Piggy3 LED[7] */
+       MPP44_GPIO,             /* Piggy3 LED[7], BIST_EN_L */
        MPP45_GPIO,             /* Piggy3 LED[8] */
        MPP46_GPIO,             /* Reserved */
        MPP47_GPIO,             /* Reserved */
@@ -155,14 +155,14 @@ int board_early_init_f(void)
 
 #if defined(CONFIG_SOFT_I2C)
        /* init the GPIO for I2C Bitbang driver */
-       kw_gpio_set_valid(SUEN3_SDA_PIN, 1);
-       kw_gpio_set_valid(SUEN3_SCL_PIN, 1);
-       kw_gpio_direction_output(SUEN3_SDA_PIN, 0);
-       kw_gpio_direction_output(SUEN3_SCL_PIN, 0);
+       kw_gpio_set_valid(KM_KIRKWOOD_SDA_PIN, 1);
+       kw_gpio_set_valid(KM_KIRKWOOD_SCL_PIN, 1);
+       kw_gpio_direction_output(KM_KIRKWOOD_SDA_PIN, 0);
+       kw_gpio_direction_output(KM_KIRKWOOD_SCL_PIN, 0);
 #endif
 #if defined(CONFIG_SYS_EEPROM_WREN)
-       kw_gpio_set_valid(SUEN3_ENV_WP, 38);
-       kw_gpio_direction_output(SUEN3_ENV_WP, 1);
+       kw_gpio_set_valid(KM_KIRKWOOD_ENV_WP, 38);
+       kw_gpio_direction_output(KM_KIRKWOOD_ENV_WP, 1);
 #endif
 
        return 0;
@@ -315,15 +315,15 @@ int get_sda(void)
 
 int get_scl(void)
 {
-       return (kw_gpio_get_value(SUEN3_SCL_PIN) ? 1 : 0);
+       return kw_gpio_get_value(KM_KIRKWOOD_SCL_PIN) ? 1 : 0;
 }
 #endif
 
 #if defined(CONFIG_SYS_EEPROM_WREN)
 int eeprom_write_enable(unsigned dev_addr, int state)
 {
-       kw_gpio_set_value(SUEN3_ENV_WP, !state);
+       kw_gpio_set_value(KM_KIRKWOOD_ENV_WP, !state);
 
-       return !kw_gpio_get_value(SUEN3_ENV_WP);
+       return !kw_gpio_get_value(KM_KIRKWOOD_ENV_WP);
 }
 #endif

diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h
index 2e38c12baff72bf3863070ba6355ce7166936b56..5fa0153e3b08e81f7c338c35671737067cc4759d 100644 (file)
--- a/include/configs/km_arm.h
+++ b/include/configs/km_arm.h
@@ -179,15 +179,15 @@ void set_sda (int state);
 void set_scl (int state);
 int get_sda (void);
 int get_scl (void);
-#define SUEN3_SDA_PIN  8
-#define SUEN3_SCL_PIN  9
-#define SUEN3_ENV_WP   38
-
-#define I2C_ACTIVE     __set_direction(SUEN3_SDA_PIN, 0)
-#define I2C_TRISTATE   __set_direction(SUEN3_SDA_PIN, 1)
-#define I2C_READ       (kw_gpio_get_value(SUEN3_SDA_PIN) ? 1 : 0)
-#define I2C_SDA(bit)   kw_gpio_set_value(SUEN3_SDA_PIN, bit);
-#define I2C_SCL(bit)   kw_gpio_set_value(SUEN3_SCL_PIN, bit);
+#define KM_KIRKWOOD_SDA_PIN    8
+#define KM_KIRKWOOD_SCL_PIN    9
+#define KM_KIRKWOOD_ENV_WP     38
+
+#define I2C_ACTIVE     __set_direction(KM_KIRKWOOD_SDA_PIN, 0)
+#define I2C_TRISTATE   __set_direction(KM_KIRKWOOD_SDA_PIN, 1)
+#define I2C_READ       (kw_gpio_get_value(KM_KIRKWOOD_SDA_PIN) ? 1 : 0)
+#define I2C_SDA(bit)   kw_gpio_set_value(KM_KIRKWOOD_SDA_PIN, bit)
+#define I2C_SCL(bit)   kw_gpio_set_value(KM_KIRKWOOD_SCL_PIN, bit)
 #endif
 
 #define I2C_DELAY      udelay(3)       /* 1/4 I2C clock duration */