sunxi: clock: H6/H616: Add resistor calibration

BSP boot0 executes resistor calibration before clocks are initialized.
Let's do that.

Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>

diff --git a/arch/arm/mach-sunxi/clock_sun50i_h6.c b/arch/arm/mach-sunxi/clock_sun50i_h6.c
index e5846e6381ff42a468c81b172fe1a3d7354d9269..32119ad16555246c3122a570a2efda443b0ccd99 100644 (file)
--- a/arch/arm/mach-sunxi/clock_sun50i_h6.c
+++ b/arch/arm/mach-sunxi/clock_sun50i_h6.c
@@ -12,9 +12,14 @@ void clock_init_safe(void)
        struct sunxi_prcm_reg *const prcm =
                (struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
 
-       /* this seems to enable PLLs on H616 */
-       if (IS_ENABLED(CONFIG_MACH_SUN50I_H616))
+       if (IS_ENABLED(CONFIG_MACH_SUN50I_H616)) {
+               /* this seems to enable PLLs on H616 */
                setbits_le32(&prcm->sys_pwroff_gating, 0x10);
+               setbits_le32(&prcm->res_cal_ctrl, 2);
+       }
+
+       clrbits_le32(&prcm->res_cal_ctrl, 1);
+       setbits_le32(&prcm->res_cal_ctrl, 1);
 
        clock_set_pll1(408000000);